FI, GL datasources support delta only once in a day

Hi All,
Please tell me in BW these FI,GL datasources like...(0FI_GL_4, 0FI_AP_4, 0FI_AR_4)supports delta only once in a day??/ ...
Please tell me why delta load possible one time only in a day??/.
Regards,
Venkatesh.

Hi ,
For general -Ledger data source, the delta process uses a lower interval setting of one hour (this is the default setting).Ok so after every hour the delta come. In this way, the system always transfers all postings made between one hour before the last delta upload and the current time.
Please folow the below link for more details :
http://help.sap.com/saphelp_nw70/helpdata/EN/45/757140723d990ae10000000a155106/content.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/e8/747140723d990ae10000000a155106/frameset.htm
Thanks,
Deepak

Similar Messages

Password self-service errors - Password can be changed only once in a day

Hi experts,
We've been using password resets without issues for several months. Recently we upgraded from version 5.3 SP12 to SP14.
I've read the CUP release note that explains that how password resets now validates against the ABAP system parameter for login/password_change_waittime.
The errors we are experiencing happen even when the users' password is reset for the first time in a day.
Error message:
X Unable to reset password in the following system(s): ECDCLNT100. Password can be changed only once in a day
Please advise if you have experienced this error, if there is a resolution, and/or if there is a way to disable the parameter check.
FYI - We are only using password resets in our non-production systems and are not concerned with multiple daily password resets.
Thanks.

Hello
Are you using PSS with a CUA system?
Then you can try to upgrade the CUA to virsanh sp16.
or maybe this note: 1552707
KSM

Trigger Process chains only once in a day

Hi All,
I have a requirement where a process chain triggers on arrival of some files.Now I want this chain to trigger only once in a day even if file arrives before the start of next day.How can i acheive this.
Reagrds,
Raj

Hi,
Please use below:
REPORT ZCHECKPCNEW.
TABLES : RSPCLOGCHAIN.
DATA : IT_TAB TYPE TABLE OF RSPCLOGCHAIN,
WA_TAB TYPE RSPCLOGCHAIN.
FIELD-SYMBOLS <FS> LIKE LINE OF IT_TAB.
PARAMETERS :LV_CHAIN TYPE RSPCLOGCHAIN-CHAIN_ID.
SELECT * FROM RSPCLOGCHAIN INTO TABLE IT_TAB
WHERE CHAIN_ID = LV_CHAIN
AND DATUM = SY-DATUM.
SORT IT_TAB DESCENDING BY DATUM ZEIT.
READ TABLE IT_TAB INDEX 1 ASSIGNING <FS>.
IF SY-SUBRC = 0.
IF <FS>-ZEIT < SY-UZEIT.
MESSAGE E000(SABAPDOCU) WITH 'Error'.
ELSE.
MESSAGE I162(00) WITH 'Successful'.
ENDIF.
ELSE.
MESSAGE I162(00) WITH 'Successful'.
ENDIF.
-Vikram

Only Once in A day

Can anbody help me to write the code for following task
i have to create a program Zabc which can be run only once in a day
if you run Zabc second time you should get message that you can run this program only once in a day
very urgent

hi
good
if you are running the program manually than it is not possible to fulfill your requirement, yes if you r scheduling the job once in a day than it will run once in a day but if someone run the same report manually than you cant do anything, or if anybody from different id try to schedule the job second time in a same day than you might dispaly a error message, for that you can refer the table TBTCS which will help you to give the details of the user who has again schedule the job int he same day and by giving a condition you can display a message for the user other than your username.
thanks
mrutyun^

0crm_mktattr_attr - delta only once per day possible?

