Fd32-fd33 problem

Hello,
Although in FBL5N report the special liebl. of a customer seen as u2018u2019zerou2019u2019, in FD32 (credit management screen)  some values seen in the field special debits.
What can be the reason for this? This problem occurs only for one customer. For other customers there is no problem. Where should I check?
Best regards,
deniz

Hi,
Thanks.Everythink is ok.
Best regards,
deniz

Similar Messages

  • FD31/FD32/FD33

    Hi Gurus,
                 Could any one let me know what is the logic used to calculate arrear in FD31/FD32/FD33 transactions.How arrear is calculated  in these transactions.
    Regards,
    Ashok...

    Hi Christian,
    So your client made an enhancement to KNKK table.
    Does the field appeared automatically in FD32 transaction (for instance) or did you needed to do any other enhancement, like changing the view for instance ?
    I have an specific KPI to put in the view status and so, since i don't have any other standard field that i can use, i need to add a specific one....
    Thanks in advance.
    Best Regards,
    Bruno Sousa

  • Attachment List - FD32/FD33

    Hi...
    I want create a copy from Customer for new credit control area, but I need copy the Attachment List too (transaction FD32).
    It's possible? How?
    Thanks...

    Hi...
    I want create a copy from Customer for new credit control area, but I need copy the Attachment List too (transaction FD32).
    It's possible? How?
    Thanks...

  • FD32 Credit management 'sales value'

    I am on SAP ERP, I'm trying to figure out how to pull the data that makes up the credit exposure - 'SALES VALUE.'  I believe the sale value includes all undelivered or only partially delivered orders.  I can not find a way to confirm what makes up the total sales value.  How would i oull that detail?
    Thanks in advance for your assistance!

    check oss note 378833.. it has loads of information.
    It is difficult to analyze incorrect open credit values:
    The open credit values are updated in Sales Information System (SIS) structures. The structures cumulate values due to common characteristics. Due to the cumulation, you cannot find out subsequently which documents caused the values.
    The system generates and reduces open credit values in the SD document chain. The system posts the credit value to the SIS structure and clears it later. This may cause differences between the posted value and the cleared value.
    See Note 377165 for a detailed description about updating open credit values.
    To correct the incorrect open credit values, proceed as follows:
    1. Correct known errors that occur in the update of the open credit values. To do this, check the relevant composite SAP Notes and implement the relevant corrections in your system if you have not yet imported a Support Package that contains them.
    1176872 Composite SAP Note: Incorrect credit update, 60*
      735791 Composite SAP Note: Credit update incorrect, 500
      735163 Composite SAP Note: Incorrect credit update, Release 4.70
      410685 Composite SAP Note: Incorrect credit update, 4.6B/C
      385481 Composite SAP Note: Incorrect credit update, 4.5B
      385091 Composite SAP Note: Incorrect credit update, Release 4.0B
      364928 Composite SAP Note: Incorrect credit update, Release 3.1I
    2. Use composite SAP Note 425523 to check that there is no explanation for the update that you observed.
    3. Check whether incorrect open credit values exist in your system. To do this, compare the sales values in transaction FD32/FD33 (status view) with the results of the report RVKRED88 which you run for the same credit customer and credit control area.
    4. Check whether the incorrect update is caused by user exits or by modifications in your system. The following notes describe possible sources of errors in customer-defined source code.
      216448  BW/SIS: Incorrect update / SD user exit
      178328  Problems due to incorrect user exits in SD
    5. Use the report RVKRED77 to correct the open credit values. For more information about the report, see Note 400311 (or the documentation of the report in your system) and Note 363343 or Note 755395.
    To determine the reason for the incorrect open credit values and to reproduce the error, proceed as follows. Reproducing the error in the test system is a basic prerequisite for analyzing and correcting the problem.
    1. Monitor the open credit values to find out when incorrect values occur. To do this, compare the sales values in transaction FD32/FD33 with the results of the report RVKRED88 again.
    2. Identify the documents that were created or changed since the last run of the correction report RVKRED77 in accordance with Note 389377. One of these documents must have caused the incorrect credit values.
    3. Try to determine which document caused these values. To reproduce the problem on your test system, use the same data as in the document that is causing the incorrect values.
    4. Use transaction MC30 (as described in Note 381789) to check the update of the open credit values after a document is posted.
    5. Use Note 1042857 "Logging credit values" to log the update of the credit values so that you can evaluate this later.
    If you can reproduce the error in your test system but there is no explanation for the update you observed, open a customer message with logon data, sample data, a detailed description of the procedure and the relevant contact person.

