FF 19 + Newest Adobe Reader = Failure. The newest update to FF with the newest Adobe reader is absolutely horrible. It is slow to load, slow to scroll pages,

Using FF19 and apparently Adobe reader 11.0.2.0. This new version is HORRIBLE, very slow to scroll pages, and flat out does not work with some work web pages I need. How do I revert to a previous version of Adobe to get back to the old format and layout that works well? I tried disabling the plug-in in FF and it did not change.

hello, firefox 19 has introduced its own integrated pdf viewer - if you want to switch back to the plugin you've used before to view pdfs just go to firefox options > applications & scroll down and define the default action for the '''portable document format (pdf)'''.
[[How to disable the built-in PDF viewer and use another viewer]]

Similar Messages

I'm trying to insall Adobe Photoshop CS3 on a new ASUS ASM11BB001O computer equipped with 64-bit Windows 7. I use a "bundle" approach, first loading Photoshop 6, then upgrading with CS upgrade and then CS3 upgrade. The installation goes smoothly until I

I'm trying to install Adobe Photoshop CS3 on a new ASUS ASM11BB001O computer equipped with 64-bit Windows 7. I use a "bundle" approach, first loading Photoshop 6, then upgrading with CS upgrade and then CS3 upgrade. The installation goes smoothly until I add PS CS, and then it balks at the "accept" Adobe conditions screen. I have two other (Gateway) computers with Windows 7, 64-bit, on both of which the PS-6, CS-CS3 pathway worked fine. Any thoughts on how to get this working? Thanks

If your goal is to install and activate CS5 there is no need to install anything preceding it. You will only need to have the serial number from the preceding version that you upgrade from (CS3 I guess).

HT1338 when I try to print, I get this error message "Communications Failure: The computer is no longer able to communicate with your printer. " followed by intruictions to turn off the printer and check connections etc. I am using an HP Officejet 6500 70

when I try to print, I get this error message "Communications Failure: The computer is no longer able to communicate with your printer. " followed by intruictions to turn off the printer and check connections etc. I am using an HP Officejet 6500 709e, connecter wirelessly

I'm using a mac (OS X - snow leopord) and am printing over the network (wirelessly).
HP Photosmart Premium Fax All in One - C410a
I was only able to print one page and then both my printer and my computer would display an error message about the printer's inability to print. Since then I've been able to resolve my specific problem.
I
1. uninstalled HP from my computer (checked to ensure that my printer was no longer visible in my printers and the HP Utility software was nowhere to be found),
2. grabbed the software/driver update from Aug, 2010,
3. installed the Aug, 2010 update, and my problems seem to have been fixed.
This is where I got my 2010 update from (obviously you should get the driver/software applicable to your OS and specific printer):
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-85379-1&cc=us&dlc=en&lc=en&...

Fatal: Communication Failure: The computer is no longer able to communicate

I was printing some documents and was doing great, all of a sudden the printer stopped and started showing this message;
+"fatal: Communication Failure: The computer is no longer able to communicate with your printer. Turn the printer off, check your printer connections and check for printer errors, and turn the printer back on."+
(the printer is a HP Photosmart 7760).
I've done everything I could think of to fix the problem but nothing (deleted the printer, re-added it, downloaded the new driver from the website, turned off and back on, re-started the computer) but then, I really really screwed things up when I went and deleted the "PrintJobMgr/Contents/MacOS/PrintJobMgr"
Wow! How smart. Now I'm trying to restore that file. I've looked in the internet to see if it is available, I got it from a friend but it doesn't work..
Please, can somebody tell me what can I do at this point.
Oh, I forgot to mention that the printer is connected to my Airport Extreme Router.
Help!
Message was edited by: sakko
Message was edited by: sakko

It sounds like you need to do a reinstall to get the PrintJobMgr back. I don't think you can use Pacifist (versiontracker.com) to install this separately, but it might be worth a try.
Reinstalling the PrintJobMgr should get you back to where you started. At this point, I would disconnect all the cables, turn off the printer, let it sit for a bit, then reconnect and power up the printer.
Hope this helps.

Communication Failure: The computer is no longer able to communicate with your printer.

