Field for selection-generic data source

Hi All,
I have created a generic datasource with 4 fields from VBPA table the fields are
VBELN
PARVW
PERNER
POSNR
and set the delta based on VBELN.
My client want all the fields for slection in RSA3.
Now in RSA3 except VBLN all fields are available for selection.
I tried to select the VBLN field in RSA6 there i can see the selection box is disabled.
Could any one please let me know how i enable this field for selection
Many thanks in advance and pls respond to this as it is very urgent
Thanks
S VR

Hi..
Check whether any one had collected this extractor in Transport.. which is why its in display mode...
And also.. get into change mode in RSA6 for ur DS and then check if u can see that check box is enabled for u?
Let us know the details..
Thanks
Hope this helps

Similar Messages

  • HI,How can i set delta option for costumised Generic data source

    Hi Sir/Madam,
          How can i set delta option for costumised Generic data source.
    Regards,
    Vishali.R
    Please search the forum before posting a thread
    Edited by: Pravender on Aug 15, 2011 1:26 PM

    Hi,
    Go to RSO2 transaction and click on change then on the tool bar click on Generic Delta button. In the next popup you can set your delta.
    Regards,
    Durgesh.

  • How to get Delta field while going for a generic data source

    Hi all,
    We want to create a generic data source for tables involving MSEG,MKPF,SER03,OBJK and EQU by creating a view on these tables.
    fields we are mapping are ...
    MKPF          MSEG         SER03        OBJK       EQUI
    MBLNR        MBLNR       MBLNR     
    MJAHR        MJAHR        MJAHR
                       ZEILE          ZEILE
                                          OBKNR        OBKNR
    Can  any help us out in finding/creating a delta specific field,so dat we do deltas in BW after initial initialisations?
    Thanks all,
    Doug

    HI
    Try to use some time characterstic.
    Generic data will support the following delta's.
    Time stamp
    Calender day
    Numeric Pointer(for exmple doccument number,counter etc)
    regards,
    Chandra.

