Feedback after the error in SWEL after creating the PO

Hi!
After creating the PO, it says in SWEL.. "Feedback after error" . When I double clicked it, it said that the EVENT releasestepcreated, Import container contains errors (are any obligatory elements missing?)
What could be the possible error in this?
Thanks so much,
Paula

Hi Paula,
Please check your binding from event to workflow.
You might have missed to export the event parameters to WF.
Please check the same in SWDD-> start events.
Thanks and Regards,
Swaminathan

Similar Messages

  • Error: Outlook could not create the work file. Office 2013

    I was having issues with Windows 8.1 store apps not working and it was suggested to sync my account licenses.  I did that but it did not correct my problem.  I then ran the troubleshooter app. The troubleshooter found several issues that it
    fixed but I cannot remember what they were.
    So here's my problem.  Now, when I open Outlook (2013) I get the error "Outlook could not create the work file."  
    Any suggestions?

    Glad to hear that you have found a solution and thank you for sharing it here, it will be helpful to other community members who have same questions.
    Cheers,
    Steve Fan
    TechNet Community Support

  • I can't burn a cd of my own created music. I either get the error 4261, or after "Checking media" the process stops and nothing further happens. Have tried different burn speeds and cds. Have re-installed iTunes.Any suggestions please?

    I can't burn a cd of my own created music. I either get the error 4261, or after "Checking media" the process stops and nothing further happens. Have tried different burn speeds and cds. Have re-installed iTunes.Any suggestions please?
    wm0203

    Sounds like the CD drive died. Luckily they cost next to nothing to replace. Or get an external LaCie instead. I have a dual G4 1.25 and the CD drive was always so anemic I use a LaCie Porsche with it.

  • I tray to reinstall i tunes in my pc after having error 7, but wyle in the instalation this mesage appear said service apple mobile device failed to star. verefy that you have suficient privileges to star system services.

    i tray to reinstall i tunes in my pc after having error 7, but wyle in the instalation this mesage appear said service apple mobile device failed to star. verefy that you have suficient privileges to star system services.

    Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleMobileDeviceSupport.msi to do a standalone AMDS install.
    (If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
    Does it install (or uninstall and then reinstall) properly for you? If so, does an iTunes install go through properly now?
    If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

  • After getting 4G with AT&T I am unable to join my network and get the error message: Unable to  join the network "Jude". How do I fix this? Thank you

    After getting 4G with AT&T I am unable to join my network and get the error message: Unable to  join the network "Jude". How do I fix this? Thank yo

    Try power-cycling your wireless router (unplg for 30 seconds, plug back in).  Here's a longer list of troubleshooting steps: http://support.apple.com/kb/TS1398.

  • After upgrading to 3.6.8 none of the plugins load even though there are updates available. The updates will not install and even though the error states to look at the console error log there are no errors listed in the log.

    After upgrading to 3.6.8 none of the extensions load even though there are updates available. The updates will not install and even though the error states to look at the console error log there are no errors listed in the log. All extensions are listed in Addons>Extensions.
    == This happened ==
    Every time Firefox opened
    == Upgrading to newer Firefox version (3.6.8)

    I have been having the same issue for the last two weeks. No real indication as to why it ever began other than I had turned off my router and Airport Extreme Base Station off for a weekend while I was away from my place.
    iPad, iPhone, iPod Touch, all have no issues at all with my Airport Extreme Base Station. Can stay connected throughout my living room, bathroom, bedroom, no issues whatsoever.
    My 5 month old MacBook Pro 2.66 GHz Core i7 Airport is sometimes perfect, able to connect, DHCP, and browse without issue. Then, for no reason, I won't be able to join my wireless network, or when I can join, I can't pick up an IP address. And then it will connect, pick up and IP, and then it won't browse. No real rhyme or reason to when this will happen, or when it works.
    I thought that it was an issue with my MacBook Pro, but then my sister visited with her brand new MacBook Pro 2.26 Intel Core 2 Duo, and while a month ago she was able to connect, DHCP, and browse without issue, this weekend she had all of the same issues I was having.
    My XBOX 360 and MacBook Pro have absolutely no issues with the wired connection. Only my WAN seems to have this issue.
    Did you ever find anything more to this?

  • HT4972 After upgrading iPhone 4 to iOS 5.1.1 getting the error "iTunes could not restore the iPhone because the backup was corrupt or not compatible with the iPhone that is being restored" HELP!

    I attempted to upgrade my iPhone 4 to iOS 5.1.1. I selected 'back up' from the phone in the device menu and iTunes confirmed that the phone had been backed up. I then installed iOS 5.1.1 which wiped everything on the phone & now I am getting the error "iTunes could not restore the iPhone because the backup was corrupt or not compatible with the iPhone that is being restored".
    I have tried restoring factory settings but iTunes simply will not restore from back up & I'm not sure what else to do!
    Any advice would be much appreciated.

