Field for location
Hello,
I would like to have a field in ESS to record if the work was done at home, in the office, at the customer and so on. Unfortunately I cannot find the correct field for this. What would be the correct field for this or is it neccessary to use a user defined field for this?
Thx in advance,
Vanessa
Thx for your answer. But I am searching for a field in order to handle the expenses and so on. For this I hoped to have overseen a field for this and now I am wondering if I really have to use a user defined field to handle this because I think that it is "normal" to have different locations like home office and so on that have to be handled related to expenses, ...
Any other suggestions?
Thx, Vanessa
Similar Messages
-
TABLE/FIELD FOR SALES ORDER'S SHIP TO LOCATION
Hi everyone,
Does anyone tell me what is the related tables/fields for Sales Order's Ship To Location? Since I want to display the Ship To Location information in the Oracle Report in Oracle Apps R11i.
I tried to use the following SQL select statement to retrieve the Ship to address:-
-- SHIP TO LOCATION
select a.address_id, c.customer_name, C.CUSTOMER_ID, A.SITE_USE_ID from ra_Site_uses_all a, ra_addresses_all b, ra_customers c
where a.site_use_code = 'SHIP_TO' and
a.status = 'A' and
b.address_id = a.address_id and
c.CUSTOMER_ID = b.CUSTOMER_ID and
b.status = 'A' and
c.customer_id in (select customer_id from ra_customers) and
c.status = 'A' and
c.customer_name like 'CLARION (H.K.)%'
But I found that the data is BILL TO address. Can anyone help me? Thanks.Hi all, I managed to solve my problem. Here's the query in case someone need it. Thanks
SELECT party.party_name "Send to" (SELECT party.party_name
FROM hz_cust_site_uses_all bill_su,
hz_cust_acct_sites_all bill_cas,
hz_party_sites bill_ps,
hz_locations bill_loc,
hz_parties party,
oe_order_headers_all h
WHERE h.invoice_to_org_id = bill_su.site_use_id
AND bill_su.cust_acct_site_id = bill_cas.cust_acct_site_id
AND bill_cas.party_site_id = bill_ps.party_site_id
AND bill_loc.location_id = bill_ps.location_id
AND bill_cas.party_site_id = bill_ps.party_site_id
AND bill_ps.party_id = party.party_id
AND h.order_number = 'your_order_number') "Invoice to"
FROM oe_order_headers_all h,
hz_cust_site_uses_all ship_su,
hz_cust_acct_sites_all ship_cas,
hz_party_sites ship_ps,
hz_locations ship_loc,
hz_parties party
WHERE h.ship_to_org_id = ship_su.site_use_id
AND ship_cas.party_site_id = ship_ps.party_site_id
AND ship_su.cust_acct_site_id = ship_cas.cust_acct_site_id
AND ship_cas.party_site_id = ship_ps.party_site_id
AND ship_ps.party_id = party.party_id
AND ship_loc.location_id = ship_ps.location_id
AND h.order_number = 'your_order_number'; -
Metadata filter for "Location" filters on metadata field "Sublocation"
It's confusing that the metadata filter for "Location" filters on metadata field "Sublocation". This is confusing until you figure it out. Adobe should assure that field names in the filter tool match the field name in the Metadata Panel they filter on. Should be an easy fix.
Thanks -- DanYou might repost this in the official Adobe feedback forum: Recently active topics in Photoshop Family about Photoshop Lightroom. This forum is a user-to-user forum, which Adobe monitors less frequently.
-
How to create a new field for Q3 - QM notification in Header and item level
Dear All,
l
Sub: How to create a new field for Q3 - QM notification in Header and item level
Ref. the link --> Quality Notification
We want to create a new field in header level and item level.
As per the thread the solution is given below.
In the IMG Config: Quality Management -> Quality Notification -> Notification Types -> Define screen areas for notification types Then Choose 'Define screen areas' Then Click on 'New entries' button Now, select the relevant Notification Type and click in 'Enter'. Select the 'Iten Cases' register and remember to setup the Tabstrip Header, Icon, etc. Set the 'Tabstrip active' flag. Then Save.
Quality Notification -> Notification Types -> Define screen areas for notification types
WE ARE UNABLE TO FIND IN CUSTOMIZATION PATH --> DEFINE SCREEN AREAS FOR NOTIFICATION TYPES.
Please help.
Question No. 2 :
THE REQUIREMENT IS GIVEN BELOW.
We want to hide the field in Q3 - QM Notification
In header --> Reference tab --> Item (sub heading) --> "DEFECT LOCATION" FIELD TO BE ELIMINATED (HIDE)
Ref the link --> Quality notification
The solutiion is given below.