Hi all,
we want to use delta functionality for 0crm_mktattr_attr. The problem is, that only once a day the delta for a business partner is beeing transfered to the bw. If you have done another change on the same business partner, no delta is being generated (neither that day nor the next day - so this change is lost). If we change another business partner, a new delta is created (if the business partner was not changed before the first delta. Is there any other setting we have to do to transfer get each change?
We're using CRM 7.01 SP07, BW 7.0. 0crm_mktattr_attr is already set to Delta-method AIE, changepointers (general) are activated and changepointers for message type RS0026 are also activated.
Regards,
Florian

Hi Florian,
Any solution for this problem?
I also need to load data 0CRM_MKTATTR_ATTR and I´m not sure which change pointer I have to activate. For the INITIAL data load into SAP CRM, we deactivate the Change Pointer RS0027 as SAP oriented.
If I set it back, will this Datasource be Delta enabled?
Thanks
Fábio

Abap report need to run only once in a day

can i restrict my abap report that it should run once in a day. is there any authorization funda? or any sap provided concept? how can i approach this?

hi,
no authorizations for tht if u want try this code i think it will help u
DATA:count,date LIKE sy-datum.
GET PARAMETER ID 'MAX' field count.
GET PARAMETER ID 'DAT' FIELD date.
IF date is initial.
date = sy-datum.
ENDIF.
IF date = sy-datum.
count = count + 1.
else.
message e000(zmsgtab)."u con't execute it more than once in a day.
endif.
set PARAMETER ID 'MAX' field count.
IF count > 5.
count = 0.
set PARAMETER ID 'MAX' field count.
date = date + 1.
set PARAMETER ID 'DAT' field date.
message e000(zmsgtab)."u con't execute it more than once in a day.
ENDIF.
write:/ 'this is my program'.
<removed_by_moderator>
<removed_by_moderator>
feel free to ask any quiries
<removed_by_moderator>
<removed_by_moderator>

Delta get once and delta request wise?

hi friends,
what scenerio we use delta get once and delta by request at DTP in BI 7.0? i studied many threads, i didnt understand , get delta once some snapshot like? what is the meaning?
can u give me any example , its great?
regards
ss

Indicator: Only Get Delta Once
Source requests of a DTP for which this indicator is set are only transferred once, even if the DTP request is deleted in the target.
Use
If this indicator is set for a delta DTP, a snapshot scenario is built.
A scenario of this type may be required if you always want an InfoProvider to contain the most up-to-date dataset for a query but the DataSource on which it is based cannot deliver a delta (new, changed or deleted data records) for technical reasons. For this type of DataSource, the current dataset for the required selection can only be transferred using a 'full update'.
In this case, a DataStore object cannot usually be used to determine the missing delta information (overwrite and creation of delta). If this is not logically possible because, for example, data is deleted in the source without delivering reverse records, you can set this indicator and perform a snapshot scenario. Only the most up-to-date request for the DataSource is retained in the InfoProvider. Earlier requests for the DataSource are deleted from the (target) InfoProvider before a new one is requested (this is done by a process in a process chain, for example). They are not transferred again during the DTP delta process. When the system determines the delta when a new DTP is generated, these earlier (source) requests are seen as 'already fetched'.
Setting this indicator ensures that the content of the InfoProvider is an exact representation of the source data.
Dependencies
Requests that need to be fetched appear with this indicator in the where-used list of the PSA request, even is they have been deleted. Instead of a traffic light you have a delete indicator.
Get Data by Request
This indicator belongs to a DTP that gets data from a DataSource or InfoPackage in delta mode.
Use
If you set this indicator, a DTP request only gets data from an individual request in the source.
This is necessary, for example, if the dataset in the source is too large to be transferred to the target in a single request.
Dependencies
If you set this indicator, note that there is a risk of a backlog: If the source receives new requests faster than the DTP can fetch them, the amount of source requests to be transferred will increase steadily.
Source : https://forums.sdn.sap.com/click.jspa?searchID=5462958&messageID=3895665
Re: Diff between Only Get Delts Once and Get Data by Request
Check this blog as well : /people/community.user/blog/2007/06/21/sap-netweaver-70-bi-data-transfer-process-with-147only-get-delta-once148

I am having an issue where whenever I am at the document list and do edit, to copy or delete a document the iPad locks up. Happens for both pages and numbers. Also happens on my iPhone, but only once in a while. Help.

I am having an issue with both Pages and Numbers on my iPad. Whenever I am at the document list page and use "edit" to make a copy of a document or delete it, the iPad locks up. Happens almost every time. Also happens on my iPhone but only once in a while. Thought of completely redoing the iPad, but if it happens on the phone as well, won't help. ???

