Fiji Timezone and Timezones in general

It seems OS X on mac or iphone has poor timezone support. I cannot find a timezone that fits for Fiji as well as for many Pacific Islands countries. At least on Linux they are all there...
Is there a chance to add a timezone for Suva, Fiji and may be for every capital of every country in the world?

All I can find for Fiji is Suva, the capital. Standard time zone: UTC/GMT +12 hours, no daylight saving time in 2008. In fact, no DST since 2000.
Time zone abbreviation FJT. Latitude: 18° 08' South, Longitude: 178° 25' East .
OK, here you are. This works just fine on my machine. Just make sure the Date & Time preference pane is unlocked (I'm not even sure that's necessary, but …).
DO THIS AT YOUR OWN RISK. I have tested it, and the commands back up anything important, but I am not at your machine. You should have a full backup anyway. It won't necessarily keep the original file if you do it more than once.
Open the Terminal (from /Applications/Utilities) and copy and paste the following into the Terminal window, one line at a time, with a return after each line:
sudo -s
umask 0002; ln -sf /usr/share/zoneinfo/Pacific/Fiji /etc/localtime
cd /System/Library/PreferencePanes/DateAndTime.prefPane/Contents/Resources/TimeZone.prefPane/Contents/Resources/
mv allcitiesadj.plist allcitiesadj.plist.orig
sed '/^</arr/,$c
<array>
<string>-18.1333333</string>
<string>178.4166667</string>
<string>28</string>
<string>Fiji/Suva</string>
<string>FJ</string>
<string>Suva</string>
<string>Fiji</string>
</array>
</array>
</plist>
' allcitiesadj.plist.orig > allcitiesadj.plist
exit
After the first command, you will be prompted for your password. This is not echoed back (not even asterisks) for security reasons: just type it and press return. During the edit command, sed, you will see secondary prompt characters, ">" at the start of each line to remind you the command is not complete
Of course any Apple system update involving the Date & Time preference pane is likely to overwrite this, so save these instructions

Similar Messages

Im new to the iCloud and Mac in general. After experincing a hard drive crash out of the blue, I lost everything. I want to make sure this doesn't happen again. I show backups for my iPhone and my daughter's iPod but my mac doesn't exist. How do I fix tho

I'm new to the iCloud and Mac in general. After experiencing a hard drive that went out of the blue, I lost everything. I wanted to use the icloud to back my documents up. I went into the iCloud under settings but it only shows my iPhone and daughter's iPod. How do I get my Mac to back up too? Is there something I need to use to have the documents back up?

You cannot back up your Mac to iCloud. Even backing the whole thing up to another online service would be dubious because it would take a very long time. You should buy an external hard disk and back up to that - even better, buy two and use one to make a Time Machine backup and the other to clone your Mac from time to time, thus giving you a backup from which you can boot in an emergency.
If you wanted to back up a suitably sized selection of data to an online service there are a number of third-party methods available, some of which are examined here:
http://rfwilmut.net/missing3

After upgrading to IOS 5.1 I no longer can see Verizon at the top of my Iphone and under settings general Network says Not Available Why is this? Did the upgrade cause this?

after upgrading to IOS 5.1 I no longer can see Verizon at the top of my Iphone and under settings>general>Network>says Not Available Why is this? Did the upgrade cause this?
steve

See this tip --> http://support.apple.com/kb/TS1559
If this doesn't resolve it you most likely have a hardware failure. Fortunately, your phone is in warranty, so if you take it to an Apple store they will replace it.

Disappointed in CS6 and Adobe in general

I am more and more disappointed in CS6 and Adobe in general. I no longer have any respect for Adobe or their products.
I can't read the new title editing function in Premiere CS6 (it was fine in CS5). Somebody here said you can make it bigger: No you can't. You can make the box bigger like a picture frame around the edit, but the text is still unchanged and unreadable. Soundbooth was usable as a wave editor, Audition is not. Installed on an AMD machine, Premiere Pro CS6 imports Nikon video as audio and after more than a month of playing with it Adobe's India supper support still doesn't have a clue.
Dreamweaver CS5 Ste files won't fully import into CS3 or CS5 (it can't read the FTP user/pass), my install of Encore CS6 is missing all the menu templates and buttons so I go back to CS5, and I was totally disappointed that CS6 won't edit in 3D. The After Effects work around for 3D is a joke.
The Master Collection download install file is just a little too large to fit a backup on any DVD. How inconvenient! The first one kept asking for "Disk 2 - English/Japan". It would be nice if they got it right before releasing it to the public.
Finally frustrated with the idiocy of Adobe, I bought Grass Valley Edius 6.5. When I called GV for a minor issue I got an office in the USA on the second ring and a quick, correct answer. Everybody there speaks clear English. The Edius product simply works (it's been a broadcast news editoring standard for years) and I can also edit 3D. I can actually see titles when I'm editing them. It imports any file I want correctly, including the Nikon files that Premiere CS6 can't. It has all the functions that Premiere does, including good stabilization, and a few that Premiere does not.
And Grass Valley Edius is a product from Japan!
Wake up Adobe, your ship is sinking fast into the Indian Sea and I'm sailing in the other direction.

