Field not hiding upon changing screen no of infotype

Hi SAP Gurus,
I've an issue for which i need your expert opinion.
I am working on international environment and my issue is that I have to change screen no in table V_T582A Infotype Attributes. Lets say i've changed the standard screen 2000 to 2006 because the screen was not bringing the exact entry date even after maintaining ENTRY feature. Therefore I had to go for Screen 2006. In table V_T588M I have chosen the module pool for IT0016 and in the alternate screen with variable key 12 I have selected certain fields to be hidden and also i had changed the feature P0016 even accordingly where i had mentioned the variable key 12 to be used for country grouping 99.
After performing all the above configuration steps, i am still unable to hide any field.
Kindly help me. Your help will be really appreciated.
Thanks,
Irfan Malik
SAP HR Consultant
SIEMENS Eng. Co. Ltd. Pakistan

Hi Naim,
Basically the data in Infotype in which you are changing the record doesn't exist.
That is the reason you are receiving the message in RETURN " NO DATA STORED FOR 0003 FOR SELECTED PERIOD"
If you want to see online where exactly the problem lies....Just put the Break point and also dialog_mode in FM as "<b>1"</b>
CALL FUNCTION 'HR_INFOTYPE_OPERATION'
EXPORTING
INFTY = '0003'
NUMBER = PERNR
VALIDITYEND = i0001-BEGDA
VALIDITYBEGIN = i0001-ENDDA
RECORD = i0001
OPERATION = 'MOD'
TCLAS = 'A'
DIALOG_MODE = '<b>1</b>'
NOCOMMIT = 'X'
IMPORTING
RETURN = I_RETURN
Reward Points for helpful answers.
Thanks.
hari krishna.

Similar Messages

  • QM03-Custom tab-Change to text field not reflecting-FG - XQQM-screen-0106

    Hi,
    I have a requirement to change the text field on a custom tab of QM03 transaction. Quality notification type is Z1 and the tab is "Checklist". Both are custom defined.
    The existing text field is of 3 lines. The new text message is of 8 lines. When I did the changes on the custom screen 0106 in the function group XQQM, the changes are not reflected on the QM03 transaction's custom tab. Only first 3 lines were reflecting the change and rest of the 5 lines are not appearing on the screen.
    Pointers on this will be definitely helpful.
    Regards,
    Mallika.

    I had a similar problem, but it was with the message line. I found that with Web Forms, I had to issue the Synchronize; a second time, but in Client/Server Forms 6i, the first synchronize worked. Here is the code I used:
    <pre><font face = "Lucida Console, Courier New, Courier, Fixed" size = "1" color = "navy"> SYNCHRONIZE;
    if Get_Application_Property(User_Interface) = 'WEB' then
    synchronize;--first does not work on web
    end if;</font></pre>
    Let us know if this works.

  • Problem with adding new field to the mass change screen in FBL5N

    Hi,
    We have a problem with adding the field XREF3 to the mass change screen. We followed steps described in the SAP Note 640908, but the result is that when we try to mass change some documents in FBL5N and enter some values in the mass change screen, a message appears: "Please enter at least one new value" and nothing is changed.
    If you have faced with such a problem, we would be grateful if you give us some tips.
    Regards,
    Miłosz Włodarczyk

    The problem has been resolved: we didn't activate a code in SE80.

  • Customer Hierarchy field not showing in change customer master

    Hi all,
    We are trying to upload customer master Hierarchy field A and Customer Number  in XD02 But Customer Hierarchy field not displaying in XD02 i check in account group OBD2 and OB20 setting its showing optional entries only still its not showing in XD02 But while creating customer master in XD01 its showing
    can any one guide me where i need config
    Thanks
    Rajesh

    Hi,
    You check out in OBD2 & in OB20,
    R u selected right account group in OBD2, check it.
    Kapil

  • Field not displayed in wd screen

    Hello Experts,
    I have enhanced a standard webdynpro screen and added new z attribute in the context and also added an input field in the layout. When I create a binding for this input field to the z attribute in the element properties the field does not appear during runtime.
    For testing I changed the binding to a standard attribute already existing in the context and then it works fine.
    Is there something i am missing here due to which the field is not shown during runtime when the binding is done to a z attribute in context?

    - what WD are you enhancing ?
    /SAPSRM/WDC_DODC_SC_I_DES, View V_SC_DOFC_I_DESCRIBE
    - what TYPE are you using for your attribute ?
    The attribute is of type CHAR 32.
    Z Attribute from structure /SAPSRM/S_CLL_WD_SC_I_BD, the attributes are originally added in INCL_EEW_PD_ITEM_CSF, INCL_EEW_PD_ITEM_CSF_SC
    - have you created a node for this attribute as well ?
    I have added the attribute to the existing node, right click on the existing node, create using the wizard-> Attributes from component of structure.
    - what UI element are you creating ?
    Input_Field
    - I'm assuming that all of this is done at DESIGN time and not at RUNTIME, am I right ?
    Yes during design time.
    I have also disabled the BADI for WDMODIFYVIEW related changes but its still the same.

