Field for packaging code

Hi all,
i am searching for packaging code field.my packaging code data is comming in the table THM073-pacod or THM074-pacod.
but how to relate this table with packaging material which is present in mara table.
i am writing a report for delivery order.here we are using packaging material like carton & pallet.we have created this packaging materials in material master.for this packaging material, i have to refer a packaging code which is present in THM073 table.
plz suggest me how i can extract that data from that table.it is very very urgent.
any help is highly appreaciated.
Regards
pabitra

Hi Pabitra,
You can find the relationship between Dangerous Goods Regulation and Material in table DGTMD. Using this relationship you can link Material and PACOD using table THM073.
Hope this will solve your problem.
Regards,
Sathish
Note : Reward useful Answers

Similar Messages

Table and fields for " Batch Code Date " and "Shelf Life days".

Hi All,
What is the field for " Batch Code Date " and "Shelf Life days".
And in which table are they present.
Thanks & Regards,
Ahmed.

Check the table
MCHA Batches
Field VFDAT Shelf Life Expiration or Best-Before Date

Field for transaction code description ?

Hello,
I know that the T-code is stored in table BKPF, but what is the table where the transaction code DESCRIPTION is stored ?
Thanks,
Julien

julien,
tcodes are not stored in BKPF.
they are stored in TSTC ->tcodes and TSTCT ->text for tcodes.
and BKPF might be storing the tcode in some field which stores the value of tcode from which the document is being created. but that is not the table which stores TCodes.
hope this helps

Fields for building code

hi all,
i am cheenangshuk das working on a standard ALV report.
i need to insert some new column in that report and populate that column with some general cutomer data like customer house num / street address ,building code, telephone no. Can any one please help me with the field name that captures the building code. please ensure that the table you are suggesting me is a customer table.
REGARDS,
CHEENANGSHUK DAS

Hi,
for each customer thetes is one address nubmer
select address number from KNA1
based on the address number read building code from the table ADRC.
Regards,
Sriram

Mandatory field - Header text and Reference field for company code

Hi
In transaction code FB60, I want to make header text and reference field mandatory at the company code level.
For one company code , the header text and the reference field should be made mandatory but for the other 8 company codes , those fields should not be mandatory.
if I make the fields mandatory via the document type , then it will be applicable for all the company codes using the document type.
thanks in advance
Kind regards
sap student

Hi Chintan
I have written the validation rule and it is working fine.
Thanks
kind regards
sap student

Selection field for vendor categorisation

Hi,
I have request to find a proper field for letter code and description in vendor master for vendor categorisation. (Like for example Order currency field in Vendor Master) The field must be minimum three caracter long.
Further this vendor categorisation data will be required to appear in some reports.
Can anyone tell me the way to implement this vendor categarisation code.

Hi,
You can use many fields for vendor categorisation purposes such as mainting SIC code, Industry type etc. The best place to do this is General section/control tab. there are fields under referece data section such as LFA1-KRAUS Credit Info number that can be used or you can append the LFA table with custom fields. Sometimes these fields are suppressed and not visible in Vendor master screen. To enable them you need to navigate to img-financial acc.-acc. receivable&payable--vendor accounts -- master data -- Preparations for Creating Vendor Master Data -- Define Screen Layout per Activity (Vendors) and change from suppressed to optional or mandatory.
Hope this helps

Using MBGMCR03 Inbound for reason code

I'm in the Functional Speccing stage of a project. the process I need to document is this: Requirement to post goods movements interfaced into SAP from an external system. I have scoured the forums throughout the web and found only 1 thing similar (on this site) - solution is to use WMMBXY/WMMBID02.
The problem with this is that there is no specific field for reason code (which I need to use) in WMMBID02 as there is in MBGMCR03.
How can I use MBGMCR03 inbound when it has no associated inbound process code bearing in mind that the SAP system is to have no custom developments/modifications? If I have to do some mods what is the minimum that needs to be done either for WMMBID02 to have additional reason code field or for MBGMCR03 to become inbound-friendly?
Thanks in advance for any help!
Jay

