Field in Field Catalog Not Showing

Hi,
I have added one field in the copied function module 'zzFI_DOCUMENT_LIST_DISPLAY'.
The field 'Cost center description' is there in the field catalog as well as the internal table.
But it does not show up in the alv columns on output.
Requesting your help.
Varun

>
Abhilash.Kuttan wrote:
> Hi Varun,
>
> Can you provide the field catalog options(code) you have provided for this field and also the parameters you have passed for
> 'REUSE_ALV_LIST_DISPLAY'
>
> Regards,
> Abhilash
Declaration of xbseg
DATA: BEGIN OF XBSEG OCCURS 0.
        INCLUDE STRUCTURE BSEG.
DATA: KONTO LIKE RFPSD-KONTO,
      FAEDT LIKE RFPSD-FAEDT,
      KTEXT LIKE RFPSD-KTEXT,
      KTEXT_GL LIKE RFPSD-KTEXT_GL,
      ASSET_TXT LIKE ANLA-TXT50,                      "Note 0435578,
      GL_LTXT LIKE SKAT-TXT50,                        "Note 0446719
      SAKAN LIKE SKA1-SAKAN,
      WAERS LIKE BKPF-WAERS,
      HWAER LIKE BKPF-HWAER,
      HWAE2 LIKE BKPF-HWAE2,
      HWAE3 LIKE BKPF-HWAE3,
* akash *
      LTEXT TYPE CSKT-LTEXT,
*end*
      projk_ext TYPE PROJK_EXT,                        "Note 575107
      COLOR(3),
      COLFW TYPE SLIS_T_SPECIALCOL_ALV,
      END OF XBSEG.
*Field Catalog*
fieldcat_wa-fieldname = 'LTEXT'.
fieldcat_wa-tabname   = 'XBSEG'.
fieldcat_wa-ref_fieldname = 'LTEXT'.
fieldcat_wa-ref_tabname = 'CSKT'.
    APPEND fieldcat_wa TO fieldcat.
ALV Call
    CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
       EXPORTING
          I_INTERFACE_CHECK        = ' '
            i_buffer_active          = c_x                  "ALRK241034
            i_callback_program       = 'SAPLZZF064'
            i_callback_pf_status_set = 'PF_STATUS_SET'
            i_callback_user_command = 'HANDLE_USER_COMMAND'
          I_STRUCTURE_NAME         = 'BSEG'
            is_layout                = layout
            it_fieldcat              = fieldcat
            i_default                = 'X'
            i_save                   = 'A'                 "Note 319936
            i_save                   = l_save              "Note 319936
            is_variant               = variant
            is_print                 = gs_print
            it_events                = events
            it_event_exit            = it_event_exit
         TABLES
              t_outtab                 = xbseg
         EXCEPTIONS
              program_error            = 1
              OTHERS                   = 2.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
              WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
This is my code. I don't understand whats the problem. Request Help.

Similar Messages

Added field in repository does not show in Web UI

Hi,
How do I make a new (added) field to the Catalog Item table in my SRM-MDM Repository showup in the Web UI?
I have added a field 'Interval' to the Catalog Item tabel in my Repository SRM_MDM_Catalog. This field is of type 'Measurment'.
After change I load the reporitory.
When I logon to Config UI for the above repository I do not find the added field as a selectable reporitory field. Only the standard (original) fields show up.
What do I have to dofor my newly added field to show up as selectable repository field in Config UI in order tospecify that it should be displayed in teh Search UI?
Regards
Jan

Dear colleagues,
the same issue solved just restarting all the JAVA components.
There is a SAP note "1028343 - Changes in the repository not reflected in Catalog UI" indicating just one of them but in our case it was not enough. We restarted all the JAVA components and it worked fine.
Kind regards,
Agus.

PSE 11 Catalog not showing up in Catalog Manager

My latest battle with PSE11 is trying to access my catalog in PSE11 via the Catalog Manager but it doesn't show up in the list. The catalog is named My Catalog 2 is located at C:\ProgramData\Adobe\Elements Organizer\Catalogs\My Catalog 2. It is the only catalog I use and is the one that opens up when I launch Organizer. But, for the life of me, I can't get it to show up in the Catalog Manager. The only catalog that shows up is the original catalog which is at a different location and was created when I installed PSE11 on my new computer (Thinkpad W530, Windows 8). I've tried the Custom Location option and browsing to the location, but still no dice. This catalog has thousands of pictures and was converted from my previous PSE6 catalog. How do I get the Catalog Manager to find my current active catalog? I need to do a repair to try and fix another problem I'm having.

