Fibre to Portland but not to Weymouth?

Now maybe its just me but how can this be viable!
Portland is scheduled for Fibre and this is the exchange that will be upgraded:-
Exchange name:Exchange code:Locationostcode:Mapserves (approx):
Portland
STPORTL
Dorset South West
DT52EN
Our map | Multimap | Streetmap
5,444 residential premises
261 non-residential premises.
What I do not get is that in order to get to Portland you have to go through Weymouth (Portland is basically an Island with 1 road joining it)
The Weymouth exchange has alot more residence and surely wouldnt it be more viable to do them both?
Exchange name:Exchange code:Locationostcode:Mapserves (approx):
Weymouth
STWEYMH
Dorset South West
DT48AE
Our map | Multimap | Streetmap
19,554 residential premises
1,287 non-residential premises.
On checking out various rollouts from Openreach there is no mention of Weymouth.
If we were to use the Infinity broadband package that comes with 40Gb limit (£18 per month) and even if we were conversvative and used 60% of connected residences :-
Portland :- 60% of residences is 3266 times that by £18 per month yields a c£58k per month
Yearly = c£696k
Weymouth :- 60% of Residences is 11732 times that by £18 per month yields a c£211k per month
Yearly = c£2.5 Million
Now I realise this does not take into account costs etc from implementing such installations such as this, but surely if you are going to feed fibre to a remote Island such as Portland! you would think to maximise benefits from your installion costs!

Just had an interesting Email from Dorset County Council with regards to my email I sent to them asking why.
Dear Mr Parsons,
Thank you for contacting Dorset County Council.
The best contact at Dorset County Council for this type of enquiry is xxxxx xxxxxx ([email protected]) I had a brief chat with xxxxx who explained that the exchanges at Dorchester and Weymouth had been updated recently although not to 'fibre' standard as I understand it. Due to the amount of technology involved during the broadcasting of the sailing at Portland it was decided that the exchange would have to be brought up to 'fibre standards.' If you wish to clarify this then it may be worth contacting xxxxx on the email address above to clarify.
For future reference, you can find this and a variety of other information on our website www.dorsetforyou.com
If there is anything further we can do for you, please do not hesitate to contact us and one of my team will be happy to help with your enquiry.
Thank you.
Please note, this is an email sent from Dorset Direct; should you require further information, or need to raise any concerns, please address your response to [email protected]
Yours sincerely
Dorset Direct
Customer Contact Centre
On behalf of Dorset County Council
01305 221 000
I have also recieved this email below from BT Openreach:-
Dear Mr Parsons
Thank you for your email
Knowing your area well I understand the point being made. I have no additional information at this time although I understand that there will be further announcements on additional locations during September. Please keep an eye on the fibre rollout webpage around that time :-
Many thanks
Dear Mr Parsons
Thank you for your email
Knowing your area well I understand the point being made. I have no additional information at this time although I understand that there will be further announcements on additional locations during September. Please keep an eye on the fibre rollout webpage around that time :-
http://www.openreach-communications.co.uk/superfast/faq.htm
Many thanks
Heres is a screenshot of Portland and Weymouth, I have pointed out where the 2 exchanges are.
They speak of recent upgrades to Weymouth & Dorchester exchanges ie recent meant 2005/2006 upgrades.

Similar Messages

I have a time capsule connected directly to fiber connection. I have connected a windows server directly to TC and configured it for remote desktop connection. From my interanet I can access srvr but not from my home. What config I need on TC?

I have a time capsule directly connected to fibre optic point out. All pcs and macs are connected wirelessly to the internet. I have connected a windows server pc to TC. When configured for Remote desktop connection, I can access windows server from within interanet but don't know how to access it from internet. I guess I need to change some settings in TC to get some ip adress for the remote desktop connection from my home. Anyone who can help me out? Appreciate it.
Narmin