  • Regarding: Loading data from R/3 To BI for a Generic Data source

    Hi Every,
    Need Help Urgent
    I had created a Generic data source with function Module as the data source, in Rsa3 it is working fine.
    1-> I had replicated the data source to Bi then i had created a info package and then I executed the same. when it is getting the data and it is show in the request monitor (Number of records )  but the status is not changing from Yellow to Green.
    Status in Step by step analysis is every step is green Except "Data selection successfully finished ?"  (RED)
    2-> Then I had seen the Back ground job in Source system which is executing still. I waited for it for a long time but nearly 30 min.
    (I had done Steps one and 2 number of time by activating replicating the data source and so on, but still their is no change in it)
    3-> Then I had canceled that back ground job with the help of BASIS (as i feel that it is something going wrong).
    4-> I feel that their is some thing wrong in the Code of Extractor.
    Please Help...............
    ""Local Interface:
    *"  IMPORTING
    *"     VALUE(I_REQUNR) TYPE  SRSC_S_IF_SIMPLE-REQUNR
    *"     VALUE(I_DSOURCE) TYPE  SRSC_S_IF_SIMPLE-DSOURCE OPTIONAL
    *"     VALUE(I_MAXSIZE) TYPE  SRSC_S_IF_SIMPLE-MAXSIZE OPTIONAL
    *"     VALUE(I_INITFLAG) TYPE  SRSC_S_IF_SIMPLE-INITFLAG OPTIONAL
    *"     VALUE(I_READ_ONLY) TYPE  SRSC_S_IF_SIMPLE-READONLY OPTIONAL
    *"     VALUE(I_REMOTE_CALL) TYPE  SBIWA_FLAG DEFAULT SBIWA_C_FLAG_OFF
    *"  TABLES
    *"      I_T_SELECT TYPE  SRSC_S_IF_SIMPLE-T_SELECT OPTIONAL
    *"      I_T_FIELDS TYPE  SRSC_S_IF_SIMPLE-T_FIELDS OPTIONAL
    *"      E_T_DATA STRUCTURE  ZBI_MATGRIR OPTIONAL
    *Need to get the data only for two Gl account which are fro material purchase while MIGO
    *G/L Account Numbers: 0010502001 0010502002
    data: E_T_DATA1 type table of ZBI_MATGRIR.
      RANGES: R_BUKRS FOR BSIS-BUKRS,
              R_BUDAT FOR BSIS-BUDAT,
              R_GJAHR FOR BSIS-GJAHR,
              R_HKONT FOR BSIS-HKONT.
      DATA: L_S_SELECT TYPE SRSC_S_SELECT.
      STATICS: S_S_IF TYPE SRSC_S_IF_SIMPLE,
               S_COUNTER_DATAPAKID LIKE SY-TABIX,
               S_CURSOR TYPE CURSOR.
    *Declare
      TYPES: BEGIN OF TY_FAGL,
        RBURS TYPE FAGLFLEXA-RBUKRS,
        RYEAR TYPE FAGLFLEXA-RYEAR,
        DOCNR TYPE FAGLFLEXA-DOCNR,
        BUZEI TYPE FAGLFLEXA-BUZEI,
        DOCLN TYPE FAGLFLEXA-DOCLN,
        PRCTR TYPE FAGLFLEXA-PRCTR,
        SEGMENT TYPE FAGLFLEXA-SEGMENT,
      END OF TY_FAGL.
      DATA: GT_FAGL TYPE TABLE OF TY_FAGL,
            GS_FAGL TYPE TY_FAGL.
      IF I_INITFLAG = SBIWA_C_FLAG_ON.
        CASE I_DSOURCE.
          WHEN 'ZFI_GL_M4'.
          WHEN OTHERS.
            IF 1 = 2. MESSAGE E009(R3). ENDIF.
         this is a typical log call. Please write every error message like this
            LOG_WRITE 'E'                  "message type
                      'R3'                 "message class
                      '009'                "message number
                      I_DSOURCE   "message variable 1
                      ' '.                 "message variable 2
            RAISE ERROR_PASSED_TO_MESS_HANDLER.
        ENDCASE.
        APPEND LINES OF I_T_SELECT TO S_S_IF-T_SELECT.
    Fill parameter buffer for data extraction calls
        S_S_IF-REQUNR    = I_REQUNR.
        S_S_IF-DSOURCE = I_DSOURCE.
        S_S_IF-MAXSIZE   = I_MAXSIZE.
        APPEND LINES OF I_T_FIELDS TO S_S_IF-T_FIELDS.
      ELSE.
    Data transfer: First Call      OPEN CURSOR + FETCH
                   Following Calls FETCH only
    First data package -> OPEN CURSOR
        IF S_COUNTER_DATAPAKID = 0.
    Fill range tables BW will only pass down simple selection criteria
    of the type SIGN = 'I' and OPTION = 'EQ' or OPTION = 'BT'.
          LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'BUKRS'.
            MOVE-CORRESPONDING L_S_SELECT TO R_BUKRS.
            APPEND R_BUKRS.
          ENDLOOP.
          LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'GJAHR'.
            MOVE-CORRESPONDING L_S_SELECT TO R_GJAHR.
            APPEND R_GJAHR.
          ENDLOOP.
          LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'BUDAT'.
            MOVE-CORRESPONDING L_S_SELECT TO R_BUDAT.
            APPEND R_BUDAT.
          ENDLOOP.
    *GRIR Inventory (RM/Stores/Spares/FG)   10502001
    *GRIR Services & Others Payable   10502002
          R_HKONT-SIGN = 'I'. "i_t_select-sign.
          R_HKONT-OPTION = 'BT'." i_t_select-option.
          R_HKONT-LOW = '0010502001'.
          R_HKONT-HIGH = '0010502002'. "i_t_select-high.
