Features table

Dear Freinds
could any one let me know what are all the available structures availabe to define when we are creating a custom features. i.e i would like to
know all the availabe structures to add in my feature. Could we know any table availabe for it.
As i could find only the structure (P549B), as i know the following structure for
PME04 for the feature CONTR
PME01 for the feature TMSTA.
so i would like to check all the available structures.
regards
syamla

Hi,
You may try going to SE11 or SE16 to view the underlying structure of a feature or a table.
Hope this helps,
Reward points if helpful,
Thank You,

Similar Messages

Feature Table values Not coming in order in MDM

Hi
We have a problem with one of our extracts.
There is a qualified table called "Feature". And in syndication map we are extracting some models which have associated "Feature" values.(30 values).
In data manager i can see the features associated with a model. And associated "Sequence numbers" of all these Features.
But while syndication extract the Features are not coming in XML according to the sequence number.
The order of features is not same as the Sequence numbers displayed in data manager.
Can anyone help me to find the cause of this . Do i need to make change anywhere else to make the extract according to the Sequence number?
Your quick response is greatly appreciated.
Thanks
Dhanish Joseph

Hi Dhanish,
Syndicator always tries to send the records in the same order as you see in the Records pane of the syndicator.
In data manager,when you were trying to search based on the qualified table, you must have sorted them in sequence (by clicking on the field on the records pane) and the same thing might not be sorted in syndicator.
Please check if this is the case and sort the records in syndicator based on your qualified field and you will get the syndication files in the desired sequence.
Regards,
Sravan

Alternate table of AP_INVOICE_LINES_ALL in 11i

hi 2 all
I have developed Supplier Statement of Account report in oracle apps r12 and use AP_INVOICE_LINES_ALL table.
it running fine in R12 , but when i run in 11i , compiler raised error on AP_INVOICE_LINES_ALL table , b/c this table is not
available in 11i , so plz guide me what is alternate table in 11i ?
Thanks
Zulqarnain

Hi,
There is no equivalent table of ap_invoice_lines_all of R12 in 11i, this is a new feature/ table structure only in R12. The main table in 11i for AP invoice is ap_invoices_all -> ap_invoice_distributions_all, while in R12 it is ap_invoices_all -> ap_invoice_lines_all -> ap_invoice_distributions_all. The information of the ap_invoice_lines_all in R12 should be available in ap_invoice_distributions_all in 11i.
For the prepayment, you should be able to get it by using ap_invoice_distributions_all.prepay_distribution_id
Hope this helps.

Export with Table Splitting : ORA-01115: IO error reading block from file

Hello,
We are in perfroming the last dryrun of our CU&UC conversion.
The are now in the process of exporting the ECC6 system (Oracle 10.2.0.4.0, HPUX ia64) using sapinst features, "table splitting preparation"
When doing so, we are facing critical errors :
Creating file /export_uni/sapinst_splitting/ora_query3_tmp3_1.sql.
ERROR 2010-08-11 10:27:28.881
CJS-00084 SQL statement or script failed. DIAGNOSIS: Error message: ORA-12801: error signaled in parallel query server P002
ORA-01115: IO error reading block from file 90 (block # 16640)
ORA-27072: File I/O error
HPUX-ia64 Error: 22: Invalid argument
Additional information: 4
Additional information: 16640
Additional information: -1
ORA-01115: IO error reading block from file 90 (block # 16640)
ORA-27072: File I/O error
HPUX-ia64 Error: 22: Invalid argument
ORA-06512: at "SAPR3.TABLE_SPLITTER", line 775
ORA-06512: at line 1
I have therefore perfmed a dbverify ; no corruption has been recorded.
When trying to perfrom the EXPORT, without table splitting ; it works fine ...but the processing time is extremely long, as you can imagine. Any help would be highly appreciated.Regards.
Raoul

Thank you Stefan,
Our HPUX Release seems to be indeed 11v3,
[root@:/root]# uname -a
HP-UX B.11.31 U ia64 2566039091 unlimited-user license
I'll check the installation of the patch and keep you informed
Thank you
Raoul
Edited by: Raoul Shiro on Aug 11, 2010 11:57 AM

SDO_TOPO.ADD_TOPO_GEOMETRY_LAYER throws table not found on 11gR2

Hello,
I have a topology I brought over from 10gR2 into 11gR2. I believe I moved everything quite properly as I have moved the same dump file between 10gR2 instances without any issues.
However on 11gR2, I always get an error when I add new topo geometry layer to the topology.
ORA-00942: table or view does not exist
ORA-06512: at "MDSYS.SDO_TOPO", line 997
ORA-06512: at "MDSYS.SDO_TOPO", line 1057
ORA-06512: at line 2
Could anyone on the Oracle team peek and see just what table its looking for? I have the edge$, node$, face$, relation$, history$ and exp$ and all the currently registered feature tables all present and accounted for.
Thanks!
Paul