I am a little lost now.. I have read again your title and your first post.. and they seem inconsistent.
In the title you state.
From my interanet I can access srvr but not from my home.
Interanet is not a word I know.. I assumed intranet...are you talking about internet or intranet? And just to be clear say WAN or LAN.. !! Is your home part of the interanet??
In the first post you state,
I can access windows server from within interanet but don't know how to access it from internet.
Now this is more normal.. the issue is not in the home at all, it is accessible from there but fails from internet. If this is correct, then you can do a few obvious things to determine where the problem is.
But first I need to know are you actually testing from a different internet connection to your home lan.. you are not just trying the public IP from inside the LAN as that will fail due to the TC not doing NAT Loopback.
I am also assuming the TC is the only router in the network, and has the public IP on the WAN interface.
And I am also assuming you have turned on the ping responder and you can actually ping your public ip from the internet and get a response. This helps no end in figuring out where there are issues. Strange but I have no idea if there is a ping responder in the TC WAN so you might need to forward that as well. Also if you have a dynamic public ip address are you using dyndns or no-ip or some other service to connect.
1. Test bypassing the TC.. plug the internet connection straight into the windows server,, and test if you have access. If yes, the TC is the problem.. if not, your setup on the windows server is wrong.. look at firewall in particular.
2. Assuming from test 1 the TC is the problem, Post the screen shots of the port forwarding setup for us to look at.. that is by far the easiest way to check it out.
There are lots of references to port forwarding in the TC.. eg
http://must-know-mac.blogspot.com/2008/07/how-to-port-forward-time-capsule.html
The things that generally go wrong are firewall on the computer that is accepting the port.
The ISP doesn't allow connections on a particular port. (not likely in your case)
The router is behind another router.. double NAT will kill any port forward.
Upnp has already allocated a port.. not an issue as TC doesn't use upnp although a reboot of everything after you set port forwards is well worth it.. amazing how things don't stick properly without a reboot.
IP on the receiving device is not static and so changes.
Not enough or right type of ports are opened. This is always messier than it looks as one port is often not enough for two way communications.

My exchange is enabled for BTInfinity, but not ava...

Hi
My exhange (Oadby) is already enabled for BT Infinity - but not available on my line until Dec 31st.
A few months ago the checker said it would be available by 31st Sept !
I've looked at the reasons given here http://community.bt.com/t5/BT-Infinity/BT-Infinity-has-reached-my-area-but-the-line-checker-says-I-c...
How do I find out if I will eventually get connected (or not) ?
thanks

Toekneem beat me to it again....
In the thread below message #4 there is a picture of a typical Fibre cabinet sitting next to it's older little brother
http://community.bt.com/t5/BT-Infinity/How-can-I-find-my-cabinet-number-and-when-it-will-be-enabled/...
Edit there are a few varieties of fibre cabinets with some smaller, but the thing to look out for are cooling grills which as Toekneem mentioned if the cabinet is powered up you can easily hear the fans running.
And if so then your nearly set for Infinity and beyond!!!
Please Click On any Text in Blue as that automatically links to information.
PC (NDEGR)

Infinity available on my Exchange but not on my st...

Just wondering if someone can explain what's going on here. I'm on the Haslington exchange, which has now been enabled. There are 3 cabinets all within 800m of my house that have been upgraded, and have whirring equipment in them so they would all appear to be active. I know which cabinet I am on as a recently retired Openreach engineer lives on the next street along, and has told me which one my line is connected to which is one that is ~650m from my house. It's also the same one he is on and the tracker will allow him to order at 37 meg, he is a little closer to the cabinet than me.
I've been checking the BT Infinity checker for a while and it's always said 'Infinity is not due to be rolled out in your area' under my phone number. A while back I was able to search by post code, and it said something like 'Good news, Infinity is coming to your area' but I can't seem to find that link anymore?
Now as I know the cabinet I was on was upgraded a few months ago I called BT last month who checked, and told me there was an error in the tracker and that I would definitely be able to order Infinity at my house and that the current enablement date was 31 March though this was subject to change.
I've just learned that some of my neighbours in surrounding streets have been able to order Infinity, and have estimated download speeds of 30-40 meg, so today I called BT and asked if I could order.
I was first of all told that Infinity is not available in my area and my exchange probably has not been enabled. I questioned this as I know I am on the Haslington exchange, I was then told that I can't be on the Haslington exchange. I then politely asked to speak to a supervisor. I was then fogged off again with various excuses from me being directly connected to the exchange (which I am most definitely not) to I was on a different exchange.
I then recapped to this supervisor on what I already knew about my line, he then went away for a few minutes and came back and said that he could get me on a trial, which is part fibre but not at the full speed. He couldn't really explain any more but said his info was showing that I would get download speeds of around 10-12 meg, and up of 4-5 meg.
I've actually gone for this option as I can upgrade to Infinity if and when and I am fed up of ADSL2....my line from the exchange is about 2.5k I believe. But how come people the same distance from the cab as me can order Infinity at 30-40 meg, yet I can only get this 'trial' of 10-12 meg? And exactly what is this trial called? I have tried searching the net but unable to come up with any results???

