Fields are in disable state

Hi,
I am getting all my fields in disable state......
please help me why i am getting in disable state
Thanks& Regards
Ravi Shnkar B

Hi Ravi,
May be the attributes which you may have binded with the input feilds is under a node of carinality 0:n. If it is so then change it to 1:n.
Actually what happens is even if you have mapped the attribute there is no element yet created for that particular attribute if the cardinality of the node is 0:n. Hence the feild will be displayed as Disable. When you make it as 1:n then a element of that attribute under that node is created. Hence you can see the feilds enabled.
I hope this solves the problem.
Regards
Pravesh
PS: Kindly consider rewarding points if helpful and solved.
Message was edited by: Pravesh Verma

Similar Messages

Items of input fields are disabled

Hi All,
I have created form using Web Dynpro. In this form, I have provided connnectivity with R/3 using RFC. After creation of the form, I noticed that input fields are disabled. Can you please suggest me the possible reason for this. I have mapped input field with model's parameter.
Regards,
Gaurav

Hi Gaurav,
The mistake you are doing is, you have to initialize the newly created input object. check below
/** Hook method called to initialize controller. */
public void wdDoInit()
//@@begin wdDoInit()
// Create a new element in the Bapi_Flight_Getlist_Input node
Bapi_Flight_Getlist_Input input = new Bapi_Flight_Getlist_Input();
wdContext.nodeBapi_Flight_Getlist_Input().bind(input);
// Create new elements in the Destination_From and Destination_To nodes
input.setDestination_From(new Bapisfldst());
input.setDestination_To(new Bapisfldst());
//@@end
This means.. adding to sunitha's code.. you should do below
public void wdDoInit()
//@@Begin wdDoInit()
Bapi<...>_Input input = new Bapi<...>_input ();
wdContext.nodeBapi<...>_Input().bind(input);
input.setXXX(new expectingobjectvalue());
//@@end
Check it...
Thanks,
Raags

Copying Control Fields are disable in SAP SD

Hi Friends,
I am having problem with copying control in SAP SD. While using T- Code VTAF, VTFF etc for copying control, I found all the standard fields are disable but I am able to do all the sale processing. Therefore me doubt is; when there is not even a single field is available in the copying control then how I am able to run all the activities. If these are hidden and maintained in background then how I can able to see the existing fields in copying control. Please reply as soon as possible and clear my doubt. I shall be great thankful to you for this.
Regards,
Bharat B

Hi Frank,
Thanks for yours kind response to my doubt but the question is still not solved. as i already explain in my question that the available standard fields are disable means they are not in display mode, else these are hidden/invisible, so please try to give me the appropriate answer for that..and one more thing i want to add i.e. standard fields means..the values avialable for source fields and target fields as per the sap standard..as there is no copyning control existing in the system..For instance; copying control from OR to F1, F2 etc, LF to F1, F2 etc are not shown in the system but i am able to process all the sales activities like sales order creation, Delivery Document and Billing Document creation, so i know that stuff that if the copying control is not available then system won't be aloww me to do the single transaction for sales processing..I know this is bit time consuming and cofusing too but i am having faith in YOU. I think now you have understood my problem..so please provide me the solution for that. I shall be great thankful for this.
Thanks and Regards,
Bharat B

Copying Control Fields are disable

Hi Friends,
I am having problem with copying control in SAP SD. While using T- Code VTAF, VTFF etc for copying control, I found all the standard fields are disable but I am able to do all the sale processing. Therefore me doubt is; when there is not even a single field is available in the copying control then how I am able to run all the activities. If these are hidden and maintained in background then how I can able to see the existing fields in copying control. Please reply as soon as possible and clear my doubt. I shall be great thankful to you for this.
Regards,
Bharat B

Hi Friends,
Thanks for yours kind response to my doubt but the question is still not solved. as i already explain in my question that the available standard fields are disable means they are not in display mode, else these are hidden/invisible, so please try to give me the appropriate answer for that..and one more thing i want to add i.e. standard fields means..the values avialable for source fields and target fields as per the sap standard..as there is no copyning control existing in the system..For instance; copying control from OR to F1, F2 etc, LF to F1, F2 etc are not shown in the system but i am able to process all the sales activities like sales order creation, Delivery Document and Billing Document creation, so i know that stuff that if the copying control is not available then system won't be aloww me to do the single transaction for sales processing..I know this is bit time consuming and cofusing too but i am having faith in YOU. I think now you have understood my problem..so please provide me the solution for that. I shall be great thankful for this.
Thanks and Regards,
Bharat B