Hello,
I ran the trace but the statement is a GRANT so its truncated to 25 characters unfortunately.
The following statement encountered a error during parse:
GRANT SELECT on CATCHMEN ...
CLOSE #13:c=0,e=14,dep=1,type=0,t
Error encountered: ORA-00942It appears the package is trying to make sure all the parts of the topology are selectable...?? to who? I am already the owner. Stumps me.
From the surrounding code snippets in the trace I can see this is a pretty complex part of things and so I suspect I'll need to send it to support.
Thanks for the help!
Paul

Suggest a feature page results in undeliverable mail

I've been trying to submit a feature request, but all I get is an email response that my submission could not be delivered. Since bug reporting doesn't seem to include bugs in their website/mail delivery, I figured posting here might get some response.
Delivery has failed to these recipients or distribution lists:
[email protected]
Your message wasn't delivered because of security policies. Microsoft Exchange will not try to redeliver this message for you. Please provide the following diagnostic text to your system administrator.
Sent by Microsoft Exchange Server 2007
Diagnostic information for administrators:
Generating server: corp.adobe.com
[email protected]
#550 5.7.1 RESOLVER.RST.NotAuthorized; not authorized ##rfc822;[email protected]
The Actual feature request was…
*******Enhancement / FMR*********
Brief title for your desired feature: Table Sort
How would you like the feature to work?
Have a sort icon show in table headers and be able to choose multiple columns to sort the table by.
Why is this feature important to you?
Apartment directories often have the same info twice, once sorted by Apartment Number then Last Name then First Name, and a second table is used sorted by Last Name then First Name then Apartment Number.
Having to create two import files with the sort criteria and import each as a table then format each table is inefficient. Better to import single table, format, then make as many duplicates as necessary and change sorting within InDesign.

I'm afraid sending me to the same page that I am reporting as having a problem is no solution. My fault since I didn't specify Adobe - Feature Request/Bug Report Form as where I was getting the results I mentioned, but the title of my post should have made it easy to make that connection
(Suggest a feature page results in undeliverable mail)
Yes, I used the real form on the real web page and got nothing useful for my effort… and that hasn't changed yet.

