FI-AA reconci;lation- for year end closing(ABST2)

Dear Team,
This is with regard to Year end closure in Asset Accounting.
we are using T.code ASBT2, which is giving the differences in FA and GL recon,
can you suggest me the way to solve this Issue.
I have tried the GL with FS10n and Assets report to find the difference from period.
Issue is that as in the GL master the GL account is not flaged for Line item display, i am not able to view all the posting.
I hope lot of people have gone through ..this Issue, please guide if there is any other way or some thing missing. please let me know.
regards
sgs

hi,
i am not able to view all the posting.
-> use se16 for table bseg or reports like RFBPET00 to reconcile
search in forum for abst2
A.
Message was edited by:
Andreas Mann

Similar Messages

Prerequsits for year end closeing

Hi,
Any one can tell me wat r the things need to check before doing year end closeing in MM . I need this detail in all MM point of view .
Raghu

hi,
check whether theere is any open documents like PO, GR and IR...if so, then you should firstly, close it....
Also check whether there are any partial GR's done, if you need to complete that cycle, then do it at first...
You can check the same from PO history tab in the PO and EKBE table in SE16...
Regards
Priyanka.P

Program RFSUMB00 for italy year end closing

Hello All,
I am setting up all the configurations for year end closing in Italy using program RFSUMB00. Here i need some clarification on the below points.
1. dummy vendor / customer master needs to be created for each recon account. here i would like to know whtr we need to create a dummy recon account for dummy vendor / custome? if no, how would postings be happen.?
2. we need b/s opening and closing accounts for this prog. I would like to know wht entries will happen at the year end and whtr all b/s closing postings will happen to same account?

Hi,
I hope dummy accounts are not required. Please try as below. For balance sheet closing and opening accounts you can use technical accounts which we use for initial balance uploading. This program will generate one closing entry and one opening entry with the help of technical account what I have mentioned so that the balances will become ZERO in previous FY.
Closing entry happens in previous fiscal year and opening entry will posted in current FY.
Please go for FAGL_IT_02 - Italy (New). Do not go for F_IT_01 - Italy. There are some prerequisites before executing this program.
Please close normal periods of previous fiscal year and ensure that special periods of previous fiscal year are opened. Means special periods should be available for postings.
Closing postings should happen in special periods. Try with 14th period.
I suggest to run this program only in L1 ledger as this only legal requirement.
Below is for your reference where July to June Fiscal year is maintained.
P&L Account                              550016 (result of PNL account)
Net Result Account                     101001 (Retained earning account)
Balance Sheet Account- Closing 800005 (Technical account)
Balance Sheet Account- Opening 800005 (Technical account)
Parameters for closing postings:
Document Type                   UE
Posting Date                       30.06.2013
Document Date                   30.06.2013
Posting Period                     14
Parameters for opening postings:
Document Type                   UE
Posting Date                        01.07.2013
Document Date                    01.07.2013
Posting Period                     1
Try with above inputs. I hope it will resolve your issue. I have resolved in the same way in our project for Turkey.
Regards
Anand

Program RFSUMB00 year end closing in Italy.

Hello All,
I am setting up all the configurations for year end closing in Italy using program RFSUMB00. Here i need some clarification on the below points.
1. dummy vendor / customer master needs to be created for each recon account. here i would like to know whtr we need to create a dummy recon account for dummy vendor / custome? if no, how would postings be happen.?
2. we need b/s opening and closing accounts for this prog. I would like to know wht entries will happen at the year end and whtr all b/s closing postings will happen to same account?