I live 50m from the nearest cabnet, within a 600m circle there is 6 cabnets. Sad thing is i am not being enabled for infinity, everything around us is being upgraded except our road for some odd reason. I had a chat with an openreach eingineer working on one of the cabnets, he said they finished upgrading the designated cabnets. I asked about my road he had a quick look at my address and said there was no plan for that cabnet. Soo upset...
Just to show you guys how close, the cabnet will be staring me in the face
-Red arrow is me
-Green box with black line is infinity cabnets
-Green line infinity enabled roads
-Black box is the cabnet we are on
-Red no infinity
Looks like my only hope is if for some reason BT decide to deploy FTTP which is highly unlikely. Dont blame BT's choice, upgrade the cabnets with most people. Our cabnet has fraction of the people compared to the other cabnet which has 3 estates connected to it.

Fibre due soon but my line is EO. Am I going to ge...

I am connect to the Tarrington (WNTRR) exchange in Herefordshire.
I live around 0.3 miles from the Exchange but not part of the main residential estate. The village is fairly compact.
When I enter a postcode that is part of the main residential area it says that it is connect to the Cabinet 1 (which is due to be enabled this month I think), however when I type my postcode in I get the message that I am Exchange Only.
Does this mean I am going to be stuck with 8mb? Or do I get ADSL2+ in the meantime? There is practically no information and the Fastershire BDUK website is pretty much useless.
I wish there was more transparency about what was being done.

I get this:
BT BROADBAND AVAILABILITY CHECKER
Telephone Number (Removed by Mod) on Exchange TARRINGTON
Featured Products
Downstream Line Rate(Mbps)
Upstream Line Rate(Mbps)
Downstream Range(Mbps)
Availability Date
ADSL Max Up to 8 -- 7 to 8 Available
Fixed Rate 2 -- -- Available
For all ADSL and WBC Fibre to the Cabinet (FTTC) services, the stable line rate will be determined during the first 10 days of service usage.
Throughput/download speeds will be less than line rates and can be affected by a number of factors within and external to BT's network, Communication Providers' networks and within customer premises.
The Stop Sale date for Datastream is from 30-Jun-2012; the Formal Retirement date for Datastream is from 30-Jun-2014.
If the End User wishes to migrate from their current Broadband supplier they will need to contact them in the first instance to obtain a MAC (Migrations Authorisation) Code, and then contact their new Broadband supplier to arrange for the service to be migrated.
Note: Please note that postcode and address check results are indicative only. Most accurate results can be obtained from a telephone number check.
Thank you for your interest.

Can you check for data in one table or another but not both in one query?

I have a situation where I need to link two tables together but the data may be in another (archive) table or different records are in both but I want the latest record from either table:
ACCOUNT
AccountID Name
123 John Doe
124 Jane Donaldson
125 Harold Douglas
MARKETER_ACCOUNT
Key AccountID Marketer StartDate EndDate
1001 123 10526 8/3/2008 9/27/2009
1017 123 10987 9/28/2009 12/31/4712 (high date ~ which means currently with this marketer)
1023 124 10541 12/03/2010 12/31/4712
ARCHIVE
Key AccountID Marketer StartDate EndDate
1015 124 10526 8/3/2008 12/02/2010
1033 125 10987 01/01/2011 01/31/2012
So my query needs to return the following:
123 John Doe 10526 8/3/2008 9/27/2009
124 Jane Donaldson 10541 12/03/2010 12/31/4712 (this is the later of the two records for this account between archive and marketer_account tables)
125 Harold Douglas 10987 01/01/2011 01/31/2012 (he is only in archive, so get this record)
I'm unsure how to proceed in one query. Note that I am reading in possibly multiple accounts at a time and returning a collection back to .net
open CURSOR_ACCT
 select AccountID
 from
 ACCOUNT A,
 MARKETER_ACCOUNT M,
 ARCHIVE R
 where A.AccountID = nvl((select max(M.EndDate) from Marketer_account M2
 where M2.AccountID = A.AccountID),
 (select max(R.EndDate) from Archive R2
 where R2.AccountID = A.AccountID)
 and upper(A.Name) like parameter || '%'
<can you do a NVL like this? probably not... I want to be able to get the MAX record for that account off the MarketerACcount table OR the max record for that account off the Archive table, but not both>
(parameter could be "DO", so I return all names starting with DO...)

