BAPI reverse document for JVA company

Hi
I want to use a bapi to reverse documents. I have tried with BAPI_ACC_INVOICE_REV_POST for reversing an invoice receipt. The company use Joint Venture Accounting.
When I run the bapi I get the error: 630 'Reversal in component JVA not possible'. The error is created when the bapi run the JV_DOCUMENT_PREREV function.
Can anyone help me?
Gaute

Similar Messages

Number Range for Logistic Documents For Different Company Codes

Hi all..
I need to numbered the logistic documents for diferent company codes (#60) but the number ranges for al those documents should be generated separately according to each CC.
I've read in other thread that I could use the user exit MM06E003, but it seems that only works for PO. There is also a tweak for GR/GI, but.. any idea for all the other documents?
Thanks in advance.
Guillermo (Willy)

Hi
using the User exit you can change the Numbers Rnage for the LIV Documents based on the Compnay Code
LMR1M003 Number assignment in Logistics Invoice Verification
Thanks & Regards
Kishore

MR8M-Reversal document for cross co code

Hi
I tried to reverse a purchase invoice by using T.code-MR8M.Invoice was posted for cross company code.(say co code1=P430 and co code2 =P435)
For P430 co code-
    31 35218                                                                                5,000.00-
    21 IP435000 (cross company)                                                                                5,000.00
For P435 co code-
    81 55000005                                                5,000.00
    31 IP430000 (cross company)                                                                                5,000.00-
G/L account 55000005 is for co code P435.but when I tried to reverse system through an error message that G/L account 55000005 blocked for P430.
I checked in the system for P430 co code ..yes its block for posting .
My question is why its showing block for co code P430 because its posted for P435 not for P430 and for co code P435,G/L account is already unblock.
Can you please explain the logic.
Thanks
Abhi

Hi Murlidhar,
See the details below and please let me correct if i am lacking on the concept:
There are two co.codes S1 & T0. The salary of S1 needs to be paid from bank a/c of T0. In t code OBYA, i have given the following details:
Co.code 1: S1
debit posting key 40 & account debit is 6 (clearing a/c no. under S1) .Same is done with credit posting key 50 & 6.
Co.code 1: T0
debit posting key 40 & account debit is 11 (clearing a/c no. under T0) .Same is done with credit posting key 50 & 11
Now, in t code FB50, i need to debit salary a/c of S1 & bank a/c of T0. When i click F4 for the options, the co.code is coming supressed on both occassions. though it can work in debit entry as it is for S1 only but on credit entry, i need to change the co.code.
Hope i have explained the situation in very detail & it should give a fair idea about the problem.
Please look into it.
Regards,
Ashok.

Post an InterCo parked document for another Company Code

There are two (2) users with authorizations only to their company codes (CC):
User1 can create/save/delete park/post a doc in CC1.
User2 can create/save/delete park/post a doc in CC2.
User1 can create and park an InterCo doc in CC1/CC2.
User2 can create and park an InterCo doc in CC2/CC1.
<Q1> How can I restrict User1 to post ONLY the parked InterCo doc, but not post any other doc in CC2?
<Q2> How can I restrict User2 to post ONLY the parked InterCo doc, but not post any other doc in CC1?
I have looked into the Auth. Object F_BKPF_BUK, but it doesn't cover me!!!

Hi Kedar, thanks for your reply, again!
That won't work. here is the scenario:
1) UserCC1 will park an InterCo doc with 2 lines (credit to CC1, debit to CC2)
2) UserCC2 should go ahead and post this newly park document
3) UserCC2 should be able to post ONLY the InterCo park documents associate with his/her CC.
4) UserCC2 should NOT be able to post any other doc on any other CC.
Is it clear what the goal is?
I have concluded that in oder to control it, I need an Auth. Object for CC (which I have already) and another Auth. Object that conttols 'Docyment Type'.
Do you know what Auth. Object controls 'Doc.Type'?
Best regards,
Tom

Reverse document for check voided with FCH9

I voided a manual check that was created by using FCH9. I want to be able to reverse the document, but when I tried to reverse, I got an error that the document was already cleared and could not be reversed. Is there a way to reverse the payment document?
Any help would be greatly appreciated!