This all really started with the migration from my ancient Inspiron 8600 Win XP computer to my new Thinkpad W530 Win 8 computer and at the same time upgrading from PSE6 to PSE11. In the process, I had to move all my pictures (1000s upon 1000s of them) to a different drive letter and main folder location than I was using on my old computer, although I kept the same subfolder structure. This led to all the pictures being reported as missing in PSE11. The reconnection function in PSE11 is not very good (IMO) at handling a situation like this. The way it works, it would take forever and a day for it to search and reconnect all those picture files. I think there was a third-party tool that worked on previous versions of PSE that would let you make mass changes to the file locations, but it doesn't work on the later versions of PSE.
Anyway, I started doing some manual reconnecting and came across a weird situation where a few files wouldn't reconnect saying the file already existed in the catalog which didnt make sense. So, I thought maybe an optimize/repair might fix the glitch. This then led me to the Connection Manager problem. I don't know, maybe all the unconnected files might be causing CM not to recognize the catalog which wouldn't make sense (to me).
Since this situation of having files change location is likely to arise again, I had started investigating perhaps putting together some sort custom reconnect function using a sqlite db tool as you mentioned. I was just hoping to get the files reconnected for now and move on to other things. But, things are seldom simple and straight forward anymore.
I did get My Catalog 2 back to my default at least. I manually deleted the TestCatalog folder and when I launched Organizer, it prompted for a new catalog via CM. But, CM of couse didn't list My Catalog 2. So, I manually launched the catalog.pse11db file via file explorer and Organizer then made it my default catalog again.

List of recent Lightroom Catalogs not showing in the dialog at launch

I have a friend using Lightroom 3 on a Windows 7 PC. She uses multiple catalogs. (one for each client) as do I.
Now when she launches LR the list of recent catalogs is empty. Could this be cleared some where? Why do they not show up and will they start showing up again after she opens different catalogs?
Thanks for any feedback.

If LR uses the Windows recent-files facility, and I’m not saying it does, then clearing recent documents in another area of Windows might have cleared LR’s too. A question back to her would be whether other recent-documents lists have disappeared or only the LR-catalog recent list. The recent-files would be user-profile specific, too, I think, so logging in with a different user would make things look different.
If the LR recent-library-list is something internal to LR and unrelated to the OS, then it could be part of the preferences, and if she reset preferences for any reason, then that might have cleared the catalog list.
If this is on a Mac, then I’m not sure, but I’d expect the OS has a recently-opened-files facility, too, and that such things are tied to the user.
Unless there is some permission problem or corruption that has caused them to disappear, they probably should start showing up, again. It’d be easy enough for her to check, just open LR and open a catalog, then close LR and open LR, again and see if the just-opened catalog shows in the list. If so then there’s probably nothing more to do, except not do whatever cleared the list in the first place, where we can’t really know what she did since we weren’t there.

Some fields from InfoPath form not showing up in Sharepoint

I created an InfoPath form containing a checklist that sends data to an InfoPath document library in Sharepoint 2010.
Most of the fields that I have linked to the sharepoint transfer their data just fine, but 2 of the fields come out blank in SharePoint.
I have attempted the following fixes to no avail:
Created site column and linked to it
Deleted column and had Infopath create a column in the library
The fields are not identically formatted either. Both are single item drop down lists, one is populated by an external data source (sharepoint list) and the other has manual list values. Both fields have other fields in the form that are formatted
identically and work just fine.
help!

Do the choice items match up in the form to the options available in the list?

VSOM 7.5 login fields for user/pass not showing up anymore for some users under internet explorer

Team,
some of my users are experiencing the issue that our russian friend had:
https://supportforums.cisco.com/discussion/12304681/vsom-751-does-not-started-ie11
However we are running the english interface and had no issues for a while (not sure for how long as the users infrequently use the system)
When navigating to the login screen there are no fields for the user to enter their credentials in internet explorer. Tried IE 8 - IE 11. Played with compatibility mode and safe sites etc... without success.
Firefox works without issues and so does chrome for the login.
Anyone run into this issue in the past couple of weeks?