Hi,
I hope dummy accounts are not required. Please try as below. For balance sheet closing and opening accounts you can use technical accounts which we use for initial balance uploading. This program will generate one closing entry and one opening entry with the help of technical account what I have mentioned so that the balances will become ZERO in previous FY.
Closing entry happens in previous fiscal year and opening entry will posted in current FY.
Please go for FAGL_IT_02 - Italy (New). Do not go for F_IT_01 - Italy. There are some prerequisites before executing this program.
Please close normal periods of previous fiscal year and ensure that special periods of previous fiscal year are opened. Means special periods should be available for postings.
Closing postings should happen in special periods. Try with 14th period.
I suggest to run this program only in L1 ledger as this only legal requirement.
Below is for your reference where July to June Fiscal year is maintained.
P&L Account                              550016 (result of PNL account)
Net Result Account                     101001 (Retained earning account)
Balance Sheet Account- Closing 800005 (Technical account)
Balance Sheet Account- Opening 800005 (Technical account)
Parameters for closing postings:
Document Type                   UE
Posting Date                       30.06.2013
Document Date                   30.06.2013
Posting Period                     14
Parameters for opening postings:
Document Type                   UE
Posting Date                        01.07.2013
Document Date                    01.07.2013
Posting Period                     1
Try with above inputs. I hope it will resolve your issue. I have resolved in the same way in our project for Turkey.
Regards
Anand

AJAB year-end closing no data

Hi,
We are running transaction AJAB for year end closing of Asset Accounting. We are trying to close fiscal year 2010.
In test run, it is showing no errors, but it is also not displaying any data. I expect it to show some information on the assets that will be affected, though no data is being shown.
What could be the problem? I noticed that depreciation may need to be recalculated (AFAR). Could this affect year-end closing?
Thanks,

Hello,
This transaction will not show you any data since it is only required for the technical purposes. While running t-code AJAB, is displaying "NO" under the "Other Error" column then it means you don't have any issues while doing the year end-Closing.
Did you make any changes to any asset after completing your depreciation run for 12 month? If yes, then it is recommended that you do run transaction "AFAR" so the depreciation will be correcting for that asset before you actually do the year end closing for Fixed Asset.
However, if you are sure that you have not made any changes to any of your assets then you don't have to recalculate the depreciation.
Thanks

Back up plan for Asset year end closing

Hi,
Do you have any back plan prepared for Asset year end closing especially t.code AJRW and AJAB (running this in Background).
what back up plan we should recommend if it fails for already happened activities.
Regards
Shanu

Hi Shanu,
there is a Test-run modus.
If it fails for some reasons, you will get a error message. Then you solve this error and repeat AJRW or AJAB.
regards Bernhard

Getting error while Year end closing in asset accounting for the year ...

Hi,
i am getting error while doing Year end closing in asset accounting for the year 2004. It is giving few assets and saying that "Depreciation not posted completely"
Can any body help in this reagards.
With regards,

Dear Shree,
Do u have the list of all such assets for which no depreciation has been posted. If yes, then go to AFAB, upload the list all these assets & then select the radio button as 'repeat'.
This will post you depreciation for all the assets. then close the year.
regards,
Ajay

Undo Year end closing for Asset

Hi,
I need to undo year end posting for Asset and recalculate depreciation according to the changed laws.
Is there any prerequisite/constraints to be taken care of before running OAAR(undo year end closing) and AJAB(year end closing) after required postings are done. Any other financial impact does these transactions have apart from the desired depreciation calculation?
Any help in understanding the scenario will be highly appreciated.
Regards
Shilpa

Hii
Difference between the two transaction code are
OAAR-undo by depreciation area
OAAQ-undo by company code.
in the first one u r only opening the depreciaiton area that is already closed.
and in later u r opening whole company code
Yes after the new depreciation run it will be adjusted but while running u need to select repeat run in T.Code AFABN.
Through repeat run it will take into consideration the changed values and again calculates the depreciation.
so values will be adjusted.
Thanks
sejal

Take back Year End Closing for Fixed Asset

Dear all,
Is it possible to reverse a year-end closing in Fixed Asset? If yes, how to do it and what are the consequences?
Users need to carry out some corrections for the closed year!
Thanks for your help.
Nas.

Hi.
Thanks for answering. If I change it in trans. OAAQ manually, should I re-run depreciation run before running the closing transaction AJAB again?
Thanks,
Nas

Dates for doing Year End Closing and in which client

Hi,
I have some doubts with Year End Closing Activities.
1. Mine is an India Company following a non calendar year and period. Which date I should do the Year End Activities.
2. Which activities should be done on Production server directly and which one to be done in Development and Quality. Kindly list the activities.
Please advice.