Dynpro fields are disabled

Hi there,
I want to call a Remote function, but before that i want to set some fields by the values typed in by a web dynpro application.
I imported the RFC model, defined a view but when the view comes up for some reason all the fields are disabled.
Can anybody tell me what i should do in order to get the fields enabled
thanks
Bertil

Hi,
If the rfc imported is zabc_input, I hope you have done the following.
zabc_input inp=new zabc_input();
wdcontext.nodezabc_input().bind(inp);
Suppose you have to input some String value and the attribute is name and mapped to an input field try out the following.
inp.setName(new String);
Hope it would help.
Do pls send in feedback.
Regards
Noufal

While creating info record mandatory fields are disable .

hi all,
while creating info record some mandatory fields are disable (valid to) in condition what i can do to procede further?
how i fill data in that field?

Hello,
I think that is set as a mandatrory field. You can give any values in days here. Enter 1 or 2 and proceed.
Prase

All fields are not displayed in SM30

Dear All,
I have created one Z-Table with 5 fields. For that Z-Table I have maintained table maintenance generator. Now in SM30 I am able to see only 3 fields, I have checked all the options but I am not able to find out what is the problem that 2 fields are not getting displayed.
Please tell me what might be the issue?
warm regards,
nishu

HI,
While generating the TM there is oneoption which can disable some fields in sm30.
I think they may be the reason in your case.
regards,

Adding a field to an sql statement in Oracle Reports error ORA-00933

We have been requested to add a field that already exists in the table referred to by the sql statement in Oracle Reports Builder. The report was set up by a consultant about 3 yrs ago and we don't really have much skill in this area. What is happening when I try to modify the SQL statement, either adding a field or deleting a field to the SELECT statement, causes an error message preventing the statement from being saved. The only way out of the error message is to click Cancel. The error message is
ORA-00933:SQL command not properly ended
ORDER BY Program ==> NAME
Even adding or deleting a space anywhere in the SQL statement causes the error (not adding any new fields). A coworker found that if we comment out the ORDER BY, the statement will accept the new field in the SELECT section, however then we lose the order by functionality. I would like to add one additional field before the FROM. Not sure if any additional data are needed. Thank you.
SELECT p.person_uid PIDM_KEY, p.id_number ID,
 p.full_name_lfmi name,
 p.BIRTH_DATE, p.GENDER Sex,
 Decode(a.residency,'D',p.Primary_ethnicity,'F') Ethn,
 a.academic_period TERM,
 CASE WHEN :p_group_by = 'PROGRAM' THEN a.program
 ELSE ' '
 END AS Program,
 a.COLLEGE, a.degree, a.major, ' ' rule,
 a.STUDENT_POPULATION,a.STUDENT_LEVEL, a.application_status Status, a.application_status_date app_sts_dte,
 ad.decision_date1 Last_Dec_Date,
 ad.decision1||' '||ad.decision2||' '|| ad.decision3||' '|| ad.decision4||' '|| ad.decision5 Decisions,
 /* Deposit Date uses the last term entered in :p_term parameter string */
 (SELECT MAX(deposit_effective_date) FROM usf_as_deposit WHERE account_uid = a.person_uid &term_clause group by account_uid) AS "DEPOSIT DATE",
 ph.phone as PHONE,
 CASE WHEN PS.FIRST_CONTACT IN ('NET','PAP','COM','COP') THEN PS.First_Contact
 ELSE CASE WHEN ps.latest_contact IN ('NET','PAP','COM','COP') THEN PS.Latest_Contact
 ELSE ' '
 END
 END AS FIRST_CONTACT,
 DECODE(:p_address,'Y',REPLACE(adr.street1||' '||adr.street2||' '||adr.street3||' '||adr.city||','||adr.state||' '||adr.nation||' '||adr.zip,' ',' '),' ') as address, adr.nation, adr.state,
 goremal_email_address email, a.residency, a.application_date, p.primary_ethnicity, c.cohort
FROM MST_ADMISSIONS_APPLICATION A,
 MST_PERSON p,mst_pre_student PS, Admissions_Cohort c, usf_v_phone_pr_ma ph,
 MST_admissions_decision_slot AD, usf_v_email, usf_v_address_dr_lr_ma_pr adr
WHERE a.PERSON_UID = p.person_uid
 AND a.curriculum_priority = 1
 AND a.person_uid = ps.person_uid
 AND a.person_uid = ad.person_Uid(+)
 AND a.person_uid = goremal_pidm(+)
 AND a.person_uid = adr.pidm(+)
 AND a.person_uid = ph.pidm(+)
 AND ph.rnum(+) = 1
 AND a.person_uid = c.person_uid(+)
 AND a.academic_period = c.academic_period(+)
&Where_Clause
 /* TAKE OUT FOLLOWING LINE AFTER DATA IS CLEANED UP */
 AND NOT(p.id_number = '00000000' OR SUBSTR(p.id_number,1,1) = 'B' OR UPPER(p.full_name_lfmi) LIKE '%TESTING%')
 AND a.application_status_date >= NVL(:p_as_of_date,sysdate-8000)
 AND a.academic_period = ad.academic_period(+)
 AND a.application_number = ad.application_number(+)
 AND a.degree <> 'ND' /* AND a.college <> 'LW' -- Does not need non-degree and law students */
 &Cohort_Clause
ORDER BY Program &ORDER_CLAUSE

