Field display in MIRO

Hi All
we need to disaply field "Xref3" form table "bseg" in MIRO screen for user in input.
please guide
thanks

Hi Aseem/Vinod,
If you are working on ECC 6.0 then you can easily get XREF3 on MIRO Screen.
Just take the help of your ABAPer and guide him as follows:
create an implicit enhancement in subroutine MODIFY_FI_SCREEN of program LMR1MF6Q and add the following code:
PERFORM modify_fi_subscreen TABLES t_acscr
USING 'XREF3' 'ACTIVE' '1'.
After activating the enhancement when you will run the transaction MIRO then you will find XREF3 in the 'Details' tab.
Regards,
Firoz.

Similar Messages

Payment terms field display at MIRO screen

Hi,
How can I make Payment terms field "Display" at MIRO screen??
Regards,
Sattuj

Hi,
The fields on MIRO are not configurable as with other transactions.
You have no config control of these fields.
You should not really block the field, because what happens if you ever need to change it (believe me this WILL happen).
Steve B

Modify screen field layout in MIRO - Item level

Dear All,
I would like to know if I can change the field sequence in MIRO transaction at the item level. I want to move the Purchase Order number field next to the item field in MIRO and this needs to be premanent whenever I create a new invoice in MIRO.
This sort of a change is possible in ME21N by creating a new variant through the configuration icon in ME21/22 or 23n at the line item level. I want to know if a similar setting is possible in MIRO, if so please guide me.
Thanks and Best Regards
Badrinath Murali

Hi,
Have you tried to carry out the following steps?
1- Transaction OLMRLIST
2- Screenvariant        7_6310
   Programm             SAPLMR1M
   Dynpro               6310
3- Click button 'With Processing'You get transaction MIRO
4- Enter the invoice date and click Enter-Button.
5- In screen 'Confirm Screen Entries' check the 'Adopt column reference'
and 'Adopt column width'. Click 'Exit and Save'
6- Enter 'Save'.
7- Check and activate the screen variants: Click the button 'Check' on
the main screen of Transaction 'OLMRLIST'. Select the screen variants
on coming screen and click 'Adjust and Save'
If after reviewing the above steps you are still having problems
viewing both display variants in MIRO, please take a look at note
372776.
Best regards
Erika

How add a new field in transaction MIRO

Hello !
I need to add a field (tiban-iban) in a subscreen of transaction MIRO, and I don't know how
Screen concerned
SAPLMR1M / n° 6510
I need to add the field (display only), and fill it from table tiban.
Thanks
Aussie

hi
u can check the transaction varients in SHD0
Adding new field (ie Goods Recievd date ) at item level in MIRO tcode.
How to add a field to the Vendor Info on MIRO?
https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=addfieldin+miro&adv=false&sortby=cm_rnd_rankvalue
regards
kunal

Recon A/c field changeable in MIRO

I want to make the Reconciliation A/c field changeable in MIRO.
Is there any user exit available?
VS
Edited by: vs on Jan 11, 2008 3:19 AM

Hi VS
The reconcilation account which ever you want to display change mode, make
that GL account reconciliation a/c for ready for input via T.code Fs00.
for example my reconciliation a/c is 100005.
go to Fs00 select 100005 a/c and select change goto Cretae/bank intrest
data, there you can find it out reconciliation a/c ready for input check
box, select that filed and save it.
then go to Financial accountng- a/C receivables / a/c paybles- business
transactions, there you would see alternative reconciliation a/cs.
Maintain alternative reconciliation a/c for Regular Gl account and save it.
for example : in our case the main reconciliation a/c is 100005
cretae on more Gl account with reconciliation a/c and come to above screen
maintain both Gl accounts and save it.
then when you go to Miro, whenever it is posting respective reconcilation
a/cs automatically the field would be change mode you can able to enter
alternative Recon account.
Hope it helps
Reward if Useful
Regards
SE