Hi
The following are to be done before 31-03-2014 only upto sl no.7.
1. Document Number ranges copy to a fiscal year: OBH2
2. Internal Number ranges for challans : J1INUMBER
3. Witholding TAx certificates : J1INCT need not be necessary now since
    we have to issue certificates by downloading the data from IT site.
4. If you have excise maintain the number ranges for the following objects:
Objects
Object Description
J_1I57FC
57FC Number Range Object
J_1IARE1
ARE1 Doc No object based on Series Group
J_1IARE1
ARE3 Doc No object based on Series Group
J_1IBOND
Excise Bonding: Bond number object
J_1ICERT
Withholding Tax Certificates (India)
J_1ICHLNNO
Internal number range for challans
J_1ICONPLA
Consolidated PLA serial no. generation
J_1IDEPINV
Excise Invoice Number for Depot Invoices
J_1IEXCEXP
Export excise invoice number range
J_1IEXCINV
Excise invoice number
J_1IEXCLOC
Local excise invoice numebr range
J_1IEXCTST
Excise invoice with intervals
J_1IEXINEX
Excise invoice number for export
J_1IINTNUM
Internally document number to be generated
J_1IINTPR2
Despatch serial number
J_1ILIC
Excise Bonding: License number object
J_1IPLA2
PLA part II number range object
J_1IRG1
RG1 Number range object
J_1IRG1_T
No. Range for RG1 - Excise group / Material
J_1IRG23A1
RG23A part 1 no. range object
J_1IRG23A2
RG23A part II number range object
J_1IRG23C1
RG23C part I number range object
J_1IRG23C2
RG23C part II number range object
J_1IRG23D
Folio Numbers for RG 23D
5. If you have Plant Maintanance also, ensure wage rates are maintained
    for activity/cost center combination in KP26, if you are tracking wage
    cost as secondary cost element.
6. Ensure maintaining the version else sometimes your Payroll also may not work.
7. S_ALR_87003642 - Open and Close Posting Periods
8. After Board meeting and when the Balance Sheet is approved you do the rest viz.,
    FAGLGVTR, F.07
9. Asset Accounting related transactions can even be done after 1st April.
The above would be carried out naturally in Production client. Since we would be posting certain transactions in testing clients also it is advisable to do the above in testing clients also.
Regards,

Issue in year end closing

Hi
I have an issue in year end closing. What would be effect if i do not clear the open items in GR/IR Account as part of year end acitivity. The balance in my GR/IR Account is zero as of my balance sheet date.
What would happen if i run the balance carry forward program?
Regards
Sanil Bhandari

This program will reclassify the entries for the Balance sheet reporting. Since your balance is zero there should not be any impact on the reporting side. Whether you run this program or not it will not have any impact on the balance carry forward program. Since these entries will get reversed at the beginning of the next period in any case.
The config setting will be in OBYP
The following config document may help you in better understanding.
Define Adjustment Accounts for GR/IR Clearing
The goods receipt/invoice receipt (GR/IR) clearing account is posted to whenever you receive goods that have not been invoiced yet or whenever you receive invoices for goods that have not been delivered yet.
In this activity you define the numbers of the adjustment and target accounts for the automatic postings for the GR/IR clearing account.
Transfer postings have to be made at the balance sheet date to reflect the goods invoiced but not delivered and the goods delivered but not invoiced. The program that analyzes the GR/IR clearing account adjustments this account by posting any outstanding amounts to an adjustment account. It makes the offsetting entry to the account for goods delivered but not invoiced or to the account for goods invoiced but not delivered (target account).
Edited by: Sivakumar Gopalakrishnan on Jan 15, 2008 4:11 PM

GL balances differences between Year end closing and opening balances

Hi friends,
One GL account balances showing differences between year end closing & year opening balances.
Example: 2006 closing balance is 250000 $
2007 opening balance is 150000 $
difference is 100000 $ . why should coming like this. already completed balances carryforward (F.16) in 2006 & 2007 year.
any programe for this solution ?
One more point is just 2 days back i posted 2 entries for 2006 year equal to 100000 $ . after this entries shall we need go for F.16 (carry forwarded balances).
please do the needful. It is very urgant issue.
Raj