if I understand your description I would assume that for John Dow we would expect the second row from marketer_account ("high date ~ which means currently with this marketer"). Here is a solution with analytic functions:
drop table account;
drop table marketer_account;
drop table marketer_account_archive;
create table account (
 id number
, name varchar2(20)
insert into account values (123, 'John Doe');
insert into account values (124, 'Jane Donaldson');
insert into account values (125, 'Harold Douglas');
create table marketer_account (
 key number
, AccountId number
, MktKey number
, FromDt date
, ToDate date
insert into marketer_account values (1001, 123, 10526, to_date('03.08.2008', 'dd.mm.yyyy'), to_date('27.09.2009', 'dd.mm.yyyy'));
insert into marketer_account values (1017, 123, 10987, to_date('28.09.2009', 'dd.mm.yyyy'), to_date('31.12.4712', 'dd.mm.yyyy'));
insert into marketer_account values (1023, 124, 10541, to_date('03.12.2010', 'dd.mm.yyyy'), to_date('31.12.4712', 'dd.mm.yyyy'));
create table marketer_account_archive (
 key number
, AccountId number
, MktKey number
, FromDt date
, ToDate date
insert into marketer_account_archive values (1015, 124, 10526, to_date('03.08.2008', 'dd.mm.yyyy'), to_date('02.12.2010', 'dd.mm.yyyy'));
insert into marketer_account_archive values (1033, 125, 10987, to_date('01.01.2011', 'dd.mm.yyyy'), to_date('31.01.2012', 'dd.mm.yyyy'));
select key, AccountId, MktKey, FromDt, ToDate
 , max(FromDt) over(partition by AccountId) max_FromDt
from marketer_account
union all
select key, AccountId, MktKey, FromDt, ToDate
 , max(FromDt) over(partition by AccountId) max_FromDt
from marketer_account_archive;
with
basedata as (
select key, AccountId, MktKey, FromDt, ToDate
from marketer_account
union all
select key, AccountId, MktKey, FromDt, ToDate
from marketer_account_archive
basedata_with_max_intervals as (
select key, AccountId, MktKey, FromDt, ToDate
 , row_number() over(partition by AccountId order by FromDt desc) FromDt_Rank
from basedata
filtered_basedata as (
select key, AccountId, MktKey, FromDt, ToDate from basedata_with_max_intervals where FromDt_Rank = 1
select a.id
 , a.name
 , b.MktKey
 , b.FromDt
 , b.ToDate
from account a
join filtered_basedata b
 on (a.id = b.AccountId)
ID NAME MKTKEY FROMDT TODATE
123 John Doe 10987 28.09.2009 31.12.4712
124 Jane Donaldson 10541 03.12.2010 31.12.4712
125 Harold Douglas 10987 01.01.2011 31.01.2012
If your tables are big it could be necessary to do the filtering (according to your condition) in an early step (the first CTE).
Regards
Martin

HT1386 I have synced the items from itunes to an iphone 4 without problem, except the two albums I just purchased did not sync. They show up on the itunes on my desktop and on my ipod, but not on the new iphone. What do I need to do?