Hi
If no other new check has been issued for the payment document in FCHN, than you have to use FBRA to reverse the payment document. You should use the option reverse and reset
Regards
Sanil Bhandari

User exit for different Material Document for different company code

Hi,
We want to have different no. range for Material document (GR) for different compnay code. Presently we have no. range at client level. Can we do with any userexit. If so pls. give the details.
Regards
Sai Krishna

[user exit for generating external serial;
[BADI MB_DOCUMENT_BADI;
[user exit or any other enhancements during good receipt;

FBR2 generate reverse posting for a cleared document

Hi,
I am using the transaction FBR2 to generate a reverse document for an existing document. There are several GL accounts in the original document but when i generate the reverse document system could populate lines only for the GL accounts where the original document was not reversed.
Any inputs how to geneate the whole reversal document.
Regards,
Haranadh

Hi
First of all let me know are you trying to Reverse already Reversed Document OR trying to Reverse a Original Document.
If you Reversing the Original Document what ever may be the No. of Line Items, Document will get Reversed. Use FB08 for this.
1. Individual Document Reversal --->FB08
2. Reversal of Reversed Document --->FBR2
3. Reversing a Cleared Document --->FBRA
Regards
Venkat

For Reversal Document Maintainence

Hi
   For SAP NetWeaver BI, we are using the standard data source '0UC_SALES_STATS_01' for Billing Analysis . We are facing one issue regarding this.
The selection creteria for this data source is BUDAT(Posting Date of Invoice Doument) only .
For Example we are extracted the data for the BUDAT = 31.01.2006. In this scenario, assume one Business Partner Number is 1000071173, Consumption is 100 Units and Bill Amount is 500 Rs(INR) for a particular month bill. Now we extract the data from R/3 to BI.After Extraction it will move from R/3 Server to BW Server and it will load into the PSA and then in ODS.
After some days,for some reason we have to reverse the bill and to reissue a corrected bill on the same posting date (i.e.31.01.2006).So for that Business Partner 1000071173,say, Consumpiton is revised to 75 Units and Bill Amount is revised to Rs 375 INR. So the previous Invoice Document is reversed (Full Reversal-Invoice and bill document both) and the new bill has been made for him with 75 units and Bill Amount Rs. 375 INR. When we extract this data again i.e BUDAT 31.01.2006 , we will get the 2 documents one for reversed and one for Corrected. After Extraction from R/3 to BI , In PSA we will get 2 more documents for him. After transfering this two documents into ODS we will get total three documents for that Business Partner for a particular month bill.
Doc 1. Very first time i.e (in the Extraction Date 31.01.2006 with amount Rs 500 INR )
Doc 2. Reverse Document for the Above Doc.
Doc 3. For Corrected Bill.(Invoice document with Rs 375 INR)
In our Business scenario,it is required that we have to display only the recent corrected value in any of the report.So in the time of extraction how can we overwrite or delete the previous records and to keep only the recent corrected value?
Regards
Prashanth

Hi There,
There shouldn't be any overwrite or deletion of previous records in BI. In the R/3 system which is the ISU system, a reversal invoice should carry a negative consumption and bill amount. For your example, after extraction and data loaded into BI:-
Doc 1 in BI should have 100 Units and 500 INR   (Original or yr very first invoice)
Doc 2 in BI should have -100 Units and -500 INR (Reversal Invoice)
Doc 3 in BI should have 75 Units and 375 INR.    (Rebill Invoice)
When you run a query for the respective Business Partner for that posting period, Doc 2 should offset Doc 1. As a result you should get result from Doc 3 only, which is 75 Units and 375 INR.
Cheers,
Chris

Passing validation(ob28) for particular company code at the time of posting

Hi Gurus,
My business requirement is creation of new company code for recalculation of accrual amount. where in these recalculated amount will be posted to new company code, however we had defined some validation (ob28) for document posting. so my query related to is it possible to pass all the validations for this new company code at the time of posting?
your response will be highly appreciated
Thanks & Regards,
Jamuna

Hi,
My requirement is to create new company code, and whenever the document will be posted during the posting whatever validations has been defined with respective to document posting should be restrict for new company code.
so wheneever business will try to post the document for new company code all the existing validations will be by pass for document posting.
Thanks,
Jamuna

How to configure to generate two accounting documents for Mvt 645

Dear Experts,
I read all documents related to STO one-step procedure (mvt 645). They said that the system generate two accounting documents for 2 company codes (receing and issuing company codes) after goods issue reference to DO.
However, after configuration one step procedure and test my system, the system only generated one accounting document for receiving company code, not for issuing company code. In Material document, I saw 2 Mvt 645 and 101. In the lines having Mvt 645, I saw G/L account of cost-of-goods-sold.
Could you please to show me how to generate two accounting documnets automatically after goods issue referent to DO with Mvt 645?
Thank you so much,
Best regards,
Anh Duong