  • FI-AR-CR: Adding new custom field to FD32

    Hi,
    We need to add a custom field to FD31/FD32/FD33 transaction that is going to be feed by another develpment that we have.
    I searched in customizing but no luck. I found some info that i need to do one (or both) steps:
    1) Add a screen field to the  standard SAP program (namely SAPMF02C and screen 0210);
    2) Enhance an user exit, for instance FI_DUZI_ROUND_CML (Rounding in Accordance with Contract Conditions)
    Do you guys have any other idea ?
    The first option needs that the standard veiw to be changed so we are trying to found different options...
    Best Regards,
    Bruno Sousa

    Hi Christian,
    So your client made an enhancement to KNKK table.
    Does the field appeared automatically in FD32 transaction (for instance) or did you needed to do any other enhancement, like changing the view for instance ?
    I have an specific KPI to put in the view status and so, since i don't have any other standard field that i can use, i need to add a specific one....
    Thanks in advance.
    Best Regards,
    Bruno Sousa

  • How to Release the blocked Sales orders?

    Hi Gurus,
      Requirement: To Release the Blocked Salesorders
      problem: find out  any Tables  and procedure  to release blocked SO(allow to creating delivery for SO).
    how to Customer CreditLimit  and  Tables  of Theses...............
    Thanks in Advance..
    sivakumar.kasa

    Hi..
    AS per i knew......
    how to know cutomer CreditLimit?
    FD32,FD33...tcodes
    how to release blocked Sales order?
    VKM3
    Wait for some other views

  • Report Receivable data

    Hello
    Do you know if there is in SAP a report that shows me the following info?:
    Customer
    Credit Limit
    Amount insured
    and Terms of payment
    Thank you in advance
    Regards!

    Hello,
    Probably you'll not see all these info on the same report. Some of these data you can see on fd32/fd33 and other you can check on customer master data fd03.
    REgards,
    REnan

  • F.28 Failing to reset Credt Control Area data

    My client has recently moved from a static credit check to a dyanmic credit check in line with a changing business model.
    I have found that after making the required config changes and executing F.28 in the backgroup for the CCA and the cusotmer based FD32 / FD33 still reports that the CCA needs to be reset.
    I have also tested running for a single account, confirmed the event log as green once the program run and still receive a message stating that the credit master needs to be reset when running FD32 / FD33.
    Has anyone else encountered this or aware of a solution?
    Regards

    Dear,
    Whenever we change any important settings related to credit management, SAP recommends to run the
    reorganization programs.
    Kindly run the credit reorganization reports and check again.
    The reports available are
    RVKRED77 - Reorganize SD Credit Data
    Reorganizes open credit, delivery and billing values. It can be used in the event of an update error, for example.
    RVKRED88 -     
    Simulating Reorganization of SD Credit Data
    To run a report:
    SE38 and enter the program name and execute.
    Thanks & Regards,
    Hegal

  • Total Secured Receivables field KNKK-ABSBT

    Hi,
    I need to understand which is the working of field KNKK-ABSBT Total Secured Receivables, into transaction FD32/FD33. Can this field be filled with the insured amount which we fill in the master data field KNB1-VLIBB?
    Many thanks,
    regards
    Roberta

    Hi Umberto,
    In addition to Credit Management, there are several other ways to guarantee payments including letters of credit, export credit insurance, and payment cards. These forms of payment guarantees are all integrated in the Risk Management for Receivables component, providing you with an efficient tool for guaranteeing the payment of all billing values that arise in sales and distribution processes. The payment guarantee procedure is dependent on the customer and a document payment guarantee procedure. These can be determined in Customizing for Sales and Distribution
    The amount of a receivable guaranteed for payment is stored in the line item, which is the one represented as total at field name ABSB,  and can be displayed when displaying documents, the line item itself and in the credit overview (with line layout variants).
    In risk management, the credit value of a sales order is calculated as follows:
    Total value = open confirmed quantities * credit price
    (In the standard system the credit price is calculated by totaling the net value plus taxes.)
    Guaranteed value = total value * guaranteed factor
    Credit value = total value - guaranteed value
    Hope this helps,
    GG

  • Risk Categories

    Hi,
    Can anyone tell me where the risk categories are configured in Credit Management? Transaction code and Menu path.
    Thanks
    Raghu.

