Fields are getting truncated

Hi,
I am doing re-development,while doing data loading I am getting some fields value truncated but as i had checked the transfer rule and update rules are all mapped correct and the field lengh is also correct .
Like our Company Code is 1000 and in the new development PSA that value is comming to be only 10.
Thanks

Hi....
there are no routines present in update rule as well as in transfer rule.
Thanks,
Pooja
Edited by: Pooja Bhandari on Feb 18, 2009 7:23 AM

Similar Messages

Not all fields are getting updated in transformation

Dear all,
Please help me in the following issue:
I have the following scenario:
DSO1 and CUBE1. From DSO1 to CUBE1 I have transformation. Fields are mapped one to one.
Some of the fields are getting updated in transformation (22 fields) and some of them are not updated in transformation. (2 - storage location and steel grade).
The fields exist in DSO 1 but don't go into cube.
I did the following:
1. deleted transformation and dtp, recreate = > not working
2. copied the cube, and create new transformation and DTP...not working.
Any help would be appreciated
Thank you
Ramona

Hi Ramona,
Storage location (standard infoobject 0STOR_LOC) has plant as compunding object, check whether this is the issue ? (may be check with Steel grade infoobject also).
Else, do some RSRV checks on the DSO and Infoobject, if it doesn't bring up any issue, raise a message with SAP.
Check your BW Support Pack level , is it the latest ? Give more details about the scenario ?
Cheers,
CK

Some fields are getting hidden in contract..

Hi All,
I have a problem while creating contract in ME31K.
Start of Validity period validity period end fields are getting hidden in ME31k.
Field selection group for the contract document type is WKK and these fields in this group are 'required entries'.
I don't understand how come these fields are disapearing in contract..
Can anybody please figure out the problem...
Thanks in advance
Raju

Hi,
In ME31K, these date fields will be usually not showed on the initial screen. While creating contract, after entering vendor, agreement type, agreement date, organizational data, we will be taken to the next screen where in we need to fill validity start date and end date.
In ME33K we can see this information under Header - > Details menu path.
If these dates are not available in the details tab, you might need to create a transaction variant from "SHD0" transaction. Please check under details tab and if not available create try to create a transaction varaint.
Hope this helps you !!!
Regards,
Ganga

Fields are getting displayed two times in alv grid

Hi experts,
I have developed an interactive alv.
in basic list i have given two push buttons.
if first button is selected it should display one list and second button is selected another list.
I am displaying all the three lists using the FM 'REUSE_ALV_GRID_DISPLAY'.
my problem is if select any of the button it is displying the data correctly,
but if I come back to the basic list and click on the same button it is displaying each field two times(in two columns).
and if click the same button third time it is displaying the fields three times(3 columns).
can anybody tell me how to avoid this.
Thanks,
Sudheer

HI,
It seems like REFRESH of internal tables is missing. Please check and correct.
Thanks,
Vinod.

All fields are getting displayed in the output (ALV)

Hi i have declared an Internal table as folllows -
DATA: BEGIN OF itab1 OCCURS 0,
vbeln type vbeln,
bstnk like vbak-bstnk,
erdat like vbak-erdat,
kunnr like vbak-kunnr,
char type c ,
END OF itab1.
and reading data from table VBAK and filling the internal table..
but when i m displaying data i give the internal table name in the 'reuse grid' function' and structure name 'VBAK'..
in the ouput it is showing all the fileds of VBAK,,wht to do?

hi,
Make sure you have passed the reference table also as itab1 and NOT vbak.
Also U need to pass the Field Catalog filled in. IT_FIELDCAT parameter.
In FM REUSE_ALV_FIELDCATALOG_MERGE ->
the parameter I_INTERNAL_TABNAME should be set to itab1 and NOT vbak.
Regards,
Vivek.
**->Reward points if helps.

Data carrier & application field are not getting displayed in CV04N

Hi Guru's
In TCode : CV04N, data carrier & application field are not getting displayed.
While i compare with my IDES system, data carrier & application fields are getting displayed in CV04N.
Let me know is there any configuration that has been missed out.
Regards
Bhanu

Hi Bhanu,
Please note that the fields 'Data carrier' & 'Application field' are visible only if no document type is entered.
Suppose you enter a document type and press ENTER then these fields disappear. This is because the field 'Application' was designed when only the storage is archive, vault or SAP-SYSTEM was possible and the number of added originals was limited.
Currently DMS allows storage of originals on Content Server and there is no limit on the number of added originals, the system behavior was changed due to performance reasons. To avoid performance problems if you search for a document with a lot of originals attached this field gets invisible if you enter a document type which uses the KPRO storage.
Regards,
Pradeepkumar Haragoldavar

Field values directly binded to backend service are getting cleared.