  • Master-detail: detail field not displayed after changed by master field

    I want to use the Depends on item with Clear/refresh value functionality in a master detail situation. Within the same group it is no problem to use the setter method of a field to change a second field and then displaying this new value. But in the detail group, I can not select items from the master group as a depends on item.
    In the setter of the master field, the value in a field for each row in the detail (table layout) is updated. The only problem is that this updated value is not displayed, the old value doesn't change. When saving the changes, the displayed value is committed to the database. When de updated field is not displayed at all, the correct value is saved, so I know the detail field is updated.
    How can I make sure the displayed value in the detail is displayed after changeing a master field? I already gave the detail field the correct partial trigger.

    Wouter,
    I guese you don;t see the changed value when you display the detail item because after the depends on item update changed the detail item, JSF procesing continues and the detail table changes are sent to the server which will override again the detail item attriibute, resetting it to the old, still displayed value.
    So, the trick is to get PPR working. Make sure the partialTYriggers property of the detail item is set to the value of the id property of the master item. If it still doesn't work, try setting the partial triggers property on the table, instead of the individual item.
    Steven Davelaar,
    JHeadstart team

  • IPhone 3g - I have to power down to change screens.  The button is not working.  What do I do?

    The button on my IPhone 3G is not working to change screens.  I have to power down every time I want to change screens say from phone to the facebook app.  I've tried cleaning out the connection with an air blower.  It did seem to help at first but now, nothing helps.  Thanks for any and all help you can give me to try to solve this issue.

    Try resetting the SMC.
    MacBook and MacBook Pro with a battery you can remove
    Shut down the computer.
    Disconnect the MagSafe power adapter from the computer, if it's connected.
    Remove the battery.
    Press and hold the power button for 5 seconds.
    Release the power button.
    Reconnect the battery and MagSafe power adapter.
    Press the power button to turn on the computer
    To reset the SMC on newer Mac portables with a battery you cannot remove
    Shut down the computer.
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer.  
    Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.

  • Cost Center field in ME55 Report (Change Layout)

    Hi all,
    In ME55 (Collective Release for PReq) Cost Center is available as one of the "Selection fields", but it's (Cost Center field) NOT available in Change Layout Function (after you execute the report).
    The requirement is the user want to see the Cost Center field in the ME55 report layout instead of having to drill down to each PR to see the Cost Center assigned to the PR Account Assignment.
    Since Cost Center field in NOT available in the Change Layout function of ME55, How do I add it to the layout? Do I need enhancement? If so what do i need to do?
    Thanks in advance

    Hai,
    Please copy the RM06BF00 into zRM06BF00 & take help of your software engineer/abaper for modification of this program for adding cost center in the output.
    With Regards,
    Jaheer.

  • ALE/IDOC-How to create Change Pointers for Custom Infotype

    Hi,
    My requirement is to transfer custom OM infotype changes using IDOCs.
    But its not creating any change pointers for that infotype.
    The message used is a copy of standard message OM_HRMD_A.
    Can any one please help me out in this issue.
    Thanks,
    Sarika

    Hi Sarika,
    How did you solve this issue? We are also facing a similar problem, it will be helpful if you could explain how you found out the solution.
    Thanks
    Anu.

  • Field BSEG-MANST. does not exist in the screen SAPMF05L 0301 in mass update

    Hi,
    I am trying to perform a mass update of dunning data (level and date) on some open items. Using the mass change function through FBL5N, I receive the error message, and the update is not performed. I cheched with the layout editor, but the fields appears in the mentioned screen. The field is also allowed for modification in customizing, for the company code. I was not able to find the dunning fields in the field status editor, in customizing.
    Any hint?
    Thanks
    Massimo

    thanks, but it doesn't apply.
    More relevant is note 322163 Line items: mass change 'Payment Method' BSEG-ZLSCH, but this refer to a program error, our release is more recent, and, furthermore, the dunning fields aren't available for change in FB02.
    Regards, Massimo

  • ESS custom fields - data entered in ESS screen is not saved in SAP record.

    I am working with an ABAPer on the BAdI HRPAD00INFTYUI. We are trying to make a few customer Z* fields avaialble on ESS for IT0021. We followed the document posted at
    https://www.sdn.sap.com/irj/scn/wikipath=/display/profile/ESSPersonalInformationUIenhancementwithoutmodification
    I managed to make the fields visible on the iview as per instructions from document at link above (I don't know much about portal config).
    Problems we have:
    When I enter data in the custom fields on ESS and press Review button the custom fields no longer show. In addition, the data record does not save the information entered in these custom fields.
    Cannot figure out how to change the order in which they appear on the screen. They are not in the same order that they appear on the 'Edit custom extension fields' screen where I made them visible.
    Any input is appreciated.
    Thanks,
    Nicoleta

    Hi,
    I think there are a few tasks that you can try to solve your problem (if you haven't already)
    - First you will have to repeat the personalisation steps that you performed (on the initial portal i-view screen) in the the review screen to get the fields to display on this screen.
    - to get the fields to update you will need to add them to the view V_T588MFPROPC or possibly V_T588MFPROPS though this table should be for SAP namespace
    - You may need to check your code in the INPUT_CONVERSION method of the BAdI
    Hope this helps
    Andrew

