Fetching the serial number of the user's machine

Hi there.
I am after a Cocoa approach to retrieving the serial number of the user's machine in my application.
I have seen an AppleScript solution, but I was wondering if there was a more efficient Cocoa way.
Thanks in advance,
Ricky.

You should not post your serial number in these forums, besides what you posted was invalid,  Post your serial number here and post back the exact model MBP you have:
https://selfsolve.apple.com/agreementWarrantyDynamic.do
Ciao.

Similar Messages

  • Problems to avoiding local copy in the user's machine

    Hi All,
    I implemented the BadI DOCUMENT_FILES01~AFTER_START_APPL according to the wiki http://wiki.sdn.sap.com/wiki/display/PLM/Avoidinglocalcopyoforiginal for avoid local copy of original in the user's machine.
    This implementation only works for originals open through the ECL Viewer or MS Office Integration, avoiding local copy of originals in this cases.
    But the problem is that PDF files still being copy to temporary folder in the user's machine when I use ECL Viewer 6.0 with patch 5 implemented according to SAP note 1380587.
    If I implement the patch 5 for ECL Viewer 6.0 without the manually customizing in "Enviroment Variables" indicating in the solution section of the SAP note, then the PDF files are not copy to temporary folder in the user's machine.
    In test with ECL Viewer 5.1.2 and 5.1.3, this problem with PDF Files doesn't happen too.
    My system and customizing information:
    SAP GUI 710 PATCH 18
    ECL 6.0 with all patches installed 1 to 7 according to the SAP notes
    Data carrier
           - Define mount points/logical drive => Data Carrier: PC; Data Carrier Type: PC; Prefix for access path: PC
           - Define data carrier type "server, front end" => Data Carrier Type: PC; Description: local PC; path: c:\temp\
    Has anyone experienced this?
    Best Regards,
    Daniel

    Hi Daniel,
    regarding the display or handling of PDF files I have to say that here the local copy is required by the Adobe Reader and therefore the system has to made a local copy to display the PDF files correctly. This happens also if you display PDF files with the ECL Viewer because also the viewer requires an instance of the Adobe Reader which again needs a local copy. So for displaying PDF files a local copy is mandatory.
    Best regards,
    Christoph

  • Regarding the serial number of a vmware virtual machine

    Hi,
    How can we find out the serial number of a vm ? Are there multiple ways in which it can be done ?
    Thanks,
    Karun.

    from power shell run the following cmd and it will give you a vm serial
    gwmi win32_bios | fl SerialNumber

  • Need Query to fetch the users related to a particular process.

    Using FDI DB, Is there a way to fetch the # of users related to a particular process.

    For example,
    If all the roles within a PROCESSP starts with 'ABCXXXXXXXXX',
    I am using SELECT DISTINCT(FUEGO_ID) FROM FUEGO_PART_ASSIGROLE WHERE FUEGO_ASSIGROLE LIKE 'ABC%' to get the count of the participants.
    Is it the correct way?

  • Fetch the User Extended Attribute" Group" Value in Java

    Hi All,
    I have been able to add a User Extended attribute in SIM and wish to fetch its value for a particular user in my java code.
    kindly help.
    Thanks
    Sunny

    Hi All,
    I am able to fetch the value of extended attribute "Group" of type "Select" I added in the Default User Form using user.getAttribute("Group") in my java code of Custom Resource Adapter.
    This extended attribute has groups name populated in it. What I am doing now is that I am fetching the Group name value and assing the user this group. This is working fine for me. However, In case user select a different group next time, I need to remove the user from old group and assign him the new group. For this, I need to have the old group value and new group value. I don't know how to retrieve the old group value?
    Any pointer on this will be helpful.
    Note: I have done the mapping of extended attribute "Group" in my Custom Resource Adapter.
    Regards,
    Sunny

  • BAPI_GOODSMVT_CREATE + Serial Number locked by User

    I am posting a GR for a PO and assigning serial numbers in the goodsmvt_serialnumber table. This is working fine for small volumes ie 2000 , but when we reciept larger volumes e.g. 10,000 we are getting the error massage "Serial number    is locked by User    "
    Has anyone got any ideas ?? This program is a copy from one from our Legacy system, so I know that the code is ok, we are upgrading to ECC5.0 from 4.6C.
    Cheers
    Sharif

    Hello,
    I need to work with this BAPI. Actually I am in a "Pre Paid card Project". I 'll have to good receipt from purchase order about 2 million of cards. I am worried for performance problems.
    Do you have any problem in goods receipt for thsi quantity?
    Thanks in advance

  • Serial Number Lock by user

    Hi
    When I am doing the MIGO for PO which is having 30000 quantities and when I am assigning the Serial No then I am getting this error - 'Serial Number is already Locked by User' but actually this Serial No. is not being used by other person.
    Please suggest something how to proceed.

