FI Dunning Letter: Requirement to get Sales Organisation of the letter

Hi folks,
I would like to know how to get the Sales Organisation of the dunning letter. Basically the dunning is performed from transaction f150 and the company code is the factor for deciding the texts to be printed on it. Now I have a requirement where I have to print a few texts on the dunning letter based on the Sales Organization.
Can you please help me identify from where I'll get the Sales Org.
Thanks in advance.
Rahul

Hi
You don't need to change the print because sold to party and bill to party are both customer for FI, so u need only to know the right customer code.
Max

Similar Messages

  • Get Sales organisation and Corresponding Distribution channel and Division

    Hello,
    My requirement is to is to retrieve Sales organisation and Corresponding Distribution channel and Division.
    Was going through the thread : [sales organization and distribution channel |Re: sales organization and distribution channel;
    to find the FM : CRM_BUPA_SALES_AREA_GET_ALL.
    I do not have a CRM system to check what this FM does.
    Is there any similar function module?
    Regards,
    Remi

    Hi,
    Based on what data you want to retrieve thsese fields?
    Can you please give more details on your requirement?
    I think from table KNVV you will get these info.
    Best Regards,
    Deepa Kulkarni

  • Get sales documetn of the invoice from VBFA table

    In my user exit, i use to get the sales document from the table.

    Hi Kranthi Kumar ,
    If u want to know the sales document no of a invoice document from VBFA.
    u have a fields VBELV (Preceding sales and distribution document) for this document if you want to know whether it is a
    invoice or delivery or etc you can know using the field VBTYP_V (Document category of preceding SD document).
    Similarly,
    u have a fields VBELN (Subsequent sales and distribution document) for this document if you want to know whether it is a
    invoice or delivery or etc you can know using the field VBTYP_N (Subsequent category of preceding SD document).
    for ex if vbeln is a invoice docu then preceding document(VBELV) is a delivery.
    check again the VBELV docu no in VBELN field
    which is a delivery
    check the preceeding docu for that delivery docu in VBELV which obviously would be a sales order.
    *Else if you want to know directly the corresponding sales document go to VF02  enter that particular invoice number and then go to the document flow.(F5).
    Hope its useful.
    Revert back to me for any other queries on the same.
    Reward points if useful.
    Thanks ,
    Surya Pydikondala.

  • Requirement to get Inventory data at the Daily level (non-cumulative KF)

    Hello All,
    Kindly provide ur suggesstions on the issue mentioned below:
    We require the Inventory data at a daily level. Also we require that the non-cumulatve Key Figures such as 0TOTALSTOCK, etc. be available to us in the BW itself, since this is required for further processing.
    PS: Right now we are using RSCRM_BAPI to execute the qurey and store the data into a table, but it fails for non-cumulative keyfigures. Kindly suggest if ther are other ways which can suffice the requirement mentioned above.
    Thank you.
    Regards,
    Kunal Gandhi

    Another one?
    You should read this link: https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement

  • Credit Memo Request for New Sales Organisation

    Hi Frnds
    I have a requirement in which i need to create a Credit Memo Request for the newly created sales organisation using the old billing document number created for old sales organisation.Please kindly help me in this regard.
    Thanks in Advace
    Sowmmya B

    Hi,
    Did you try creating a CMR online ??
    Regards

  • Letter of Credit in Sales return process/

    Hi All,
    This issue is related to Letter of Credit, I created a  sales order and maintained Financial document in Billing Tab (Letter of Credit) & saved the sales order and the balance of LOC is updated, i created Delivery  &  Invoice also . Later stage the customer returned the materials and we Created the return sales order but the letter of Credit open value is not increasing or not Crediting.
    Please let us know in case of return process weather the LOC or Financial document will credit or not?
    Regards

    Hi
    Letter of Credit is used in credit management as one of the tool for Risk management. In case of return process LOC or financial document wont get credited as LOC is for intimation to the customer if the risk level has come to high.Also run the t.code VXDG.
    Please check the below link which may help you
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/SDFTLOC/SDFTLOC.pdf
    Regards
    Srinath