Hello APVzW, we absolutely want the best path to resolution. My apologies for multiple attempts of replacing the device. We'd like to verify the order information and see if we can locate the tracking number. Please send a direct message with the order number so we can dive deeper. Here's steps to send a direct message: http://vz.to/1b8XnPy We look forward to hearing from you soon.
WiltonA_VZW
VZW Support
Follow us on twitter @VZWSupport

Need to populate value for a KF only once for a combination of characterist

Hello All,
We had a requirement for a report. wherein we need to consolidate the data of the 0FI_GL_4 datasource and a custom table.
both these sources have only 4 fields in common i.e Fiscal Year/Period; Company Code and Pool
in the custom table, for each fiscal yr/period & Pool combination, there is a unique Plan value available.
To consolidate the data, I wrote a routine in the transformation to extract data from the custom table based n the combination of Fisc yr Period, Comp Code & Pool.
However, since 0FI_GL_4 has more than 1 entry for the above mentioned combination that is GL_accounts, document number, etc; during extraction, my plan value is being extracted multiple times to the cube and hence for a fiscal yr/period, cube shows a summation value.
I want the plan value to be picked only once.. please advice

Hi Sneha,
As I understand in your infocube along with the primary key of custom table one more field exists e.g. Document number and due to which the value is getting repeated over multiple lines.
Though all these records are valid but when you are running report on this cube without document number all the plan values are getting aggregated, again this behaviour is also correct.
For your reporting purpost I feel that you need to extract data from the custom table in other data target and then do the reporting on that, wherein the plan value will not be repeated.
Regards,
Durgesh.

When i type the https URL in my FireFox browser version 3.6 to 5.0, i get login pop up window two times. But in IE browser i get only once. Please tell me why FireFox is showing pop up screen two times to enter my uid/pwd. Thanks!

We have our company internal application which is protected by SiteMinder. When we type https://appname.domain.com in IE i get popup window asking me to enter uid/pwd and works fine. However same URL when i login in FireFox, i get pop up window two times. So i wonder why FF is asking two times instead of just only once.
Thanks for your help.

Do you have that problem when running in the Firefox SafeMode?
[http://support.mozilla.com/en-US/kb/Safe+Mode]
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this:
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

PS10 Elements does not open in Windows 8, or opens only once. Can it be fixed?

PS Elements 10 preinstalled on my new computer with Windows 8. It worked fine for a week, now opens once, then won't open again, or doesn't open at all. Adobe gives no support to fix this (they told me to research the answer on their site), yet their info says PS 10 and Windows 8 are compatible. Automatic troubleshooter gives non-compatibility message. Can this be fixed? Have spent many hours trying to figure this out. Uninstalled and reinstalled. Nothing works so far.

Thank you for your help. I tried ctrl-alt-shift, and it worked a few times, but not every time. After trying your suggested fix, here's what I've since found that works - so far - today.Open Task ManagerClose PS Elements 10Close Task ManagerLaunch PS Elements 10 Please keep in mind that I was closing the program the usual way (from the program) all along. I used an older version of PS Elements for years on my old computer (Windows XP), and never had a problem launching or closing the software. This problem came about on a new computer with PS Elements 10 and Windows 8. No other versions of PS Elements were installed on the new computer, nor were any settings brought over from the old computer. Again, thanks for your input. Will keep your suggestion in mind for any future troubles with Adobe products.
A Digiovanni
Date: Fri, 11 Jan 2013 00:51:43 -0700
From: [email protected]
To: [email protected]
Subject: PS10 Elements does not open in Windows 8, or opens only once. Can it be fixed?
    Re: PS10 Elements does not open in Windows 8, or opens only once. Can it be fixed?
    created by c.pfaffenbichler in Photoshop for Beginners - View the full discussion
Good day! You may want to post on the Photoshop Elements Forum. http://forums.adobe.com/community/photoshop_elements In general trashing the Preferences (by keeping command-alt-shift/ctrl-alt-shift pressed while starting the application) can be helpful with malfunctions in many Adobe applications. Regards, Pfaffenbichler
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4985553#4985553
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4985553#4985553
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4985553#4985553. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Photoshop for Beginners by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

