Fields with no kerning?

I'm really vexed, I have created a form with a series of fields. When information is typed into a field, the font's kerning appears to get dropped. Type ATAWAY in a field and compare that with how it's displayed in InDesign or Word. Doesn't seem to make any difference which font gets embedded, the type is not kerned. Has anyone else seen this or is this a singular fluke in my system?
Bill

Hello George,
Thank you, again, for passing on some of your vast knowledge about Acrobat.
Guess I'll have to post this one to the "requested features" list.
Sincerely,
Bill Lomax
Message was edited by: Bill Lomax

Similar Messages

Error while adding a custom field with Input help via AET

Hi All,
I need to add two custom field under Service orders at Item level in component BT140I_SRVP.
One field is required to have the input search help f4 and autopopulates the second field
I am able to add one field(not requiring help) successfully through AET .
I have created one Zsearch_help in se11 and its successfully running and Autopopulating seocnd field while I am testing it
While adding second field through AET,I need to enter following details as -
field label,search relevant ,serach help etc.
When I type the name of my 'Zsearch_help' against field search help it gives me following error
'Search help is not compatible'.
Secondly,not getting getter and setter methods for the attrributes in BTAdminI.
Last,please tell me if i create zhelp and activate it,would it automatically appear in the list on AETwhile assiging it to input field?
Please help me out.Kindly be detailed as I am new to SAP CRM.
Thanks,
Shivani

The question is answered in CRM 7.0 forum:
Getting error while adding a custom field (with input help) through AET

Help, please - I need a box to pop-up when user hovers over a field with their mouse??

I created a form with several drop-down fields / questions. I would like to create a box that pops up when the person who is filling out the form hovers over the question/ field with his or her mouse. The box would contain additional information about the question that the person might consider before they select the answer. I don't want to clutter the form (and not all form-filler-outers will want or need to see the additional information) so I want it to pop up when the person hovers over the question with their mouse.
Can someone provide some help with how I can do this?
I'm still new to this.
Thank you!!!

Hi,
To follow on from radzmar, here is a summary of the features that are available/restricted depending on how you deploy your form.
There are two ways to apply Reader rights, one is using Acrobat Standard (v9) or Acrobat Professional (v8). The other is using an Adobe server product called LiveCycle Reader Extensions ES2.
You don't need script to apply the Reader rights to your form. Once you have applied the rights, users with Reader will be able to save the data in the form, however there may still be other restrictions in place, like attaching documents to the form or exporting XML data.
There summary is also available in PDF, with screen shots, here: http://assurehsc.ie/blog/index.php/2010/05/using-livecycle-forms-in-acrobat-and-reader/
Hope that helps,
Niall

How can I have two fields with the same name if it makes sense?

Hello, folks :)
I have a pretty hard time figuring out how I can have two text fields with the same binding name.
The whole problem is that when I need two fields with the same binding name they are still differnent coz they have the same name but differnt indices.
I should make a form filled at runtime by merging a pdf form file and an fdf file data file. And I have no choice to do it differently. And my form file needs some data like customerName, companyName twice in one form. But there's only one possible buinding name indexed zero.
How can I create a field with absolutely the same name or is it just impossible due to possible name conflicts? And is there a workaround to this problem? I just need one piece of data repeated in different places.
Thanks for your replies :)
P.S. if u think that the problem is not clear enough let me know. I'll supply you with more details. But the general process can not be changed.
One pdf should be mergred with an fdf with as the result of their merge a new filled and flattened form. I have no control over fdfs their are generated by Oracle and I can not fill the form using XML files coz this process should be integrated in a working application.

I just thought about a really ugly workaround with a server-side script adding values to fdf files but it's a bit of work and tests and personally i think it's a bad idea :-(

How do I add and remove text in a text field with a checkbox?

How do I add and/or remove text in a text field with a checkbox?
this is my script in the text box......
event.value="Hello, this is my narrative. \r\n\nFamily: \r\n\n" + this get.Field("FirstName").value + " " + this.getField("LastName").value + was born on"=this.getField("DOB.value + "\r\n\n + this.getField("drpField").value + "\r\n\n" + this getField("Father").value
The text box looks like this...
Hello, this is my narrative.
FAMILY:
John Smith was born on 08/02/2000
Boby Lou
Jack Smith
I need to add/or remove the father field (Jack Smith) & r/n/n with a check box.
Does anyone know how to do this?