HI,
There shouldn't be any more postings to a GL Account once Balance carry forward has been executed.
If postings have been made then you should execute the Balance carry forward again, otherwise you will see difference in opening and closing GL balance (as mentioned by you).
Regards

FI Year End Closing

hi...
pls tell me t.code for following List for FI Year End Closing
1 Execute Report for InterCompany Activity & Journal Entries
2 Open posting period for next yr
3 Run Business Area's Assignment report.
4 Review list of recurring journal entries
5 Execute Recurring Entries for A/R, A/P, G/L
6 Process Parked A/R, A/P, G/L accounting documents
7 Final Cutoff for the Maintenance of Fixed Asset- Add Transfer and Retire
8 Run Depreciation in Test Run and post
9 Verify Display Log for Depreciation Test Run
10 Capitalize AUC Assets if needed
11 Enter Payroll Data to SAP
12 Verify Depreciation Balances with GL balances
13 Post Depreciation
14 Execute Asset History Report, and retire assets if needed
15 Adjust specific depreciation areas if necessary
16 Reconcile AM subledger with GL
17 Check Bank Data
18 Review AR Open Items
19 Review AP Open Items
20 Execute Pending Invoices
21 Clear Open Item for GRIR, freight
22 Reconciliation of Financial Documents and transactional figures
23 Open new CO Posting Period
24 Compare current (cost estimates) with last current price (Moving Avg)
25 Update current cost price to material master price field.
26 Process Freight charges, Match SD freight to actual
27 Review Internal Order Postings
28 Settle All Orders
29 Verify All Post Goods Issue have been Invoiced (Billing Due List)
30 Review SD Billng Doc from prior mth that have not yet been released to accounting
31 Reconciliation of MM movements in Transit Intra-SAP to NonSAP
32 Reconcile PI Inventory with SAP
33 Perform Manual Adjustment if needed
34 Verify balance of the GR/IR account
35 Post Accruals and Deferrals
36 Clearing of Cancelled Documents
37 Check Profitability Segment Adjustment
38 Aging Report-Reconcile GL balances with subledger balances AP
39 Check the check run numbers
40 Bank reconciliation Data
41 Enter Tax Journal Entry
42 Reconcile GL balances with subledger balances AR/MM/AP
43 Display Balance Sheet Adjustments
44 Post Balance Sheet Adjustments
45 Post Foreign Currency Valuation (foreign exchange)
46 Check generic cost centers for posting with wrong accounts
47 Correct wrong postings on generic cost centers
48 Check Validation dates for Cost Centers, Cost Elements, CO area
49 Check COGI--for both month end and year end
50 Doubtful receiviables
51 Verify In-transist Inventory
52 Reconcile PA to G/L
53 Post Cost Centre Assessments and Distributions
54 Run CO-FI Reconciliation to balance
55 Run BW reports P&L and Balance Sheet
56 Maintain CO yr variant
57 Fiscal Yr Balance carryforward AP/AR/AM
58 Fiscal Yr Balance carryforward CO
59 Fiscal Yr balance carryforward FI
60 Fiscal Yr balance carryforward PCA
61 Set Document number ranges - FI - new year
62 Set Document number ranges AP/AR - new year
63 Generate Financial statement Reports
64 Change Fiscal Year For Assets
65 Year end Closing-- Asset Accounting--final for year end
66 Close CO Posting Period
67 Close Prior A/R Posting Period
68 Close Prior A/P Posting Period
69 Close Prior MM Posting Period
70 Reverse accruals and deferrals for the new month
71 Reconciliation of Financial Documents from old fiscal year and new fiscal year
72 Load Balances, Budget Data for Cost centers, sales
73 Update Retained Earning Account , balance carry fwd
Thanks & Regards
Rekha Sharma

