Fetch Open PO's based on component part numbers (BOM)

Hi All,
I need to fetch Open PO's based on component part numbers (BOM).
Is there any standard FM or any T-Code or program to achieve this?

Similar Messages

How can I save a page and all its component parts in a single file, like IE does as an MHT - it's much easier for mailing to people where page address not available?? (as in output from an airline booking site, for example)

how can I save a page and all its component parts in a single file, like IE does as an MHT?
It's much easier for mailing to people where page address not available?? (as in output from an airline booking site, for example)
It is simply too painful to have to zip everything up into a single file to send. MHT format has been available for years now from IE, and with every new FF release it's the first thing I look for. I have been using FF for years, and hate having to come out of it, over into IE |(which I even took out of startup) and key everything in again, in order to send somebody something in a convenient format that they can open with a single click.
I can't believe this hasn't been asked before, so have you looked at it and rejected it? Have MS kept the file format secret?
Thanks
MG

This is not really an answer just my comments on your question.
I am sure I recollect efforts being made to get mhtml to work with FF.
Probably the important thing to remember about .mhtml is that if other browsers do support it they may need addons, and may not necessarily render the content correctly/consistently.
There are FF addons designed for archiving webpages, you could try them, but that then assumes the recipient has the same software.
You could simply save the page from FF to your XP pc; then offline open it with and save it using IE, before then emailing using FF, and attaching the .mht or mhtml file that you have now created on your PC.
As an alternative method, in some cases it could be worth considering taking a screen grab of the required page, then sending that to the recipient as a single email attatchment using either a bitmap or jpeg file format for instance.
Something such as an airline booking may be designed with a print option, possibly it could be worthwile looking at sending the print file itself as an email attachment.

JPS-01050: Opening of wallet based credential store failed in 11g Disc Inst

Dear Friends,
we are in the process of installing Discoverer 11g.
we had created schema's using RCU
Installed weblogic with sun JDK (64 bit)
Installed 11.1.1.2.0 fusion middle ware (discoverer component)
Applied 11.1.1.6.0 patchset
Now when we are running configuration assistant we are getting the following error in starting managed server (WLS_DISCO)
The JDK version is correct but still getting the error:
Whts the fix?
bash-3.00$ echo $JAVA_HOME
/11iapps/discoverer/weblogic/11.1.1.6/jdk
bash-3.00$ java -d64 -version
java version "1.6.0_10"
Java(TM) SE Runtime Environment (build 1.6.0_10-b33)
Java HotSpot(TM) 64-Bit Server VM (build 11.0-b15, mixed mode)
bash-3.00$ /11iapps/discoverer/weblogic/11.1.1.6/oracle_com
Caused By: oracle.security.jps.service.credstore.CredStoreException: JPS-01050: Opening of wallet based credential store failed. Reason java.io.IOExcepti
on: PKI-02002: Unable to open the wallet. Check password.
at oracle.security.jps.internal.credstore.ssp.CsfWalletManager.openWallet(CsfWalletManager.java:184)
at oracle.security.jps.internal.credstore.ssp.SspCredentialStore.doInit(SspCredentialStore.java:238)
at oracle.security.jps.internal.credstore.ssp.SspCredentialStore.<init>(SspCredentialStore.java:153)
at oracle.security.jps.internal.credstore.ssp.SspCredentialStore.<init>(SspCredentialStore.java:138)
at oracle.security.jps.internal.credstore.ssp.SspCredentialStoreProvider.getInstance(SspCredentialStoreProvider.java:115)
at oracle.security.jps.internal.credstore.ssp.SspCredentialStoreProvider.getInstance(SspCredentialStoreProvider.java:53)
at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.findServiceInstance(ContextFactoryImpl.java:139)
at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.getContext(ContextFactoryImpl.java:170)
at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.getContext(ContextFactoryImpl.java:191)
at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getContext(JpsContextFactoryImpl.java:132)
at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getContext(JpsContextFactoryImpl.java:127)
at oracle.security.jps.internal.policystore.PolicyUtil$2.run(PolicyUtil.java:2827)
at oracle.security.jps.internal.policystore.PolicyUtil$2.run(PolicyUtil.java:2821)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPDPService(PolicyUtil.java:2821)
at oracle.security.jps.internal.policystore.PolicyUtil.getPDPService(PolicyUtil.java:3097)
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:164)
at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:369)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
at java.lang.Class.newInstance0(Class.java:355)
at java.lang.Class.newInstance(Class.java:308)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1343)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1022)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Regards,
DBA

Hello
Also, you did make sure to use WebLogic 10.3.6 - yes?
The different versions of Discoverer need the different WebLogic releases so that Discoverer 10.1.1.2 needs WebLogic 10.3.2, 10.1.1.3 needs 10.3.3 and so on so that 10.1.1.6 needs 10.3.6.
Granted this may not be the cause of your issue but is something to bear in mind.
Best wishes
Michael

Is it possible to deconstruct an existing video to get its component parts?

