FF37 on JB 4.2 device displays black screen in videos while sound runs correctly

After starting random video from sites like for example YouTube and Vimeo, smartphone (Samsung Galaxy grand neo) begin to lagging for a moment while video frame display loading symbol. Afterwards symbol disappear and screen turn black while sound plays correctly.
Problem first appeared after I had
updated FF from version 35 to 36 and its also visible on freshly installed FF37 beta. Strangely, on device default browser and chrome everything works fine and w/o any lagging. I tried to resolve this by turning off hardware acceleration in browsers settings, install specific addons(5html everywhere) and even reinstall FF36 and FF37b but nothing helped.
Any idea how to fix it will be highly appreciated. Cheers.

It has been already reported on the Bugzilla. https://bugzilla.mozilla.org/show_bug.cgi?id=1139844
If you have similar issue, please go to this page and upvote. That help gain attention and will increase probability for resolving issue in next edition. Cheers.

Similar Messages

Spotify only displays black screen after video driver crashes

Using Windows 8.1 64x, AMD 7800 series card with the latest AMD 15.4 beta drivers. This driver release is prone to crashing. Spotify, though, doesn't recover after the driver crashes and only displays a black screen. Restarting the program fixes the problem, but it shouldn't have to be restarted in the first place.

I am so sorry to hear this, was it after an ad, i should be able to help, could you also tell me which country you are based in!

My Mac book pro displays black screen says no bootable device insert boot disk. I have no boot disk to insert. What should i do.no bootable device"

My Mac book pro immediately displays black screen when I start up and says no bootable device insert boot disk. My question I don't have boot disk nor recovery disk to restore the system. Urgently needs your support and help. Thanks in advance. Michael l. Lluch

Hello
any chance you have try a bootcamp / win install into your Mac ??
if so
try this to boot into mac os
restart your mac , just after start up sound hold on "ALT" key to sart on drive manager
if that work select mac os volume using arrows key and validate by enter
HTH
Pierre

IOS adhoc displays black screen after launch

Hi,
my iOS application displays black screen after slash screen.nothing happens and couldn't see any proper errors on debug utility.
I can build adhoc using flash builder and it's works fine but problem occurs when I create ipa using dumped config file on command line(ant)
I'm using flex sdk 4.6 and AirSDK 15.0(overladed) .my application includes few native extensions.
mxmlc
mxmlc -load-config app-config.xml src/mobapp.mxml -output myapp.swf
adt
<target name="build-release-adhoc-package-ipa">
    <echo>::building captive-runtime release-adhoc ipa..</echo>
    <exec executable="${FLEX_BIN}/adt" failonerror="true">
        <arg line="-package" />
        <arg line="-target ipa-ad-hoc" />
        <arg line="-storetype pkcs12" />
        <arg line="-keystore ${provision.dir}/release-adhoc.p12" />
        <arg line="-storepass 12345" />
        <arg line="-provisioning-profile ${provision.dir}/release_adhoc.mobileprovision" />
        <arg line="${adhoc.dir}/ios-adhoc.ipa" />
        <arg line="${src}/mobapp-app.xml" />
        <arg line="myapp.swf" />
        <arg line="${icon.dir}/applicationIcon16.png" />
        <arg line="${icon.dir}/applicationIcon32.png" />
        <arg line="${icon.dir}/applicationIcon36.png" />
        <arg line="${icon.dir}/applicationIcon48.png" />
        <arg line="${icon.dir}/applicationIcon57.png" />
        <arg line="${icon.dir}/applicationIcon72.png" />
        <arg line="${icon.dir}/applicationIcon76.png" />
        <arg line="${icon.dir}/applicationIcon114.png" />
        <arg line="${icon.dir}/applicationIcon120.png" />
        <arg line="${icon.dir}/applicationIcon128.png" />
        <arg line="${icon.dir}/applicationIcon152.png" />
        <arg line="${base.dir}/[email protected]" />
        <arg line="-extdir ${src}/ane" />
        <arg line="-platformsdk /Applications/Xcode.app/Contents/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPh oneOS.sdk" />
    </exec>
    </target>
please help.