Common diemsions and more then one fact table join problem

Hi,
I have 5 common dimension and 3 fact table which in the same subject area. When I want to display results from more then one fact table sending database then query more then one and I think BI server join this two different result on OBI server. But I think if obi server sending database query for exp. WITH SAWITH0 .... the results get effective.
+++002002:2ea0000:2ea000f:----2009/03/14 10:12:59
-------------------- SQL Request:
SET VARIABLE QUERY_SRC_CD='Report';SELECT "- Common Dimensions"."Year Month" saw_0, "- Subs. Tariff"."Subscriber Current Tariff Type" saw_1, "- Common Measures".Arpu saw_2, "- Common Measures"."Gross Margin" saw_3, "- Call Out"."Callout Dur" saw_4, "- Case".Case_Info_Num saw_5 FROM "CUSTOMER PROFILING" WHERE ("- Common Dimensions"."Year Month" = 200901) AND ("- Subs. Tariff"."Subscriber Current Tariff Type" = 'PREPAID') ORDER BY saw_0, saw_1
+++002002:2ea0000:2ea000f:----2009/03/14 10:12:59
-------------------- General Query Info:
Repository: Star, Subject Area: CUSTOMER PROFILING REV, Presentation: CUSTOMER PROFILING
+++002002:2ea0000:2ea000f:----2009/03/14 10:13:00
-------------------- Sending query to database named CENTRAVEA (id: <<471777>>):
select T223282.DIM_TIME_MONTH_ID as c1,
T221204.DIM_SUBS_CURRENT_TARIFF_TYPE as c2,
avg(T223490.FACT_CP_ARPU) as c3,
sum(T223490.FACT_CP_GROSS_MARGIN) as c4,
sum(T223490.FACT_CP_CO_DUR) as c5
from
DM.DIM_SUBSCRIBER T221204 /* A_DIM_SUBSCRIBER */ ,
DM.DIM_TIME_MONTH T223282 /* A_DIM_TIME_MONTH */ ,
DM.FACT_CUST_PROFILING_PART3 T223490 /* A_FACT_CUST_PROFILING_PART3 */
where ( T221204.DIM_SUBS_ID = T223490.DIM_SUBS_ID and T221204.DIM_SUBS_CURRENT_TARIFF_TYPE = 'PREPAID' and T223282.DIM_TIME_MONTH_ID = T223490.DIM_TIME_MONTH_ID and T223282.DIM_TIME_MONTH_ID = 200901 and T223490.DIM_TIME_MONTH_ID = 200901 )
group by T221204.DIM_SUBS_CURRENT_TARIFF_TYPE, T223282.DIM_TIME_MONTH_ID
order by c1, c2
+++002002:2ea0000:2ea000f:----2009/03/14 10:13:00
-------------------- Sending query to database named CENTRAVEA (id: <<471881>>):
select T223282.DIM_TIME_MONTH_ID as c1,
T221204.DIM_SUBS_CURRENT_TARIFF_TYPE as c2,
sum(T223294.FACT_CP_CASE_INFO_NO) as c3
from
DM.DIM_SUBSCRIBER T221204 /* A_DIM_SUBSCRIBER */ ,
DM.DIM_TIME_MONTH T223282 /* A_DIM_TIME_MONTH */ ,
DM.FACT_CUST_PROFILING_PART1 T223294 /* A_FACT_CUST_PROFILING_PART1 */
where ( T221204.DIM_SUBS_ID = T223294.DIM_SUBS_ID and T221204.DIM_SUBS_CURRENT_TARIFF_TYPE = 'PREPAID' and T223282.DIM_TIME_MONTH_ID = T223294.DIM_TIME_MONTH_ID and T223282.DIM_TIME_MONTH_ID = 200901 and T223294.DIM_TIME_MONTH_ID = 200901 )
group by T221204.DIM_SUBS_CURRENT_TARIFF_TYPE, T223282.DIM_TIME_MONTH_ID
order by c1, c2
I have another subject area and which defined like this subject area contain two dimension and 5 fact table. If I want to display results on this subject area I can see best sql for my database
My problem is why this two different subject areas create different queries. I think following query is the best for database.
Thanks for your help
+++002002:2ea0000:2ea0015:----2009/03/14 10:30:06
-------------------- SQL Request:
SET VARIABLE QUERY_SRC_CD='Report';SELECT "Dim - Segments"."Marketing Segment" saw_0, "Fact - Campaign Response"."Fact Campaign Award Amount" saw_1, "Fact - Customer Interaction"."Issue Response Cost" saw_2 FROM "AVEA ALL" ORDER BY saw_0
+++002002:2ea0000:2ea0015:----2009/03/14 10:30:06
-------------------- General Query Info:
Repository: Star, Subject Area: AVEA ALL, Presentation: AVEA ALL
+++002002:2ea0000:2ea0015:----2009/03/14 10:30:06
-------------------- Sending query to database named AVEA ALL (id: <<474694>>):
WITH
SAWITH0 AS (select sum(T51461.FACT_CMPGN_AWARD_AMOUNT) as c1,
T49384.DIM_MARKETING_SGMNT_DESC as c2
from
DM.DIM_MARKETING_SEGMENT T49384 /* DIM_BI_MARKETING_SEGMENT */ ,
DM.FACT_CMPGN_RESPONSE T51461 /* FACT_BI_CMPGN_RESPONSE */
where ( T49384.DIM_MARKETING_SGMNT_ID = T51461.DIM_MARKETING_SGMNT_ID )
group by T49384.DIM_MARKETING_SGMNT_DESC),
SAWITH1 AS (select sum(T51503.FACT_CUST_INT_ISSUE_RES_COST) as c1,
T49384.DIM_MARKETING_SGMNT_DESC as c2
from
DM.DIM_MARKETING_SEGMENT T49384 /* DIM_BI_MARKETING_SEGMENT */ ,
DM.FACT_CUST_INTERACTN T51503 /* FACT_BI_CUST_INTERACTN */
where ( T49384.DIM_MARKETING_SGMNT_ID = T51503.DIM_MARKETING_SGMNT_ID )
group by T49384.DIM_MARKETING_SGMNT_DESC)
select distinct case when SAWITH0.c2 is not null then SAWITH0.c2 when SAWITH1.c2 is not null then SAWITH1.c2 end as c1,
SAWITH0.c1 as c2,
SAWITH1.c1 as c3
from
SAWITH0 full outer join SAWITH1 On SAWITH0.c2 = SAWITH1.c2
order by c1

I find solution on Oracle® Business Intelligence Suite Enterprise Edition Release Notes.
If you use a version of Oracle Database 10g Release 2 prior to 10.2.0.3, then you might encounter an issue with a Full Outer Join that causes severe database performance issues and appears to hang the database when the Oracle BI Server sends to the database SQL queries that include WITH clauses.
To work around this issue when using Oracle Database 10g Release 1 or 2, upgrade to Oracle Database 10g Release 2 Patch Set 2 (for 10.2.0.3). For performance reasons, this is the preferred workaround.
To work around this issue without installing Patch Set 2, modify the Database Features table using the Administration Tool. This configuration prevents the Oracle BI Server from sending SQL constructs that expose the issue in an unpatched Oracle Database 10g.
To modify the Database Features table:
In the Administration Tool, open the properties of the Physical Database metadata object.
Navigate to the Features tab.
Ensure the values for the PERF_PREFER_MINIMAL_WITH_USAGE and PERF_PREFER_INTERNAL_STITCH_JOIN entries are selected, that is, set to True.