I made a video http://gallery.mac.com/lorna6#100193 years ago from footage taken in about 2000 and 2001. In a prior thread I mentioned having somehow losing the AUDIO component. Well, disturbingly, I went and watched the video from my old iMovie '06 and discovered that it was the video clips that were missing, not the audio. In the picture below, those black frames represent no video to be seen. I think that the exclamation mark in the yellow circle means the same thing or that something went awry.
Here is a picture of the clips in the work space part -- the upper left quadrant, of my iMovie '06 project.
To clarify: I forgot how I made that video because it was so long ago. I know from reading about iMovie '09 that I will probably do more videos on it because it sounds less complex but equally good for the most part.
Someone in this forum, John, encouraged me to go over the highlights of that old video using the iMovie '09 program and I liked that idea........ so you can imagine my dismay when I returned to the program, opened it up, and now see that I lack not the audio, but the most precious video.
Sadly, the original footage is lost due to external hard drive crashes. I might have kept a memory chip that had it but after all these years and me being disorganized, I do not know where it is.
Is there a way that I can use the iMovie 06 video that you see at my Mobile Me Gallery to extract the clips and the audio? Or if not the audio, then at least all of the video clips? *Is it possible to deconstruct an existing video to get its component parts?*
~L

I have had a series of iMovie applications but I used them all too infrequently, partly out of Fear of Trying. Now with the iMovie '09 out, I think I can do it. Yes, I know that I made the Cheyenne video with a previous app, but I found it confusing at times, and look now and see how I bollixed it up, losing some clips in ways I do not know.
You (John C.) wrote:
That's a miniDV camera, which uses tape. It's very similar to my earlier camera, as listed in my details below - the Sony DCR-TRV20. I now mainly use a high definition AVCHD Sony HDR-SR7 - that's why I've switched from iMovie HD 6 to iMovie '09.
.......... Lorna says ...........................
John, I call that a Pandoa's Box paragraph up there! First of all, I am left thinking that the type of videocam that I use will determine which kind of iMovie application I use. Yes? Can I assume that since you with your Sony DC-TRV20 have high definition AVCHD, then my DC-TRV11 might also have it.
I have my user manual in front of me and looked in the Index for both HD and AVC (what is the C in AVC?), and neither is listed. I cannot find anywhere in the manual that tells whether my mini digital TRV11 also has high def AVDHC.
How important is that in using the new iMovie '09? If my Sony does not have it, then does that simply mean that I cannot make use of the HD capability of iMovie '09?
All of this would have been a moot question because earlier I had decided to just use the video component in my Canon digital camera, but then getting my Sony mini digital out and seeing and touching it, and remembering it worked, I began thinking that maybe I should use the camera video for when I am away from home and the Sony for when I am here at home.
There is one thing I would say about HD: It is a memory gobbler, and if you make videos for YouTube, you might feel the constraints within that platform. It might be better for showing things to family and friends on your home tv with no megabyte or time restrictions.
You/John C. continued writing:
Your thoughts on archiving and backup sound sensible Lorna. I must admit, I don't backup as often as I should. I've been using the old Apple Backup program, but am considering moving to Time Machine, with an appropriate hard drive to match - maybe Time Capsule like you are using.
.......... Lorna says ...........................
John,if you decide to get Time Capsule to work wirelessly and continuously with Time Machine, then I suggest you consider a 2 terabyte capacity. I began using the Apple Back up but found it confusing and ultimately insufficient.
You/John C continued writing:
Currently (as listed below), I have 4 external hard drives - 3 are FireWire 400 and the largest one is FW 800. None of these has ever given me a problem (touch wood) - they are LaCie 120GB (not your favourite!), and 3 Maxtor's - 250GB, 300GB and 1TB. The 1TB drive is RAID enabled, having two 500GB drives in the enclosure, which I'm effectively using as one drive, that is, one is not a mirror of the other - so if one fails I've lost all the data! A good reason for using Time Machine.
.......... Lorna says ...........................
John I still am not clear on what RAID is and I guess I will Google it to find out. What is the purpose of having two separate drives housed in a shell? Is it about saving space? Or is it about ports? Or what?
Of course, if you get the one that was mentioned by someone earlier, than it would warn you when something is about to go wrong and you could act pre-emptively. But that was suggested for a business or a pro, neither of which I am.
You/John C wrote:
As my HD camera is a hard drive model (60GB), I archive the footage to the Maxtor 1TB drive, using iMovie's "Archive All" feature. From there, it's easy to import clips into an Event, which is also stored on the Maxtor - so double jeopardy! I had better get cracking on updating my backup strategy
.......... Lorna says ...........................
I am lost. What do you mean, your HC camera is a hard drive model? And what you wrote sounds like something important that I should understand more precisely. I am thinking that the salesguy at Best Buy was right: I should get yet another hard drive in which to store specifically and only my homemade video stuff, my iTunes, and my photographs. I don't know how I would do that, though, if I want them to be stored ALSO IN MY 2TERABYTE SEAGATE as a double archive.
-L
John