Hi,
my iOS application displays black screen after slash screen.nothing happens and couldn't see any proper errors on debug utility.
I can build adhoc using flash builder and it's works fine but problem occurs when I create ipa using dumped config file on command line(ant)
I'm using flex sdk 4.6 and AirSDK 15.0(overladed) .my application includes few native extensions.
mxmlc
mxmlc -load-config app-config.xml src/mobapp.mxml -output myapp.swf
adt
<target name="build-release-adhoc-package-ipa">
    <echo>::building captive-runtime release-adhoc ipa..</echo>
    <exec executable="${FLEX_BIN}/adt" failonerror="true">
        <arg line="-package" />
        <arg line="-target ipa-ad-hoc" />
        <arg line="-storetype pkcs12" />
        <arg line="-keystore ${provision.dir}/release-adhoc.p12" />
        <arg line="-storepass 12345" />
        <arg line="-provisioning-profile ${provision.dir}/release_adhoc.mobileprovision" />
        <arg line="${adhoc.dir}/ios-adhoc.ipa" />
        <arg line="${src}/mobapp-app.xml" />
        <arg line="myapp.swf" />
        <arg line="${icon.dir}/applicationIcon16.png" />
        <arg line="${icon.dir}/applicationIcon32.png" />
        <arg line="${icon.dir}/applicationIcon36.png" />
        <arg line="${icon.dir}/applicationIcon48.png" />
        <arg line="${icon.dir}/applicationIcon57.png" />
        <arg line="${icon.dir}/applicationIcon72.png" />
        <arg line="${icon.dir}/applicationIcon76.png" />
        <arg line="${icon.dir}/applicationIcon114.png" />
        <arg line="${icon.dir}/applicationIcon120.png" />
        <arg line="${icon.dir}/applicationIcon128.png" />
        <arg line="${icon.dir}/applicationIcon152.png" />
        <arg line="${base.dir}/[email protected]" />
        <arg line="-extdir ${src}/ane" />
        <arg line="-platformsdk /Applications/Xcode.app/Contents/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPh oneOS.sdk" />
    </exec>
    </target>
please help.

Imac have black screen. Start Computer sound come on, no picture. The last time I used the computer I put it to sleep, it never came back. i tried everything that was suggested including puting in the start up disk. The disk would not eject. Some one

Imac have black screen. Start Computer sound come on, no picture. The last time I used the computer I put it to sleep, it never came back. i tried everything that was suggested including puting in the start up disk. The disk would not eject. Some one suggested how to remove it and that did work. Computer going to Apple hospital Tues. July 3, thank you for all the suggestions.
Phyllis33

There is nothing wrong with the OS update.
Delete ALL your email accounts.
Restart Playbook
Put the accounts back and ensure they are all set with PUSH ON. Manual (push off) will burn battery.
Similarly delete your wifi connections and add back when required.
Turn off wifi is not connected to wifi.
Any "hunting for connection" in email or wifi will burn up battery.

Published .exe now only displays black screen on opening

Hi,
I'm using Captivate 6.1.0.319 and have recently updated my software simulation to include a few new slides and some revised annotations. Now whenver I preview the project I get the usual view and eveything works. When it's published as an .exe (which is the needed format) the screen goes black upon opening the file and right clicking displays "Movie not loaded" in the adobe flash info. Prior to this the project worked without a hitch. My previous iteration also plays back without a black screen. What do I need to do?
Thanks
Edit: choosing flash player 10.2 seems to resolve this issue. Ideally, it would be preferable to use player version 11, for users sake. What would be the reason for this issue?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and then take it back to where yo had the dock connector replaced. Apple will not help.