I have an itunes account and an ipod, and when I purchased 2 albums on the computer they synced straight to the ipod. I bought an iphone and used the usb cord from the computer to it to sync the itunes albums to the new phone. Everything transfered, and those were albums I had uploaded (not purchased from the itunes store), except the two albmus I just purchased from the itunes store. They appear on my itunes on the computer and ipod, but not on the iphone. What did I fail to do or did I do incorrectly?

This might sound weird, but here's an idea which worked for me re music that was newly added to itunes and showed up in my ipod but wouldn't play - I simply played the tracks in itunes first, just a second of time or so will do it, not the whole track, then connect the ipod and sync again and this time they played - hope this helps.

Sharepoint Foundation - search working for some users (or computers), but not others

Hi all,
We have doozy of a search problem with SharePoint Foundation 2010 that I'm hoping someone can help with.
We have an application that is listening on port 14197 and search is working just fine, but only for one or two users.
If I do a search while logged in using the account we set the application up with then the search works fine and it returns records as expected.
If I use a different account - one that has full control over the app, then the exact same search fails with the following message:
We did not find any results for 06BSL.
Suggestions:
Ensure words are spelled correctly.
Try using synonyms or related searches.
Try broadening your search by searching from a different site.
Additional resources:
Get additional search tips by visiting Search Help
If you cannot find a page that you know exists, contact your administrator.
We've done everything we can think of, including several procedures to create new search accounts, replace databases, etc.
Nothing has helped and all of the info we can find online is in relation to getting search working when it doesn't work at all. In our case it is working, but only for some users. We thought it might have been a permissions issue, but not matter
what permissions we seem to give to test accounts they still don't work. We've set up a test account, for example, that is a member of the 'application owners' group, but cannot produce any search results with it.
The SharePoint Foundation server is running on Windows 2008 Server Foundation, with a separate SBS 2003 DC.
Any help most appreciated.

Hi Alex, thanks for your response and apologies about the late reply - didn't realise someone had responded until now!
Agreed that this looks like a permissions issue, but we're stumped as to what it could be. The 'test' account displays this problem - if we try and search on 06BSL
we get no results, but it does appear that this account has full control over this document (see below).
Note that the 'Manage Permissions' page presents a comment 'This list item inherits permissions from its parent. (Customer QA & Product Management)' which is what we're
expecting.
The indexing schedule is set to 5 minutes.
Appreciate your help with this, as we've spent a huge amount of time on this problem but don't seem to be any closer to a resolution.
Cheers,
Damian
Check permissions result (this result is the same for the list or for the document itself):
Permission levels given to test (DOMAIN\test)
Full Control
Given through the "QA Application Owners" group.
Design, Contribute, Read
Given through the "QA Application Members" group.

Why does GarageBand audio work for guest user but not my account?

Hello, I have a 15-inch MacBook Pro (2.2 GHz Intel Core i7, 4GB 1333 MHz DDR3) from late 2011 that I bought brand new in 2012. I'm running OS X Mavericks 10.9.4 and my MacBook has 500 GB of storage.
About a month or two ago I tried to download the new GarageBand (10.0.2) but I had trouble completing the loops download. The download would stop halfway through because of a network error. So last week I decided to try to download it again, and I was able to do so after reading some discussions about the issue. I successfully completed the download in safety mode and then I restarted my MacBook. At this point I was able to open GarageBand 10.0.2 and create a new project. Unfortunately, there was no audio coming through the output and sound bar for the various audio components in GarageBand. I had no audio when previewing the loops or playing it back in an audio track. I didn't really test anything else out because I figured I needed to fix this problem first. I have read many discussion boards about audio problems with GarageBand. I have already made sure everything is set properly in the GarageBand preferences and the audio preferences in system preferences. I've tried restarting GarageBand and restarting the computer.
This evening I found a discussion from the username icewhatice and they seemed to have had my exact problem. I'm not sure that I found the answer on this discussion though. For reference, this is what icewhatice posted: "I have no audio coming from Garageband 10.0.2. Downloaded it on Saturday and have spent the last two days trying to figure out why it won't work. I'm using a macbook pro with an Alesis QX49. GB registers keyboard when I plug it in but no sound whatsoever, not even from the onscreen keyboard. It seems to read the keyboard as if I play a C chord, it appears in the display. I've done all the obvious stuff like check preferences, restart, I've deleted and downloaded new GB several times and always with same result. Actually, it took me about four attempts to download it in the first place as I was getting an internet connection error message right at the end of the download, and I see others have had that problem. Managed to solve that by downloading in safe mode but now the no sound thing is driving me absolutely crazy because I can't play my keyboard!!!!! Also, worth noting that there is no audio level being read anywhere, I believe in the new version this appears in the volume control at the top. I've also looked into it potentially being a problem with my keyboard and it possibly needing an update but can't find any difinitive answer for that anywhere. I've stopped looking into that because the on screen keyboard doesn't even work - if that worked then I would know at least GB works and it's something to do with the keyboard. So, I am at a complete loss. If anyone has any ideas about why this is happening or what I could do to solve then I would be very grateful."
After reading this, I realized that I am unable to create new tracks, and I realized that I have the same problems with old projects saved from the last version of GarageBand I had. I have not tried to download GarageBand again since it did not work for icewhatice. léonie ended this post by saying: "Something is certainly wrong - either the current project, some settings in your user account, or the downloaded GarageBand version. Or incompatible software may be interfering. If a new project does not work, try to test by logging into a different user account, for example the "Guest User" account. Create a new project using this account. Does GarageBand work better from this account? Then we will need to troubleshoot your preferences."
I have tried this and started a new GarageBand project in the "Guest User" account. GarageBand was working fine in the "Guest User" account and all of the audio was working properly. Does anyone know how I should troubleshoot my preferences?