JPS-06514: Opening of file based keystore failed.

I have a fresh install of JDeveloper 11.1.2.3.0 (Build JDEVADF_11.1.2.3.0_GENERIC_120914.0223.6276.1). When I try to start the integrated WebLogic Server from the Application Servers explorer tab, it fails and crashes with "JPS-06514: Opening of file based keystore failed." The entire output console content is pasted below for your reference. I am under time pressure, so the sooner somebody can help, the better. Thanks in advance!
*** Using HTTP port 7101 ***
*** Using SSL port 7102 ***
C:\Users\userP\AppData\Roaming\JDeveloper\system11.1.2.3.39.62.76.1\DefaultDomain\bin\startWebLogic.cmd
[waiting for the server to complete its initialization...]
JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m
WLS Start Mode=Development
CLASSPATH=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jdbc_11.1.1\ojdbc6dms.jar;C:\Oracle\MIDDLE~1\patch_wls1211\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\patch_oepe101\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\patch_ocp371\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\JDK160~3\lib\tools.jar;C:\Oracle\MIDDLE~1\WLSERV~1.1\server\lib\weblogic_sp.jar;C:\Oracle\MIDDLE~1\WLSERV~1.1\server\lib\weblogic.jar;C:\Oracle\MIDDLE~1\modules\features\weblogic.server.modules_12.1.1.0.jar;C:\Oracle\MIDDLE~1\WLSERV~1.1\server\lib\webservices.jar;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1/lib/ant-all.jar;C:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.jar;C:\Oracle\MIDDLE~1\WLSERV~1.1\common\derby\lib\derbyclient.jar;C:\Oracle\MIDDLE~1\WLSERV~1.1\server\lib\xqrl.jar;.;c:\oracle\middleware\wlserver_10.3\server\lib;M:\dommgr\DomainManager\classes;M:\3rdparty\wls_10.3\weblogic.jar;M:\3rdparty\wls_10.3\wlfullclient.jar;M:\3rdparty\wls_10.3\wljmxclient.jar;M:\3rdparty\wls_10.3\wlclient.jar;
PATH=C:\Oracle\MIDDLE~1\patch_wls1211\profiles\default\native;C:\Oracle\MIDDLE~1\patch_oepe101\profiles\default\native;C:\Oracle\MIDDLE~1\patch_ocp371\profiles\default\native;C:\Oracle\MIDDLE~1\WLSERV~1.1\server\native\win\32;C:\Oracle\MIDDLE~1\WLSERV~1.1\server\bin;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1\bin;C:\Oracle\MIDDLE~1\JDK160~3\jre\bin;C:\Oracle\MIDDLE~1\JDK160~3\bin;C:\windows\system32;C:\windows;C:\windows\System32\Wbem;C:\windows\System32\WindowsPowerShell\v1.0\;C:\Program Files\IBM\RationalSDLC\ClearCase\bin;C:\Program Files\IBM\RationalSDLC\common;M:\etc;C:\Oracle\MIDDLE~1\WLSERV~1.1\server\native\win\32\oci920_8
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
java version "1.6.0_29"
Java(TM) SE Runtime Environment (build 1.6.0_29-b11)
Java HotSpot(TM) Client VM (build 20.4-b02, mixed mode)
Starting WLS with line:
C:\Oracle\MIDDLE~1\JDK160~3\bin\java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=DefaultServer -Djava.security.policy=C:\Oracle\MIDDLE~1\WLSERV~1.1\server\lib\weblogic.policy -Djavax.net.ssl.trustStore=C:\Users\FCOCA~1.COR\AppData\Local\Temp\trustStore7654511046496503013.jks -Ddmsc_config_file=M:\etc\dommgr.properties -Doracle.jdeveloper.adrs=true -Dweblogic.nodemanager.ServiceEnabled=true -Xverify:none -Djava.endorsed.dirs=C:\Oracle\MIDDLE~1\JDK160~3/jre/lib/endorsed;C:\Oracle\MIDDLE~1\WLSERV~1.1/endorsed -da -Dplatform.home=C:\Oracle\MIDDLE~1\WLSERV~1.1 -Dwls.home=C:\Oracle\MIDDLE~1\WLSERV~1.1\server -Dweblogic.home=C:\Oracle\MIDDLE~1\WLSERV~1.1\server -Djps.app.credential.overwrite.allowed=true -Dcommon.components.home=C:\Oracle\MIDDLE~1\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=C:\Users\FCOCA~1.COR\AppData\Roaming\JDEVEL~1\SYSTEM~1.1\DEFAUL~1 -Djrockit.optfile=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.server.config.dir=C:\Users\FCOCA~1.COR\AppData\Roaming\JDEVEL~1\SYSTEM~1.1\DEFAUL~1\config\FMWCON~1\servers\DefaultServer -Doracle.domain.config.dir=C:\Users\FCOCA~1.COR\AppData\Roaming\JDEVEL~1\SYSTEM~1.1\DEFAUL~1\config\FMWCON~1 -Digf.arisidbeans.carmlloc=C:\Users\FCOCA~1.COR\AppData\Roaming\JDEVEL~1\SYSTEM~1.1\DEFAUL~1\config\FMWCON~1\carml -Digf.arisidstack.home=C:\Users\FCOCA~1.COR\AppData\Roaming\JDEVEL~1\SYSTEM~1.1\DEFAUL~1\config\FMWCON~1\arisidprovider -Doracle.security.jps.config=C:\Users\FCOCA~1.COR\AppData\Roaming\JDEVEL~1\SYSTEM~1.1\DEFAUL~1\config\fmwconfig\jps-config.xml -Doracle.deployed.app.dir=C:\Users\FCOCA~1.COR\AppData\Roaming\JDEVEL~1\SYSTEM~1.1\DEFAUL~1\servers\DefaultServer\tmp\_WL_user -Doracle.deployed.app.ext=\- -Dweblogic.alternateTypesDirectory=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.ossoiap_11.1.1,C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Dweblogic.jdbc.remoteEnabled=false -Dwsm.repository.path=C:\Users\FCOCA~1.COR\AppData\Roaming\JDEVEL~1\SYSTEM~1.1\DEFAUL~1\oracle\store\gmds -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=C:\Oracle\MIDDLE~1\patch_wls1211\profiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1\patch_oepe101\profiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1\patch_ocp371\profiles\default\sysext_manifest_classpath weblogic.Server
<19-Dec-2012 2:37:23 o'clock PM EST> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<19-Dec-2012 2:37:23 o'clock PM EST> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<19-Dec-2012 2:37:24 o'clock PM EST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 20.4-b02 from Sun Microsystems Inc..>
<19-Dec-2012 2:37:24 o'clock PM EST> <Info> <Management> <BEA-141107> <Version: WebLogic Server Temporary Patch for 13340309 Thu Feb 16 18:30:21 IST 2012
WebLogic Server Temporary Patch for 13019800 Mon Jan 16 16:53:54 IST 2012
WebLogic Server Temporary Patch for BUG13391585 Thu Feb 02 10:18:36 IST 2012
WebLogic Server Temporary Patch for 13516712 Mon Jan 30 15:09:33 IST 2012
WebLogic Server Temporary Patch for BUG13641115 Tue Jan 31 11:19:13 IST 2012
WebLogic Server Temporary Patch for BUG13603813 Wed Feb 15 19:34:13 IST 2012
WebLogic Server Temporary Patch for 13424251 Mon Jan 30 14:32:34 IST 2012
WebLogic Server Temporary Patch for 13361720 Mon Jan 30 15:24:05 IST 2012
WebLogic Server Temporary Patch for BUG13421471 Wed Feb 01 11:24:18 IST 2012
WebLogic Server Temporary Patch for BUG13657792 Thu Feb 23 12:57:33 IST 2012
WebLogic Server 12.1.1.0 Wed Dec 7 08:40:57 PST 2011 1445491
WebLogic Server 10.3.2.0 Tue Oct 20 12:16:15 PDT 2009 1267925
WebLogic Server 10.3 Tue Nov 15 08:52:36 PST 2011 1441050
WebLogic Server 10.3 Tue Nov 15 08:52:36 PST 2011 1441050 >
<19-Dec-2012 2:37:25 o'clock PM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING.>
<19-Dec-2012 2:37:25 o'clock PM EST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool.>
<19-Dec-2012 2:37:25 o'clock PM EST> <Notice> <LoggingService> <BEA-320400> <The log file C:\Users\userP\AppData\Roaming\JDeveloper\system11.1.2.3.39.62.76.1\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms, such as Windows.>
<19-Dec-2012 2:37:25 o'clock PM EST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Users\userP\AppData\Roaming\JDeveloper\system11.1.2.3.39.62.76.1\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log00003. Log messages will continue to be logged in C:\Users\userP\AppData\Roaming\JDeveloper\system11.1.2.3.39.62.76.1\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log.>