More info? In WMMBID02 the field E1MBXYI-GRUND for reason code (as in table MSEG) is there but its text refers to Asset master records. It has only 3 characters allowed and refers to table T098.
The MBGMCR03 field E1BP2017_GM_ITEM_CREATE-MOVE_REAS (data element MB_GRBEW (same as in MSEG-GRUND)) refers to table T157D and has 4 characters and so seems to have no correlation with WMMBID02.
Anyone have any ideas? Can I still use the GRUND field from E1MBXYI?
Jay

On forms central -- can you format fields for phone # and zipcode

is a form is sent out, the data that is returned is non -formated, or if i collect a field called zip code and it has a 0 as the zero is not returned

I realized something - I would recommend that you change the field type for the Zip Code and Phone number fields, I'd guess you are using a "Number field" and should consider using "Text Field".
I have a habit of using "text" fields for zip codes and phone numbers, using a text field the entire string (with leading 0s) is submitted to the response table.
If you use a Number field the leading "0" is stripped out but if you use a text field the entire number entered by the user will be shown in the response table.
Thanks,
Josh

Field Bus. Area is a required field for G/L account company code g/l ac

hi ,
I am getting this following error when trying to post a cenvat in the tcode of J1iEX .
"Field Bus. Area is a required field for G/L account <companycode> <cenvat g/l acct.no.> "
Message no. F5808
Diagnosis
The value for field "Bus. Area" in the interface to Financial Accounting is an initial value but you are required to make an entry in the field selection for G/L account "13113920" in company code "LECS" linked to the field selection for posting key "50".
System Response
Error
Procedure
It might be an error in the configuration of the G/L account field selection. The initial application, used to call up the interface must otherwise define a value for field "Bus. Area". If this is the case, contact the consultant responsible for the application used to call up the interface or get in contact with SAP directly.
Plz help me ..
Regards
Deepa

Hi Deepa,
At Easy access screen :
1.Go to the master account of that G/L (F-02).
2.Check the field status variant defined there.
At Customization screen (SPRO):
3.Go to the master account of that field status variant.
4.Change the status of business area field optional.
Nikhil Garg

Field Cost Ctr is a required field for G/L a/c ...(Co. code) ... (GL a/c)

Hi,
When i run depreciation, i am getting following error:
Field Cost Ctr is a required field for G/L a/c ...(Co. code) ... (GL a/c)
Message no. F5808
Diagnosis
The value for field "Cost Ctr" in the interface to Financial Accounting is an initial value but you are required to make an entry in the field selection for G/L account "4750A" in company code "LT01" linked to the field selection for posting key "40".
System Response
Error
Procedure
It might be an error in the configuration of the G/L account field selection. The initial application, used to call up the interface must otherwise define a value for field "Cost Ctr". If this is the case, contact the consultant responsible for the application used to call up the interface or get in contact with SAP directly.
I checked the field status for GL account and posting key - cost centre is "optional" . Can someone pl. help.
Thanks
Vedavatee

Hi:
Please check in KA03 , enter GL account there and check if this has been created as Cost element. If yes then you will need to enter cost center .KOSTL cost center. This cost center requirement in FI-AA is usually derived from what you maintain in ACSET.
Regards

Error ! No field defined for function Code

Hello ,
I have defined everything correctly but when i try to use the push button to go to next screen this message comes up 'No field defined for function Code' .Please advise .
Thank you ,

Make sure that you put define the name of the OK_CODE field in your screen. Go to your screen,   click on the element list tab. You should have a line which as a TYpe as "OK".   Put the name as OK_CODE.
Now in your program.....you need a DATA statement for OK_CODE, and you need to handle the OK_CODE in your PAI of the screen.
data: ok_code type sy-ucomm.
*      Module USER_COMMAND_0100 INPUT
module user_command_0100 input.
case ok_code.
    when 'BACK' or 'EXIT' or 'CANCEL'.
      clear ok_code
      set screen 0.
      leave screen.
endcase.
endmodule.
Regards,
RIch Heilman