There are multiple errors in your code...
Use this code instead (adjust the name of the check-box):
var msg = "Hello, this is my narrative. \r\n\nFamily: \r\n\n" + this get.Field("FirstName").value + " " + this.getField("LastName").value + was born on" + this.getField("DOB.value) + "\r\n\n" + this.getField("drpField").value;
if (this.getField("FatherCheckBox").value!="Off")
msg += "\r\n\n" + this getField("Father").value;
event.value = msg;

Field with a default value from another field

I need to populate a field as the default value from another field that the user inputs. I've tried the scripting that I found from the below Topic in the Archived Forums, but I'm not able to make it work. I've tried numerous variations and still to no avail. I tried to make the scripting work in Acrobat 6 and then decided that maybe I needed to upgrade, so I'm now trying it in Acrobat 8 with no results. Can anyone help?
Topic
Acrobat 5 - field with default value of another field
Ben PF - 03:31am Mar 23, 2007 Pacific
How can I have a field date2 which has the default value of field date1, but which can be edited by the user if necessary without changing the value of date1.
I've tried, but I just can't figure it out!
Any help much appreciated.
Ben
| Back to Topic List | Bookmark | Subscribe
To start a NEW discussion click on the Back to Topic List link and select Add Topic.
If you are in an archive forum please go up to the main topic list (archives are read only).
Messages
2 messages. Displaying 1 through 2.
First Previous Next Last Show All Messages
Gene Dianoski - 5:22am Mar 23, 07 PST (#1 of 2)
This, or some variation of this, should work:
if(this.getField("date2").value == ""{
this.getField("date2").value = this.getField("date1).value;
| Bookmark back to top
Ben PF - 6:49am Mar 23, 07 PST (#2 of 2)
Thanks very much.
I put it in at document level to start, but it didn't run the script automatically when date1 was first filled in, so I have put it in as a mouse exit action in date1 and it works a treat.
Thanks for your help.
Ben

Okay forget what I posted above and lets start over. Go to your first field and under Properties -> Actions Tab -> Select Trigger -> On Blur Run A JavaScript.
Put this:
this.getField("myField2").value = event.target.value;
Make sure that you replace ("myField2") with the actual name of your second field. I just tested this and it works for Acrobat version 6.
I haven't been doing as much javascripting as I used to, so sometimes I too make some basic mistakes.

A form field (for a client fax number) on my own web site is remembering my email address used to log into the site. The usual clearing of the remembered entry works OK, but evey time I remember the login it automatically populates this one field with my

The form where this happens contains an email field as well as a password field, so it does have both of the fields that are on the login page. It is used to modify the details of the user of our site and is accessed by the administrators, not the users themselves. To auto fill the fax field (which is named _fax) with my email address is very strange. If I log in as a different admin user then the email address I use to login appears in the field. The password field is also appears on the form and is being populated, presumably with my password. How can Firefox get it wrong and put an entry in a field with a different name, and why that field and not other empty fields on the form?
== This happened ==
Every time Firefox opened

First be sure login and password are OK. Sometimes the address starts wit "http://..." and sometime starts with "ftp://...". Try both normal FTP access and Scure FTP access (SFTP). At the end, contact the site's provider.

A function instead of UNBOUNDED PRECEDING (like "Last field with value=0")