Does Designer9i support new DB features from 9iR2

Hi,
I am using Designer6i and was wondering if Designer9i supports new Database features of Oracle 9iR2.
So it is possible to define the following new DB features:
- Table Compression
- List Partitioning
- Composit Range List Partitioning
- Bitmap Join Indexes
- External Tables
Thanks for any feedback
Maurice

Maurice,
Designer does not support these features of the 9i database. We have no plans to add this functionality to Designer.
Please refer to the Tools Statement of Direction, the Designer maintenance release document and the related FAQ on OTN (http://otn.oracle.com/products/designer/index.html)
Regards
Sue Harper
Designer Product Management

Not getting data in OBIEE report while pulling columns from different DB

Hi All,
I am creating a report in OBIEE 11g which uses Table A and table B which are joined in both physical layer and BMM layer. But somehow I am not getting any data in the report where as data is actually present for the matching joining columns. However when I made one of the tables (Table A ) as a driving table, I am getting data but only with a filter applied in the report which restricts the data to few records. If the filter is removed, I get an error which is " A Drive Table join exceeded the limit of XXX backend database queries".
Could anyone tell me what can be the issue? Other than using driving table, is there any alternate method to resolve the issue?
Thanks In Advance,
Anju

The error is due to the setting MAX_QUERIES_PER_DRIVE_JOIN in the database features table that controls and tunes driving table performance. Also, try to follow these blogposts to do cross-database joins/federated queries: http://oraclebizint.wordpress.com/2008/03/19/oracle-bi-ee-101332-cross-database-joins/ and http://www.rittmanmead.com/2007/10/reporting-against-multiple-datasources-in-obiee/
Please assign points if helpful/correct.

Pages: Is there a way to make lines independent, like a real word processor

There are so many things that infuriate me about Pages. Save As.. missing, autosave, etc which are NOT like 99% of other apps on the Mac.
Specifially (today):
I have a letter in Pages. It’s a standard business letter you have see 1m times.
After the first line of the address, at the top of the letter, I insert a carriage return and BINGO, the tabs in the middle of the letter are suddenly all messed up.
Grrrrrr.
Is there a way to make lines independent in Pages? I have this crazy belief that letters are not Web Pages, not HTML, and that an extra line somewhere should not reformat following lines way down the page.
Alternately, is there some 3rd party word processor that works like the old Apple Works, with graphics and tables you can recommend?
Thanks

William Donelson wrote:
There are so many things that infuriate me about Pages. Save As.. missing, autosave, etc which are NOT like 99% of other apps on the Mac.
Save As is still there, hold down the option key as you go to the File menu. This is not Pages, it is Mountain Lion.
Specifially (today):
I have a letter in Pages. It’s a standard business letter you have see 1m times.
After the first line of the address, at the top of the letter, I insert a carriage return and BINGO, the tabs in the middle of the letter are suddenly all messed up.
Grrrrrr.
Then you are doing something wrong, probably pounding away at spaces, tabs and returns to position things. Turn on invisibles to see what is going on:
Menu > View > Show Invisibles
If you have strings of tabs, spaces and returns that is the problem.
Is there a way to make lines independent in Pages?
Yes, hit the return key. Like every other Word Processing program.
I have this crazy belief that letters are not Web Pages, not HTML, and that an extra line somewhere should not reformat following lines way down the page.
Alternately, is there some 3rd party word processor that works like the old Apple Works, with graphics and tables you can recommend?
Time to learn Pages. AppleWorks is dead. Stop pining for it. This is a case of user error and instead of blaming Pages, it would pay to find out what you have done and stop doing that.
Pages, except for the fancy DTP features, tables and charts works like most other Word Processing apps. Just a case of learning new tricks. My guess is you have other stuff going on.

Team development in Apex 4.0

Hi,
I want to know how to get values in Assignee, Release and Application select lists in Features in Team Development in Apex 4.0. In the Application select list i m not getting even the applications which are created in my workspace.
Please guide.

So, with the help of Dan...
??? I went to Features and it was a popup. I swear I clicke the icon and nothing. Of course I was out with the team last night and may not be at my most reliable.
Went to Bugs > Create Bug and it Application context is a drop down. My workspace applications were there. Did not create a bug.
Went back to Features and the popup now had the application....
I know how a select list works, so I must be wrong...
However, the filter on the Team Development page must be a select distinct from the features table (WWV_FLOW_FEATURES). The challenge here is that being a lightweight app a user can decide to user milestone or features or both... since milestones don't have app but do have release it seems there is a disconnect in the data flow.
My idea of the data/process flow.
Milestones
-- Features
---- To do / Feedback / Bugs
---- Feature
------ To do / Feedback / Bugs
---- Feature N
------ To do / Feedback / Bugs
And all can be stand alone. But almost all need to relate back to an application and application does not seem to propgate down... too much logic if the hierarchy is not set.
But at least for my lightweight needs at a small client this will be a good tool.