Hello, I have a HP Officejet J6480 All-in-One printer. When I try to print, I receive this error message:
"Communication Failure: The computer is no longer able to communicate with your printer. Turn the printer off, check your printer connections and check for printer errors, and turn the printer back on."
I am using a Mac PowerBook G4, OS v10.5.7. I have tried the following:
-- rebooted my Mac
-- turned printer off/on
-- rebooted wireless router
-- tried to print using USB cable.
I continue to receive the same error message. Helllllllllllllllp!!!!
A couple of other things I need to mention: I bought this printer in June and have been able to print just fine since purchasing
this printer. As recently as Friday, July 3, I was able to print and printed 6 or 7 pages then. This is CRAZY!!!!
Thanks.
Barb
Message Edited by BarbNPhx on 07-05-2009 10:55 AM

I'm using a mac (OS X - snow leopord) and am printing over the network (wirelessly).
HP Photosmart Premium Fax All in One - C410a
I was only able to print one page and then both my printer and my computer would display an error message about the printer's inability to print. Since then I've been able to resolve my specific problem.
I
1. uninstalled HP from my computer (checked to ensure that my printer was no longer visible in my printers and the HP Utility software was nowhere to be found),
2. grabbed the software/driver update from Aug, 2010,
3. installed the Aug, 2010 update, and my problems seem to have been fixed.
This is where I got my 2010 update from (obviously you should get the driver/software applicable to your OS and specific printer):
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-85379-1&cc=us&dlc=en&lc=en&...

Adobe Reader 9 is not opening same files in Browser "Error in this Page"

Adobe Reader 9 is not opening same files in Browser "Error in this Page"
If I try to open this pdf file manually then its works.
The Error comes if I try to open Big Files or some else Files in the Browser.
This Error was not comming with Adobe 8.

To uninstall Adobe Reader, make sure (using Task Manager's Processes tab) that Adobe Reader is not running. Browser windows should also be closed.
If you still cannot proceed, try in Safe Mode, or use the Windows Installer CleanUp Utility.
P.S. Adobe AIR and Acrobat.com are not directly related to Adobe Reader, and can be uninstalled independently.

How on earth do you contact adobe - i lost my serial number before registering my standalone software...the phone service is offshore and not very helpful - the chat (i thought it was realtime) has been slow - if i understand, you need your proof of purch

how on earth do you contact adobe - i lost my serial number before registering my standalone software...the phone service is offshore and not very helpful - the chat (i thought it was realtime) has been slow - if i understand, you need your proof of purchase and they will issue a serial number

To help address performance issues the Identi-e web site is currently down for maintenance. If you are trying to redeem a product code to obtain your serial number for the Student & Teacher edition of our software you will currently be unable to do so. We would recommend installing the software in trial mode for the moment until the maintenance period is complete.

AMT subsystem failure-The licensing subsystem has failed catastrophically-HELP PLEASE!

Help!
I'm using CS3. First I was using it on XP. Got my new computer and have been using it on Windows 7 pro for 6 months now with no problems. Yesterday my Java updated, and now CS3 suite does not work.
1st, I got the: "Licensing for this product has stopped working—You cannot use this product at this time. YOU MUST REPAIR THE PROBLEM BY UNINSTALLING and then reinstalling this product or by contacting your IT administrator or Adobe customer support for help." message.
Since it said to REINSTALL, that's what I did. Only it would not install.
Adobe customer service is a joke. They with their non USA thick accents could not offer any help. They seemed stupid around this issue.
Then I did a system restore thinking I can go back to "things" before all the drama started.
Instead of fixing things, I got other message: "AMT subsystem failure—The licensing subsystem has failed catastrophically. You must reinstall or call customer support."
Again, tried to reinstall, and still will not allow me to install.
PLEASE HELP! I USE PHOTOSHOP EVERYDAY!
—GREGORY

Try running the CS5 clean tool and then reinstalling.
http://kb2.adobe.com/cps/829/cpsid_82947.html
Bob

HELLO, i wand do make an update " camera Raw" with the adobe installer - it was not possible - this was the massage -Photoshop Camera Raw 6.7-Update Installation fehlgeschlagen Fehlercode: U44M1P7

HELLO, i wand do make an update " camera Raw" with the adobe installer - it was not possible - this was the massage -Photoshop Camera Raw 6.7-Update Installation fehlgeschlagen Fehlercode: U44M1P7

You need to buy PSE13. But you can continue with PSE9 if you download and install the free DNG converter to convert your CR2 files to the Adobe universal Raw format and the DNG files will work with yoir existing software(keep your originals as backups and for use in the camera manufactures software)
Windows download (.exe file) click here DNG Converter 8.8
Mac download (.dmg file) click here DNG Converter 8.8
You can convert a whole folder of raw images in one click. See this quick video tutorial:
You Tube click here for DNG Converter tutorial

Just had Adobe Reader 11 installed on my Mac desktop. How do I extract pages from a PDF?

Just had Adobe Reader 11 installed on my Mac desktop. How do I extract pages from a PDF?

You can extract pages with Adobe Acrobat, not Adobe Reader.

Adobe Reader 11.0.10, will not print. Mssg "There were no pages selected" How do I print?

Adobe Reader 11.0.10, will not print. Mssg "There were no pages selected", even with pages selected. Tried "Image", same mssg err.; Printer has latest drivers. Printer prints everything else (browsers, docs, .xls), but not Adobe. Used cleaner to unistall, received Error: 5 on GetNamedSecurityInfo, and Could Not Set Owner. Any help would be greatly appreciated. Thx

Thank You very much !!!
Security (Enhanced): disable 'Protected Mode at startup'
has me back printing
How do I mark that you resolved my problem?