Issue with length of delivery field displayed in LM06 on RF device

Hello everyone,
I have a challenging issue which I have posted on another forum as well, and was hoping that somebody on SDN may be familiar with this. This issue is being reported by one of our warehouses. SAP RF transaction LM06 is used extensively in this warehouse, and we use a 10 digit delivery number. The delivery field itself in SAP is 20 characters, and we have always displayed 10 on RF. The warehouse is telling me that about a week ago, the number of characters displayed on the RF device for the delivery field in LM06 changed from 10 to 9, and that a leading zero was being inserted when the barcoded delivery number was scanned. There have been no changes to the barcode on the picklist, and I am told there have been no changes to the printer that prints the pick list. A change was deployed a week ago that contained some unrelated configuration and a small code change in a user exit for transfer order creation. Neither of these is in any way related to LM06. Our basis team tells me that there have been no changes to the SAP console server, but I have no way to verify that myself as I am a WM functional consultant. Can anybody tell me if they have seen a problem like this before, or if the field display for a transaction like this is configurable in the SAP console server? The RF hardware being used is the Symbol PDT-8146. Unfortunately, I am 10,000 miles from the warehouse, which puts me at a bit of a disadvantage in trying to diagnose this.

Thank you both for the good feedback. I have also gotten some useful feedback from my posting on ittoolbox, and have forwarded all of the responses to a colleague who is located at the site where the warehouse is located. I will provide feedback once my colleague has had a chance to investigate further based upon the suggestions that I have received.

Regarding Selection-Screen Field Display

Hi All,
I have issues with Selection-Screen field display.
The Actual issue is i had declared a selection screen field as: s_exgen FOR embk-exgen.
EMBK-EXGEN is actually 20 Char length field.
But in output display it is being shown as 18 Char field though i can type in all 20 characters.
But display restricted to 18 Characters only.
Can anybody give me the solution for the same!
Thanks in advance.
Thanks & Regards,
Prasad.

Hi,
You can decrease the visible length of the field but you can not increase more than database field length. check SAP help on this :
select-options: s_exgen FOR embk-exgen VISIBLE LENGTH 5.
... VISIBLE LENGTH vlen
Effect
This addition allows you to shorten the visible length of the corresponding screen field on the selection screen to vlen.
Variant 2
SELECT-OPTIONS sel FOR (f).
Additions as in variant 1.
Effect
In this variant, (f) must be a field containing the name of the actual reference field at runtime. The system creates the LOW and HIGH fields as character fields with length 45. However, their appearance on the selection screen is inherited from the reference field whose name is contained in field f at runtime.
Regards
Appana

Single field display on external crt monitor

I can't find the setting to display a paused frame as deinterlaced on my external monitor. (My client is put off by the 'shimmering' of the two field display when paused). Is there a setting that will change this?
Many thanks

You must apply the Deinterlace filter to the freeze frames: Filters > Video > Deinterlace.
Hope it helps!
Alberto

Field displays AFRange_validate in PDF template

I have created a pdf template, and added a few fields for calculation. I have set validation rules for the field, but when I run the report, the form field displays AFRange_validate as the default value, I have tried giving default value as 0, but no success. Anyone out there to help?

Mike
PDF templates do not support barcode fonts in the same way as RTF templates. I have to admit, not having tried it Im just thinkning out of the box. But you ought to be able to hightligh a field in the Adobe form and set the font to a barcode one on your client. The key will be to ensure that the PDF engine can access the font on the server. And thereby hangs a tale - does the PDF engine 'look' for fonts when processing a PDF template. I'll drop the dev team a mail to ask.
Bounce the thread if Im not back to you by Mon
Tim

Need to Increase OTL Field Display Size

In OTL, I modified the user-customizable views PA_ONLINE_PROJECTS_V to display the Project Number in this concatenated format...
(ProjNum) ProjDescription
using...
CREATE OR REPLACE FORCE VIEW apps.pa_online_projects_v (
     project_number,
     project_name,
     project_id,
     project_type,
     start_date,
     completion_date,
     carrying_out_organization_id,
     carrying_out_organization_name
AS
SELECT DISTINCT
     DECODE(project_number,SUBSTR(project_name,1,LENGTH(project_number)),project_name,SUBSTR('('||(project_number||') '||project_name),1,25)),
     project_name,
     project_id,
     project_type,
     start_date,
     completion_date,
     carrying_out_organization_id,
     (SELECT
          name
     FROM
          apps.hr_all_organization_units
     WHERE
          organization_id = carrying_out_organization_id)          carrying_out_organization_name
FROM
     apps.pa_projects_expend_v;
However, only the first 25 characters show up on the LOV and timecard. Other than that, it works perfectly across the system.
Does anyone know how to increase this from 25 to, say, 48 char? Oracle provided a white paper on this, but it only shows how to make the field display wider--not increase the number of characters.