  • Requirement in a Sales report

    Dear Experts,
    I have below requirement in a Sales report.
    The user needs the calender day as in number format. I mean the calender day is in format, 2008:05:11 but he needs it just "5", i.e date should be displayed as just number.
    And in one column I have a percentage of actual sales Vs budget. (%ANT)
    In second user needs the differece between today and next day of the percentage of actual sales vs budget.
    Days        %ANT       (+/-)
    1               3.1           3,4%
    2               6.5           4.0%
    3               10.5         5.1%
    4               15.6         4.7%
    5               20.3
    Please suggest me on this requirement. Any help would be rewarded.
    Thank you,
    Praveen

    The user needs the calender day as in number format. I mean the calender day is in format, 2008:05:11 but he needs it just "5", i.e date should be displayed as just number.
    I think to achevie this you could make a Formula Variable -- Replacement Path -- get values from the date info object.
    You would need to edit this to show only date in the user exit for variables and reporting.
    In second user needs the differece between today and next day of the percentage of actual sales vs budget.
    For this you could make two RKF one with current day restraction and the other with current day -1. Keep the restriction as "Constant Selection".
    Add one more column with difference between two.
    Hope this helps!!
    VJ

  • Stature of sales organisation?

    Stature of sales organisation?

    The Sales and Distribution module uses some organizational units that can only represent sales and distribution processes, such as sales organization, distribution channel, division or shipping point. Other organizational units, such as company code or plant, are used in Sales and Distribution and in other modules in the R/3 System.
    <b>Sales Organization:</b>
    --> The sales organization is an organizational unit in Logistics which groups the enterprise according to the requirements of sales and distribution. A sales organization is responsible for distributing goods and services. Therefore, it is also liable for the sold products and responsible for the customers' rights of recourse.
    --> The sales organization is also used to take, for example, a regional, national or international subdivision of the market into account.
    --> A sales organization is uniquely assigned to a company code. More than one sales organization can be assigned to a company code. If you use the Sales and Distribution module, you need at least one sales organization.
    --> You maintain your own master data for a sales organization. In the sales statistics, the sales organization is the highest summation level.  All items in a sales and distribution document, that is, all items of an order, an outbound delivery or a billing document, belong to a sales organization.
    Regards,
    Rajesh Banka
    Reward points if helpful

  • Where we can see requirement type in sales order.

    Hi
    Where we can see requirement type in sales order ?
    Can we change the requirement type in sales order.
    Thanks,
    KP

    Hi
    1.You can see requirement type in sales order in the Procurement tab.
    2.Yes you can change the requirement type in sales order in the same field.
    Regards
    Vamsi

  • Changing Sales Organisation for Materail

    Hi,
    What is the t-code to change the Sales Organisation for the material
    Regards
    Smitha

    In MM02, enter the material for which you want to change the sales org. Select the view "External objects" and once you are there, click on "Organizational Levels" button (just beside the additional data button on the top). There you have the option of changing the sales org.

  • Sales Organisation / Plant

    Gurus,
    Question:
    Where the sales Organisation and the plant in a document is assigned to two different companies you must immediately know that the result will be an inter-company transaction
    True / False
    Please inform your commnets.
    Regards,
    Ashish

    Ashish,
    Yes, The Answer is True...... Because Sales organization is an entity which takes order and finalize the deal, and it belong a company code. And the plant assigned to that company code and distrinution chain only can supply......
    But if the plant belongs to CCode A, and Sales Org belong to CCode B.... Then its for sure its intercompany process.
    Thanks,
    Raja

  • Sales Org to the User

    Hello Everyone
    I would like to know how I get the Sales Org to a User.
    At the moment I get with the FM CRM_ORGMAN_DIR_ASSIGNMENTS_GET the Org Unit.
    Is there a way to get the Sales Organisation with the Org Unit or the get right away the
    Sales Org with the Username?
    Many thanks,
    Isabel