Yeah it is working now, it may have been a reboot Thanks!

The Search field "print.print_printer" does not show in about:config. I cannot reset

When I print from a selection from the web, half of the 1st line is missing. I have 2 printers: HP Officejet 5510 & HP Photosmart 7520. When I print from 5510, the page will also show the "address" at the top & the date/time & page number at the bottom. None of this happened until today.
I have Windows 8
When I print with the 7520, the address & the bottom part are barely printed.
I reset the top margin to 1" from .5 that I had done yesterday when I doing some print jobs, but it did not change the parts that got cut off.
I found a printer problem page on your site & the subject I listed is not available so I can attempt to reset Firefox.
Thanks for your help

Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems?

SAP_FND_TC_T_X1 Catalog not showing up in Launchpad. Please Help

Hi SCN,
Im implementing SAP Fiori Approve Request. I'm on a Hub Deployment.
My problem is I'm not able to see SAP_FND_TC_TX1 Catalog on the Launchpad.
I'm I supposed to create it manually? And the add the tile?
On the other hand I see that I can't find created catalogs on the PFCG of NWG, and yet I do find them on PFCG of ERP, is this an espected functionality?
I have installed UIX01CA1 SPS02 and IW_PGW SPS05 on NWG.
I have given the Role SAP_FND_TCR_T_X1 to my user (on NWG, it does not exist in ERP), and generated authorization objects for ztaskprocessing.
More Info:
Front-End Component/Versions:
Backend Components:

Problem was solved. Some services that were pointed to the ERP had to be directed to NWG:
Service
Before
After
ZINTEROP_0001
ERP
NWG
ZPAGE_BUILDER_CONF_0001
ERP
NWG
ZPAGE_BUILDER_CUST_0001
ERP
NWG
ZPAGE_BUILDER_PERS_0001
ERP
NWG
ZTASKPROCESSING_0001
ERP_WF
ERP_WF
ZTRANSPORT_0001
ERP
NWG

SSIS 2012: Integration Services Catalog not showing data for most recent executions

Techies--
Under a previous deployment of an SSIS package, I was able to go to the Integration Services Catalog, look under the folder-->project--> package then right click and request a standard report for all executions. The report would display
the execution details.
Today a colleague recently deployed a newer version of the same package to a test server... which is failing from a job set up via sql agent. I went to look at the root cause by going to the Integration Services Catalog to review the report. No execution
data appears. I looked at the filter--compared it to the filter I have set on the production copy of the stable version. The folder name, package name and project name match. Both have a status of 'All'. The date range is the same (2/19 - 2/25).
In fact, I went back to the test deployment and changed the date range to the date of the last failure (1/30). Now I see data only from 1/30 but none for today's execution.
Something must have happened in the deployment process--but what? How do I debug this issue with the reports--but even more importantly, how do I get to the raw execution data to see what the story is on the failed execution itself?

@Arthur, thanks for responding. In a nutshell, I searched through the ssisdb.catalog.event_messages table to determine roughly the same thing you determined--an execution for that package (or for that matter, any misnamed package) with today's timestamp
simply never occurred--even though the job agent log appeared to indicate it had.
I re-deployed the package ... forced an execution with an interactive run from the catalog... and viola! The execution info appeared through the standard reports as expected.
Any idea where I could/should look for a wayward deployment? (BTW, the report for validations showed no data either on that first deployment).

Catalog not showing up - lrcat.lock file ??

hi. it seems as though lightroom may be corrupt. i really have no idea - please help! this morning i was working in LR. everything was fine. i shut the computer down as i normally would and i just came back to an empty LR. when i open it, i backed up but then no catalog appeared. nothing. when i tried to open recent, as well as several back ups, nothing will appear. most of the menu options are light grey, meaning you can't access them (e.g. import file, open recent, the catalogs are light gray, i can't even see "about adobe ps lr"). what is this? when i try opening a back up, nothing.
i also notice a file that comes up when i try to open a backup. it's the same name but ends w/ lrcat.lock
please help!!
april

With LR closed is there a Lightroom Catalog file in the pictures>lightroom> folder? is there also a lrcat.lock file there? If there is the .lock file there delete it.
If there is a Lightroom Catalog file still there double click on it to see if LR opens.
I have never had to utilize a back up file to recover so not sure what you need to do to recover from there, maybe someone else can advise.