Hi Denis,
I tried your suggestion. The good thing is that adding the comma allowed me to be able to add a.campus to the select statement, unfortunately, another error message happened.
ORA-00936: missing expression SELECT p . person_uid PIDM_KEY ,
p . id_number , p . full_name_lfmi name , p . BIRTH_DATE , p . GENDER Sex ,
Decode ( a . residency , 'D' , p . Primary_Ethnicity , 'F' ) Ethn , a . academic_period TERM ,
CASE WHEN : P_group_by = 'PROGRAM THEN a I started over and tried only putting in the comma and get the same message even though I didn't add campus. After that, removed the comma which led to the ORA-00933 error message. So once again, I had to close the file without saving, in order for the report to run at all.

Sold to Party and Ship to party field are in grey out mode in VA01.

Hi Friends,
I am facing a very critical situation, Please help me on this.
While creating the sales order by VA01, the Sold to Party and Ship to Party field are in grey out, so we cannot enter sold to party and ship to party. This is happening for all Order types.
And while checking the existing sales order by VA02, so I found that at Header level and Item level the Partner tab are disable
( mena partner tab are in grey mode,).
But when we click on sold to party field in VA02 it directly moves to partner but all Partner shown in Sales tab.
I have check all the partner function and partner determination configuration.
So can any one help me out in this, how in VA01 sold to party and ship to party field are in grey out mode.
How in VA02 the partner tab are disable.?
Thanks
Irfan Ullah
09370236510

Hai Irfan Ullah,
In Sales - customer
1. Partners are listed (SP,BP,PY, SH)for account group and Partner Determination procedure(TA) is assigned to it
Now for sales order type you need to assign the partner determination process
SPRO
Sales and Distribution
Basic Functions
Partner Determination
Set Up Partner Determination
Execute
Set Up Partner Determination for Sales Document Header
Select TA - standard order from the right side list
and select Partner Determination Procedure Assignment (from left)
Now assign your sales type to Partner determination TA.
Create a SALES order you can find the sold to and ship to are editable.
Regards,
Mani

How to get an Adobe trusted function javascript to save a pdf form even if fields are empty?