Dropping index gives ORA-29861

Hello
We have an application which reads data from MapInfo Spatialware using MapInfo Professional and upload this data into Oracle Spatial tables using MapInfo Easy Loader utility.
The constraint is that tables in oracle spatial must not be dropped. So we have written a stored procedure which queries unique and spatial indexes of a feature table, then it drops them and truncates the table.
Easy loader then uploads fresh data into these truncated tables and re creates spatial and unique indexes.
This solution is working fine except for 1 feature table "ZONE". The stored procedure is unable to drop the indexes and error log shows error "ORA-29861: domain index is marked LOADING/FAILED/UNUSABLE".
I looked into discussion forums and they say to drop the indexes specifying keyword "FORCE" but how can i query whether index is corrupt and i must force drop it. Index state is all VALID which i check them...
below is the stored procedure....
CREATE OR REPLACE
PROCEDURE Spa_Initializetables
     (     TNAME          IN     VARCHAR2,
     SPATIALCOL          IN     VARCHAR2,
          ERROR_CODE OUT     NUMBER,
          ERROR_MESSAGE     OUT     VARCHAR2
IS
CURSOR c1 IS
SELECT * FROM user_sdo_index_info WHERE table_name LIKE UPPER(TNAME) AND column_name LIKE UPPER(SPATIALCOL);
BEGIN
--Truncate the given table
EXECUTE IMMEDIATE 'TRUNCATE TABLE ' || TNAME;
--Loop through all the indexes found and drop them one by one
FOR cur_ts IN c1 LOOP
--DBMS_OUTPUT.PUT_LINE(cur_ts.index_name);
EXECUTE IMMEDIATE 'DROP INDEX '|| cur_ts.index_name;
END LOOP;
ERROR_CODE := 0;
EXCEPTION
     WHEN OTHERS THEN
     ERROR_CODE          :=     1;
     ERROR_MESSAGE     := SQLERRM;
END Spa_Initializetables;
please let me know what best i can do
Regards
Sam

Sorry, but I can't simulate this troulbe. look:
create table a (id number, lmao mdsys.sdo_geometry)
INSERT INTO mdsys.sdo_geom_metadata_table (SDO_OWNER,SDO_TABLE_NAME,SDO_COLUMN_NAME,SDO_DIMINFO,SDO_SRID)
VALUES ('GIS','A','LMAO',SDO_DIM_ARRAY(
SDO_DIM_ELEMENT('X', -180,180, 5e-4),
SDO_DIM_ELEMENT('Y', -180,180, 5e-4)), NULL);
create index a_g_idx on a(lmao) indextype is mdsys.spatial_index;
insert into a values (1,SDO_geometry(2003,NULL,NULL,SDO_elem_info_array(1,1003,3),SDO_ordinate_array(1,1, 2,2)));
commit;
truncate table a;
insert into a values (2,SDO_geometry(2003,NULL,NULL,SDO_elem_info_array(1,1003,3),SDO_ordinate_array(1,1, 2,2)));
drop table a;
No errors :(
I have 10.2.0.3
May be i didn't understood you ?

A lot of problems with Oracle BI SEE 11g

I have a lot of problems with Oracle BI SEE 11g
1. I upgraded my BI SEE 10 repository and can it openning in offline mode.
2. I can't deploy my upgraded repository in EM MW Control 11g - when i try to open Farm_bifoundation_domain->Business Intelligence->coreapplication, i get error "Stream closed
For more information, please see the server's error log for an entry beggining with: Server Exception during PPR, #41".
Opening Logs by EM control doesn't work too.
in file middleware\user_projects\domains\bifoundation_domain\servers\AdminServer\logs\AdminServer.log i see this event:
<Error> <HTTP> <oratest.itera.ru> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <b639ac3e56e9a463:bd6fa7f:12ac7271e09:-8000-00000000000009e8> <1283408423378> <BEA-101019> <[ServletContext@329875093[app:em module:/em path:/em spec-version:2.5]] Servlet failed with IOException
java.io.IOException: Stream closed
Have you any ideas?
3. Ok, i taking sample repository and adding a new datasource in it:
Database: Oracle 8i
Connection pool:
Call interface OCI 8i/9i
Data source name:
(DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP) (Host = oraapp) (Port = 1521) ) ) (CONNECT_DATA = (SID = MYSID) ) )
This settings are working fine in BI 10.
In BI 11g i get this funny error: "The connection has failed". I lost my time in attempts to connect to Oracle DB 8, but have not results. After that i hacked button "Query DBMS" at "Features" tab, pressed it and when get error "ORA-03134: Connections to this server version are no longer supported.".
Therefore Oracle 8 DB as datasource not supported. Am i right?
4. In sample repository i added oracle DB 10 as datasource, then added two dual tables and their connection to all layers.
Now i open BI Answers, and trying to create report with one dummy column, Now i have this error:
Error
View Display Error
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 42016] Check database specific features table. Must be able to push at least a single table reference to a remote database (HY000)
SQL Issued: SELECT s_0, s_1 FROM ( SELECT 0 s_0, "ORA10G"."dual"."dummy" s_1 FROM "ORA10G" ) djm
Database features are defaults.
Does anyone solve this problem?