          APPEND R_HKONT.
    Determine number of database records to be read per FETCH statement
    from input parameter I_MAXSIZE. If there is a one to one relation
    between DataSource table lines and database entries, this is trivial.
    In other cases, it may be impossible and some estimated value has to
    be determined.
          OPEN CURSOR WITH HOLD S_CURSOR FOR
           SELECT BUKRS
                  AUGBL
                  ZUONR
                  BELNR
                  GJAHR
                  BUZEI
                  BUDAT
                  HKONT
                  BLART
                  MONAT
                  BSCHL
                  SHKZG
                  DMBTR
                  WAERS
                  FROM BSIS
                 INTO TABLE E_T_DATA
                  WHERE BUKRS  IN R_BUKRS
                    AND GJAHR IN R_GJAHR
                    AND BUDAT IN R_BUDAT
                    AND HKONT IN R_HKONT.
    Fetch records into interface table.
      named E_T_'Name of extract structure'.
        FETCH NEXT CURSOR S_CURSOR
                   APPENDING CORRESPONDING FIELDS
                   OF TABLE E_T_DATA1
                   PACKAGE SIZE S_S_IF-MAXSIZE.
        IF SY-SUBRC <> 0.
          CLOSE CURSOR S_CURSOR.
          RAISE NO_MORE_DATA.
        ENDIF.
    DELETE E_T_DATA WHERE BLART NE 'WE'.
          SELECT BUKRS
                 AUGBL
                 ZUONR
                 BELNR
                 GJAHR
                 BUZEI
                 BUDAT
                 HKONT
                 BLART
                 MONAT
                 BSCHL
                 SHKZG
                 DMBTR
                 WAERS
                 FROM BSAS
                 into table   E_T_DATA
                 WHERE BUKRS  IN R_BUKRS
                   AND GJAHR IN R_GJAHR
                   AND BUDAT IN R_BUDAT
                   AND HKONT IN R_HKONT.
               FETCH NEXT CURSOR S_CURSOR
                  APPENDING CORRESPONDING FIELDS
                  OF TABLE E_T_DATA
                  PACKAGE SIZE S_S_IF-MAXSIZE.
    append LINES OF e_t_data1 TO E_T_DATA.
    DELETE E_T_DATA WHERE BLART NE 'WE'.
    ENDIF.                             "First data package ?
        DATA: F_YEAR TYPE BKPF-GJAHR.
        DATA: F_PERI TYPE BAPI0002_4-FISCAL_PERIOD.
    IF E_T_DATA[] IS NOT INITIAL.
       SELECT RBUKRS
              RYEAR
              DOCNR
              BUZEI
              DOCLN
              PRCTR
              SEGMENT
              FROM FAGLFLEXA
              INTO TABLE GT_FAGL
              FOR ALL ENTRIES IN E_T_DATA
           WHERE RYEAR = E_T_DATA-GJAHR
               AND DOCNR = E_T_DATA-BELNR
               AND RLDNR = '0L'
               AND RBUKRS = E_T_DATA-BUKRS
               AND BUZEI = E_T_DATA-BUZEI.
             WHERE RYEAR = E_T_DATA-GJAHR
               AND DOCNR = E_T_DATA-BELNR
               AND RBUKRS = E_T_DATA-BUKRS.
         AND DOCLN = E_T_DATA-BUZEI.
    ENDIF.
    LOOP AT E_T_DATA.
          IF E_T_DATA-SHKZG = 'H'.
            E_T_DATA-DMBTR = E_T_DATA-DMBTR * -1.
          ENDIF.
          CLEAR: F_YEAR.
          CALL FUNCTION 'BAPI_COMPANYCODE_GET_PERIOD'
            EXPORTING
              COMPANYCODEID       = E_T_DATA-BUKRS
              POSTING_DATE        = E_T_DATA-BUDAT
           IMPORTING
             FISCAL_YEAR         = F_YEAR
             FISCAL_PERIOD       = F_PERI.
          DATA: V_DOC(6) TYPE C .
          CLEAR: V_DOC.
          V_DOC =  E_T_DATA-BUZEI.
          IF V_DOC  IS NOT INITIAL.
            CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
              EXPORTING
                INPUT  = V_DOC
              IMPORTING
                OUTPUT = V_DOC.
          ENDIF.
         aS PROFIT center is not updated in all the lines in Bsis
          READ TABLE GT_FAGL INTO GS_FAGL WITH KEY  RYEAR = E_T_DATA-GJAHR
                                                    DOCNR = E_T_DATA-BELNR
                                                    RBURS = E_T_DATA-BUKRS
                                                    BUZEI = E_T_DATA-BUZEI.
          IF SY-SUBRC = 0.
            E_T_DATA-PRCTR = GS_FAGL-PRCTR.
            E_T_DATA-SEGMENT = GS_FAGL-SEGMENT.
          ENDIF.
    *As we are using the amount DMBTR in which the amount
    *will be in company code currency that is Local currency
    *group currency always in the main company code currency.
          CONCATENATE   F_YEAR '0' F_PERI INTO E_T_DATA-FISCPER.
          MODIFY E_T_DATA. " from gs_bsis transporting dmbtr fiscper.
          CLEAR: E_T_DATA.
        ENDLOOP.
          S_COUNTER_DATAPAKID = S_COUNTER_DATAPAKID + 1.
       ENDIF.