I have a form I have created in Livecycle designer which I want to save to a specific location using a combination of specific fields in the form. I have been able to do this by writing a trusted function and putting it in the adobe javascript file and then putting some code on a save button in the form. However, it may be that some of the fields (vfirstname and vsecondname) may be blank and i still want the form to save. Ideally i want to write an if statement to substitute those fields for other fields if they are blank but cant get the code to work.
Working code in trusted function file
// SaveAs Function1 var mySaveDoc = app.trustedFunction(function(doc) { app.beginPriv(); var vDate1 = event.target.xfa.resolveNode("form1.page1.Table1.Row1.leftsideofform.Timeanddate.Dateofca ll").rawValue.toString(); var vfirstname = event.target.xfa.resolveNode(" form1.page1.Table1.Row1.rightsideofform.Prospectiveclient.ClientFirstname").rawValue.toSt ring(); var vsecondname = event.target.xfa.resolveNode("form1.page1.Table1.Row1.rightsideofform.Prospectiveclient.C lientsurname").rawValue.toString(); var myPath = "/MGLCC01-SV/MGPdata/Mihomecare/testce/" + vDate1 +"_" + vfirstname + "-" + vsecondname + ".pdf"; // saveAs is the only privileged code that needs to be enclosed doc.saveAs({cPath: myPath, bCopy: true, bPromptToOverwrite: true}); app.endPriv(); });
Working code on save button in form
form1.#pageSet[0].Newenquirymasterpage.Button1::mouseUp - (JavaScript, client) var txt = form1.execValidate(); //This script will validate all required fields event.target.mySaveDoc(event.target) xfa.host.messageBox("Document has been saved to shared drive", "File Saved", 3, 1);
IF code for trusted function file that I cant get to work
// SaveAs Function1 var mySaveDoc = app.trustedFunction(function(doc) { app.beginPriv(); var vDate1 = event.target.xfa.resolveNode("form1.page1.Table1.Row1.leftsideofform.Timeanddate.Dateofca ll").rawValue.toString(); if (event.target.xfa.resolveNode("form1.page1.Table1.Row1.rightsideofform.Prospectiveclient. ClientFirstname").rawValue == " ") { var vfirstname = event.target.xfa.resolveNode("form1.page1.Table1.Row1.rightsideofform.Enquirer.EnquFirstn ame").rawValue.toString(); } else { var vfirstname = event.target.xfa.resolveNode("form1.page1.Table1.Row1.rightsideofform.Prospectiveclient.C lientFirstname").rawValue.toString(); } if (event.target.xfa.resolveNode("form1.page1.Table1.Row1.rightsideofform.Prospectiveclient. Clientsurname").rawValue == " ") { var vsecondname = event.target.xfa.resolveNode("form1.page1.Table1.Row1.rightsideofform.Enquirer.Enqsurname ").rawValue.toString(); } else { var vsecondname = event.target.xfa.resolveNode("form1.page1.Table1.Row1.rightsideofform.Prospectiveclient.C lientsurname").rawValue.toString(); } var myPath = "/MGLCC01-SV/MGPdata/Mihomecare/testce/" + vDate1 +"_" + vfirstname + "-" + vsecondname + ".pdf"; // saveAs is the only privileged code that needs to be enclosed doc.saveAs({cPath: myPath, bCopy: true, bPromptToOverwrite: true}); app.endPriv(); });
Can anyone suggest why the If code above doesn't work? or how i could get the form to submit even if the fields are blank?

It can also work if you certify the document and each user chooses to trust it to execute privileged JavaScript, which may be feasible in this setting. The method you'd use is doc.saveAs: http://livedocs.adobe.com/acrobat_sdk/9.1/Acrobat9_1_HTMLHelp/JS_API_AcroJS.88.524.html
Also, read the following tutorial: http://acrobatusers.com/tutorials/how-save-pdf-acrobat-javascript

Some fields are missing in some BO XI 3.1 reports

Hi Guys,
We are facing a strange issue on some webi reports, BO version is XI 3.1 and product version is 12.2.8.638. These reports are using a same universe which retrieves data from Data Federator
Issue Detail: Some fields are showing empty when we run the report at 1st time, but these fields will shows correct value when we run the 2nd time. Universe level Max Row limitation is 5,000,000 and no run time limitation.
I will appreciate if you can help me to fire the root cause.

Hi Nigel,
Good Morning.
Please check following :
1. Are you facing same issue in Webi Rich Client?
2. If Report ran fine in WRC, see in which viewer (Web, Advanced etc.) issue persists.
3. If all the viewers having same issue check whether loadbalancer or firewall (if any) blocking the data.
- [You can test it with infoview link bypassing an loadbalancer and make sure your firewall is stop and disabled.]
Regards,
Veer S.