Hello,
I have a table with many rows. The attributes of the table are code, month and value.
For each code there are 12 months and 12 values.
No I want to add the gaps between the months...
Is it possible to count the following gaps between the different rows...?
For example:
Original table1:_
code, month, value
1,1,20
1,2,0
1,3,30
1,4,0
1,5,40
1,6,0
1,7,0
1,8,20
1,9,0
1,10,10
1,11,0
1,12,0
5,1,0
5,2,20
5,3,10
description:*
january value = 20
february value = 0 (=>count this gap => new value 1 )
march value = 30
april value = 0 (=>count this gap => new value 1 )
may value = 40
june value = 0
july value = 0 (=>count this two following gaps => new value 2 )
agust value = 20
september value = 0 (=>count this gap => new value 1 )
october value = 10
november value = 0
december value = 0 (=>count this two following gaps => new value 2 )
New target table:_
code, month, value
1,1,20
1,2,*1*
1,3,30
1,4,*1*
1,5,40
1,6,0
1,7,*2*
1,8,20
1,9,*1*
1,10,10
1,11,0
1,12,*2*
5,1,*1*
5,2,20
5,3,10
I tried this code:
select code, month
sum(value) over (
order by month
rows between unbounded preceding and current row
*) as final_value*
from table1 order by month;
This adds all following fields cumulative from beginning to current_row. But I need this adding only for the following gaps... then start with countin by 0.
I need only the following like in the example on top. Maybe is there an other function like decode to count only the following gaps...!?
A function instead of unbounded preceding....like "*Last field with value=0*" or something... ?
Best regards,
Tim

TimB83 wrote:
I have a table with many rows. The attributes of the table are code, month and value.
For each code there are 12 months and 12 values.
No I want to add the gaps between the months...
Is it possible to count the following gaps between the different rows...?
For example:
Original table1:_
code, month, value
1,1,20
1,2,0
1,3,30
1,4,0
1,5,40
1,6,0
1,7,0
1,8,20
1,9,0
1,10,10
1,11,0
1,12,0
5,1,0
5,2,20
5,3,10
description:*
january value = 20
february value = 0 (=>count this gap => new value 1 )
march value = 30
april value = 0 (=>count this gap => new value 1 )
may value = 40
june value = 0
july value = 0 (=>count this two following gaps => new value 2 )
agust value = 20
september value = 0 (=>count this gap => new value 1 )
october value = 10
november value = 0
december value = 0 (=>count this two following gaps => new value 2 )
New target table:_
code, month, value
1,1,20
1,2,*1*
1,3,30
1,4,*1*
1,5,40
1,6,0
1,7,*2*
1,8,20
1,9,*1*
1,10,10
1,11,0
1,12,*2*
5,1,*1*
5,2,20
5,3,10
...Tim,
you should post this question on the "SQL and PL/SQL" forum since it's a typical SQL question.
There are probably much better ways to accomplish this and the guys over there will tell you, but here are two examples that might get you started:
1. Pre-10g without MODEL clause
with t as (
select 1 as code, 1 as month, 20 as value from dual union all
select 1 as code, 2 as month, 0 as value from dual union all
select 1 as code, 3 as month, 30 as value from dual union all
select 1 as code, 4 as month, 0 as value from dual union all
select 1 as code, 5 as month, 40 as value from dual union all
select 1 as code, 6 as month, 0 as value from dual union all
select 1 as code, 7 as month, 0 as value from dual union all
select 1 as code, 8 as month, 20 as value from dual union all
select 1 as code, 9 as month, 0 as value from dual union all
select 1 as code, 10 as month, 10 as value from dual union all
select 1 as code, 11 as month, 0 as value from dual union all
select 1 as code, 12 as month, 0 as value from dual union all
select 5 as code, 1 as month, 0 as value from dual union all
select 5 as code, 2 as month, 20 as value from dual union all
select 5 as code, 3 as month, 10 as value from dual
r1 as (
select
        case
        when value = 0
        then 1
        else 0
        end as is_gap
      , case
        when value != 0
        then rownum
        else null
        end as grp_info
      , code
      , month
      , value
from
        t
r2 as (
select
        last_value(grp_info ignore nulls) over (partition by code order by month) as grp
      , is_gap
      , code
      , month
      , value
from
        r1
select
        code
      , month
      , case
        when value = 0
        and (lead(value) over (partition by code order by month) != 0 or
             lead(value) over (partition by code order by month) is null)
        then sum(is_gap) over (partition by code, grp)
        else value
        end as value
from r2;2. 10g and later with MODEL clause
with t as (
select 1 as code, 1 as month, 20 as value from dual union all
select 1 as code, 2 as month, 0 as value from dual union all
select 1 as code, 3 as month, 30 as value from dual union all
select 1 as code, 4 as month, 0 as value from dual union all
select 1 as code, 5 as month, 40 as value from dual union all
select 1 as code, 6 as month, 0 as value from dual union all
select 1 as code, 7 as month, 0 as value from dual union all
select 1 as code, 8 as month, 20 as value from dual union all
select 1 as code, 9 as month, 0 as value from dual union all
select 1 as code, 10 as month, 10 as value from dual union all
select 1 as code, 11 as month, 0 as value from dual union all
select 1 as code, 12 as month, 0 as value from dual union all
select 5 as code, 1 as month, 0 as value from dual union all
select 5 as code, 2 as month, 20 as value from dual union all
select 5 as code, 3 as month, 10 as value from dual
select
         code
       , month
       , value
from
         t
model
partition by (code)
dimension by (month)
measures (value, 0 as gap_cnt)
rules (
gap_cnt[any] order by month =
case
when value[cv() - 1] = 0
then gap_cnt[cv() - 1] + 1
else 0
end,
value[any] order by month =
case
when value[cv()] = 0 and presentv(value[cv() + 1], value[cv() + 1], 1) != 0
then presentv(gap_cnt[cv() + 1], gap_cnt[cv() + 1], gap_cnt[cv()] + 1)
else value[cv()]
end
);Regards,
Randolf
Oracle related stuff blog:
http://oracle-randolf.blogspot.com/
SQLTools++ for Oracle (Open source Oracle GUI for Windows):
http://www.sqltools-plusplus.org:7676/
http://sourceforge.net/projects/sqlt-pp/