  • Problem: Not able to change Signature field reason code Dynamically using signatureSetSeedValue

    Problem: Not able to change Signature Settings Dynamically.  
    What I want: Need to change the Signature Field Reason code Dynamically upon selecting Radio Button.
    Here is My Code:  
    var mydoc = xfa.resolveNode("FormData.P3_443.signature[2].ePadSignatureField3");
    mydoc.signatureSetSeedValue(
    reasons: ["Advisor"],
    flags: 8
    Error Message:
    TypeError: mydoc.signatureSetSeedValue is not a function
    9:XFA:FormData[0]:P3_443[0]:signature[2]:ePadSignatureField3[0]:validate'
       Source Code: Acrobat Code for Signature.
       // Obtain the signature field object:
    var f = this.getField("mySigFieldName");
    f.signatureSetSeedValue(
    { reasons: ["This is a reason", "This is a better reason"],
    flags: 8

    Problem: Not able to change Signature Settings Dynamically.  
    What I want: Need to change the Signature Field Reason code Dynamically upon selecting Radio Button.
    Here is My Code:  
    var mydoc = xfa.resolveNode("FormData.P3_443.signature[2].ePadSignatureField3");
    mydoc.signatureSetSeedValue(
    reasons: ["Advisor"],
    flags: 8
    Error Message:
    TypeError: mydoc.signatureSetSeedValue is not a function
    9:XFA:FormData[0]:P3_443[0]:signature[2]:ePadSignatureField3[0]:validate'
       Source Code: Acrobat Code for Signature.
       // Obtain the signature field object:
    var f = this.getField("mySigFieldName");
    f.signatureSetSeedValue(
    { reasons: ["This is a reason", "This is a better reason"],
    flags: 8

  • Field BSEG-HKTID. does not exist in the screen SAPMF05A 0332

    Dear ALL,
    Our client is ECC 6.0
    we are facing a problem while posting the park document
    Field BSEG-HKTID. does not exist in the screen SAPMF05A 0332
       Message no. 00349
    Diagnosis
       The specified field does not exist on the screen.
    Procedure
       Check your batch input data.
    The above problem occurs only after the Patch level upgradation only.
    SAP suggest refer your sap note 953374 House bank details : account id in the document.
    It says activate the RE-FX component.
    Any how we are not in the real estate business.
    Please provide me your suggestion to resolve the problem.
    Thanks for your cooperation
    Regards,
    laxminarayan

    To do the same change with the transaccion FB02 y FB03, create an enhancemente point in the program: SAPMF05L dynpro: 1301, module: DYNPRO_MODIFIKATION, at the of perform open_fi_dynpro_mod and write:
    LOOP AT SCREEN.
      IF sy-tcode = 'FB02'.
        IF screen-name = 'BSEG-HKTID'.
          screen-input = 1.
          screen-invisible = 0.
          screen-active = 1.
          screen-output = 1.
          screen-group4 = ' '.
          MODIFY SCREEN.
          EXIT.
        ENDIF.
      elseif sy-tcode = 'FB03'.
          IF screen-name = 'BSEG-HKTID'.
          screen-input = 0.
          screen-invisible = 0.
          screen-active = 1.
          screen-output = 1.
          screen-group4 = ' '.
          MODIFY SCREEN.
          EXIT.
        ENDIF.
      endif.
      ENDLOOP.
    and, all ready.

  • Field KONP-KONWA. does not exist in the screen SAPMV13A 0201

    Hi,
    We have one BDC program to change Material Inforecord through transaction ME12. We have executed the BDC and Batch input session got created. When i execute the session, it is giving error "Field KONP-KONWA. does not exist in the screen SAPMV13A 0201 "
    But when i checked in SE51 for Program SAPMV13A and screen 0201, field KONWA exist.  I have checked in Transaction ME12, this field exist in the same screen. But still this error message is appearing.
    Is there any something wrong in BDC program.

    How are you handling the subscripts (row numbers)?  Did you actually record this BDC in SHDB, or just try to write it?  If not recorded, do yourself a favor and ALWAYS record your BDC sessions, then write to match that recording....
    chances are you need to refer to KONP-KONWA(nn) where nn is the row number in the table control....

  • Infotype Screen control - change field from display to change

    Hello,
    I have a field in a custom infotype, which is showing up as only display. I want to change it so that values can be input. I checked the screen layout in se51 and found that the field is checked as input possible field. There is no entry for this infotype in T588M. I am not sure, where else should I look so that i can change to field to take the input. Please suggest.
    Thank you very much !
    Rush

    Hello Everyone,
    I checked in Module pool Program. The program is written to check the field for some personnel areas. Now, when i did debug, I found that PSYST-werks is not read correctly. Suppose if there are 3 records in infotype 0001, its getting the first record value, not the recent record value. Any suggestions how to change the code, so that the PSYST get the recent record value?
    Sikindar, T588M do not have entry for this table. thank you.
    Jayanthi thank you for your help too.
    Rush
    Edited by: rushi K on May 13, 2008 4:15 PM

Maybe you are looking for