Error ! No field defined for function Code in MENU EXIT

Hello All,
I've created a project in CMOD for the MENU EXIT for handling one menu item in the SAP Standard Menu Bar .
i.e under the HELP MENU Item I've included one more sub menu item.
I've activated the project and I'm able to se the newly added Sub-Menu Item in the activated mode.
But when I press the newly created Sub Menu Item I'm getting a Message in the Status Bar saying :
No field defined for the function code
The Help of it says :
Message no. 00125
Diagnosis
The function code field (OK code field) has not been defined on this screen. If the user selects an application function (not a system function), the system usually provides it in the function code field (OK code field) as well as in SY-UCOMM. This is no longer possible.
System Response
The system is unable to inform the application of the current function code. The application should not use field SY_COMM. This field always contains the code of the last function chosen, which is not always identical to the application-relevant code.
Procedure
You should always define a field for the function code on every screen. The Screen Painter always proposes such a field (OK category), you only need to assign a name and include the definition in the ABAP program.
Please let me know what shud be done ?
Regards,
Deepu.K

Don't use this scanrio ! Instead got Access Key and chamged the Std. Program.

Field status for T-code : CK91

Hi All,
I am trying to load data into CK91 through LSMW.
Can somebody help me to suppress some of the fields in CK91 since I dont have data for those fields.
I basically want to know where the <b>field status has been maintained for the Transaction code CK91.</b>
All help will be appreciated.

Dear KALAM,
1.After entering into LSM Workbench,check in the third step - Manitain Source
fields.Select the field for which you dont have any data and delete it.
2.In the 5th step Field Mapping & Conversion rules,you can select the field for
which you want to maintain default values,and click on constant and assign the
value.For Eg if you are always going to enter the datas for plant 1000,then for field
WERKS,we make the value as contact 1000.
Check & Revert.
Regards
Mangal

Table & Field Name for Tax Code

Hi Guru,
Our Client is looking for 1 report in which he wants Tax code & Its Description as per Sales Order No and Line Item No.
Please let me know How I can fulfill this requirement. Its very urgent.
Thansk in Advance.
Dhanu

Hi
Sales Order Document
Sales document header - VBAK and Sales document line item - VBAP ( VBAK-VBELN = VBAP-VBELN )
The line items comes from vbap-posnr
Billing Document
Billing Document Header - VBRK Billing item Data VBRP link ( VBRK-VBELN = VBRP-VBELN )
Condition Tables related to pricing - KONV
VBRK-KNUMV = KONV-KNUMV
For tax code - konv-mwsk1
For condition type konv-kntyp
if u want account doc then bseg-belnr could be linked
Thanks,
Rajat Kumar Sharma

Urgent:Material Type for Packaging Material in WM and MM

Hi
There is a place in SPRO where i can define the material type for packaging.
Logistics - General -> Handling Unit Management -> Basics -> Define Packaging Material Types
How can i create a material using this material type? What is the use of material type here?
Whenever i create material in MM01/MM41, i get the standard material type list.
Thanks & REgards
Kapil

Hi,
In T.code: OMS2, you can get standard material type list.VERP is the standard material type for packing material.You can copy VERP and rename to ur material type( as it is ur business requriement or else u can use same VERP)
What is the use of material type here?
With the help of ur Material Type , u can craete material like The material type,will be used while defining the material
master.At that time,in Tcode:MM01,first screen we need to
mention,(material type)it show the nature of material
ex:-engineering product,finished products,semifinished
product,etc.,
It also play vital role on material numbering,material type in comination with plant & valuation class, play vital role in inventory & accoputning.
To Create Material,use t. Code: MM01,
Step-1
Enter Material Code: ( example-Polythene Bag, If External Number Range or leave it blnak)
Enter Industry Sector: ...................
Enter Material Type: ..........................(VERP- Packing)
Step-2
Select
Views you required( like eample:basic data-1, like basic data-2,purachsing, purchase order text,General plant data, accounting-1, accounting-2 etc)
Step-3
Enter Plant,
Enter Storage location
{{{Enter Sales organization & Distribution channel(if sales view selected)}}}
Step-4
You will have views like (example-1, basic data, enter Base unit of measure, material group and other details as required field,example-2,Accounting data, enter valuation class, price control; S or V & price)
Step-5
Save.
Note: Before creation material you must know which Industry Sector, Material Type ur going to use and material numbering is internal or external.
For more, check the following link for creation of material
http://www.synactive.com/docu_e/doc_multi_mm01.html
Regards,
Biju K

Field for packaging code

Similar Messages

Maybe you are looking for