I have a PDF form that I want to pre-fill multiple fields with example text that disappears onFocus. Is there a way to do this?

Pretty much what my subject line says. My client wants example text in the fields of a PDF form that will disappear when the cursor enters the field. When I try this with show/hide layers, the layer becomes visible as soon as I enter form editing mode, and the action doesn't work properly. Any help? I was able to get it to work with a single field, but multiple fields with example text on multiple layers doesn't work for some reason.
Thanks for any help.

Hi Jeffrey ,
You need to use a custom Format script for the field.
Regards
Sukrit Dhingra

JS error while using input fields with type=file on XP SP2

Hi all,
we found a new problem in applications which use input fields with type=file running in a browser on Microsoft Windows XP with SP2.
A typical test layout might look like:
<html>
<head>
    <title>File-Upload</title>
</head>
<body>
    <form action="/cgi-bin/upload.pl" method=post
          enctype="multipart/form-data">
      <input type=file size=50 maxlength=100000 name="file"
             accept="text/*"><br>
      <button onclick="document.forms[0].submit();">Send</button>
    </form>
</body>
</html>
When you add a link without the fully qualified path (for example pic01.jpg instead of c:\pictures\pic01.jpg) and click on the 'Send' button, nothing happens and you get a Javascript error 'Access denied'.
The solution can be found in the MS Knowledge Base article 892442:
http://support.microsoft.com/default.aspx?scid=kb;en-us;892442
We still investigate this issue and will inform you about the further proceeding.
Regards,
Rainer

Hi Yepin Jin,
I am facing the same issue did you solved it?
Regards,
Orlando Covault

Field with predefined values (F4 field) in sales order

My customer needs to enter data in sales order and then filter/sort on it in VA04/VA05 and currently uses field "Name" in the header but this is is text field and errors occur. Is there another field, where list of values can be predefined (field with F4 possible values) that can be used in the sales order?

Hi
Please, see these notes
SAP Note 549438 - FAQ: Search help for the sales order
SAP Note 389876 - Search help for sales order items
When you define your own elementary search helps you have a field to populate the 'default value' (see it in tcode SE11)
Regards
Eduardo

Adding fields with data type "TIMS" to the BP transaction

hi all,
This is Anil regarding the addition of fields to the BP transaction.
here my problem is for BP transaction I could not find any BADI or screen exit to add the fields. Even EEWB tool does not allow us to cretate the fields with data type "TIMS". so could you please suggest any other way to add these fields to BP?
when I enter the values to the time fields in BP transaction, they must reflect in
BUT000 table also?
Regards,
Anil .

