FF 8 (and 8.0.1) doesn't ask for password until quit
Ever since version 8 FF only asks for the password after I click on "quit." Updating to 8.0.1 did not help. How do I reset it to ask for the password FIRST, before doing anything or going anywhere?
Superscore wrote:
I'm getting towards the end of a film project started on Logic 8.0.1, on a Mac Pro 3.0 with 5 meg of
ram. Getting ready to mix 45 cues I upgraded to Logic 8.0.2. It crashed on a regular basis, even
wouldn't open some cues at all. When it did open them, I frequently got the System Overload message,
even on cues that had only two audio and 5 midi tracks. I trashed the prefs, and went back to 8.0.1,
and the system runs fine.
I'm also on 8.02 and MacPro - but on Leopard - and I also work with various film projects, but don't have the problems you mention. Maybe it's a Tiger problem? Did you try the standard tricks like delete the undo list, reorganize memory?
Similar Messages
-
MacBook Pro, OS X 10.9.2, Pages 5.2
File is password protected but when I go to open it I'm not asked for password and therefore the file can't be opened. It shows up in the list of files as locked. I have opened this file with the password many times, but now I can't open it.I just got it to work...sorry for the message!
-
Outlook 2007 and 2010 on Windows XP keeps asking for password
I have a fresh installation of Exchange 2013 installed on Windows 2012 and the problem is that Outlook 2007 and 2010 which is installed on Windows XP keeps asking for password.
The problem occurs only on Windows XP while on Windows 7 is working fine.
Any help will be appreciated!Hello
I had similar issue in my environment -Exchange 2010 SP2 UR4-v2 ,DAG 2 MBX servers(MBX1 and MBX2) in production site ,2 CAS in production site ,17 mail box databases , Public folder replicated to all the mailbox servers.
strangely users using outlook 2003 and outlook 2007 were being prompted for user name passwords.
investigations were done as follows
1. test connection status -click on the outlook icon in the lower right of the users desktop.clicked on test connection status ..
2. found that the username was being prompted while attempting to connect to the public folder in MBX1 server.
3. using EMC on the exchange server, changed databases pointing to public folder in MBX1 to public folder in MBX2. This solved the issue for us.however we were not sure of what the exact issue was ..was it public folder corruption in MBX1? .we found
that the users were being prompted for username and password only in outlook 2007 and not in OWA or outlook 2010. this made us rule out possibility of Public folder corruption in MBX1 server.
4.raised a case with microsoft to do a RCA (root cause analysis) . The resolution from them was to change the exchange RPC service on MBX1 from "network service" to "local account" and switch back to "network service".
The reason stated by microsoft is "password cache corruption" .Any ways the problem was solved at the server level.
Hope this helps all of you who have been scratching your head over this issue
Shiva -
Gparted doesn't ask for password (SOLVED)
hi!
after a fresh reinstall of arch, when trying to start gparted, it doesn't ask me for root password. It simply says morelees that "gparted is potentially dangerous, and that i must be root". OK. But, in the previous arch installation, gparted, asked me for root password. and now no, why not?
In "privilige granting", su is selected, and it seems to work, as, for example, running "root terminal" it asks me for root password.
Thanks!
SOLUTION: With the menu editor in gnome, i changed the default command to "gksu -l /usr/sbin/gparted", i now, it promps for the root password. Thanks anyway!
Last edited by dienadel (2009-09-18 18:06:56)SEB-APPSTORE,
I had a similar issue this how I dealt with it.
older version it may be creating problems. (they just did this starting 6/10)
WRITE DOWN ALL INFO IN ALL EDITABLE PANES IN CASE NEEDED LATER
I had this issue with passwords before and I first went and changes the password with the ESP, then I went to keychain access, passwords category, there you should see 2 mail entries imap. mail.xxxx..., and another with your email @ xxxx....
They should say application under kind column
Double click one one of them to open, then click show password, it will prompt you for the admin password, and probably again with user as well as password. Enter that info and it should show you the password, delete the password and re-enter to match the web based mail password, click save.
Repeat this for the other one, basically the same drill as above.
Then launch mail and sent something to yourself, like test, it may now prompt you for your password, enter it and click remember in my keychain, then click get mail it may a minute or two for the server to pass it along but it should come.