    Hi,
    Please check the log of same jobs for last week and check is today its taking more time,also check with basis is their any backup initited at same time.
    Moreover until the background job failed automatically its difficult to imagine what is the exact issue.
    Thanks,

  • How to set the delta for existing generic data source

    Hi BW Guru's
    I have a problem,actually i have a exsting generic data source"ZFRBHRCHY". Master data Object ZFRBHRCHY  is getting laoded from all some R/3 Clusters on a Daily Basis. It is full load and takes 4 to 5 Hours, but number of added records(2000) are very less,while total records are more(40Lks).For avoiding this larger load time every day,i want to implement delta extraction for this.
    How to implement this,(i want steps for this) .
    Thanks in advance,
    Regards
    reddy

    yeas agree with sanakar,
    this field which shankar is talking about must be entry date (if u delta timestamp is date, u will also have to mention this table field name in definition of delta), this means that this field will catch last change to the record, so that it will be delta enabled based on the latest change date. This is very important becuase if u use date like posting date to the delta then back dated posting will not captured in to the delta, as delta for this back date is already been done.
    Hope u understand this.

  • How to set delta for the generic data source(FM)

    Hi Guru,s.
    we have created datasource with FM with using templet RSAX_BIW_GET_DATA_SIMPLE  . we want to set up delta for that funtion module.plz send me any templet for delta setup.My mail ID is [email protected]
    Regards.
    hari

    Hi,
       Use the template RSVD_BW_GET_DELTA_DATA instead.
       Or a little bit of coding can be done using the field L_S_SELECT in RSAX_BIW_GET_DATA_SIMPLE to get the Delta records. If your datasource has a timestamp field which can be used for delta settings in RSO2. The last delta timestamp  is captured in the field L_S_SELECT.
    Use this field as one of the selection criteria in your Select statement. This worked in our case and should be helpful if ur delta field is a Timestamp field.
    Hope this helps...
    Cheers,
    Raj

  • Update types in infopackage for generic data source

    Hi,
    Suppose if we create a generic data source,then
    1) What are update types availbale in infopackage for tha generic t data source?
    2) Is there any link between,the selection on the
                               i)  type delta type select
                               ii) the field selected i.e like timestamp,cal month,numeric pointer.
    3)do we have delaa option at info package level?
    I think you understood my doubts.
    Regards
    Naresh.

    hi siva raju,
    yes our's is bi 7.0.but there are two DTP with the same optoion of DELTA.It pull the data from ds to info cube.
    one more thing,how are the delta records picked from the r/3 to bw?its through Infopackage Am i right?
    If possible please tell me the entire flow of data goes for a generic  data source.
    i.e
    how to load data?
    how to set delta?
    how do we load deltas to bw.?
    Regards
    Naresh.

  • Function modules transfer  repeated records in Generic data source

    Hello Friends ,
    I have created a FM to extract the data from fields of  tables BKPF and BSEG .
    This functional module is used in the Generic data source.
    Now if I check in RSA3 for this Generic data source,
    the records are coming 10 times instead of a single time.
    Means one records at data base table is showing ten records in RSA3.
    Any help please.
    Regards,
    Amol.

    Hi Amol,
      Can you please check the Fetch statement that you are using after opening the cursor and selecting data into it. It should be in the format below.
    FETCH NEXT CURSOR S_CURSOR APPENDING CORRESPONDING FIELDS OF TABLE                                                 E_T_DATA PACKAGE SIZE S_S_IF-MAXSIZE.
    Also are you incrementing data package ID or not by using the statement  
    S_COUNTER_DATAPAKID = S_COUNTER_DATAPAKID + 1.
    Regards,
    Prakash B

  • Creating Info Cube from Generic Data source in BI 7.0

    Hi Gurus,
    I have small issue regarding creation of info cube. currently using BI 7.0, I have created generic datasouce in R/3 and same replicated in BI. now i want to create infocube. but bit confused whether it has to be created through DTP or regular method of creating transfer and update rule for cube. your feedback will be highly apppricated.
    Regards
    Kamal Purohit
    INDIA