Hi,
In HCM Forms & Process, for ex: in a form the header field values are directly binded to SAP_PA backend service and rest of the fields (dropdown list and free text fields) are getting from custom generic service. Now there is also a pushbutton in my form is used to calculate percentage of a field. Now when the form is displayed by default the header values are getting populated from SAP_PA backend service. When I click the push button with out selecting values(drop down list) getting from generic service all header field values are getting cleared. But if I select any dropdownlist value before selecting pushbutton and then if I click pushbutton all the header fields are retained with values. I am facing this problem for all the forms that I developed. I am looking for valuable answer.
Regards,
Nayani .

So you are or are not using a user event? Sounded like you were which was firing when the user selecpiushed the "button" for calculating fields. Whatever "event" you have tied that button too seems to be your culprit. Are you doing this calculation in Javascript off the button "onClick" even or passing it to a HCM P&F "user event" in the backend? If it is to a HCM P&F "user event", that's where I would make sure your fields are selected.
From the sounds of it, it seems when you do NOT select a dropdown list value, your generic service is not handling this gracefully and an error occurs. That would cause ALL other services NOT to run. It's an odd thing the framework does and often very frustrating to hunt down, but whenever any service errors, it will not run others.....hence no fields coming back correctly....even if those other services have NOTHING to do with yours (weird, I know).
Hope this helps.

Problem in download to application server- file column is getting truncated

We have a program for which there are 2 options a list output or file to be placed on the application server. The TXT file is of length 525 characters.
My problem is while the list output is generated the whole list is getting outputted, but when we take a output on the application server last 10 columns are getting truncated.
Can somebody give a help on this.
Thanks in advance.
Jilly

Use the function module
ARCHIVFILE_SERVER_TO_CLIENT
Pass the values: as download file and destination in the respective fields.
File to be downloaded in :(Pass the exact file name)
PATH :
SDEC01\SAPMNT\INT\HR\OUT\FMLA-20080205-0728
and
Destination to download the file in:
TARGETPATH C:\DOCUMENTS AND SETTINGS\JILFEM\MY DOCUMENTS\FMLA-20080205-0728
Regards,
Jilly

R3 to CRM direction - BDOC - Email address getting truncated on BP

Hi,
Customer details are being tranferred to CRM from R3 using BDOC.While doing so the Email address field is getting truncated to 40 Chars (if it is more than 40). This only happens when the Customer is changed in R3 and then BDOC is sent to CRM (change in Email ID) , But when the customer is sent to CRM for the first time (new customer created), the Email ID is getting populated properly (no truncation).
Can you please help me in the issue.
Thanks in advance,
Vivekanand

Prasenjit,
Your first two suggestions seem to work fine. I know have a link that I think is raising an event.
CASE iv_property.
WHEN if_bsp_wd_model_setter_getter=>fp_fieldtype.
      rv_value = cl_bsp_dlc_view_descriptor=>field_type_event_link.
WHEN if_bsp_wd_model_setter_getter=>fp_onclick.
      rv_value = 'toemail'.
endcase .
Here is my hardcoded event handler but it dumps with a FRONTEND_ERROR ( sy-subrc = 2 )
method EH_ONTOEMAIL.
* Added by wizard: Handler for event 'toemail'
CALL FUNCTION 'CALL_BROWSER'
EXPORTING
   URL                          = 'mailto:hardcodedemailaddress'
*   WINDOW_NAME                  = ' '
*   NEW_WINDOW                   = ' '
*   BROWSER_TYPE                 =
*   CONTEXTSTRING                =
* EXCEPTIONS
*   FRONTEND_NOT_SUPPORTED       = 1
*   FRONTEND_ERROR               = 2
*   PROG_NOT_FOUND               = 3
*   NO_BATCH                     = 4
*   UNSPECIFIED_ERROR            = 5
*   OTHERS                       = 6
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endmethod.
But when I call CALL_BROWSER through se37 it worls fine and brings up my outlook client.
Any ideas ?

Leading zero getting truncated in .CSV format GUI_DOWNLOAD

Hello experts,
I am trying to download the data using GUI_DOWNLOAD in .CSV format but the leading zeros are getting truncated. For instance Company code 0001 is displayed as 1 in the CSV File. But when I open the same file in notepad I am seeing 0001. Is this a known issue or this is how .CSV format should be?
I have gone through some threads in SDN but they are not helpful.
Your expert advise is much appreaciated.
Thanks
Abdul Hakim

That is how excel displays values like 0001. It interprets them as a number and removes leading zeros.
If you don't want this happen and you want excel to treat them like text, you need to append a quote at the beginning of the token like '0001
You can use concatenate like below to append a single leading quote
field = '0001'.
CONCATENATE '''' field INTO field.