In the physical layer, Column Properties change the data type to int.
If still problem exists, In the Business Model, write a case statement like
case when column1=1 then 1 end
and apply count aggregation on the new calculated column,add the column to presentation table, use that new calculated column for report.
- Madan

Mass changes of Material Master field with different values

Hi,
How to change a field in Material Master for more than thousand materials. I think MM17 can only be used for mass changes of materials with same values. I need to upload different values for different materials. Is there any other way to do this.
Thanks,
K R Vishnu Kumar

Hi Kumar.
I think you have to use LSMW for mass updation for Material Master fields with different values.
Regards,
Rahul.

How to allow user to select pdf file on local machine and populate field with file name only

Folks,
I have a project requirement that I am stumped on. I am admittedly a novice, so forgive questions that may seem obvious.
My requirement is a form running on a client system where the user can click a button and select a PDF file name from a PDF on their local machine and then populate a form field with that file path & filename. The file names vary between all machines, so there is no static list. Note that the PDF is not embedded, nothing is executed, I simply need the file name.
There are several of these on a form (20+), so manual name entry is too error prone. I would like to use a 'browse' type dialog, but can not figure out how to implement it.
I've looked at app.browseForFile, but the users can not install a javascript file in their adobe folder or any other files; the functionality has to be integral with the original PDF.
Functionally, this is no different from the image object file browse, except that I need a PDF instead of an image file, so there doesn't seem like there should be a security issue that is any different from those surrounding the image object.
I've been stumped on this for the entire week, and I have a deadline rapidly approaching, so any examples or suggestions (please remember I'm a novice) would be greatly appreciated!

Thanks for the reply Paul - do you have any sample code of how to attach the PDF? Or how the user can select a PDF to open? I might be able to attach it, retrieve the file name, and then un-attach it.
Alternatively, do you know how to retrieve the file name from the imagePath object? It will let you select PDF files, but I can't find info on how to retrieve the file name. It should be the way you would retrieve the file name for an image.
As a novice in this, thanks for your help and patience!

How to populate a hidden form field with a value passed from another page

I'm using PHP/MySQL and DW CS4.
I am trying to obtain the external key for a table, and include it as a hidden field in a form for a second table.
The user selects a "need" from a list and is taken to a new page which displays the need selected in the prior page and a form the user can fill out with details of his offer, there should also be a hidden field in this form that contains the index to the needs table, this hidden field holds the external key. Most of the code is working, except for populating the hidden field with the external key. I have proven(by printing it to the screen) that I have obtained the external key and stored it in a variable ($saveNeedId) . What I'm unable to do is assign this variable to the hidden field in the form I'm about to store in a table. Sometimes I get zero and sometimes I get the index to the first need in the table. This ought to be simple but I can't get it to work, I must be missing something obvious - still very new to PHP.
Here's the code that sets up the variable and prints it to the screen for test purposes
      $saveNeedId = "-1";
          if (isset($_GET['needId'])) {
            $saveNeedId = $_GET['needId'];
            print $saveNeedId;
Here's the code that sets up the hidden fields in the form, the one I'm trying to set up is the first one, needId
     <input type="hidden" name="needId" value="<?php echo $row_rsNeedsUnmet['needId']; ?>" />
     <input type="hidden" name="offerId" value="" />
     <input type="hidden" name="MM_insert" value="form1" />
The page where the user sees the list of needs is here www.hollisterairshow.com/weneed.php
I'd really appreciate sone help with this, I've tried all combinations of double quotes, percent signs and nothing works...sigh.
Tony

Here's the code that sets up the variable and prints it to the screen for test purposes
      $saveNeedId = "-1";
          if (isset($_GET['needId'])) {
            $saveNeedId = $_GET['needId'];
            print $saveNeedId;
Here's the code that sets up the hidden fields in the form, the one I'm trying to set up is the first one, needId
     <input type="hidden" name="needId" value="<?php echo $row_rsNeedsUnmet['needId']; ?>" />
     <input type="hidden" name="offerId" value="" />
     <input type="hidden" name="MM_insert" value="form1" />
<input type="hidden" name="needId" value="<?php echo $_GET['needId']; ?>" />
I looked at your page. It looks like you figured it out.

Fields with no kerning?

Similar Messages

Maybe you are looking for