    I have the same issue and I KNOW my backup IS good. What happen is when you try to restore your phone apple says something like can I check for new updates and if you choose no, it just takes you back to the restore screen and a loop from then on.  If you dont update from you phone then when you back up you will have the 5.0.1 back up and then when you update to 5.1.1 and then try to restore the backup from 5.0.1 it say it EITHER corrupt or incompatible.. It is incompatible and its hard as **** to restore back to 5.0.1. I followed the restore to a T and still getting errors. I lost all text history and have to reset up email. All just because I wanted a 1.2 Gigs of "other" space back.

  • RDS 2012 The WinRM service failed to create the following SPNs: Additional Data The error received was 1355

    Hi,
    I have RDS 2012 session deployment in Azure with connection broker high availability.
    The "Remote Desktop Management" service does not start automatically when the connection broker virtual machines are stopped and started.
    I see the below error in event logs of both the connection broker VMs
    Note: WHen i manually start the "Remote Desktop Management" service after this error, it all works without issues.
    I get 
    Error ID 46 - Crash dump initialization failed!
    Warning 10154 - in Microsoft-Windows-Windows Remote Management
    The WinRM service failed to create the following SPNs: 
     Additional Data 
     The error received was 1355

    Hi,
    Thank you for posting in Windows Server Forum.
    In respect to error 46, this issue may occur if the computer boots without a configured dump file. The default dump file is the pagefile. During a clean Windows OS installation, the very first boot will hit this condition as the pagefile has not been set up
    yet. 
    To resolve this issue, you may want complete the paging file configuration.
    More information:
    Event ID 46 logged when you start a computer
    http://support.microsoft.com/kb/2756313/EN-US
    In regards to error 10154, you need to create the SPN specified in the event using the
    setspn.exe utility and also need to grant the “Validated Write to Service Principal Name” permission to the NETWORK SERVICE.
    For more information refer beneath articles.
    Event ID 10154 — Configuration
    http://technet.microsoft.com/en-us/library/dd348559(v=ws.10).aspx
    Domain Controllers Warning Event ID: 10154
    http://srvcore.wordpress.com/2010/01/02/domain-controllers-warning-event-id-10154/
    Hope it helps!
    Thanks,
    Dharmesh

  • Keep getting an error message that reads, "LR An error has occurred while creating the book on Blurb" An error has occurred while trying to create texts and fonts.  Pleas advise as Blurb has said that it's a LR issue.

    Keep getting an error message that reads, "LR An error has occurred while creating the book on Blurb" An error has occurred while trying to create texts and fonts.  Pleas advise as Blurb has said that it's a LR issue.

    Are you behind a firewall or double NAT??
    What is the device that is immediately plugged into the main modem or router? Has that one been able to update?
    It is plugged in of course isn't it.. no nasty join wireless anywhere??
    The best way to work around these sort of problems is to simplify the network.. Plug each device directly into the main router.. by ethernet. You can trigger the firmware upgrade by wireless but use ipad or iphone version of airport utility and see what happens.

  • I continue to recieve the error message "Could not create key: Verify that you have sufficient access to that key" when I am try to down Akamai NetSession Interface that's needed to download the adobe photoshop elements 13 software that I purchased.

    I continue to receive the error message "Could not create key: Verify that you have sufficient access to that key" when I am try to down Akamai NetSession Interface that's needed to download the adobe Photoshop elements 13 software that I purchased.

    cancel the akamai download and download files 1 of 2 and 2 of 2 directly.  put both in the same directory and double click the exe to start installation.
    Downloadable installation files available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5.5, 5
    Contribute:  CS5 | CS4, CS3
    FrameMaker:  12, 11, 10, 9, 8, 7.2
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • I'm getting a Publish Error reading; Can't create the file "header.jpg." The disk may be damaged or full, or you may not have sufficient access privileges.

    I'm getting a publishing error reading; Can't create the file "header.jpg." The disk may be damaged or full, or you may not have sufficient access privileges.
    Does anyone know how to proceed?
    Thanks!

    Try the troubleshooting steps under "FIx iWeb" here...
    http://www.iwebformusicians.com/iWeb/iWeb-Tips.html
    Some times all it takes is deleting the .plist to fix this but do the restart and permissions repair if you haven't done this proceedure for a while.

  • IWocountered an error while attempting to create the attachment data.

    Hi I have created an invoice on pages,then saved it.
    When i click on share to send document  via email as a PDF file this message comes up "IWORK ENCOUNTERED AN ERROR WHILE ATTEMPTING TO CREATE THE ATTACHMENT DATA" can anybody help it very frustrating,i recently wiped my mac book pro and since i put iwork back on it hasnt worked.
    Thanks Tasha

    Pages 5 has a complex and unique file bundle format. Designed to make it impossible to extract any contents when the inevitable goes wrong.
    GMail, Amazon, Dropbox etc (almost any non-Apple Server software) just don't understand them.
    Send the files via Apple Mail.
    Peter

  • Error 25109 : The install program could not create the config data store. Is this a know issue with a solution?