I had another adventure today. Learning from this forum that the menus and buttons missing from Encore CS6 were in a "missing items" update, I downloaded and installed the update only to find there were still no backgrounds, no buttons and only a few "menus". So I contacted Adobe Chat Support. I was put in contact with Rahul.
I filled in form indicating that the missing files update did not contain very many missing files.
Rahul asked what the error message was.
I said there was no error, that Encore CS6 after installing the update still contained no backgrounds or buttons.
Rahul asked for the serial number. I provided it.
Then Rahul asked what the error message was.
Rahul is not paying attention.
3 cents per hour would be overpayed for Rahul.
Rahul is not unlike all the others I've encounter with Adobe's outsourced support. They don't pay attention. They simply don't understand plain English. They are robots.
Adobe is not saving anything by hiring people who act like robots and accomplish nothing. They are only alienating customers. (Double meaning on the word "alienating")
Two other "Rahuls" wasted hours doing the same things over and over by remote into my computer trying to figure out the AVI files that came up as audio only, and they solved nothing.

Hi, I have selected earse content and settings in general settings, after that my iphone displays apple symbol only. Did i spoil my iphone?

Hi, I have selected earse content and settings in general settings, after that my iphone displays
apple symbol only. Did i spoil my iphone?

It takes a very long time, depending on the size 8,16,32GB?
it can take over a few hours.
if it doesn't work over 24hrs connect it to a computer using itunes, and choose update, it'll update it with the newest firmware.

" SYSTEM ERROR" with ERROR CATEGORY: Message and ERROR ID : GENERAL

HI all
I m doing JDBC -> XI -> SOAP -> XI -> FILE ( XML) scenario .I have implemented it using BPM .
But ,In MONI , i am getting a "SYSTEM ERROR " with "ERROR CATEGORY : MESSAGE" and "ERROR ID : GENERAL" .and
One thing more is there my all adapters are active (JDBC,FILE) in runtime workbench but SOAP adapters i am not able to see it there as its services are not defined in there .Is this problem is because SOAP adapters are not defined in runtime workbench ?

Hi Colin
I are using SP 3.0
I have checked the Communication channel monitoring and Adapter monitering also but in mine case when i want to see the SOAP adapter in adapter monitoring , the SOAP ICON is disabled there ,so i am not able to see whats the status of my SOAP adapter i have used in my scenario
Thanks and Regards
Abhishek

HT4972 I can't update my iPad to iso 5 please help. When I go to settings and then to general it doesn't have an update button for "check for updates". Thanks

I can't update my iPad to iso 5 please help. When I go to settings and then to general it doesn't have an update button for "check for updates". Thanks

If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.0.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
 Cheers, Tom

My friends has found he has, since 2006, accumulated multiple apple ids. he's very concerned about icloud security and security in general, having his pc hacked repeatedly. how can he permanently delete the extra, apple ids, please?

my friend has found he has, since 2006, accumulated multiple apple ids. he's very concerned about icloud security – and security in general, having had his pc hacked repeatedly. how can he permanently delete the extra, apple ids, please? Thanks.

Hello, windypinesands.
Thank you for visiting Apple Support Communities.
If your friend is concerned with the security of his Apple ID or iCloud account, I would recommend reaching out to our Apple ID Account Security team to assist him with this issue.
Apple ID: Contacting Apple for help with Apple ID account security
http://support.apple.com/kb/HT5699
Cheers,
Jason H.

HT4623 I am trying to update my iPad 1 to iso5. And in the generals settings it does not say software update. Can you help?

I am trying to update my iPad and under my general settings there is nothing that states software update. Can someone tell me how to do this.

If you are on a version earlier thatn 5, you will not see that option. It was introduced in 5. To updare from 4x.x or earlier, you will need to connect to a computer running a current version of iTunes: http://support.apple.com/kb/HT4972

HT4623 How can I up date my iPhone, when you go into settings and click on general there should pop up a thing that says update between about and usage it does not have it and I can't update it now

How can I update my iPhone,when I go into settings and click on general something should pop up between usage and about that says up but it does not and my iPhone needs to be updated.

If you don't have the update option on your phone, you will need to update in iTunes on your computer.