Nvidia displaying black screen on boot

Hi everyone,
Yesterday I migrated to arch after 2 years on Ubuntu. I've wanted to move a long time ago but I moved now because I really needed the Nvidia driver to work (on Ubuntu it wasn't). I am doing research in my university which requires me to program in CUDA. I installed the nvidia and nvidia-utils packages successfully. I also ran nvidia-xconfig, installed CUDA and installed the samples that came with them. When I ran the `deviceQuery` that came with cuda to check the status of the drivers I used to get (on Ubuntu as well) that no devices exist. When I rebooted I saw a black screen. I switched to tty2 and killed spectrwm (my TWM) and ran `deviceQuery` and showed that I was indeed running a CUDA friendly GPU. So I'm really happy that CUDA finally worked.
There is something running in the background and there is a UI running but I can't see it. For example I went to a tty and ran vlc song.mp3 and heard the music.
However I would really love to have a UI instead of doing everything on a tty.
Some things I tried to do
Deleted the x config file or/and the 10-nvidia file and rebooting, but end up with an error: no screen detected (the reason I have the /etc/X11/xorg.conf.d/10-nvidia.conf file)
I couldn't locate an error the X log
More information:
lspci | grep -i vga
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
01:00.0 VGA compatible controller: NVIDIA Corporation GF108M [GeForce GT 630M] (rev a1)
/etc/X11/xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 304.88 (buildmeister@swio-display-x86-rhel47-06) Wed Mar 27 15:32:58 PDT 2013
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
/etc/X11/xorg.conf.d/10-nvidia.conf
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BusID "PCI:1:0:0"
EndSection
/etc/modprobe.d/blacklist.conf
blacklist i915
EDIT
I have a .xinitrc file in my home directory and it is working
~/.xinitrc
#!/bin/sh
# ~/.xinitrc
# Executed by startx (run your window manager from here)
if [ -d /etc/X11/xinit/xinitrc.d ]; then
for f in /etc/X11/xinit/xinitrc.d/*; do
[ -x "$f" ] && . "$f"
done
unset f
fi
# exec gnome-session
# exec startkde
# exec startxfce4
# ...or the Window Manager of your choice
xrdb -load ~/.Xresources
xmodmap ~/.Xmodmap
exec spectrwm
Last edited by geezee (2013-07-12 15:14:13)

Looks like you have an Optimus setup. Have a look at this wiki entry - sounds like your issue.

Access 2010 Charts - Query runs but Chart displays black screen

Hi,
I developed a db in MS Access 2007 on my old PC and everything worked perfectly. After trying to open it on my new PC using Access 2010 the db works except the charts display as a black area.
After a bit of playing around I can say for certain that the queries for the charts are running correctly, (and of course the colouring of the chart is correct).
I tried deleting the charts but I got an error message saying "cant find the OLE library".
As I'm relatively new to creating exe files for transferring db's I'm thinking I need to bring the ole library with the db?? but I cant seem to find it on my old pc (maybe being stupid)
Please could you tell me if I'm barking up the wrong tree with this, or if there is a simple fix that I'm overlooking?
Many thanks
Tom.

I was having this exact same problem, then it just stopped. I am using the nouveau driver and I have a tnt2 card.
IIRC, I was having an unrelated problem with xorg or udev or something was having problems detecting my monitor, it claimed I had two monitors connected, I wrote an xorg.conf file and that fixed the problem. IDK if its is related or not because I don't recall exactly when things started working when I would switch ttys.
Try using the nouveau driver and see if it does the same thing, it has a kernel module so it might make difference,
Last edited by RiceKills (2010-07-06 23:39:27)

ARD 3 displaying black screen

I am running ARD 3 on my iMac to log into my power mac at work. I've been able to connect to the power mac but the display shows up as a black screen. it seems I have full control of the computer but I am unable to see anything. The problem seems to be with some setting on my Imac. I've been able to use a laptop to log in successfully with the display.

Well things got worse. Initially I could conenct to some clients but not the servers ??
Played around with it and found the answer. I thought it may be a network issue at the client end or possibly MTU size so played around with this and nothing.
SO - Changed the MTU size on MY machine in the network prefs and it all worked.
Just thought I'd post here as it may be useful to somebody.

IPod displaying black screen when I want to view photos

Hi,
here's the thing I wasn't able to find a solution yet. I synced some photo album from iPhoto to iPod nano 4gb (3rd gen). When navigating to photos with nano I see the album and inside the photos thumbnails but when I enter into the photo full screen mode to view photo nano just displays a black screen... no photo ...
Am I doing something wrong?

I did an update that my Macbook required and it sorted itself out, hope it works out for you.

27" Cinema Display - Black Screen

I have two of these 27" displays. One display works great. The other display has a black screen. It has power and will play music through the speaker and USB works. When I hold a flashlight up to the screen I can see what should be showing brightly and even read it (takes some work to read). When connected to the laptop it's recognized in the Display preferences etc.
This problem started by the screen going black from time to time. I could get it to come back on by unplugging etc. Then it went black and it won't come back.
I don't want to pay a bunch to repair. I'm very capable of doing the repair myself and with the tutorials online I can get it done. I've read numerous threads on this and several things are mentioned as the problem:
Blacklight or driver need replaced
Logic Board needs replaced
Power supply needs replaced (I don't see how it could be this since sound and stuff work on the display)
PRAM or clear preferences etc
I believe it's probably the backlight or driver and/or the logic board. I just don't know how to diagnose which it is. Any suggestions greatly appreciated.