<19-Dec-2012 2:37:25 o'clock PM EST> <Notice> <Log Management> <BEA-170019> <The server log file C:\Users\userP\AppData\Roaming\JDeveloper\system11.1.2.3.39.62.76.1\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log is opened. All server side log events will be written to this file.>
19-Dec-2012 2:37:26 PM oracle.security.jps.internal.keystore.file.FileKeyStoreManager openKeyStore
WARNING: Opening of file based keystore failed.
<19-Dec-2012 2:37:26 o'clock PM EST> <Error> <Security> <BEA-090892> <The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: JPS-06514: Opening of file based keystore failed.>
<19-Dec-2012 2:37:26 o'clock PM EST> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: JPS-06514: Opening of file based keystore failed.
weblogic.security.SecurityInitializationException: The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: JPS-06514: Opening of file based keystore failed.
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1402)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1022)
     at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
     at weblogic.security.SecurityService.start(SecurityService.java:148)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     Truncated. see log file for complete stacktrace
Caused By: oracle.security.jps.JpsRuntimeException: JPS-06514: Opening of file based keystore failed.
     at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:167)
     at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:369)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
     Truncated. see log file for complete stacktrace
Caused By: oracle.security.jps.JpsException: JPS-06514: Opening of file based keystore failed.
     at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPDPService(PolicyUtil.java:2855)
     at oracle.security.jps.internal.policystore.PolicyUtil.getPDPService(PolicyUtil.java:3097)
     at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:164)
     at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:369)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     Truncated. see log file for complete stacktrace
Caused By: oracle.security.jps.service.keystore.KeyStoreServiceException: JPS-06514: Opening of file based keystore failed.
     at oracle.security.jps.internal.keystore.file.FileKeyStoreManager.openKeyStore(FileKeyStoreManager.java:374)
     at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.doInit(FileKeyStoreServiceImpl.java:104)
     at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.<init>(FileKeyStoreServiceImpl.java:76)
     at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.<init>(FileKeyStoreServiceImpl.java:66)
     at oracle.security.jps.internal.keystore.KeyStoreProvider.getInstance(KeyStoreProvider.java:157)
     Truncated. see log file for complete stacktrace
>
<19-Dec-2012 2:37:26 o'clock PM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED.>
<19-Dec-2012 2:37:26 o'clock PM EST> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down.>
<19-Dec-2012 2:37:26 o'clock PM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN.>
<19-Dec-2012 2:37:26 o'clock PM EST> <Warning> <Security> <BEA-090922> <Certicom SSL is available, however JSSE is being used for SSL, since JSSE has been selected by attribute SSLMBean.JSSEEnabled, either explicitly or by default.>
Process exited.