OIM Catalog not show AD AppInstance

In Oracle Identity Manager 11.1.2 with connector Microsoft Active Directory User Management Release 11.1.1
I installed this connector, and I created the Application Intance and this is not shown in the catalog.
I already run scheduled task "Catalog Synchronization Job".
Thanks.

remove the "Updated Date" in the scheduled job and run again

Field Explorer in Crystal Reports does not show the same names as Bex Query

Hi
I have crystal reports, I can retrieve data from BW Bex Query. But in the field explorer it does not show the names as in the Bex query designer.
In the Bex query designer a field will have the following technical name 0Debitor and the description is Customer.
It shows in crystal reports in the field explorer twice as D[0DEBITOR]D and D[0DEBITOR]D. It also does not seperate key figures and characteristics.
I would like it to display the field explorer as shown in this blog.
/people/ingo.hilgefort/blog/2008/02/19/businessobjects-and-sap-part-2
Thanks in advance

Hi,
take a look here:
/people/ingo.hilgefort/blog/2008/02/19/businessobjects-and-sap-part-2
make sure you are using the MDX Driver and what happens is that you will see several fields per characteristic. example: one for the key, one for the description, several if modelled for the display attributes
Ingo

Records Not Showing Up On Report

I'm using Crystal XI
I can take the query from "Show SQL Query..." and paste it into a query screen in SQL Server 2008 management studio and retrieve the correct records. However, the report itself does not contain all the records the should have been returned.
To the best that I can figure, the records where a transaction date (date/time field) is null is not showing up on the report. I only display the field, do not do any calculations based on the field.
It is part of the record selection formula, where I test for the field to be between start/end parameters or is null (which produces the correct SQL query as I stated above)
So why are the records not showing up on the report, and more importantly, how do I get them to show up?
TIA

It already was set to "Exception for Nulls"
On the other hand, just on a whim, I tried reversing the order of the query from what it was:
{MyQuery.Company = {?Company}
    And
    {MyQuery.Transaction_Date} In {?Start/End Date}
    Or
    IsNull({MyQuery.Transaction_Date})
To:
{MyQuery.Company = {?Company}
    And
    IsNull({MyQuery.Transaction_Date})
    Or
    {MyQuery.Transaction_Date} In {?Start/End Date}
And that seemed to work. I'm not sure why it will work in the Mangement Studio, but not in Crystal Reports, but at least it works.
Thanks for the tug in the right direction.

Requirement Urgency in ME21 not showing up

Somehow the field - Requirement Urgency is not showing up in ME21 tcode after we executed our config steps (SPRO -> Materials Management -> Purchasing -> Purchase Order -> Define Screen Layout at Document Level ).
We did the same thing in ME21N and the field is being displayed with no issues.
Any help is appreciated.
Thanks.
Romeo

Hi,
Check the below Field selection settings.
SAP IMG > Material Management > Purchasing > Purchase Order > Define Document Type. Over here check on the Field selection for the Document type .
You have set the field selection to below all types. below i mention the how the field selection rule apply in SAP.
AKTH
ME21N
ME21
NBF
Field selection rules:
+ For mandatory fields
. For optional fields
For display fields
- For suppressed fields
Link rules for field selection keys
    Field selection key 2
     + . * -
Field selection key 1
+     + + * -
.     + . * -
SAM
Edited by: Saminathan Gopalan on Jun 25, 2010 11:30 AM

Custom movement type not showing up in pull-down menu

Hi all,
I created a custom movement type to transfer QI stock in one plant to QI stock in another plant. The movement is working correctly in MIGO by choosing transfer and then entering my custom movement type into the movement type field; however, it's not showing up if you just do a pull down. You must enter it manually for it to work. Does anyone know what I missed on the setup that's making it not show up in the list?
Thanks!

go OMJJ and maintain the help texts to youor movement.

Field in Field Catalog Not Showing

Similar Messages

Maybe you are looking for