    Hi I cant install the Management Console.
    I keep getting
    Error 25109 : The installation program could not create the configuration data store. Please see the installation log for more info.
    Has someone come across this problem before?
    I am using
    MS Server 2008 Std x86
    SQL Server 2005 SP2 Std x86
    MDOP 2008 R2
    APP-V 4.5
    Please can someone help.
    Thanks

    I'm running into the same problem myself, I have an almost identical setup.
    Trying to do a clean install of App-V Management Server 4.5 from the MDOP 2008 R2 CD.
    Server OS: Windows Server 2008 Enterprise SP1 (Has WDS and IIS installed (IIS 6 Management Compatibility too), as well as .Net 3.5 SP1 Framework)
    Database: Microsoft SQL Server 2005 Enterprise (Version 9.00.3068.00) (Note: SQL server is running on a different server than the server App-V is being installed on.)
    Installer gets to the point where it starts creating the database than dies, reporting a 25109 error.
    Checked out the logfile the installer created, here's a snip of the last few lines before is starts rolling back the install:
    1
    [2008-12-23 15:58:35] (2284:3084) SQL state: ``01000'', Native: 0, Text: ``[Microsoft][ODBC SQL Server Driver][SQL Server]<<< CREATED TRIGGER dbo.TR_U_SYSTEM_OPTIONS >>>''. 
    2
    [2008-12-23 15:58:36] (2284:3084) SQL state: ``42000'', Native: 18058, Text: ``[Microsoft][ODBC SQL Server Driver][SQL Server]Failed to load format string for error 16873, language id 1033.  Operating system error: 122(The data area passed to a system call is too small.). Check that sqlevn70.rll is installed in C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Binn\Resources\1033, where 1033 is the language ID of US English, or the appropriate folder for the locale in use. Also check memory usage.''. 
    3
    [2008-12-23 15:58:36] (2284:3084) SQL state: ``01000'', Native: 3621, Text: ``[Microsoft][ODBC SQL Server Driver][SQL Server]The statement has been terminated.''. 
    4
    [2008-12-23 15:58:36] (2284:3084) ::SQLExecDirectW error 0xffffffff. 
    5
    [2008-12-23 15:58:36] (2284:3084) Failed to execute SQL ``/* ------------------------------------------------------------------------- *\ 
    6
        Copyright (c) Microsoft Corporation.  All rights reserved. 
    7
    8
        Description: 
    9
            This script creates all user-defined messages. 
    10
    11
            The types of messages allowed (and their severities) are: 
    12
            FATAL   - SQL Server Severity = 17; ours = 1 
    13
            ERROR   - SQL Server Severity = 16; ours = 2 
    14
            WARNING - SQL Server Severity = N/A; ours = 3 
    Can anyone help me shed some light on what's going on here?

  • I use migrate assistant to move files from my old pc to the new Mac , but it creates the user account. How can i delete the unwanted user account.

    i use migrate assistant to move files from my old pc to the new Mac , but it creates the user account. How can i delete the unwanted user account.

    Welcome to Apple Support Communities
    That's the classic behaviour after using Migration Assistant and that's normal.
    To transfer the data from the new user account to your old user account, you can follow some steps. Here is all the information you need to do this > https://discussions.apple.com/docs/DOC-5472

  • I want to de-install mac-excel test version and get the error message: you have not the privileges to de-install. Please login with the Mac-OS account you have installed mac-excel originally'. I don't know this account anymore. I am sysadm

    I want to de-install mac-excel test version and get the error message: 'You have not the privileges to de-install. Please login with the Mac-OS account you have installed mac-excel originally'. I don't know this account anymore. Possibly it does not exist anymore. anybody out there who can help ?

    Hi, I may suggest to activate the root account and try the uninstall process from that account. To do so, you have to:
    Go to System Preferences a open up the Users pane;
    On the left side of the pane, you shuold see Login Options;
    Enabled editing option clicking on the lock (it will ask your password);
    Once the pane is enabled, you should see something like Server Account Network (sorry my OS is in italian, so I don't exactly know the right translation), and right next to it a button;
    Click on that button, and a new pane shows up. Click on Open Directory Utility, and on the upper bar of OS X click on Edit;
    Select Enable Root Account (you can set a password, or not);
    Done that, you should log out and when the login window show up, type on the user field "root" and the password you choose;
    Theorically, from this account you will be able to unistall the application.
    After completing your task, I reccomend you to disable the root account, just by loggin in your personal account and repeating the steps I described before. Hope it helps

Maybe you are looking for