I have the same issue. This a common issue with Apple's LED Cinema Displays since they first launched to replace their CCDL LCD's, it's not your system. I spent three years, using 2x 24" LED LCD"s that were problematic since day 1; power supplies and LCD panels replaced 2-3 for each. My AppleCare was due to run out in Oct., so I called AppleCare in May. Within 24 hours, they approved 2 new 27" LED Cinema Displays. Everything was working perfectly, until last night. One of the 27" displays shut down. As a communications and tech consultant (and former Apple Corp employee), I reset my Mac Pro's NVRAM and SMC, tried the display with my MacBook Air and Mac Mini, all three systems will not detect it. From my experience with Apple's horrible LED LCD's, it's definitely a power supply issue. I run my system off an APC SMART-UPS 1500 Sine Wave for servers, and my other display and 6-Core Mac Pro5,1 are fine.
Really disappointed in Apple's lagging quality. Before the LED LCD's I owned 2 23" CCFL LCD's that lasted me ~8 years before burnout began, which is fantastic. I don't know who produced the panels and internal components, but Apple had better get this together.
The thread I posted is below, hope this gains traction:
24" and new 27" LED Cinema Displays constantly malfunction, anyone having similar issues as below?

T410 & Windows 8 Pro 64bit - display black screen after wellcome screen

I'm using T410 and Windows 8 Pro 64 bit.
Sometime, when i boot start Windows, after Wellcome , the screen is black.
But when i press Ctrl+Alt+Del, its' appear Task Maneger...vv.v...... but when i try lo login, after then, it's re-appear Black Screen (with cursor)
I updated BIOS.
Display was updated by Windows 8 (not manual)
Please help me fix this issue.
Thanks !!!

Did you upgrade to Windows 8 or do a clean install?
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Flash 10,1,102,64 causes captivate files to display black screen

I noticed when we upgraded our computers to flash 10,1,102,64 it broke ALL of our captivate files. I called adobe tech support and they were worthless.. it doesn't seem to happen with the previous version of flash. When the Captivate lesson starts, it simply cuts right to a black screen... fortunately I figured out the solution.. so I'm sharing the knowledge.
The problem appears to be with ANY animated slide with animated text. The only solution I found was to remove animtated text and replace it with a static gif or jpg. Hopefully, the info is useful to any other frustrated users

So how does it work then for people who downgraded to the previous version of Flash? Should we still install the new .dll? Will the next Flash Player have this fixed in it? Just curious what you would recommend for the scenario where the current player isn't installed.
Thanks for the update and fixing the issue.
Dave

Itunes Screensaver just displays black screen

I just upgraded my older Macbook / Tiger OS to a new one with Snow Leopard and used Migration Assistant to transfer all of my files and settings. All of my Itunes music has artwork that I can see when I listen to them in Itunes. However, when I turn on the Itunes artwork screensaver, it just shows a black screen. Any help is much appreciated!

--HI I just checked the subject artwork to be my screensaver---the pane was black and then slowly filled in with 7 rows across by 5 rows down of thumb nails of art. I wonder if it depends on having enough songs so the art has more artwork to rotate with. My question is why does the time now not show up near a normal clockface location as it did in leopard.

2nd ATV displays black screen and apple logo on initial start up

I just hooked up my 2nd ATV and all I am getting is a black screen with the apple logo. I am using component video and composite audio. No HDMI hooked up. 1st ATV is unplugged. Also have network cable plugged in for now. Using timecapsule for wireless network. This is a second hand ATV, so it has been previously used and configured. I also attempted to hook up using an HDMI, but same result. I am not sure if the unit is trying to find the previous users network or not. The amber light flashes indicating start up. Nothing else on the screen, no question mark, rotating circle, just the logo. Every few minutes the screen goes blue (assuming it is my TV default colour) and then returns to the black screen and logo. I am on the correct TV input. Also tried, menu + '+' and menu + - on the remote for factory restore and screen settings.

melbri wrote:
I hope you are reffering to the possibility that the person I purchased the unit from may be a thief. I am working with him at the moment and building up to getting my cash back so he can deal with Apple. Thanks.
Sorry if my comments were misunderstood, I wasn't suggesting anyone was a thief, I was suggesting that without a receipt the store couldn't/shouldn't rely on the serial number to exchange/refund the tv, as proof of purchase.

FF37 on JB 4.2 device displays black screen in videos while sound runs correctly

Similar Messages

Maybe you are looking for