    Hi,
    Risk categories are not linked to Credit Control Area. Risk Categories are assigned to Credit Master in Transaction Code FD32 / FD33.
    Further for each risk category in Automatic credit control ?(T.code OVA8), the different checks to be carried out and the message (error / warning) is configured.
    Thanks
    Murali.

  • Problem in call transaction using FD33 t code

    Hi all i'm developing a report in that in that i'm calling a tcode FD33.
    I want to skip the initial screen.For that i need to pass Customer , Credit control area and status from my program to that tcode.
    But my problem is that how to pass the value to check box.
    i.m writing the following code
       "Set parameter ID for transaction screen field
            SET PARAMETER ID 'KUN' FIELD W_ALV-KUNNR.
            SET PARAMETER ID 'KKB' FIELD W_ALV-VKORG.
           "Execute transaction FD33, and skip initial data entry screen
            CALL TRANSACTION 'FD33' AND SKIP FIRST SCREEN.
    So how to set the value of the STATUS check box.
    thanks in advanced.
    Dheeraj

    use:
    data: dynnr(40) value '/210'.    "or number of another dynpro you wish to go
    SET PARAMETER ID 'CDY' FIELD dynnr.
    A.

  • Problem with FD32

    Hi All,
    I am using FD32 transaction recording for updating Customer Credit management. The problem is when running in the foreground its working fine, but when running in background i am getting the error - Account XXX is currently blocked by another user.
    Can any one pls let me know what could be the reason for this error.
    Thanks,
    Raju

    Hi Suhas,
    I have added the below line... which is not mandatory when entering data in second screen--- and the problem is solved.
        PERFORM bdc_field           USING 'KNKK-KNKLI'
                                                   ivbak1_tab-kunnr.
    Thanks,
    Raju

  • Customisation in Tcodes FD32 and FD33

    HI There, i need to add 3 custom fields to screen 0201 for input. These three fields will be added to the customer master table, and also needs to be updated. Is there anyway to achieve this.
    Thanks

    Hi Albert
    I would then suggest you to post this in ABAP forum to get immediate response. I guess someone in that forum can provide you step by step approach.
    Hope this helps

  • Open Sale Order Value (FD33) not getting diminished even after closing SO?

    Hi,
    Upon Executing FD33 and clicking the status view for a Customer say XYZ , and then choosing EXTRAS-Open Sale Order . Say the value of open sale orders being shown is 75000. Even after closing the open sale orders (By Selecting VA05 and Putting reason for Rejection), and then also the Open Sales Order value is not getting diminished.
    What could be the reason ?
    Pls help.
    Regrds,
    Binayak

    Hi Binayak,
    As mentioned by you, running of Credit re-org program 'RVKRED77' is the only solution for this problem and it is known problem in SAP.
    Some precautions
    1. Always run the program in background by scheduling a job.
    2. The idle time is around midnight when no user is working on SAP.
    3. Some time the job fails as some other program may be updating same tables as this program. In such cases re-schedule the job at different time.
    4. You may run the program 'RVKRED88' which will simulate without actual updation of credit values.
    Hope this clarifies..
    Regards,
    Madhu.

  • Doubt in fd32

    Hi Abpers,
             i have doubt in transaction fd32. in  that tr.code once after giving customer and credit control area and selecting status check box of credit control area data .press enter then the field 
    *credit limit used *
    u can see my user requirement is by that transaction he want to check the blocked customers who crossed 100 % credit limit used.
    that i want to list and show to him .
    i want to know the field name and where this corresponding data is stored.

    Hi,
    The Credit limit details can be found in Table KNKK.
    Field KLIMK customer credit limit value and field CRBLB corresponds to whether the customer is blocked in that credit control area.
    Hope your problem is solved.
    Regards,
    Babul.

Maybe you are looking for