Quantity fields not getting displayed in the second total row

Hi,
As per the requirement I have to display 2 total rows for an ALV report using CL_GUI_ALV_GRID. I am able to get the first total row properly using method get_subtotal(). However for the next total row only the character fields are getting displayed and the quantity fields are coming blank.
The second total row will have different values based on a formula.
Please help me out in resolving the issue.
Thanks,
Abhishek

You can provide first row as the SUBTOTAL and next row as the TOTAL.
Get one extra column on which you can do the SUBTOTAL.
Regards,
Naimesh Patel

Fields not getting updated in the database through BAPI enhancement

Hi Experts,
I have added 4 custom fields in the transaction FB60. The fields are getting displayed in vendor line item.
I have to fill these fields from an inbound idoc which uses the BAPI_ACC_DOCUMENT_POST bapi. I have implemented the BADI BADI_ACC_DOCUMENT to pass my custom fields to the bapi and it is processing correctly by adding the custom field values to the extension table that is getting passed to the standard program of the BAPI from the BADI.
But I think, I have missed to append my fields in one of the standard structures. I have added the fields in BSEG, CI_COBL( which is getting called in BAPICOBL_CI, ACCIT).
Can anybody tell me which other standard structure I should add my custom fields so that it functions properly and gets added to the BSEG table.
Regards,
Sangeeta.

Solved on own.

Application server file values getting truncated

Hi,
I'm sending a file to Application server with minimun 1800 characters in a singlw row. The file is getting uploaded into the server but with only 255 chars in the same row. All others are getting truncated.
Can anyone please suggest on this?
Thanks
Itishree.

Hi,
You can download your file from application server using CG3Y.
And upload your file to application server using CG3Z.
I think just a typo mistake by the one who answered before me.
Regards,
Bharati Singh

ALV Header getting truncated in excel

I am using the GRid Layout. but when i am downloading the output in the Excel sheet, the headers are getting truncated.
I have tried increasing the width in the FIELDCAT and also removing the coulmn-optimze option in the layout also. but still after trying the headers are getitng truncated.
Any pointers how can i download without the headers getting truncated.
Thanks

Refer the code snippet:
Follow this way:
CONSTANTS : c_delim TYPE c VALUE cl_abap_char_utilities=>horizontal_tab.
data :it_excel_dwnld TYPE STANDARD TABLE OF t_zzidwnld_data     ,
       wa_excel_dwnld TYPE t_zzidwnld_data .                      .
   CONCATENATE   'Physical Inventory Document'
                'Item '
                'Material '
                'Material Description'
                'Material Group'
                'Plant'
                'Sloc'
                'Doc Date'
                'Book Qty'
                'Counted Qty'
                'Value of Phy Inv Count'
                'Standard Price'
                'Difference Qty'
                'ABS Qty'
                'BUn'
INTO wa_excel_dwnld-line
                               SEPARATED BY c_delim.
APPEND wa_excel_dwnld TO it_excel_dwnld.
CLEAR: wa_excel_dwnld.
LOOP AT it_output INTO wa_output.
CONCATENATE   wa_output-iblnr
                  wa_output-zeili
                  wa_output-matnr
                  wa_output-maktx
                  wa_output-matkl
                  wa_output-werks
                  wa_output-lgort
                  wa_output-bldat
                  v_buchm
                  v_menge
                  v_wrtzl
                  v_stprs
                  v_difqy
                  v_absqy
INTO wa_excel_dwnld-line
                       SEPARATED BY c_delim.
    APPEND wa_excel_dwnld TO it_excel_dwnld.
ENDLOOP.
CALL FUNCTION 'GUI_DOWNLOAD'
    EXPORTING
      filename                = l_flname
      filetype                = 'ASC'
      write_field_separator   = '#'
    TABLES
      data_tab                = it_excel_dwnld

Problem in SAP Script - Paragraph AS - Chars getting truncated at end of

Output for one of script is not getting printed correctly.
When i see output of Script, text is printing beyond the end of line and last few characters are getting truncated.
For ex:
xxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx.Purc
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
For instance it was suppossed to show Purchase order in second line. But half of letter is truncated.
I want Purchase order to be printed on 3rd line automatically is enough space is not available on second line.
Please provide some useful solution for this
Thanks in advance
Umesh
Message was edited by:
umesh sn

if you want to print purchase order on next line do it like this...
Ex,
&var1& &var2& &var3&
Purchase Order &P_ORDER&.
Here, variable 1, 2 & 3 will be displayed in line 1 and purchase order will be displayed in line 2... now if you think data of variable 1 2 and 3 are getting truncated.. use tab spaces between this variables...define tab spaces in your paragraph format.
Ex:
&var1&,, &var2&,, &var3&
Note: if you think variable is too long use offset...
Ex: &var1(20)&
Close the thread if your question is answered.
Regards,
SaiRam

Fields are getting truncated

Similar Messages

Maybe you are looking for