Hi Sami,
We can hide the collumns using the Transaction OQM1 and Program Name SAPLIQS0.
Lets say Defect location need to be hidden, the field TXTCDOT need to have the radio button HIDE.
Hope this will suffice your requirement.
Kindly ask me if you need any other details.
Thanks & Regards,
Srinivas.D
Hi Sami,
We can hide the collumns using the Transaction OQM1 and Program Name SAPLIQS0.
Lets say Defect location need to be hidden, the field TXTCDOT need to have the radio button HIDE.
Hope this will suffice your requirement.
Kindly ask me if you need any other details.
Thanks & Regards,
Srinivas.D
By double clicking the "DEFECTIVE QUANTITY (EXTERNAL), WE COULD NOT GET --> field TXTCDOT .
Plese do the needful.
We are using ECC6.0 Ehp3 and Ehp4.
With Best Regards,
Raghu SharmaDear Pushpa,
Transaction Code :SHD0 is working fine.
Please accept my sincere thanks for your sharing your Knowledge.
I am able to fulfill my
Regarding the enhancement, I have not tried.
Once I will complete, I will award the fulll marks to you.
With Best Regards,
Raghu Sharma -
Field fund is a required field for G/L account 3034 1501070000
Hi everybody, I am having a problem with the new storage location created, when I register a material issue (transaction mb1a) The system show me the next error:
Field fund is a required field for G/L account 3034 1501070000
The account 1501070000 is the new account created for the new storage location. It works with the fund 40-002. But if i change the account for the 3034 valution category the system do the material issue without problem but uusing the fund 40-001. Do you have any suggestion? Regards.Error in the message
-
Transparent table field for Tax Indicator on Material Master
I am trying to find the transparent table which holds the Tax indicator field for material in the purchasing view of a material master. Usually it has values - 0,1. Where is this field stored ? I am unable to locate it. I looked into CDPOS..It points to DMLAN. But that is a structure..
TAXIM is the field ( Tax Ind. f. Material). I need to retrieve this field for a report).Hi,
The country is got based on the plant...you can get the country from T001W for the corresponding plant.
Thanks
Naren -
How to display field Functional Location Field in Asset Master Data
Dear Experts,
I really appreciate for your advices on how to display Functional Location Field in Asset Master data.
I have checked the configuration on path IMG:\Financial Accounting->Asset Accounting->Master Data->Screen Layout->Define Screen Layout for Master Data
I have chosen the screen layout and review all Logical Field Groups. And there's no field "Functional Location" is available. I also didn't find "Add New" button to add "Functional Location" field.
Thank you
Best regards,
FransDear Frans,
I am sorry this is not possible.
Note 140482:
The field was created as a precaution. However, it is not being used at
present and consequently is not supplied.
In particular, you cannot use the field as a criterion for a selection
in Asset Accounting reporting. This is still true even if this field has
been included in the selection view delivered for the dynamic selections
by modification.
regards Bernhard -
How to add new field storage location of MM in FMDERIVE
Dear All
I want to add new field storage location in FMDERIVE as need to consume budget on the basis of storage location
Thanks in advanceHi SAPCOFI,
With Eli and Aleksey on this thread, you dont need to worry anymore
Just to add on to the inputs....
Ensure that the USERTEMP1 buffer is cleared before a value is entered. We faced this issue wherein the previous S.Loc value was left as it is in the USERTEMP1, resulting in an incorrect assignment.
I also suspect that you might need to run the process of identifying the enhancement point and populating the S.Loc value into the memory and then to USERTEMP1 for different transactions separately. Not sure if this is the standard process, but atleast we did it that way.
For eg, we faced issues during Goods Issue from MIGO, as also during 301, 309 and 311 movement types. So execute these transactions too once the development is done and if the USERTEMP1 field isnt getting populated..
FMDERIVE TRACE was the most important tool during our tryst with S.Loc mapping into USERTEMP1....Ensure that you set it everytime during testing for this S.Loc, post development
@Experts - Please correct me wherever I've gone wrong.
Regards,
Wy. -
Database Field for Picked Quantity in Delivery
Hi All,
We want to know the Database Field for Picked quantity in a delivery. We checked the help for the field and it points to the LIPSD structure and the field PIKMG. However I could not find it in LIPS table or any other table. Could somebody please help me locate this field in the database ?
Thanks,
AmitHi, This is late response i know, but maybe someone else is looking for same and needs code for same. Please keep in mind that you also need to check if users have done LT0G return from GI are back to picking bin. In this case you need minus the TO from total picking qty.