Hi,
Please check this
1 Execute Report for Inter Company Activity & Journal Entries
2 Open posting period for next yr (T.Code: OB52)
3 Run Business Areau2019s Assignment report. (T.Code: F.50)
4 Review list of recurring journal entries (T.Code: FBD3)
5 Execute Recurring Entries for A/R, A/P, G/L (T. Code: F.14)
6 Process Parked A/R, A/P, G/L accounting documents (T.Code: FBV0)
7 Final Cutoff for the Maintenance of Fixed Asset- Add Transfer and Retire (T.Code: ABUMN)
8 Run Depreciation in Test Run and post (T.Code: AFAB)
9 Verify Display Log for Depreciation Test Run (T.Code: AFBP)
10 Capitalize AUC Assets if needed (T.Code: AIAB, AIBU)
11 Enter Payroll Data to SAP (T.Code: CAT2)
12 Verify Depreciation Balances with GL balances ( T.Code: ABST2)
13 Post Depreciation (T.Code: AFAB)
14 Execute Asset History Report, and retire assets if needed (T.Code: S_ALR_87011963, ABAVN)
15 Adjust specific depreciation areas if necessary (T.Code: ABCO)
16 Reconcile AM sub ledger with GL (T.Code: ABST2)
17 Check Bank Data (T.Code: S_P99_41000212)
18 Review AR Open Items (T.Code: FBL5N)
19 Review AP Open Items (FBL1N)
20 Execute Pending Invoices(T.Code: MRBP)
21 Clear Open Item for GRIR, freight (T.Code: F.13)
22 Reconciliation of Financial Documents and transactional figures (F.03)
23 Open new CO Posting Period: (T.Code: OKP1)
24 Compare current (cost estimates) with last current price (Moving Avg) ( T.Code: OKBH)
25 Update current cost price to material master price field (T.Code: CK11N, CK24)
26 Process Freight charges, Match SD freight to actual (T.Code: V-31)
27 Review Internal Order Postings(T.Code: OKSA)
28 Settle All Orders (T.Code: KO88)
29 Verify All Post Goods Issue have been Invoiced (Billing Due List) (T.Code: VF04)
30 Review SD Billing Doc from prior month that have not yet been released to accounting (T.Code : F.2D)
31 Reconciliation of MM movements in Transit Intra-SAP to Non SAP
32 Reconcile PI Inventory with SAP (T.Code: MI07)
33 Perform Manual Adjustment if needed (T.Code: F-02, FB50)
34 Verify balance of the GR/IR account ( T.Code: MB5S)
35 Post Accruals and Deferrals (T.Code: FBS1)
36 Clearing of Cancelled Documents (T.Code: F-03, F-32, F-44)
37 Check Profitability Segment Adjustment (T.Code: KISR)
38 Aging Report-Reconcile GL balances with sub ledger balances AP ( T.code: FBL1N, FBL5N, FBL3N)
39 Check the check run numbers (T.Code: FCH1, FCHI)
40 Bank reconciliation Data (T.Code: FF67 & FEBA)
41 Enter Tax Journal Entry (T.Code: FB41)
42 Reconcile GL balances with sub ledger balances AR/MM/AP ( T.Code: F.03)
43 Display Balance Sheet Adjustments (T.Code: F.5F)
44 Post Balance Sheet Adjustments (T.Code: F.5E)
45 Post Foreign Currency Valuation (foreign exchange) (T.Code: F.05)
46 Check generic cost centers for posting with wrong accounts
47 Correct wrong postings on generic cost centers
48 Check Validation dates for Cost Centers, Cost Elements, CO area (T.Code: GGB0)
49 Check COGIu2013for both month end and year end
50 Doubtful receivables (T.Code : F104)
51 Verify In-transit Inventory
52 Reconcile PA to G/L (T.Code: KE5U)
53 Post Cost Center Assessments and Distributions (T.Code: KSU5 & KSV5)
54 Run CO-FI Reconciliation to balance (T.Code: KALC)
55 Run BW reports P&L and Balance Sheet
56 Maintain CO yr variant (T.Code: KCRQ)
57 Fiscal Yr Balance carry forward AP/AR/AM (T.Code: F.07,
58 Fiscal Yr Balance carry forward CO (T.Code: CXS1)
59 Fiscal Yr balance carry forward FI ( T.Code: F.16)
60 Fiscal Yr balance carry forward PCA (T.Code: 2KES)
61 Set Document number ranges - FI - new year (T.Code: OBH2, OBA7)
62 Set Document number ranges AP/AR - new year (OBA7)
63 Generate Financial statement Reports ( T.Code:OB58) OR (T.Code: FSE2)
64 Change Fiscal Year For Assets (T.Code: AJRW)
65 Year end Closingu2013 Asset Accountingu2013final for year end (T.Code: AJAB)
66 Close CO Posting Period : (T.Code: OKP1)
67 Close Prior A/R Posting Period ( T.Code: OB52)
68 Close Prior A/P Posting Period (T.Code: OB52)
69 Close Prior MM Posting Period (T.Code: OMSY)
70 Reverse accruals and deferrals for the new month (T.Code: F.81)
71 Reconciliation of Financial Documents from old fiscal year and new fiscal year ( T.Code: FNSL)
72 Load Balances, Budget Data for Cost centers, sales
73 Update Retained Earning Account , balance carry fwd (T.Code: F.16)
Regards,