I believe you can chmod back to your app user and correct the issue.
-ryan

I am experiencing difficulties opening some web-based PDF files on my iPad. I was having the same difficulty opening the same PDFs on my iMac (after I upgrade to Yosemite) but was able to overcome it by adjusting the Adobe Reader plug-in settings.

I am experiencing difficulty opening some web-based PDF documents on my iPad. I had exactly the same difficulty on my iMac (after I upgraded to Yosemite) but was able to overcome it by adjusting the Adobe Reader plug-in security settings in Safari (in OSX).
Unfortunately there does not seem to be a way to similarity adjust the security settings in Safari in iOS 8.
The message I get when I attempt to open the PDF (on my iPad) is as follows:
            "To view the full contents of this document you need a later version of PDF viewer. You can upgrade to the latest version of Adobe Reader from ..."
Needless to say this is unhelpful for two reasons:
- I have the very latest version of Adobe Reader; and
- in iOS Adobe Reader is not a plug-in and plays absolutely no role in opening web-based PDF documents.
If anyone has experienced this difficulty and has been able to overcome it I would be most appreciative to hear of you solution.
Cheers
AlbertaRic

Did you check what I would consider the first place to look:
* http://kb.mozillazine.org/Problematic_extensions
If the site is still down (at least 12 hours) when you read this try [http://webcache.googleusercontent.com/search?q=cache:http%3A//kb.mozillazine.org/Problematic_extensions Google's cache]
Link or url would make it easier to see which page you tried rather than "your online solution for ...".
* http://kb.mozillazine.org/Firefox_hangs ([http://webcache.googleusercontent.com/search?q=cache:http%3A//kb.mozillazine.org/Firefox_hangs cached version])
* http://kb.mozillazine.org/Firefox_crashes ([http://webcache.googleusercontent.com/search?q=cache:http%3A//kb.mozillazine.org/Firefox_crashes cached version])
* [https://support.mozilla.com/kb/Firefox%20hangs#os=mac&browser=fx4 Firefox hangs | Troubleshooting | Firefox Help]

Process Order Quanity based on Component Quanitity

Hy,
In most cases the component qty. are depends on prodcution/process order quanity, but we have a scenario in which Order quanity is only decided on the basis of Active component's avalable qty of a single bacth which is based on its potency.
For example
1.0) If available stock of a single batch of a active ingredient is 5.5 Kg (Assay is 97.5%) then we can take process order quantity of 5000 Nos.
2.0) If available quanity of a second batch of a actuve ingredient is 3.1 kg and (Assay is 98%) then we can tak process order quanity of 2800 Nos.
Due this we can not set our lot size.For every single bacth of active ingredient we have to do manual calculation of a process order quantity.
So pls guide how we can map this scenario for both planing and process purpose.
Regards,
Dhaval

Hi Dhaval,
I can suggest you to search any planning strategy available where you can create the planned order based on component.
If it is not there then create one custom transaction where you can get the component availability along with batch ids. and use the same quantity for creation of Header material production order.
We have developed custom transaction for PO creation where we adjusting or assigning the batch on availability.
Regards,
Shailendra

In Safari, opening a web-based pdf results in a black page?

Whn I am using Safari which is the default browser on my IMAC, opening a web-based pdf results in a black page? This does not happen when using firefox. Also does not happen when opening an emailed pdf.

Back up all data.
Quit Safari. In the Finder, select Go ▹ Go to Folder... from the menu bar, or press the key combination shift-command-G. Copy the line of text below into the box that opens, and press return:
/Library/Internet Plug-ins
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then launch Safari and test.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

My iphone 4 cannot open the flash based web sites. Is there no tie up with Flash???

my iphone 4 cannot open the flash based web sites. Is there no tie up with Flash???

Actually, read this. http://www.apple.com/hotnews/thoughts-on-flash/

Fetch records from Database based on Input value

Hi Experts,
In my mobile application, I have designed one input field with F4 help or input assist. I need to fetch records from database based on that input and need to display records in table.
My question is:
How to fetch the records from database/back end based on the input value and display them as table format as we are doing in SAP ABAP?
Here, I need to fetch the records based on input value available in the UI screen and pass that value to gateway, fetch the records from database and need to bind with table in SAPUI5.
Kindly share the whole process flow with sample code for this requirement. Hope I have explained the requirement in detail.
Thanks In Advance..
Regards,
Arindam Samanta.