If an application is working in a different account, but not in your regular account,try t find out, what you configured differently in your own account, for example start-up items or preference panes you are using, applications and other helper tools, that are only installed for your regular account. As a first guess, remove GarageBands preference files from the user library in your Home folder.
But you will have to reset all settings you did in the GarageBand preferences dialog. And GarageBand will not remember the last project. You'll have to find the file manually.
Remove these files from your User Library to a folder on your Desktop:
~/Library/Containers/com.apple.garageband10/
~/Library/Preferences/com.apple.garageband.plist
~/Library/Caches/garageband
Quit GarageBand, then remove the files to a folder on the Desktop and restart the computer, before trying again to open GarageBand.
You user library may still be hidden, as is the default in Mavericks: To open your hidden user library:
Select the "Home" folder icon (the little house) in the Finder's sidebar and press the key combination ⌘J to open the "view options".
Enable "Show Library Folder".
Then open the Home folder and open the Library folder inside and navigate to the Preferences, Caches, or Containers folder. Remove these folders completely - don't leave anything inside: ~/Library/Containers/com.apple.garageband10/,
~/Library/Caches/garageband .

I can't open firefox the running but not responding window opens and says to close the existing window. I can't do that shutting down the computer doesn't do anything to help. I've done all the suggestions here. I've uninstalled and reinstalled firefox

Firefox will not open. I get the firefox is already running but not responding window... I have tried rebooting with no help. I have tried to end the process via cntrl+shift+esc and nothing firefox is listed to end. I have tried find the app data via the run icon in the start up window, I have no run icon on this system (Acer with windows vista(?)
== This happened ==
Every time Firefox opened
== The computer was hard shut down and did a improper shut down scan when it was restarted ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.0; FunWebProducts; GTB6.5; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; .NET CLR 3.5.30729; .NET CLR 3.0.30729)

I am having a similar problem. Running Xp.
Latest revision of firefox.
After using firefox for a while if I exit, parent.lock is locked and i have to reboot to reload firefox.
I have killed all firefox applications from task manager (usually there are none). and I have tried 3 different "file unlock" programs including unlocker to no avail.
I also recently installed a program that shows -all- open files, and parent.lock is not listed, and thus not closable/unlockable from there.

My problem: can't get Google or Facebook to load on Firefox. Something odd. Other pages load, but not those. I go to open: and I get a blank page and tab that says Untitled. Google was my default page. please help me resolve

A few minutes earlier this morning, I couldn't get Firefox to load any pages. I was led to one page from this process and I disabled under Add-ons in Tools I disabled the only thing I found --a Google toolbox. and I went back. Tried again, now i get other pages, but not google or facebook. Help please.