Unable to enter Acquisition & Accu Dep values in AS91 since fields are grey

Hi Friends,
I am not able to enter the acquisition & accumulated values in AS91 as the fields are disabled.My capitalization date i am entering is 01.01.09 which is prior to transfer date.I have done the following to ensure entry via t code AS91.
1. Set Co. Code Status - 1
3. Set Transfer Date: 31.03.09 (Since the Go-Live Date is 01.04.09)
4. Set Last posted period: 3 (FY: is Jan to Dec)
5. Specify the net book value - Blank
6. Have done AJAB ( though not required for FY 2008)
7. Have changed the FY - AJRW
In Screen layout OA77 & OA78 i could not find fields for Acquisition values & Accu Dep to check whether they are suppressed.
I tried to see the earlier threads on this issue bu did not succeed.Have i missed out anything ?Please let me know.
Thanks
Sunil

Hi,
I have just tested your scenario and get your error same like you but why, I think so you gave the capitalization date 31-03-09 (this is date is set for transfer date), fields are display. If you give capitalization date of previous year, itu2019s working perfectly fine. And this is standard practice.
So you need to upload data of pervious year only by AS91. Not for your current fiscal year capitalization and for this use normal by AS01 (For large data create upload LSMW).
I hope if you gave the capitalization date of pervious year you will see fields are ready for input.
Please inform me if its work or not.
Regards
Javed

Radio buttons (from Indesign) get larger and overlap when fields are highlighted in Acrobat X

I have created my first set of interactive forms using Indesign CS6 Buttons and Forms dialog box. As the formatting of the fields does not seem to carry over, I have left the text boxes as Indesign objects and added text fields over the top of them in Acrobat X. I also intended to add drop down menus in Acrobat instead because I didn't like how the Indesign list box behaved in Acrobat (having to click through each item rather than dropping down the entire list). There does not seem to be a way to add a drop down menu item from within Indesign. (Or if there is, can someone please point it out? :-) )
However I used the sample buttons supplied within Indesign to create radio buttons and check boxes (which automatically included the graphics for the different states). On my first test export to Acrobat it appeared that the buttons retained their formatting, but something rather strange is happening when the fields are highlighted, whereby the buttons enlarge and overlap each other. Very frustrating I must say! I have just about gone nuts trying to find a solution. I've tried several different button options from the sample set; I've created them from scratch within Indesign; I've attempted to resize the fields in Acrobat form editing mode, but this screws up the original buttons. I also have found that once selected in Acrobat, I cannot deselect them again. (Don't know if this is significant info but it may point to some kind of stacking problem??)
Anyway, to make it clearer here are some screen captures:
1. Form as it looks when opened in Acrobat X. The two different check box styles are from me experimenting in trying to fix this issue. But they all seem to behave the same way once highlighted.
2. Form when interactive fields are highlighted. The text fields are perfect but note the big ugly overlapping circles... :-(
And some further explanation of how I created the buttons and their issues:
I would very much appreciate some guidance on what I'm doing wrong here, as my poor little head is going to explode very shortly (and my client is getting pretty annoyed at the delay!!)
Thank you in advance :-)

I am having the exact same problem. I can't find a way around it. It seems that they included some states like normal, rollover, and click—but they didn't include a highlighted state. So when highlight fields is on it just shows the generic standard check box, which looks ridiculous if you have customized it at all in inDesign. I read a lot of people saying they can't find a way to change the highlight state—anyone out there have any answers?

Email submit button causing required error when all required fields are filled in

It looks like if I have more than 1 instance of subform added, my email submit button triggers "..at least one required " error message when all required fields are filled-in.
I toggle subforms between "visible" and "hidden (from layout)". Any suggestion is appreciated.
ralph

The fields that are hidden should have the validate.nullTest property set to "disabled", something like;
TextField1.validate.nullTest="disabled";

Problem in using Field Symbols in HIDE statement

Hi All,
I am working in an Upgrade project ( from 4.6B to ECC 5.0 ). In a program I found few warnings on HIDE statement because they have used Field Symbols in HIDE statement.
The warning is " HIDE on a field symbol is dangerous, but the formal parameter "" is not ".
and the piece of code is
SET EXTENDED CHECK OFF.
HIDE: flg_pick_up, <s1>, <s2>, <s3>, <s4>, <s5>, z_feld_ind.
CLEAR flg_pick_up.
SET EXTENDED CHECK ON.
all the field symbols are of type ANY. SO can any one help in removing those warnings.
Please reply me as soon as possible.
With Regards,
Amarnath Singanamala

Hi amarnath,
1. Why do u want to remove
the warning ?
2. This warning (and not an error)
is a GENUINE warning,
which the system wants the user to make aware of.
3. By doing some xyz,
even if u may be able to hide the warning,
the warning may be hidden (for display purpose only),
but,
the warning will still be there inside the system.
4. I think u should ignore the warning,
(if there are no other repurcussions).
regards,
amit m.

Fields are in disable state

Similar Messages

Maybe you are looking for