Turribeach, Thanks for you time.
1. It was not a question
3. Yes, i have read platforms, but not supported datasources. Now i see, that BI 11g support as datasource Oracle DB 9.2.0.7 or higher. I am sorry.
4. I'm using OCI connection type
Now i recreate Database in Physical schema and answers is showing report data for me! But only from one table, when i use columns from to tables from one datasource, i geting error:
Error View Display Error Odbc driver returned an error (SQLExecDirectW). Error Details Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 46008] Internal error: File server/Utility/Server/DataType/SUKeyCompare.cpp, line 875. (HY000) SQL Issued: SELECT s_0, s_1, s_2 FROM ( SELECT 0 s_0, "Ora10g"."hierarchy_obj_cust_v"."sort_order" s_1, "Ora10g"."NSI_SCHEMA"."SCHEMA_NAME" s_2 FROM "Ora10g" ) djm
Edited by: serzzzh on 03.09.2010 3:44

WinXP, Adobe 9 Pro Extended Uninstall Error 2711 ('ARM')

Using windows XP and trying to uninstall Adobe Acrobate 9 Pro Extended and i am getting the following error:
Error 2711. The specified Feature name ('ARM') not found in Feature table.
And it cancels the uninstall.
Any advice?

Hi ManSinha,
Please check the KB: Update, patch | Acrobat, Reader 7.x - 9.x | Windows
Acrobat 9 patches have to be installed in the following order 9.0.0 > 9.1.0 > 9.1.2 > 9.2.0 > 9.3.0 > 9.3.2 > 9.3.3 > 9.4.0 > 9.4.2 > 9.4.5 > 9.4.6 > 9.5.0 > 9.5.1 > 9.5.2 > 9.5.3 > 9.5.5
Regards,
Rave

Applying 9.1.2 to existing admin install point

I am trying to patch my existing admin install point of Adobe Reader 9.1.1 to 9.1.2 but get this error:
The upgrade patch cannot be installed by the Windows Installer service because the program to be upgraded may be missing, or the upgrade patch may update a different version of the program. Verify that the program to be upgraded exists on yoru computer and that you have the correct upgrade patch.
I get the same error on my PC when I double click the msp file
This is the msi log from when I tried to patch the existing admin install of 9.1.1:
MSI (c) (00:58) [16:18:02:876]: Final Patch Application Order:
MSI (c) (00:58) [16:18:02:876]: Other Patches:
MSI (c) (00:58) [16:18:02:876]: Unknown\Absent: {AC76BA86-7AD7-0000-2550-7A8C40000912} - C:\CustomInstalls\AdobeReader\patches\adobe912.msp
The upgrade patch cannot be installed by the Windows Installer service because the program to be upgraded may be missing, or the upgrade patch may update a different version of the program. Verify that the program to be upgraded exists on your computer an
d that you have the correct upgrade patch.
C:\CustomInstalls\AdobeReader\acroread.msi
MSI (c) (00:58) [16:18:02:876]: Product: Adobe Reader 9.1.1 - Update '{AC76BA86-7AD7-0000-2550-7A8C40000912}' could not be installed. Error code 1642. Additional information is available in the log file c:\adobe.log.
MSI (c) (00:58) [16:18:02:923]: Product: Adobe Reader 9.1.1 -- Installation failed.
Any help is greatly appreciated.