Hi,
Try something like this.
In this, I am passing From date, To date, RelGrp, RelStr, Uname as input. Then I am storing those values in variables and passing this data in Odata request.
OData.read({ requestUri: "http://xxxx:8000/sap/opu/odata/sap/Z188_PO_SRV/pos?$filter=Docdate le datetime'"
                + todateformat+"T00:00:00' and Docdate ge datetime'"
                + fromdateformat+"T00:00:00' and RelGrp eq '"
                + relcode +"'and RelStr eq '"
                + relstg +"'and Uname eq '"
                + username+ "' "},
function (data) {
console.log(data);
When we are giving correct inputs it will goes to Success function and get the data from back end.
In console we can see the data.
Hope this will helps to you.
Thanks&Regards
Sridevi

Need help in finding open source for creating Login component

hi
Pls any one help me out in finding some good open source for creating login component for my application
i have heard about josso but i am not able to find how to use it if anyone can help in setting up josso i wil be very thankful to that person and also if anyone can help me finding some other open source i will be very grateful ,,
Pls help its very urgent and i am running short of time

DECODE(l.attribute_category, 'Coverage Template Header', l.attribute3) Penalty_Bonus,
DECODE(l.attribute_category, 'Coverage Break', l.attribute1) Mon_Break_Start,
DECODE(l.attribute_category, 'Transaction Type', l.attribute1) Split_Covering,Uh oh, the dreaded entity attibute value, or generic, data model.
http://asktom.oracle.com/pls/ask/f?p=4950:8:::::F4950_P8_DISPLAYID:10678084117056
I am afraid slow performance is a built in feature of this database design, not much you can do in queries.
You could possibly create the views as materialized views and query those instead.
Quote from the linked article
But, how does it perform? Miserably, terribly, horribly. A simple "select
first_name, last_name from person" query is transformed into a 3-table join with
aggregates and all. Further, if the attributes are "NULLABLE" - that is, there
might not be a row in OBJECT_ATTRIBUTES for some attributes, you may have to
outer join instead of just joining which in some cases can remove more optimal
query plans from consideration.
Writing queries might look pretty straightforward, but it's impossible to do in
a performant fashion.

Opening of wallet based credential store failed. Reason java.io.IOEx ???

Hi Everyone,
i have created ADF application.
My Jdev version is 11.1.1.5.0.
After some successful runs suddenly when i tried to run my ADF page once again, it didnt start weblogic server itself and gave the below error:
eb 12, 2013 9:59:18 AM GMT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
<Feb 12, 2013 9:59:18 AM GMT> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>
<Feb 12, 2013 9:59:18 AM GMT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
Process exited.
And when i closed and opened my Jdev then i saw the below message in the Messages-Log:
"Feb 12, 2013 3:24:10 PM oracle.jps.credstore
WARNING: Opening of wallet based credential store failed. Reason java.io.IOException: PKI-02002: Unable to open the wallet. Check password. "
This type of error i got many times everytime i uninstalled Jdev and reinsatlled it.
Do we have any solution for this kind of error?
what could be the problem with Jdev?
Any suggestions will be really usefull.
Thanks.

PKI-02002: Unable to open the wallet. Check password.