    Hi Sean,
    the below mentioned notes is how to unlock it.
    Goto SE11 and select the Lock Object radio Button. Click on F4
    you will see a popup asking to enter the Lock Object.
    Now Click on the + symbol ( which will show you further select options)
    Now enter the Base table. it is the Table which you have the Searial Number(Master data)
    and Hit enter. It will show you all the Locks existing for that table.
    Now Select the Lock which is locking the Serial Number.
    Now goto your code. from the pattern button Call the FM as DEQUEUE_Lock_object
    Hope This helps.
    Thanks.

  • Can I get the Mac address in Audit logs of Active directory server for the user's machine which connect to the network/Domain

    Hello All,
    I am trying to get the information of all the user's who connect to our Domain network by signing in using the domain account. For this I am using the Windows audit group policies ( I am not sure of there is any other way). I can see when the user tries
    to login to the network there is a audit event created on the AD/DC server. I can see the Kerberos authentication and logon/logoff events in the audit events under event viewer.  
              However the info which is being populated in these events include :- Hostname, IP address, Username and so on... But I can't see the MAC address of the user machine/system. Is there any way I can
    get the Mac address of the endpoint system as its one of the important criteria for our project.
    Any inputs on this would be appreciated, incase if there is any other way other than group policies please suggest.
    Thanks,
    Kavish

    > include :- Hostname, IP address, Username and so on... But I can't see
    > the MAC address of the user machine/system. Is there any way I can get
    > the Mac address of the endpoint system as its one of the important
    > criteria for our project.
    If you use DHCP, you can query the DHCP server. There's no builtin
    method to get the MAC address directly.
    Martin
    Mal ein
    GUTES Buch über GPOs lesen?
    NO THEY ARE NOT EVIL, if you know what you are doing:
    Good or bad GPOs?
    And if IT bothers me - coke bottle design refreshment :))

  • How can I instal fonts on the user's machine?

    Hello
    My application uses a font that probably most of the users don't have. Can I install it on the user's computer? How?
    Thank you!
    Alexandra.

    What kind of application is it? Is it a desktop application? If so, which UI? Once found out, look for the answer in the corner of the UI in question, [click for example|http://google.com/search?q=swing+install+new+font]. If it is a web application. then you may find sIFR interesting. Google gives enough hits on that keyword.

  • How to get MAC address list and HDD serial number from Windows and MAC machine?

    Hi,
    I'm developing a AIR application. I'm implementing the product key mechanishm. I need to identify the users' machines uniquely. I chose MAC address would be a better way. But a computer has list of MAC addresses including LAN card and Wi-Fi card addresses. So, I need to get the list of available MAC addresses from the computer and the Hard Disk Drive's serial number. HDD serial number would be helpful to cross verify the identity.
    I'm able to get the MAC address using NetworkInfo class. But I need to get a list of available MAC addresses and HDD serial number.
    Is there any classess to accomplish this task?
    Thanks in advance.

    See if this link can be of a little use to you.
    http://www.adobe.com/devnet/air/flex/articles/retrieving_network_interfaces.html#ionComHea ding

  • My MacBook was stolen over Christmas and i cannot find my serial number, i have a time machine which my macbook was backed up to can i retrieve my serial number from it and how?

    Anyone able to advise how to trace the serial number of my macbook pro that was stolen, I used it to purchase from iTunes and i have a Time machine with back up info. It was bought in 2009 and i cannot find my receipts for the police but need to provide a serial number? Help please

    If you enabled the Find My Mac application, than you can locate it from http://icloud.com
    If you do not have, than you should contact apple through the Apple Support Lane: https://expresslane.apple.com
    You can contact me by Private Message anytime for more help.

  • How do we fetch the top-level users and groups for a particular resource

    Hi Experts,
    I need to fetch the top level users and groups (permissions) for a particular resource, Currently i am able to fetch the effective users list.
    Thanks.

    To elaborate...
    Here we need the users and groups who have direct access to the resource. We dont want to resolve groups.
    Please help us with the apis to use in our java code to fetch the users and groups.