I don't even know why I continue to use adobe products. Adobe software development is a joke. So are their UIs.
First, this forum crashed my FireFox 3.0.10 browser, twice. The second time, I figured out it was Adobe's fault. Why doesn't Adobe learn to script AJAX properly so it doesn't crash browsers? So here I am in IE8 typing a reply.
All of you guys were beating around the bush in regards to the "solution" to this problem. I have found a way to apply the patch and use an MST generated by the Adobe Customization Wizard. Granted, it would be much better if Adobe would just generate their patches correctly to begin with.
As you all have found out, you cannot create an MST using the ACW (Adobe Customization Wizard) and then use the following command
msiexec /i AcroRead.msi /p AdbeRdrUpd912_all_incr.msp /t
This will cause the aforementioned problem. Below is the proper sequence of events:
Make a backup copy of the 9.1.0 AcroRead.msi (just in case).
Run the following command: msiexec /a AcroRead.msi /p AdbeRdrUpd912_all_incr.msp This command will create an Administrative Install Point (AIP) in the directory you choose. I will place it in a directory called Patched The AcroRead.msi file will be rewritten and will be version 9.1.2 (check the Property table with ORCA and look at the value ProductVersion). In addition, the files that were in Data1.cab will be expanded and patched and are in the Patched folder I specified above. At this point, we no longer need the Data1.cab file. If you know how, you could compress all the files back into a cab and insert them back into the media table, but that is overly complicated and I forget how to do it successfully. In any event, the major benefit would be some space savings. If you had a lot of apps like this, it would be beneficial; but for one, not so much so.
Open AcroRead.msi with ACW. Make any changes you want for your installation. However, the following changes must be made or browser integration will be broken (per an earlier post in this thread):
Go to the Registry item in the left-hand menu.
Under the Destination Computer section, navigate to the following key: HKEY_CLASSES_ROOT\acrobat\DefaultIcon.
Modify the (Default) value to the following: [READER]AcroRd32.exe. NOTE: This only applies if you are installing Adobe Reader. If you are installing Acrobat, this may not apply, but I am not sure. YMMV.
This step was updated 10 July 2009 11:30:00 EST (GMT-05:00). If your are performing application virtualization, you will want to make te following changes to the MSI (via ORCA or ACW). I'm making these changes from ACW. The installer will fail during application sequencing during the installation of the Adobe Updater Manager (AUM). For virtualized applications, this component is unnecessary and should not be installed. Other sites lead you through a lengthy, risky process to eliminate the installation of the AUM. This step will eliminate the installation of AUM with two simple changes to the MSI.
In ACW, select the Direct Editor node from the left hand side.
Select the Feature table.
On the right side, locate the features named AUM and Updater. Note that the Level field for both features are 1. Change the Level field for both fields to be 200. Actually, any number greater than 100 will do, but 200 is a nice round number. Since the installer defaults to INSTALLLEVEL=100 (see the Property table), any feature with a Level value of 100 or less will be installed. Since we have now given these features an install level of 200, these features will not be installed. Generally, this tactic can be used on any component you wish not to have installed (for Adobe Reader and some other applcations with simple installers), such as AIR and Acrobat.com. Those are the only two changes that need to be made to not have AUM installed.
To make sure your users don't encounter an error while running Adobe Reader, make sure, in ACW, to uncheck the box Disable all updates under the Online and Acrobat.com Features section.
Save the package (in ACW, File->Save Package). This modifies the setup.ini file so that it will use the changes you just made (saved by default in AcroRead.mst).
I left my original instructions below, but marked as deleted. Please see step 5 below these deleted instructions. This is a new step. If you are performing application virtualization, you want to make the following changes to the MSI (via ORCA or ACW). I'm making these changes via ACW. The installer will fail during application squencing due to not being able to create to two certain registry keys. This is the easiest way that I can think of to get this to work.
Start your sequencing machine (in my case, a VM).
Install Adobe Reader 9.1.x (do not sequence, simply install).
Once installation completes, open the Registry Editor (assuming Windows Vista; if using WinXP or below, try RegEdt32.exe).
Browse to HKEY_CLASSES_ROOT\Installer\Win32Assemblies\Global
Double click the following entry (make sure you get the right one, there are two similar entries!): Microsoft.VC80.CRT,publicKeyToken="1fc8b3b9a1e18e3b",type="win32",version="8.0.50727.762", processorArchitecture="x86".
Copy the value of the entry (on Vista, the value is already highlighted,simply right-click and choose Copy. Otherwise, right-click and choose Select All and then right-click again and choose Copy.).
Paste this value into Notepad. Save the file, making sure to select the Unicode encoding type from the Encoding drop-down list. Save it with the name Microsoft.VC80.CRT.txt
Back in the registry editor, double-click the following entry: policy.8.0.Microsoft.VC80.CRT,publicKeyToken="1fc8b3b9a1e18e3b",type="win32-policy",versio n="8.0.50727.762",processorArchitecture="x86".
Copy the value of the entry (on Vista, the value is already highlighted,simply right-click and choose Copy. Otherwise, right-click and choose Select All and then right-click again and choose Copy.).
Paste this value into Notepad. Save the file, making sure to select the Unicode encoding type from the Encoding drop-down list. Save it with the name policy.8.0.Microsoft.VC80.CRT.txt
Close the registry editor.
Reset your VM so it is clean for the sequencing (i.e. revert to a snapshot).
Back in the ACW, at the Registry portion, navigate to HKEY_CLASSES_ROOT.
Right-click HKEY_CLASSES_ROOT and selet New->Key. Name the new key Installer.
Right-click the Installer key and select New->Key again. Name the key Win32Assemblies.