It took me a while to remember this, as I did it quite some time ago, when my esp changed the mail, previously.
Hope this helps -
For example, when i was copied a plugin for after effects into the plugins folder, finder asked me for my password and now it doesn't. I can just copy it directly without any authentication.
Do you have Service Pack 1 for Windows 7? It's listed in the system requirements for CC 2014. If you don't have SP1, AE won't run.
That GPU sniffer error message is usually what happens. This should be a simple fix! Of course, you should always take the normal precautions when updating an OS, but still... -
Email doesn't ask for password, can't sign in
my email account does not give me a sign in page to put my password into.
Try http://mail.businesscatalyst.com. Enter your email address and password and you should be able to access your mail.
Cheers,
Mario -
I'm in a Hampton Inn trying to connect my apple tv to the wifi. Apple TV recognizes and says it's connected but doesn't ask for the password and is not actually connected because it can't download Itunes. How can I get the Apple TV to ask for a password. I noticed another wifi connection from someone in another room and when I clicked on that the Apple TV asked for the password, but doesn't for the hhonors wifi. Anyone know what to do?
Thanks vazandrew. I had to call the provider, but they have 24/7 service. They had to manually add the device. Thanks for your help.
Hank -
My apple tv stuck at setting date and time. Also when connecting yo network doesn't ask for network password
I just went through this last night. (Aug 15, 2013)
What I did to get back up and running. This is not the first time I have lost the network connection with my Apple TV 3
Products effected: Apple TV 3 and Home Sharing (My Apple TV 1 was not effected)
Power down (unplug) the Apple TV and power down your router ( in my case, it is a FIOS router, flipping the on/off works fine).
Power both items back up.
At this point, I usually can reenter my Apple ID and PW. and reconnect Home Sharing. But for some reason I was unable to reconnect last night but was able to get it reconnected in the morning. I was jut to tired to deal with it last night.
A new issue that is was able to fix after a good nights sleep.
I did figure out, (after trying to reenter my ID and PW many times and having it tell me that my ID and PW was wrong), that when using the Apple TV on screen keypad to type in the user ID. DO NOT use the ".com" keypad button. Instead type out each character for .com. ( or what ever ending you use for your ID account.)
Once I typed out my full ID and PW. everything is back to 100% -
My ipad has stopped updating apps. It doesn't even ask for password, it just oges to the apps screen showing empty progress bars. I've re-synced account and restarted but with no luck. Other than deleting the apps is there anyway around this?
OK. I will work backwards.
You certainly don't want to have to delete apps every time that they need an update, for any number of reasons. Losing data first and foremost would be a drag, but the overall hassle would be absurd. All things being equal, you should be able to update apps in the future after you delete them and reinstall them. I delete and reinstall apps all the time and I am also able to update them when updates are available for the apps. I just wanted to know if you had any success in any fashion installing apps.
Resyncing/refreshing the Apple ID/iTunes account wouldn't seem to be the issue either if you can download apps or other content from the iStores. Your ID is being accepted.
That leaves us with I'm not sure what. But I think I would try this trick fix and see if it helps.
Go to Settings>General>Date and Time>Set Automatically>Off. Set the date one year ahead. Try to update the apps again. If you get an error message, go back to the settings. Correct the date and time (set automatically) then go back and try to update the apps again. -
I have never had to enter a password to access mail.
However, recently, I keep being asked for password on my ***** address.
Only on my macbook. (which, btw, has a version number your drop down doesn't offer as a choice. I had to putt 9.4)
When I look up the account the "password" is a long string of gobbledygook. Something I would never do.
But when I attempt to use that pw I still can't get in.
I have no trouble accessing that email account on my mac mini. Just on the macbook.
<Edited by Host>Maiko,
I'm confess I'm still trying to get a handle on your problem. You do a fantastic job of describing it ... but I'm just trying to picture it accurately in my head.
I think, were I in your shoes, I'd begin by looking at what the debug page has to say for the specific destination in which you're interested in fixing. In other words, I'm not clear on where, exactly, this destination points ...