Opening of wallet based credential store failed. Reason java.io.IOException

Hi all,
I installed soa 11.1.1.3 when i am trying to run admin server i am getting the below exception plz help me if you have any idea .
weblogic.security.SecurityInitializationException: The dynamic loading of the OPSS java security policy provider class oracle.security.jps.internal.policystore.JavaPolicyProvider failed due to problem inside OPSS java security policy provider. Exception was thrown when loading or setting the JPSS policy provider. Enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: JPS-01538: The default policy provider was not found.     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1394)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
     at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)
     at weblogic.security.SecurityService.start(SecurityService.java:141)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused By: oracle.security.jps.JpsRuntimeException: JPS-01538: The default policy provider was not found.
     at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:273)
     at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:265)
     at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:136)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
     at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
     at java.lang.Class.newInstance0(Class.java:355)
     at java.lang.Class.newInstance(Class.java:308)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1312)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
     at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)
     at weblogic.security.SecurityService.start(SecurityService.java:141)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused By: oracle.security.jps.JpsException: JPS-01538: The default policy provider was not found.
     at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:705)
     at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:271)
     at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:265)
     at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:136)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
     at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
     at java.lang.Class.newInstance0(Class.java:355)
     at java.lang.Class.newInstance(Class.java:308)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1312)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
     at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)
     at weblogic.security.SecurityService.start(SecurityService.java:141)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused By: oracle.security.jps.JpsException: JPS-01514: The default context is missing in jps-config.xml.
     at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:665)
     at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:650)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:650)
     at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:271)
     at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:265)
     at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:136)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
     at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
     at java.lang.Class.newInstance0(Class.java:355)
     at java.lang.Class.newInstance(Class.java:308)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1312)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
     at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)
     at weblogic.security.SecurityService.start(SecurityService.java:141)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused By: oracle.security.jps.service.credstore.CredStoreException: JPS-01050: Opening of wallet based credential store failed. Reason java.io.IOException: PKI-02002: Unable to open the wallet. Check password.
     at oracle.security.jps.internal.credstore.ssp.CsfWalletManager.openWallet(CsfWalletManager.java:177)
     at oracle.security.jps.internal.credstore.ssp.SspCredentialStore.doInit(SspCredentialStore.java:218)
     at oracle.security.jps.internal.credstore.ssp.SspCredentialStore.<init>(SspCredentialStore.java:140)
     at oracle.security.jps.internal.credstore.ssp.SspCredentialStore.<init>(SspCredentialStore.java:127)
     at oracle.security.jps.internal.credstore.ssp.SspCredentialStoreProvider.getInstance(SspCredentialStoreProvider.java:115)
     at oracle.security.jps.internal.credstore.ssp.SspCredentialStoreProvider.getInstance(SspCredentialStoreProvider.java:53)
     at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.findServiceInstance(ContextFactoryImpl.java:139)
     at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.getContext(ContextFactoryImpl.java:170)
     at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.getContext(ContextFactoryImpl.java:191)
     at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getContext(JpsContextFactoryImpl.java:133)
     at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getContext(JpsContextFactoryImpl.java:128)
     at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:656)
     at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:650)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:650)
     at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:271)
     at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:265)
     at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:136)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
     at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
     at java.lang.Class.newInstance0(Class.java:355)
     at java.lang.Class.newInstance(Class.java:308)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1312)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
     at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)
     at weblogic.security.SecurityService.start(SecurityService.java:141)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
>

Credit goes to http://brajeshwar.com/2005/file-access-denied-on-windows-xp-and-how-to-take-ownership/
For my windows XP solution. Basically the cwallet.sso file was not controllable via the XP user I was logged in as. Added the XP user to have full access to the file
Here are the steps in quickie mode
1.Log on to the computer with an account that has administrative credentials. If you are running Microsoft Windows XP Home Edition, you must start the computer in safe mode, and then log on with an account that has Administrative rights to have access to the Security tab.
2.If you are using Windows XP Professional, you must disable Simple File Sharing.
3.Right-click the folder/file that you want to take ownership of, and then click Properties.
4.Click the Security tab, and then click OK on the Security message (if one appears).
5.Click Advanced, and then click the Owner tab.
6.In the Name list, click your user name, or click Administrator if you are logged in as Administrator, or click the Administrators group. If you want to take ownership of the contents of that folder, select the Replace owner on subcontainers and objects check box.
7.Click OK, and then click Yes when you receive the following message:
You do not have permission to read the contents of directory folderName. Do you want to replace the directory permissions with permissions granting you Full Control?
All permissions will be replaced if you press Yes.
8.Click OK, and then reapply the permissions and security settings that you want for the folder and its contents.

I updated the software on my phone but i had to delete my music to open up enough space, now only part of my music will load on my phone, what do i do?

i updated the software on my phone but i had to delete my music to open up enough space, now only part of my music will load on my phone, what do i do?

***, a text I tried to send but saved,chops up and pastes in the forum question in my attempt to reach out for a technical resolve of my phone, not my heart. Hahaha.

Cannot open any google based application

Within the last few days or so, we are unable to open any google based application, ie., images, YouTube, maps. We get an error message that says "404 Not Found" nginx. It is getting very frustrating.

I tried flushing the cache, but to be quite honest I don't know if I did it correctly. This is what terminal looked like when I entered the command:
users-macbook:~ User$ dscacheutil -flushcache
users-macbook:~ User$
It didn't give any sort of confirmation that it had flushed the dns cache. I don't know very much about unix, though, so maybe that is what is supposed to happen? Anyway, I also created a test user account, and that account had the same problem with Google sites.

Fetch Open PO's based on component part numbers (BOM)

Similar Messages

Maybe you are looking for