Do you mean to say that LOV field is having width more than 25 chars but it still shows only 25 chars?
Are you using a seeded projects layout or a modified one? If it is a modified one, what is the value of QUALIFIER ATTRIBUTE5 for that LOV component?
--Shiv

How to adjust fields display width?

work in jdev 11.1.2.3.
in the form VISUAL DESIGNER, all fields looks same length, and there is no width attributes to adjust. When it runs, some fields display too long.
How to adjust fields display width during design?
Thanks.

Hi,
You dont need to redo it again , unless you have changed properties after initial drag and drop.
If you have changed , use the value #{bindings.yourAttribute.hints.displayWidth} for columns property.
<af:inputText value="#{bindings.name.inputValue}"
label="#{bindings.name.hints.label}"
required="#{bindings.name.hints.mandatory}"
*columns="#{bindings.name.hints.displayWidth}"*
maximumLength="#{bindings.name.hints.precision}"
shortDesc="#{bindings.name.hints.tooltip}" id="it38">
<f:validator binding="#{bindings.name.validator}"/>
</af:inputText>
Thanks,
Naresh

Making "Business Place" field Required in MIRO

Dear fellow SAPers,
Can anyone please tell me how to maintain the status of "Business Place" field in MIRO as Required? The client wants to ensure that this field is populated everytime MIRO is done, irrespective of the user.
Please Help,
Thanks,
Amit Bharti

Hi,
To make the business place field required for MIRO, you can write the validation as below:-
Step 1:-
Create a message ID via transaction code SE91 for message class /EACC/MSG/ACC_COMP.
Step 2:-
Go to transaction GGB0 and create the validation step at line item level in Financial Accounting as below:-
Pre Requisits:-
      BKPF-TCODE = 'MIRO' AND BSEG-BLART = 'K'.
Check:-
      BSEG-BUPLA = ' '.
Message:-
     Message created in step 1 as error message.
Step 3:-
Please also check that this validation has active status (Status=1) at line item level for your company code in transaction OB28.
Regards,
Gaurav

Custom infotype - issues with conversion class - making fields display only

Hi,
I created the custom infotype 9008 using t-code PM01, created conversion class ZCL_HRPA_UI_CONVERT_9008_XX and assigned it to screen structure ZHCMT_BSP_PA_XX_R9008 in the view V_T588UICONVCLAS. Coded the methods IF_HRPA_UI_CONVERT_STANDARDOUTPUT_CONVERSION and IF_HRPA_UI_CONVERT_STANDARDINPUT_CONVERSION. I'm trying to make some fields display only within the method OUTPUT_CONVERSION dynamically. Coded the check class ZCL_HRPA_INFOTYPE_9008 with business logic.
Everything seems to be working fine when I test using the test tool through t-code PUIT_UI.
When I try to create/modify 9008 record through PA30, the code in the methods OUTPUT_CONVERSION and INPUT_CONVERSION is never getting executed. The control is not coming there at all. The fields are allowing input. Any idea why this is happening.
We are on ECC 6.0 and at service pack level SAPKE60035. Couldn't find any relevant SAP notes as well. Appreciate your help in this regard.
Thanks,
Kumar.

Hi Venkata,
Check this document.
This explains about custom infotype creation.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60a7586d-edd9-2910-68a8-8204303835a1?overridelayout=true
regards,
Brinda L

PO - GL Account Field - display only

Hi,
Please could you advise on the options for making G/L Account field display only in ME21n?
I think there are probably a few ways of doing it which I am investigating, but would like your opinion and advice if possible.
Thanks in advance.
As always - points up for grabs!

Hi,
Hope you are doing cost center accouting with account assignment K while creating PO
Then go to MM --> Purchasing --> Account assignment --> Maintain account assignment category _-> Select cost center K --> Change view account assignment details you can
make G L account as mand or optional or display or hidden.
Check this out please if it helps you.
Best regards,
Sridhar

Field Selection for MIRO Vs FB60

Dear Guru,
I have some problem about field screen in MIRO is not same FB60.
Example: FB60 has field: PmntCurrcy (INVFO-PYCUR Currency for Automatic Payment) in header tab: Payment
but in MIRO does not has it.
Is it possible to configure to open that field in MIRO?
Thank you very much.

Hi,
have you read this OSS Note?
https://service.sap.com/sap/support/notes/904652
the tittle is quite revealing: Note 904652 - MIRO: Different from FB60
Best regards.
Edited by: Pablo Casamayor on Sep 8, 2009 10:18 AM

Field display in MIRO

Similar Messages

Maybe you are looking for