ABAP routine:
form LIPS_PICKED using LS_LIPS type LIPS.
data: LT_VBFA type table of VBFA,
LS_VBFA type VBFA,
LS_LTAP type LTAP.
select * from VBFA into table LT_VBFA "Fetch to data from doc flow and count picked
where VBELV = LS_LIPS-VBELN
and POSNV = LS_LIPS-POSNR
and VBTYP_N = 'Q'.
clear LS_LIPS-LFIMG.
loop at LT_VBFA into LS_VBFA.
select single * from LTAP into LS_LTAP
where LGNUM = GS_SCREEN_100-LGNUM
and TANUM = LS_VBFA-VBELN
and TAPOS = LS_VBFA-POSNN
and PQUIT = 'X'. "Picked!
if SY-SUBRC = 0.
if ls_ltap-vltyp = '916'. "Source is GI area => LT0g done, it is minus!
LS_LIPS-LFIMG = LS_LIPS-LFIMG - LS_LTAP-VISTA.
ELSE.
LS_LIPS-LFIMG = LS_LIPS-LFIMG + LS_LTAP-VISTA.
endif.
endif.
endloop.
endform. "lips_picked -
QM-Customer Info record-QV51(Need Table & field for - "Before delivery" -)
Hi friends,
In the qm Customer info record(qv51), there are 3 radio buttons under quality inspection field-(Before delivery,After delivery,By customer).. I am checking the table " QVDM" .I am able to locate the fields (1.After delivery,and 2.By customer ) .
But I couldn't locate the field for " Before delivery" in the table QVDM. 1. Is it in some other table ? 2. If it is so, in which table I can find the field for " Before delivery" ? Help me.
Regards,
ManiBy default system assumes before delivery unless one of the indicators "After delviery" or "By Customer" is set.
There is no specific indicator for "Before Delivery"
FF -
Requirement to add new field in Location Tab of Service order
We have a requirement in which it is needed to add anew field in Location Tab of Equipment and Service order. For Equipment part , we have added the field via Enhancement ITOB0001 and activating the field via "Set View Profile for Technical Objects".
But for Service order part, we are not able to add the new field in the Location tab , please suggest how can we achieve this.Hi Deepika,
If you are not particular about having it in Location tab use Screen-Exit provided in the Enhancement IWO10018 to add an additional tab to host your custom fields. as under:
ABAPer will be able to readily follow these steps
Steps will be,
1. Create a Data type to capture the your custom values. (SE11)
2. Include your Zfield (with this datatype) through in the include structure CI_AUFK of the Order Header table (AUFK)
3. Create a project with Tcode CMOD and assign the enhancement above (IWO10018)
4. Go to Components and Click on Screen Exit
5. Here Go to Screen-painter (Blue Arrow named Layout) , Create your Field screen-box, field Text field and field Input field. In the field input field Name you should use the above Zfield details (table-field)
6.Activate the project CMOD and come-out.
Run IW31, you will see an additional tab like shown above. But here the field is nothing.
We haven''t told the system what is to be filled here.
For this in continuation to the above steps between 5 and 6, insert this step.
5a. Write your code in Function Exits : EXIT_SAPLCOIH_018 and EXIT_SAPLCOIH_019 of the same enhancement (IWO10018.)
Code to be written in exit 18:
move-corresponding COCI_AUFK_IMP to AUFK.
Code to be written in exit 19:
move-corresponding aufk to COCI_AUFK_exp.
After this exercise your Z-field will be visible in the Enhancement Tab as shown in the picture in the beginning. Now your values will be saving to AUFK table.
So, this is completely an ABAPer job.
Hope this information helps you.
Jogeswara Rao K -
Documentary Batch Field for Line item when calling BAPI_GOODSMVT_CREATE
hi all,
Iam unable to locate the Documentary Batch Field for each line item while posting a Goods Issue using BAPI BAPI_GOODSMVT_CREATE.
BAPI2017_GM_ITEM_CREATE structure has got no field to enter the DB number against each line item. Although its not a mandatory field while posting a goods issue when calling the BAPI, but there shud be a input field for the same. When doing a similar posting in SAP using MIGO transaction it's mandatory to enter a Documentary Batch number(SAP Field name DOCUBATCH_CHARG). Does anyone have come across this situation. Is there a field with different name in the BAPI2017_GM_ITEM_CREATE structure ? Appreciate your thoughts !
Regards,
GilmourHi Vindy,
bapi2017_gm_item_create-batch is the field for the Batch.