    Hi ,,
    After done the Genric Datasource in R3, If u want extract that data from R3 to bw side. First we need Replicate the datasource.
    ->> Once datasource has replicated .
    -> We need to assign the datasource to infosource if we are using in 3.5.
    -> if it is BI7.0  after desinged the Cube or DSO.
    -> we need to do transformation  (3.5 transfer rule and update rule we are using that to first assign datasource to infosource).
    -> here we need to map the fields for both DSO & Data Source. (Creating Transformation)
    -> After done transformation we need to run the infopackage . . (Because still data is avialble in datasource if u run the infopackage the data comes from source system to Data source (Here Datasource is nothing but PSA).
    -> still data is available for PSA.
    -> if u want load data from PSA to Target (DSO/Cube),
    -> we need to run the DTP. (When u execute the DTP the data fetches from PSA to data targets.)
    -> still data is available for the Target(DSO)
    If u want to load data from DSO to Cube.
    We need to do the datamartstatus.
    ->->
        When u want to load data from DSO to Cube.
    -> ->Here no need to run the infopackage.
    -> Here we need run the transformation (just for mapping the fields (ODS & CUBE)).
    -> After done the transformation
    -> we need to execute the DTP ....
    once DTP has done successfull the data moved from DSO to Cube.
    Regards,
    Venkat.

  • Generic Data Source issue

    Hi Friends,
    We have Generic Data Source (Delta Capable) which is based on Function Module.
    For this Data source I am looking for
    1) Relevent Outbound Queue Name in SMQ1
    2) Relevent R3 Back ground Job which is responsible for data load from Out Bound Queue To Delta Queue
    3) Relevent Setup Table in R3 system
    4) Is procedure for filling setup table for this generic data source is same as 2LIS Application Specific Data sources?
    Thank you.
    Tony

    1) Relevent Outbound Queue Name in SMQ1
    Generic datasources dont have outbound queue.
    2) Relevent R3 Back ground Job which is responsible for data load from Out Bound Queue To Delta Queue
    No outbound queue hence no job.
    3) Relevent Setup Table in R3 system
    No Setup table for generic datasource.They fetch directly from R3 tables either directly or via function module.
    4) Is procedure for filling setup table for this generic data source is same as 2LIS Application Specific Data sources?
    No set up tables for generic datasources.
    Generic data sources with delta have delta queue only.
    Hope this helps.

  • Delta field not enabled for selection in  generic data source

    Hi
    I have created a generic data source for the table VBFA....and for the delta pick up i have put the delta option as CALDAY on the field ERDAT...and  i have  selected that field for the selection option. but after i made it  delta enabled the selection option got disabled.
    Now when i check the info package delta selection tab that date column is not apperaing.
    But when i have to run the info package for the first i dont want all the data as it has a huge set of data.
    I wanted to  take only this months data.
    So is there any option to be set to enable this selection in info package.
    please suggest.
    Regards
    Shilpa

    Hi there,
    That's the stardard behaviour. If you use delta based om ERDAT, that field won't be available for selecting.
    You could for example try to build a view over VBFA, and let the field ERDAT there and another field, for example ZERDAT (that is just another alias for ERDAT). Create the delta based onyour view over the field (ERDAT), but you can still control the restrictions over the extractore with your ZERDAT.
    I don't know if this is possible, this is only an assumption.
    Another option could be first to create an extractor based on the table VBFA but without delta, that field ERDAT would be available. Do your full data restricting it, and after that, change your datasource to use deltas based on ERDAT. It will be unavailable than, but since you've already loaded previous full data, you could than use your delta like it is. But here, remember, your deltas will bring new and change data based on ERDAT. If it brings delta based on changed data over ERDAT to a record that you didn't brought over your full (only some data), it will be incorrect records.
    Also just an assumption, did not try it.
    Diogo.

  • Field Selection in Generic Data Source

    HI Gurus,
    I created a Generic Data Source for Text master data upload and checked language key as selection so that I can use this field in Info Package on BW side to upload data for a perticualr language. I dont see any field in Data Selection tab of Info package.
    Any help in this regard?
    Thanks

    Hi Raj;
    This is standard procedure...when you have checked the selection on your datasource; you should be able to see the field in your Infopackage. Try to see if you have others column also got checked for example: hide column for this field; if it is uncheck it. Also after you have done this change make sure you save the datasource and replicate it in BW side. Try to crate also a new Infopackage ...just in case.
    Hope this helps.
    BK

  • Issue with Safety Upper limit for CALDAY Field for Generic Data Source

    Hi,
    I have given Upper limit as 1 for Calday field of one of the Generic Data Sources.
    I have got a doubt here.If today's load got failed and I will rerun the load next day.So Will that new run captures all 2 days records.
    Can any one advise me on this.
    Regards,
    K.Krishna.