Year End Closing Process

for year end process:
1)I need to Post all these items (i.e; B/S and P/L a/c items) for November 2007 and December 2007. please help me how to post all these items*
2)after posting I need to carryforward AR, AP, GL Balances to January 2008
3)then I need to do year end closing process.
BalanceSheet items:
Liabilities: Capital, Other Loans, Account Payable, Income received in advance, Provision for bad debts,
Outstanding expenses: wages, salaries, rent, taxes
Assets: land n building, machinery, vehicles, furniture,Investment, Bills receivable, accounts receivable,
Prepaid expenses, cash at bank
Profit & Loss items:
Expenses:Salaries,travelling,rent,postage,insurance,interest,advertise,audit & legal fee,repairs, depreciation.
Income: gross profit b/d,interest earned,commission earned,other income
so i need to make all these items fresh postings then i should carry forward it to january, then year end process.please help me how to post all these items then i can proceed further.
thanks in advance. i'll award points..

hi,
SAP FI Month End and Year End Activities
1 - Maintain Activity prices - KP26
2 - Release of Standard Cost Estimate - CK40N
3 - MM period close and open - MMPV
4 - FI period open
5 - Parked documents to be posted - FBV0, MIRO
6 - Reposting of Inter Office CC - KB61
7 - Bank Reconciliation
8 - Update Section Code where missing - J1INPP
9 - Maintain GRIR clearing - F.13
10 - Provision for current month - FB50
11 - Depreciation entry - FB50
12 - Exchange rate - To be Updated
13 - Revaluation of foreign currency open items - F.05
14 - Recognition of Inventory at Bonded warehouse - FB50
15 - Maintain Statistical Key Figures - KB31N/KP46
16 - Variance Calculation of Process Orders - KKS1
17 - Settlement of variances - CO88
18 - Assessment cycles - Aux/WH CC to Main CC - KSU5
19 - Assessment cycles - Functional CC to SBU CC - KSU5
20 - Assessment cycles - SBU CC to COPA - KEU5
21 - Profit Center Reposting - 9KE0
22 - Balance Sheet Adjustment calculation - F.5D
23 - Transfer Profit Center to AR & AP - 1KEK
24 - Transfer Inventory to PCA - 1KEH
if you want more details log on to following link.
http://help.sap.com/erp2005_ehp_02/helpdata/en/eb/1376b443c411d1896f0000e8322d00/content.htm
assign points if its useful

Queries regarding Year End Closing Activity

Hi Experts/Moderator,
I need solution to my queries regarding Year End Closing Activity?
1. How can we post adjustment entries to GL/AR/AP/BANK/ASSET accounts in the previous FYu20192008 in Apr/May/Jun/Julyu20192009 using Special Posting Periods, if already balances are carrying forwarded to next FY 2009? What effects on the Opening Balances already carry forwarded?
2. Can we run the Asset Depreciation for the previous FY 2008 in Apr/May/Jun/Julyu20192009 using Special Posting Periods, if already balances are carrying forwarded to next FY 2009? What effects on the Opening Balances already carry forwarded?
Thanks & Regards
Chandra

Hi,
You can carryforward the balance of GL, AP & AR. System is automatic updated the balance in current fiscal year if you pass the adjustment entries in previous fiscal year 2008 using special period. You can also run the deperciation.
Regards,
Pankaj

FI-AA reconci;lation- for year end closing(ABST2)

Similar Messages

Maybe you are looking for