However Iam looking for a field called DB No which is basically a Documentary batch ensure the traceability of a material, without it being necessary for the stock of the material to be managed in batches. If you look at the Item section in MIGO you would have Batch and DB No for each line item and Iam looking for the DB no and not the primary Batch.
Thanks,
Gilmour -
Change Search help for Location in Schedule creation screen(NWBC)
Hi all,
My requirement is to change the standard search help for Location field in Standard stop sequence of Schedule creation in NWBC.
Presently, the search help for the location field is a webdynpro component WDR_F4_ELEMENTARY .Is there any possibility to replace with the custom search help.
Can anybody please let me know how to replace the search help.
Thanks&Regards,
Sharmista.Hi
I suppose you may create a component customizing for /SCMTMS/WDCC_SCH_C_LOC_ATS, and maintain your DDIC search help for location ID, this will replace the one assigned in structure:
You may only maintain DDIC search help here, but if you have a custom developed search help, then you may need to go with another approach, in viewexit class (/SCMTMS/CL_UI_VIEWEXIT_SCH) adapt_fields (ADAPT_FIELDS), modify the attribute 'WD_VALUE_HELP' = custom search help.
Hope it helps -
Create Expense Report how do you make field 'Start Location' mandatory
Hi
We are using travel expenses within ESS and we wish to make the field 'Start location' mandatory. This field is on the mileage screen.
I have checked portal config and when you preview the iview and control/right click there is the option to make this field mandatory however this does not work.
I have checked the IMG config 'Schema and Field Control for the trip schema we are using but when I select the field 'PTRV_UTIL_KMVER-LOC_FROM' and select 'Alternative Display Type' the option 'Entry in field is required' does not become available for use.
Does anyone know how to achieve this?
Many thanks
JulieHi Julie,
You have modify the table T706Z1 to make both of this fields mandatory, this is the only
way to make the field mandatory. In standard system the fields
PTRV_UTIL_KMVER-LOC_FROM and PTRV_UTIL_KMVER-LOC_TO cannot be set to
mandatory. In this case you have to do some additional settings in the
in the table PTRV_T706Z_FLDS (se16):
PROG: PTRA_WEB_INTERFACE
DYNNR: 1800
RDYNNR: WEBE
Regards,
Raynard -
Alternative method for location.reload()
Hi,
Can anyone suggest what is the alternate method compatible both in IE as well as Netscape for location.reload() to reload a frame?I tried using history.reload() but it doesn't work!!!Termination
Set Up Personnel Actions
Create reasons for Personnel Actions
Define Action Type for Termination
Define Infogroups
Determine Periods of Notice
Before making the settings in feature 40TRM, you must set the same Action Type for the Action
Reasons N0, N1 and N2 in the table view Reason for Action (V_T530).
you can use IMG link under Payroll India -> Termination -> Create reasons for Personnel Actions.
For example- if 40TRM return value is 10 then there shud be action reasons N0, N1, N2 for the Action 10 in V_T530.
well 1 more thing, enter the pernr in termination workbench and press ENTER then try to check F4 of 'Reason'.
I know it looks funny but as the pernr is mandatory field there, you need to press 'Enter' after this.
Determine Deadline Type
Maintain Calculation Factor for Retiral Benefits
Calculation method for Notice Pay
Try this hope u have maintained the Gratutiy configuration correctly
Maybe you are looking for
-
How to print a document in reverse order using Java Print API ?
I need to print a document in reverse order using Java Print API (*Reverse Order Printing*) Does Java Print API supports reverse order printing ? Thnks.,
-
TDS at lower rates for certian limit
Hi experts, Income Tax Department gives vendors certifcate for lower deduction of tax u/s 197, which is a permission to a payer to deduct NIL Tax or tax at a lower rate. This permission is generally given for a Financical Year. However, recently it i
-
hi, i am working on a script. in my output i have 3 pages in form for each page i have to display page total and on last page i have display the grand total. Can any one tell me how shud i do it. Rgds, Fattesingh
-
Aggregate device: BIG PROBLEM with mbox(digidesign)
i must admit, meanwhile i am truly desperate... MAYBE ONE OF YOU HAS THE SAME EXPERIENCE AND HENCE A SOLUTION TO IT... problem is as follows: i have a mbox1 connected via usb to my ibook g4 1.33ghz (ppc) and want to make an aggegate device in the osx
-
Screen defaults resets to low resolution
I was working on my computer tonight, and my background picture changed, and the screen went to what appears to be a 256 color display, although it still appears to be 1440 x 900. The images and text are awful. I've checked the settings in the system