Create a new key in Win32Assemblies called Global.
Select the Global key you just created.
On the right-side of the editor, right-click and choose New->Multi-String Value. Name the new value: Microsoft.VC80.CRT,publicKeyToken="1fc8b3b9a1e18e3b",type="win32",version="8.0.50727.762", processorArchitecture="x86".
Right-click the new value and select Modify
Open the text file Microsoft.VC80.CRT.txt you created aboe.
Press CTRL+A or Edit->Select All (in Notepad) and then press CTRL+C (or Edit->Copy).
Back in ACW, paste the value from the clipboard and click OK.
Now right-click the editor and choose New->Multi-String Value again. Name it policy.8.0.Microsoft.VC80.CRT,publicKeyToken="1fc8b3b9a1e18e3b",type="win32-policy",versio n="8.0.50727.762",processorArchitecture="x86".
Open the policy.8.0.Microsoft.VC80.CRT.txt file created above.
Copy the file contents as the value of the new entry in the ACW.
Save the package. You should now be ready to install Adobe Reader via Setup.exe for sequencing.
Updated 10 July 2009 12:00:00 EST (GMT-05:00). We have one more step to perform just to clean things up bit. I'm going to create another AIP using the patched MSI and our newly created MST. However, this does not work quite as one would expect.
Run the following command: msiexec /a AcroRead.msi /t <Your_transform.mst>. I created this AIP in a folder called PatchedTransformed.
The above step created another AIP in the PatchedTransformed folder. What's different about this AIP compared to the one made at the beginning of this procedure is that the MSI file was copied to the PatchedTransformed folder as well. However, the MSI is not merged with the changes from the MST as I expected. There are two things you can do:
Modify the setup.ini file and add the following line to the [Product] section: CmdLine=TRANSFORMS="<Your_Transform.mst>", or
Use ORCA. Open your patched MSI in ORCA. Choose Transform->Apply Transform... and select the transform generated by the ACW. Then choose File->Save Transformed As... and give the transformed MSI a new name, e.g. Custom-AdobeReader-9.1.2.msi.
That's it. You now have a fully patched and modified Adobe Reader installer ready for installation or application virtualization.
At this point, you should have an MSI and MST. If you want, you can use ORCA to merge the MST into the MSI. If you're using Setup.exe, you're going to have to change th Setup.ini file.
To test that everything works, you can copy the files to a test directory and perform the following command: msiexec /a <AdobeReader.msi> [/t <Your_transform.mst>] Replace with the name of your MSI file and optionally, pass in your transform (definitely do this if you made a separate MST!). If all goes well, the installation should go well, too. During sequencing, you will still get an MSI installer error (actually, 2), number 1406, about not being able to write to two registry keys. These were the registry keys we added in the steps above. This does not happen on normal installatons.
Please also note that I don't know whether the roaming user profile problem menioned in http://kb2.adobe.com/cps/404/kb404597.html is fixed in version 9.1.2. It was not fixed as of 9.1.0.163. This is all posted AS-IS. YMMV.
UPDATE:
In case you don't know, I will share a bit of enlightenment I had with my procedure above. This specifically relates to application virtualization and sequencing Adobe Reader for MS App-V.
In step 4, I had you install Adobe Reader on a clean machine and obtain some registry information because otherwise, the installation may not be successful for virtualization. These steps are unneccessary. Here's why: you cannot "patch/upgrade" vitualized applications within the application itself. To patch/upgrade a virtual application, you have to use (in the case of MS App-V) the Application Virtualization Sequencing MMC to load the virtualized app, then run the upgrade/patch so that MS App-V can detect the changes and properly update the package. So what does this mean? Two things. First, whenever I use the ACW, under the Online and Acrobat.com Features section I always uncheck <b>Disable all updates</b>. However, checking this does not necessarily mean Adobe Reader does not install the Adobe Update Manager (AUM); in fact, it does install AUM, which is the feature that contains the component that attempts to write those registry entries and therefore, which is causing the error.
Therefore, the solution (and what should be step 4) is to disable the installation of AUM. Now some have posted at various sites how to disable the installation of AUM by deleting a whole bunch of stuff in the MSI. This is not necessary. The steps are outlined in the new step 4 above. This should resolve sequencing issues.
UPDATE 10 July 2009 12:00:00 EST (GMT-05:00) - Pertains to virtualizing Adobe Reader only.
This doesn't work for virtualizing the application. When importing the application into MS App-V Server Management Console, the application version is still 9.1.0.163 even though the splash screen says 9.1.2. I think that my assessment is correct because of two reasons: 1) I still got the MS VC++ Runtime error when using a normal user with a roaming profile which Adobe said the latest 9.1.1 release fixed (and hence 9.1.2) (the AppData folder included) and for which Adobe's solution is a joke; 2) When I installed my "patched" Reader (as a normal install) with AUM and proceeded to go to Help->Check for Updates, the 9.1.2 update appeared in the list of updates (again, even though the splash screen said it was version 9.1.2). Adobe has got to get their patchng correct!!!
For application virtualization, I'm going to recommend that you sequence the 9.1.0 version through to completion. Then, save the sequence and close it. Then re-open the sequence project for upgrade and applythe 9.1.2 patch. Whether you can use an ACW transform on the 9.1.0 installation and then patch, that's debatable. I sure hope so. If not, perhaps there's a way I can fudge it, namely, create an MST via ACW. Then, manually create an MST with the pertinent settings via ORCA and see if that works, instead.
Having said all that, I seriously doubt this works at all even for GPSI deployment. Sorry all. Will post again when I finally get this application to sequence. Hopefully, the same principles will apply to GPSI deployment.
Message was edited by: TTEConline on 10 July 2009 12:00:00 EST (GMT-05:00)

Features table

Similar Messages

Maybe you are looking for