    Hi,
    A one-day upper safety interval determines that an extraction run today, only fetches records up to yesterday (if the pointer has the day before yesterday date, the extraction comprises from the day before yesterday to yesterday).  This is meant to avoid missing records that were about to be persisted in the database when the delta extraction is running but whose date was determined in memory before the delta started.
    If pointer has today date value and you want to load data from today and yesterday, you should use a lower safety interval.  Take into account that this could reload data previously extracted.  Therefore, only InfoProviders with overwritting features (DataStores or InfoObject master data) should be used as targets of this extractions.
    You can find further details at:
    http://help.sap.com/saphelp_nw04/helpdata/en/37/4f3ca8b672a34082ab3085d3c22145/content.htm
    I hope this helps you.
    Regards,
    Maximiliano

  • Time Stamp Delta field for Generic Data Source

    Hi Experts,
    I have a requirement to create a Generic Data Source based on view. This view on PA0006 and PA0105 tables.
    Will you please suggest me which field i have to take as delta field.
    Thanks In Advance.

    Also, make sure that whenever a new record is created in those tables, field AEDTM is getting updated with system date else you will miss new records in delta unless there is a change in those newly created records.
    Regards,
    Gaurav

  • FUNCTION MODULE CREATION FOR GENERIC DATA SOURCE

    Hi BI gurus,
    I am creating function module for generic datasource. For that I followed below mentioned steps
    Steps
    1.     Created s structure with the fields that needed.
    2. Created FM by copying the standard Function module
    " RSAX_BIW_GET_DATA_SIMPLE " and Give a New name starting With
    Y or Z .
    3. IN SE37 ->Your Function module name -> Change, In table tab given structure
    name by deleting the associated type given in “E_T_DATA “.
    And inserted the required code given below
          PROGRAM 'ZHU_BALANCE'.
    *& Report  ZHU_BALANCE
    TABLES: VEKP, VEPO.
    DATA: BEGIN OF T_DISPLAY,
          DATE   LIKE SY-DATUM,
          EXIDV  LIKE VEKP-EXIDV,
          LGORT  LIKE VEPO-LGORT,
          WERKS  LIKE VEKP-WERKS,
          END OF T_DISPLAY.
    DATA: ITAB_DISPLAY LIKE TABLE OF T_DISPLAY.
    DATA: WA_ITAB_DISPLAY LIKE LINE OF ITAB_DISPLAY.
    SELECT VEKPEXIDV VEPOLGORT VEPO~WERKS
           INTO CORRESPONDING FIELDS OF TABLE ITAB_DISPLAY
           FROM VEKP AS VEKP INNER JOIN VEPO AS VEPO
             ON  VEKPVENUM = VEPOVENUM
             AND VEKPWERKS = VEPOWERKS
           WHERE VEKP~VSTEL = SPACE
             AND VEKP~VEGR1 = '401'
             AND VEKP~VPOBJ = '12'
             AND VEKP~STATUS = '0020'
             AND VEPO~VEPOS = '000001'.
    LOOP AT ITAB_DISPLAY INTO WA_ITAB_DISPLAY.
    WA_ITAB_DISPLAY-DATE = SY-DATUM.
    MODIFY ITAB_DISPLAY FROM WA_ITAB_DISPLAY TRANSPORTING DATE.
    ENDLOOP.
    WRITE:/ 'DATE', 20 'EXIDV', 40 'LGORT', 60 'WERKS'.
    ULINE.
    LOOP AT ITAB_DISPLAY INTO WA_ITAB_DISPLAY.
    WRITE:/ WA_ITAB_DISPLAY-DATE, 20 WA_ITAB_DISPLAY-EXIDV , 40 WA_ITAB_DISPLAY-LGORT, 60 WA_ITAB_DISPLAY-WERKS.
    ENDLOOP.
    While checking the function module it’s populating the syntax error as
    THE TYPE “SRSC_S_IF_SIMPLE” IS UNKOWN. (Though this is commented in program)
    So pls suggest
    Regards,
    praful

    hi indira,
    thanx for ur reply we have created the funcion module successfuly it is also showing the output correct. But when we put that function module in the generic data source and try to extract data in RSA3 it shows the correct output of function module but with the msg ' 0 entries found in customer enhancement' and therfore zero records in the display list.
    is there any correction or steps to be followed in data extraction
    pls suggest
    regards,
    praful

Maybe you are looking for