Destination illinois.edu.1945806043
Is that your site, or the division within your site that you want to fix? "Normally", you do not need to specify a site handle to get to your site within your transfer CGI ... if you say "uillinois.edu", it's enough to transfer your users to iTunes U ... but every site still has a handle, and you could, if you wanted to, actually specify it in your transfer CGI. For example, this:
Destination uic.edu.1139051993
is for my entire site ... it's my site handle. Whereas this:
Destination uic.edu.1991288441
is for a division within my site ... but it's impossible to tell the difference between "site" and "division" from just the handle (I mean, if I didn't say "this is a site" and "this is a division", there'd be no way for you to know). So when I look at your creds and permissions on your debug page, I can't quite tell if they give you download access for your site, or for the specific division you want to fix. If you could open the debug page with your division as destination (or confirm that that's what we're looking at), it'd rule out some things. -
Acrobat 10 pro doesn't ask for validation code
installing acrobat10 pro on imac with 10.8. When I try to open first time it doesn't ask for validation code. Application opens for a few seconds then crashes.I've tried installing 3 times with same results. What am I missing?
I thought I was buying the complete suite but it came as CS and Acrobat as separate discs, but I found a fix on one of the forums. I had to throw away an adobe folder that held the registration for CS and then it asked for Acrobat registration. Apparently I need to install Acrobat before CS?
Thanks for your response. -
Solaris 8 x86 doesn't ask for default route at install time
The Solaris 8 installation program doesn't ask what the machine's default route should be. This means that when you configure DNS servers later on that aren't on the same subnet as the machine you get error messages.
Anyone know a work around?Re: Solaris 8 x86 doesn't ask for default route at install time
I had the same problem.
I was wondering why something so essential is missing for the GUI Install, it would be possilbe a patch to correct this?, instead of configuring nsswitch, and another files.
The easier the install and admin, more users solaris will have on Intel Platform.
P.D. Sorry for my english.
05-sep-00 : 0:51 :GavinCam
The Solaris 8 installation program doesn't ask what the machine's default route should be. This means that when you configure DNS servers later on that aren't on the same subnet as the machine you get error messages.
Anyone know a work around? -
When trying to get new messages, keep getting asked for password and then get "operation couldn't be completed. (MFMessager error domain error 1032)-Why?
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
Cheers, Tom -
I just bought CC and the trial version of LR5 asks for a serial number...?
If you mean will you lose the work you've done in the trial version: no, you shouldn't.
Ideally, before you remove the trial version, back up the catalog. Go to Edit menu (in LR), Catalog settings... and click "Show", which will take you to the folder containing the catalog (for Windows, don't know about Mac). Make a note of that folder location, and preferably take a copy somewhere.
When you've installed the CC version (as BKKDon says), if the CC version doesn't open the existing catalog, go to File menu, Open Catalog... and take it to the existing catalog. -
Changed PW in my home network. Now when I try to log on I get "unable to connect" , but it doesn't ask for he new (or any) password, so I'm dead in the water. Any suggestions?
Use the Settings app to select your Wi-Fi network.
Settings > Wi-Fi > Select the Wi-Fi Network that will not work > then select Forget this Network
After to accept this choice your iPad should see your network again and allow you to enter the new password.
Maybe you are looking for
-
After iTunes requested that I download latest version on PC it now will not open. 2 error messages appear. first: The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem. second
-
Can't find other computer on network
My laptop is connected to my wireless router (Linksys) by Ethernet. The connection is working because I can get the internet on my laptop just fine, I just updated my Office applications; but I can't see my other, desktop computer for file sharing. I
-
I want to send a present, a music CD, to a friend that lives in another country(Brasil). I've read that the presents are valid only in the Country of purchasing How can I do?
-
Dear Experts, In our setup we are only using FI-AP (No MM) we have enhanced field CIN in general section of vendor. Currently we wanted to update CIN information on all the vendors for which I created LSMW. I noticed that when batch map is created th
-
Hi every one, I have created a view on tables MVKE,MBEW and T001(just for ref key(waers)) with the fields MANDT MATNR VKORG VTWEG MVGR4 STPRS BWKEY WAERS the data in the base tables is proper.When I am viewing the data from VIEW it is presenting to