    Hi,
    I copied these lines from CL_ACO_HR_OBJECT->READ_ORG_UNITS_FOR_USER()
        CALL FUNCTION 'RH_STRUC_GET'
          EXPORTING
            act_otype        = 'BP'
            act_objid        = lv_bupa_number
            act_wegid        = lv_evaluation_path
            authority_check  = space
            text_buffer_fill = 'X'
          TABLES
            result_objec     = rt_result_objec
          EXCEPTIONS
            no_plvar_found   = 1
            no_entry_found   = 2
            OTHERS           = 3.
      ENDIF.
    * get org. unit for user
      CALL FUNCTION 'RH_STRUC_GET'
        EXPORTING
          act_otype        = 'US'
          act_objid        = iv_user_id
          act_wegid        = lv_evaluation_path
          authority_check  = space
          text_buffer_fill = 'X'
        TABLES
          result_objec     = lt_result_objec
        EXCEPTIONS
          no_plvar_found   = 1
          no_entry_found   = 2
          OTHERS           = 3.
    First one gets org unit by business partner, second by user. RH_STRUC_GET can do nearly everything.
    cheers Carsten

  • How to get  sales order data in R/3. Any FM?

    Hi ,
    Is there any FM in R/3 to get sales order data.
    In CRM we use CRM_ORDER_READ to get the Header and Item details. Like wise FM in R/3 is required.
    Actually I have to test 'Usage' in sales tab of VA01/VA02/VA03.
    How to get the order details? what is the user exit for ORDER save?
    If any body knows please do let me know.
    Thanks and Regards
    Harish

    Hello Harish,
    Please use BAPI_BUSPROCESSND_GETDETAILMUL to read details of sales order. This works as a remote enabled counterpart of CRM_ORDER_READ.
    Similarly if you want to display sales order from R/3, use FM BAPI_BUSPROCESSND_DISPLAY.
    Regards
    Kaushal

  • How to get the sales value of the last month in the quarter

    Hi,
    We have a requirement to get the "Sales" value against a quarter. We have 2 tables "Time" and "Sales". We want to display the Sales value against each quarter.
    But this should happen as follows.
    Consider quarter Q1 it should display the value of 3rd month, Q2 should display value for 6th month and so on..
    If in any particular Quarter we dont have a value for last month then it should display the value for 2nd month, if 2nd month value is also not present then it should display 1st month sales value.
    We are using excel as the database.
    Please let us know if anybody has a resolution to this.
    Regards,
    Apoorv Chitre

    hi,make an other column which will be the flag for the last months you want to be displayed...
    so ,in reports,you pass it as hidden column(by filter only the ones which have the appropriate flag),and then voila...
    i hope i helped
    http://greekoraclebi.blogspot.com/
    ///////////////////////////////////////

  • Requirement is getting generated multiple times on Running the MRP

    Dear All,
    I am attaching one Fert material to my project and generating reservation for this.while running the MRP through Tcode MD01,planned order is getting created and later on converted to production order.After confirmation of production order,the material comes to project stock from where it is getting dispatched against a sales order.Once the dispatch takes place,and when the MRP is run again,the system generates one more planned order.
    I am using the strategy 21 in the material master.
    One option I think is to check the final issue check box in the materials assigned to the activities but the no of materials are huge and the project guy is not knowing the status of dispatched materials.
    Please let me know what could be the possible reason for this and what is the possible solution for this.
    Regards,
    B P Singh

    Hi
    In our case we are doing delivery from sales only for a similar requirement and the only option was to set the FI indicator against the network reservation.
    Is there any other method that would stop new requirements generation in MRP for those items which are picked up from sales and delivered from project stock.
    Project based delivery offcourse answers it, but is there any other settings for deliveries from sales.
    PS: Status TECO can also be set to the Network reservation only if all the materials are delivered.
    regards
    Srikrishna

Maybe you are looking for