Try clearing your cache
[[Deleting cookies]]
[[How to clear cache]]
Also try running in [[Safe Mode]]
[[Troubleshooting extensions and themes]]

Double-click/Drag-&-drop Photoshop files opens application but not file or I get a message saying that some files in Application Support are missing and I have to reinstall. (Photoshop CS/CS2/CS3)

This is most commonly due to installing Photoshop CS/CS2 before doing an archive and install of Mac OS10.3 or OS10.4. One solution is to reinstall Photoshop 7/CS/CS3 after you have installed Mac OS10.3 or OS 10.4. If you have Photoshop 7 and 8(CS), the easiest way to reinstall Photoshop (without disturbing the original installation) is to install to your desktop. After the install is done just trash the Photoshop folder on the desktop. Note: This will only work with Photoshop 7 and 8(CS) but not with 9 (CS2). Photoshop CS2 you must delete the Photoshop CS2 folder. If you have any 3rd party Plugins or presets remove them from the folder before deleting. Just placing the folder in the trash will not work it must be deleted. After reinstalling CS2 you can now put all 3rd party Plugins and presets back in the new folder. --------------------------- Another solution courtesy Anne Shelbourne Open your Previous System folder. Find "Adobe Unit Types". Copy it into: <Your current system Hard Drive>/Library/ScriptingAdditions/ Then reboot your Mac. --------------------------- However, if you happen to be running a non-English version, like Photoshop CS CE or Photoshop CS ME, it appears the missing file does not get installed. You would need to install and delete the international English version first.

The problem you got into is a known problem after updating to Tiger. It is a small 4K file that gets trashed with the update. It is called the Adobe Unit Types. Both Photoshop and Photoshop Elements need this file to function.
One way to get it back is to reinstall Photoshop, the other is to add this file again.
You can get the file from here http://www.dd.se/Tips/bildbehandling/downloads/AdobeUnitTypes.zip
It is only 3,7 KB big.
You put the file you download here:
[hard disk] /Library/ScriptingAdditions. If you don't have a Scripting Additions folder, you create it.
As you trashed Photoshop, you need to completely deinstall it to be able to reinstall it.

How can I get ALL of my Google Calendars to show on the iCal on my iPhone? I see all of my Google Calendars on the iCal on my Mac, but I do not see them in the iCal on my iPhone. I only see one Google Cal, but not the others.

How can I get ALL of my Google Calendars to show on the iCal on my iPhone?
I see all of my Google Calendars on the iCal on my Mac, but I do not see them in the iCal on my iPhone. I only see one Google Cal, but not the others.

https://www.google.com/calendar/iphoneselect

How do I set upmy Imac to allow using both my computer speakers and a Bose SoundLink system as outputs at the same time. I can use one or the other, but not both.

how do I set up my Imac to allow using both my computer speakers and a Bose SoundLink system as outputs at the same time. I can use one or the other, but not both. From systems Preferences I must select one or the other. I want both to work all the time.

Hi,
I would recommend you to use 0FI_AP_4 rather using both, particularly for many reasons -
1. DS: 0FI_AP_4 replaces DataSource 0FI_AP_3 and still uses the same extraction structure. For more details refer to the OSS note 410797.
2. You can run the 0FI_AP_4 independent of any other FI datasources like 0FI_AR_4 and 0FI_GL_4 or even 0FI_GL_14. For more details refer to the OSS note: 551044.
3. Map the 0FI_AP_4 to DSO: 0FIAP_O03 (or create a Z one as per your requirement).
4. Load the same to a InfoCube (0FIAP_C03).
Hope this helps.
Thanks.
Nazeer

How-do-i-use apple calaendar to-allow-my-staff-and-i-to-share-calendars-but-not-have-my-alarms-going-off-on- their-ihones

how-do-i-use apple calaendar to-allow-my-staff-and-i-to-share-calendars-but-not-have-my-alarms-going-off-on- their-ihones
Really annoying can it be done.?
Searched everywhere for an answer surely other people have had this problem
Cheers

https://discussions.apple.com/message/19818985#19818985

Fibre to Portland but not to Weymouth?

Similar Messages

Maybe you are looking for