How do I make something happen only once on a true condition in a loop

So I have a way of doing this, but it uses a dreaded local variable, and seems to me that it might be unreliable.
What I want to happen is to have something happen only once on a condition that will remain true. What I need is to set something after a given amount of time, but I only want to set it once after that time has been reached. Problem is, if I use a range, it could be true more than once, if I use a greater than, it'll be true every time after the set time, and if I use an equal, there's no way to know that the particular millisecond value will even appear in the loop.
Maybe I'm wrong in even using those comparison functions... Any ideas would be greatly appreciated. See the attached vi for a better look at what I'm trying to do... (v7.0)
Thanks,
Geoff
Attachments:
Question.vi ‏16 KB

The "Idle" state that the help file refers to is the "non-running"
state. The Top Level VI must end execution before any "First Time" VIs will
return TRUE after being called initially.
Therefore, if your application calls a subVI at the beginning of the
Test portion, on the next iteration of the loop it will return FALSE
from that subVI, since your main VI never stopped running, and received
a TRUE from the "First Time" on the initial test loop.
If you have code that you want to execute only on the first run of your
entire program, "First Time" should work fine. If you have code that
you only want to execute on the first iteration of just the Test loop,
the "First Time" VI is not ideal.
I think that shift registers are going to provide the best solution,
however you mentioned that for your particular application that is not
ideal. Could you describe a little bit more why shift registers are
problematic?
Thanks Geoff, let us know.
DWeiland
Applications Engineer
National Instruments
www.ni.com/support
Dan Weiland

How to extract data using DSources which do not support Delta

Hi forum,
Iam using a data source which does not support delta. In such a scenario what should i do For subsequent extractions.Will i have to opt for full load every time, if so then how will the double data records be treated. Pls help me out of this situation. In RSA6 if i click on the data source there i can find a check box for enabling delta , but again that is greyed out. If i want to change that what steps should i follow.
All the helpfull answers and solutions would be thanked by assigning full points.
Regards
Pallavi

Can you give me the data source name please.
If it is a standard Business Content Datasource and it does not support delta(or delta is not enabled) then you dont have any choice to modify the standard Datasources. In such cases you can create a Generic DS same as Standard DS and enable delta.
Hope this helps.
Praveen

CUP - field mapping from request to SU01 for Accnt No worked only once

CUP - field mapping from request to SU01 worked only once. I configured the Field Mapping for Account Number with Account Id. First request worked fine in DEV systems, 2nd and 3rd requests failed. Same thing happened in QA systems. Not sure whether the difference in SP on GRC and ECC is causing this. Any help is greatly appreciated.
We are currentky on GRC 5.3 ABAP stack SP 14.0
and
ECC - SAPK-53315INVIRSANH VIRSANH 530_700: Support Package 0015
Any help is greatly appreciated.
Thanks,
Vish

Hi Diego,
Yes, we are on VIRSANH SP15 also VIRSAHR SP13 for SAP_HR . My connector type is SAP HR System, Version ECC 6.0.
We are on GRC 5.3 Support Pack 14.0 . Our GRC 5.3 installation is running on ABAP stack.
It is very strange that in QA client, SU01 got updated atleast 3 times with new account number , user group. Tried 4th time, did not work. In DEV client, it worked only once.
Thanks,
Vish

(BW) Run the Start Routine Only Once

I understand that for every data package from ODS to Cube, the start routine is run. But I need to run it only once. Is there anyway to achieve this in ABAP?

I once had that same requirement, but in a datasource in R3. I'm not sure if the same solution would work in BW, though. I used a memory id to keep the variable value between packets:
DATA: ... n_globalvar TYPE n ...
then I added...
IMPORT n_globalvar FROM MEMORY ID 'ZMEMID01'.
...at the start of the routine to retrieve to the variable the value from the memory id.
At the end of the code, I exported the variable back to the same memory id...
EXPORT n_globalvar to MEMORY ID 'ZMEMID01'.

FI, GL datasources support delta only once in a day

Similar Messages

Maybe you are looking for