  • Please help..it's Urgent..How to fetch the value from table row from Page

    Hi,
    I have created a table with 2 LOV's , LOV2 is dependent on LOV2.
    Here I can not use the general Dependent LOV concept, as these values are coming from 2 different LookUps.
    I am not able to fetch the user input for LOV1 (from page) .that is why not able to set the where cluse fro 2nd LOVVO.
    I have used this code:
    if ("ViolationCat".equals(lovInputSourceId)) {
    OAMessageLovInputBean msglov =
    (OAMessageLovInputBean)webBean.findChildRecursive("ViolationCat");
    // String p_violation_category = "'"+(String)msglov.getValue(pageContext)+"'";
    String p_violation_category =
    (String)msglov.getValue(pageContext);
    // System.out.println(" p_violation_category =" +
    // p_violation_category);
    String v_violation_category = "";
    //System.out.println("vcat=" + vCat);
    OAViewObject violationVO =
    (OAViewObject)am.findViewObject("SNI_Violation_DtlsVO2");
    Number vcatViolationIdnum =
    (Number)violationVO.getCurrentRow().getAttribute("ViolationId");
    String vcatViolationId = "" + vcatViolationIdnum;
    pageContext.putTransactionValue("vcatViolationId",
    vcatViolationId);
    pageContext.putTransactionValue("p_violation_category",
    p_violation_category);
    String query =
    " SELECT LOOKUP_CODE, \n" + " MEANING, \n" +
    " LOOKUP_TYPE \n" +
    " FROM apps.fnd_lookup_values \n" +
    " WHERE LOOKUP_TYPE ='SNI_VIOLATION_CATEGORY' AND MEANING=?";
    PreparedStatement ps = txn.createPreparedStatement(query, 1);
    try {
    ps.setString(1, p_violation_category);
    ResultSet rs = ps.executeQuery();
    //System.out.println("before while,");
    // rs.next();
    // v_violation_category = rs.getString("LOOKUP_CODE");
    // System.out.println("v_violation_category="+v_violation_category);
    while (rs.next()) {
    //System.out.println("inside while");
    v_violation_category = rs.getString("LOOKUP_CODE");
    // System.out.println("v_violation_category=" +
    // v_violation_category);
    ps.close();
    } //try ends
    catch (Exception e) {
    e.getMessage();
    //System.out.println("in catch.." + e.getMessage());
    OAViewObject subCatVO =
    (OAViewObject)am.findViewObject("SNI_ViolationSubCategoryVO1");
    //System.out.println("get VO before where clause: subCatVO::"+subCatVO.getQuery());
    subCatVO.setWhereClause("LOOKUP_TYPE like '%SNI_VIOL_SUB_CAT_" +
    v_violation_category + "'");
    System.out.println("after set where clause VO: subCat VO::" +
    subCatVO.getQuery());
    subCatVO.executeQuery();
    // System.out.println("query of subCat VO::" +
    // subCatVO.getQuery());
    //End of sub category Validation
    It is working fine only for the 1st row of teh table.
    I have tried to fetch the value using :
    String violationCategory = (String)violationVO.getCurrentRow().getAttribute("ViolationCategory");
    String violationSubcategory = (String)violationVO.getCurrentRow().getAttribute("ViolationSubcategory");
    But it is fetching null value.
    Please tell me how can I able to fetch the values.

    Hi
    in your scenarion,first u have to identify the particular row of table where the changes is being made ,u have to use this code .when u select the lov ,first it will give the row refernce and then u have to catch the lov event
    OAApplicationModule am =
    (OAApplicationModule)pageContext.getApplicationModule(webBean);
    String event = pageContext.getParameter("event");
    if ("<ItemPPREventName>").equals(event))
    // Get the identifier of the PPR event source row
    String rowReference =
    262
    pageContext.getParameter(OAWebBeanConstants.EVENT_SOURCE_ROW_REFERENCE);
    Serializable[] parameters = { rowReference };
    // Pass the rowReference to a "handler" method in the application module.
    am.invokeMethod("<handleSomeEvent>", parameters);
    In your application module's "handler" method, add the following code to access the source row:
    OARow row = (OARow)findRowByRef(rowReference);
    if (row != null)
    thanx
    Pratap

  • How to get the user details

    Hi All,
       I want to fetch the user ID and email address, by using user details like first name, last name and user name.
      Could you please suggest me which tables I can refer to get these data. And I tried to fetch it from the view V_USR_NAME,
      But I could not able to get the data from the view by using select query. Please suggest me. Thank you

    Hi Sriram
       Thank you for your immediate response.. I have a gone through that thread and I noticed that in that case by using the email address we are getting the userID. But in my case I need to get both userID and email address by using first name and last name. I also tried to get the person number from ADRP table by using these fields (So that I can get the email address from ADR6 table by using the person number).. but the first name and last name are not the key fields..So got stucked there. Please suggest me how to proceed.
    Thank you

  • How to use the user and role API's and where to use it

    Hi All,
    I have configured SSO for my UCM11g. Now my application authenticates through the Oracle SSO login page. Currently it is working with SQL authenticator.
    Now, i have to use LDAP authenticator. when i will configure the LDAP authenticator, i have to use the user and role API's to fetch the user profile information from LDAP. i have got the API's which will be used to fetch the respected information, but i am not getting as where i will write those java programs and how this API will be used in my application. what settings i need to do on it so that application uses the API's. ?
    Please can anyone help me on this.
    thanks,
    Saurabh

    Hi, Mithu,
    Thanks a lot for your help in advance.
    I have carefully read the document: https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6b66d7ea-0c01-0010-14af-b3ee523210b5.
    Now, I think I have to set the processor of every actions in every process if I use the GP for processing the workflow.
    I am better to hope that I can set the processor to the role for every actions in every process in the runtime through get the organizational structure in the WDA(webdynpro for java or webdynpro for java). Thus, the customer don't set the processor to the role for every action in every process when runing in the GP.   I don't know how to do this. 
    Whether the function is not supported in the GP? If so, I have to config two organizational structure: in the R/3 and in the Portal. I don't think our customer don't receipt this solution.
    Do you give me some hints? Thanks a lot.  My email: [email protected]
    Thanks again.
    Thanks & Regards,
    Tao

Maybe you are looking for