My configuration steps are:
Step 1: preparation:
create customer and vendor master
extend sales & purchasing views for material master
Step 2: Assign customer number and the organizational units (sales organization, distribution channel, and division) to the Supplying plant and Receiving plant
IMG --> Materials Management --> Purchasing --> Purchase Order --> Set up Stock Transport Order --> Define Shipping Data for Plants
Step 3: tick on column "One step" for the line of supplying, receiving plant, and PO type cross transport order
IMG --> Materials Management --> Purchasing --> Purchase Order --> Set up Stock Transport Order --> Assign Document Type, One-Step Procudure, Underdelivery Tolerance
Step 4: assign delivery type NLCC for PO type cross transport order
IMG --> Materials Management --> Purchasing --> Purchase Order --> Set up Stock Transport Order --> Assign Delivery Type and Checking Rule
These above steps are in MM module.
Please help me,
Thank you,
Anh Duong

Letter of Credit usage for Cross Company Code - sales

Dear All,
Is is possible that we can use L/C Letter of Credit document for cross company code sales processing.
client have created LC document for Company A which can also be utilized for Company B.
Thanks,

HI,
I'm also interested in Cross Company Code Finacial Documents & revolving letter of credit.

Unreverse a reverse document (or voided check that was cashed)

The company reversed a payment document but did not void the check. The check was later cashed by the vendor. The company subsequently mark the check as voided but the check has already the bank. What to do now?
The best solution is to unreverse the reverse document since the company agreed to pay the check. But it don't think it is possible in SAP.
Alternatively, the company can post another invoice and link the cashed check with it. But is this possible?

1) FCHE -delete the void cheque (to enable assign this cheque again)
2) Make a payemt again and assign the same cheque no again.
I have done this sometime back. Therefore if you want try the same in Test environment and if satisfied repeat in PROD.
Nadini

How to display all reversal document ?

Dear all,
When reversal document with negative posting, the balance is return 0. So, how can i display all the reversal documents for reporting ?
Thank you very much,
Sylvecast.

Sylvecast,
You may have to elaborate a little more on what you are trying to accomplish. Let me add what I can based on my experience. When a document is posted in a GL account for instance, the balance and activity on the acccount can be seen and displayed by using FS10N or FBL3N respectively. If documents are reversed (posting opposite entries) the original balance will return to zero but even though the balance is zero, the activity of both the original and the reversal documents can still be displayed using FS10N (and double clicking the period to see the activity) or FBL3N.
Or, are you asking for a way to display all revesal documents created?

How to block postings for particular company code ?

Hello All,
I have a scenario like FI document shouldn't generate automatically when I invoice with reference to order/delivery document.
Just I want only Invoice number but not FI document (It should park instead of creating automatically) for particular company code among all and later I will create manual FI document with reference to that Invoice.
Existing solutions:
1.Can control in document functionality but I am using single document for all company codes
2.Can control using FD02 transaction but I have many customers
Please suggest any new solution other than above.
Regards,
Gangadhar

Hi,
Please check the below thread:-
Re: VF01: Prevent document posting in FI via user exit
It should be useful in your situation.
Regards,
Gaurav

Not able to post J1I5 (Excise Updation for reversal document)

Hi,
We have reversed the material document with "MBST".
SAP does not update the reversal excise entries for the document posted through MBST.
SO WE ARE TRYING TO UPDATE EXCISE (PART1) THROUGH J1I5.
Input given are Posting date, Excise Group, company code,Plant, Material document and classification as "IPD"
We are getting the material document list after executing the J1I5 but not able to simulate and Post the same
Error "Processing over ZERO Records.
Thanks
Prakash

hI,
Go to J1IS click cancel excise invoice (Shift+F6) , give the internal document number of your excise invoice created and year then click the cancel excise invoice , it will cancel the excise invoice .If u go to J1IS and cancel the document only the excise invoice created will be cancelled, no accounting entries will be generated. In order to capture accounting entries you have to fetch the accounting document of J1IS through table j_1iexcdtl and j_1ipart2, pass a reversal entry for the accounting document through FB08. And if you want to post again with the same material documents create the excise invoice in J1IS with respective same material document

BAPI reverse document for JVA company

Similar Messages

Maybe you are looking for