Alert: WebServices connectivity (Internal) transaction failure - The credentials can't be used to test Web Services.

Hi.
Could you please help me to resolve this issue.
I have SCOM 2012 installed to monitor environment with Exchnage 2010 SP3. There are 2 sites with Exchnage servers within the organization. There are 2 mailboxes being created to test both sites.
I am getting following alert:
Alert: WebServices connectivity (Internal) transaction failure - The credentials can't be used to test Web Services.
description: The test mailbox was not initialized. Run new-TestCasConnectivityUser.ps1 to ensure that the test mailbox is created.
Detailed information:
[Microsoft.Exchange.Monitoring.CasHealthUserNotFoundException]: The user wasn't found in Active Directory. UserPrincipalName: extest*****@****.local. Additional error information: [System.Security.SecurityException]:
Logon failure: unknown user name or bad password.
Diagnostic command: "Test-WebServicesConnectivity -MonitoringContext:$true -TrustAnySSLCertificate:$true -LightMode:$true"
EventSourceName: MSExchange Monitoring WebServicesConnectivity Internal
I have tried the next steps:
1. Verified that mailbox is exist and it's not locked (same for the second mailbox)
2. Deleted those mailboxes and created a new using new-TestCasConnectivityUser.ps1 verified that this mailbox is visible on all DC's accross the forest (both mailboxes)
and that temporary password was accepted;
3. Cleared the cache on the SCOM 2012;
4. Still getting the same alert
I will really appriciate any help.
Thanks.

Hi,
Hope these posts help you:
http://thoughtsonopsmgr.blogspot.ca/2013/11/exchange-server-2010-mp-no-synthetic.html
https://social.technet.microsoft.com/Forums/systemcenter/en-US/437f2bbb-cd96-40c3-8c56-6d4d176a9520/exchange-2010-mp-constantly-throws-webservices-connectivity-internal-transaction-failure?forum=operationsmanagermgmtpacks
Natalya
### If my post helped you, please take a moment to Vote as Helpful and\or Mark as an Answer

Logon failure; the user has not been granted the requested logon type at this computer (IE App)

Hello,
Question of a newbie:
In Windows Server 2012 I'm using IE10 to simulate numerous different users. But for some of these "fake" users I got the error:
Logon failure; the user has not been granted the requested logon type at this computer.
So I opened PowerShell : GPEDIT.MSC
Computer Configuration / Windows Settings / Security Settings / Local Policies / User Rights Assignment.
In the detail zone : Double-Clic sur Allow log on locally.
Dialog box : Allow log on locally properties
But the Add User or Group
button is grayed out!
What can I do?
Thanks for your help!

Several months after...
I found the solution : the user has to be member of the Server
Operators in Active Directory.
That's all :)
Thanks

I purchased the Adobe Creative Complete Plan for Annual Prepaid, and the Check Out just wouldn't proceed. It is still loading after click the confirm button. Dear adobe staff, please assist urgently.

I purchased the Adobe Creative Complete Plan for Annual Prepaid, and the Check Out just wouldn't proceed. It is still loading after click the confirm button. Dear adobe staff, please assist urgently.

I am having a similar problem. I am using Chrome and tried on Mac and on PC but the same. Its not completing my order and on PC saying:
We were unable to process your payment please contact our customer support.......... etc
But strangely its giving a confirmation button again. It gave me this error upon reconfirmation:
PMT_000011 : adbehme, en_IE, There is money to authorize, But no Aurthorize delegated were applicable, 12834289525

Failed to start worker process: Logon failure: the user has not been granted the requested logon type at this computer. (0x80070569

We just rebuilt our machine with server 2012, and it was working flawlessly and then randomly it started giving me this error if i would try to start up a machine. At first this was just an annoyance but now it is worrying me greatly. I have tried
everything from logging on as the domain admin account to the actual server administrator account. Nothing seems to start these machines up, and I need them to start.
'Computer1' failed to start worker process: Logon failure: the user has not been granted the requested logon type at this computer. (0x80070569).

Hi,
As this thread has been quiet for a while, we assume that the issue has been resolved. At this time, we will mark it as 'Answered' as the previous steps should be helpful for many similar scenarios.
If the issue still persists and you want to return to this question, please reply this post directly so we will be notified to follow it up. You can also choose to unmark the answer as you wish.
In addition, we'd love to hear your feedback about the solution. By sharing your experience you can help other community members facing similar problems.
Thanks!
Lawrence
TechNet Community Support

FF 19 + Newest Adobe Reader = Failure. The newest update to FF with the newest Adobe reader is absolutely horrible. It is slow to load, slow to scroll pages,

Similar Messages

Maybe you are looking for