HAL, and daemons in general

Hi. I'm new to the forums, and this is the third thread I've started; I haven't been getting any responses, so I hope I'm not posting in the wrong place, spamming, or being otherwise annoying.
When I boot up, I get a message about my hardware abstraction layer [failed]-ing. Here's my rc.conf:
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime"
# USEDIRECTISA: use direct I/O requests instead of /dev/rtc for hwclock
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.utf8"
HARDWARECLOCK="UTC"
USEDIRECTISA="no"
TIMEZONE="America/Chicago"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
#MODULES=(snd_pcsp)
MODULES=(fglrx !pcspeaker !snd_pcsp)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="Bender"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# DHCP: Set your interface to "dhcp" (eth0="dhcp")
# Wireless: See network profiles below
#eth0="eth0 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255"
eth0="dhcp"
wlan0="dhcp"
INTERFACES=(lo !eth0 !wlan0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.1"
#ROUTES=(!gateway)
ROUTES=(gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This now requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(@syslog-ng pulseaudio hal !network !dhcdbd !networkmanager wicd netfs @crond alsa @openntpd)
#DAEMONS=(@syslog-ng !network pulseaudio hal dhcdbd networkmanager netfs @crond alsa @openntpd)
#DAEMONS=(syslog-ng network netfs crond)
Anyone know what's wrong here? Also, is there a way to look at all those messages that scroll past when you're booting? Shift+UpArrow doesn't work because the screen is reset at the end, and about half the messages get lost.
Also, is there a one-stop place to go for a list of all the daemons with a basic description of what they do? I'd like to start as many as I can in the background, but I'm afraid I'll break something. I'd also like to know which daemons need other daemons to start before them, so I can reorder the ones that don't matter to my liking.
One last thing, and not really related to the topic title (hope that's okay, seems like such a minor thing it doesn't need to take up a whole thread): I've been using 'shutdown -h now' to power down. Is that good or bad? Is there a way to get rid of the *beep* when I do this?
Thanks a bunch!
Last edited by Buce (2009-03-20 20:50:54)

Inxsible wrote:Generally it is a good thing to start hal before anything else. Try putting pulseaudio after hal in the DAEMONS array and see if that gets rid of the hal issue.
Worked like a charm, thanks!
And yes, its perfectly fine to use sudo shutdown -h now. There are other commands like halt and poweroff. But poweroff, AFAIK, is only a symlink to shutdown -h now
On my system, poweroff is a symlink to halt. But, either command makes a *beep* sound when I invoke it -- there must be some way to get rid of this. Shutting down didn't do that in Ubuntu when I hit the gui power button. How do they achieve that? Would it take a gui app to do? I'm running fluxbox, and I'd rather not go that route.
About which daemons to start in the background -- I start everything in the background except - syslog-ng - that's the daemon responsible for logging events and such, you do not want to miss the logging if something goes wrong.
Even hal? Seems like that's something I'd want to start before everything else, too.

Best Practices for Using Photoshop (and Computing in General)

I've been seeing some threads that lead me to realize that not everyone knows the best practices for doing Photoshop on a computer, and in doing conscientious computing in general. I thought it might be a good idea for those of us with some exprience to contribute and discuss best practices for making the Photoshop and computing experience more reliable and enjoyable.
It'd be great if everyone would contribute their ideas, and especially their personal experience.
Here are some of my thoughts on data integrity (this shouldn't be the only subject of this thread):
Consider paying more for good hardware. Computers have almost become commodities, and price shopping abounds, but there are some areas where spending a few dollars more can be beneficial. For example, the difference in price between a top-of-the-line high performance enterprise class hard drive and the cheapest model around with, say, a 1 TB capacity is less than a hundred bucks! Disk drives do fail! They're not all created equal. What would it cost you in aggravation and time to lose your data? Imagine it happening at the worst possible time, because that's exactly when failures occur.
Use an Uninterruptable Power Supply (UPS). Unexpected power outages are TERRIBLE for both computer software and hardware. Lost files and burned out hardware are a possibility. A UPS that will power the computer and monitor can be found at the local high tech store and doesn't cost much. The modern ones will even communicate with the computer via USB to perform an orderly shutdown if the power failure goes on too long for the batteries to keep going. Again, how much is it worth to you to have a computer outage and loss of data?
Work locally, copy files elsewhere. Photoshop likes to be run on files on the local hard drive(s). If you are working in an environment where you have networking, rather than opening a file right off the network, then saving it back there, consider copying the file to your local hard drive then working on it there. This way an unexpected network outage or error won't cause you to lose work.
Never save over your original files. You may have a library of original images you have captured with your camera or created. Sometimes these are in formats that can be re-saved. If you're going to work on one of those files (e.g., to prepare it for some use, such as printing), and it's a file type that can be overwritten (e.g., JPEG), as soon as you open the file save the document in another location, e.g., in Photoshop .psd format.
Save your master files in several places. While you are working in Photoshop, especially if you've done a lot of work on one document, remember to save your work regularly, and you may want to save it in several different places (or copy the file after you have saved it to a backup folder, or save it in a version management system). Things can go wrong and it's nice to be able to go back to a prior saved version without losing too much work.
Make Backups. Back up your computer files, including your Photoshop work, ideally to external media. Windows now ships with a quite good backup system, and external USB drives with surprisingly high capacity (e.g., Western Digital MyBook) are very inexpensive. The external drives aren't that fast, but a backup you've set up to run late at night can finish by morning, and if/when you have a failure or loss of data. And if you're really concerned with backup integrity, you can unplug an external drive and take it to another location.
This stuff is kind of "motherhood and apple pie" but it's worth getting the word out I think.
Your ideas?
-Noel

APC Back-UPS XS 1300. $169.99 at Best Buy.
Our power outages here are usually only a few seconds; this should give my server about 20 or 25 minutes run-time.
I'm setting up the PowerChute software now to shut down the computer when 5 minutes of power is left. The load with the monitor sleeping is 171 watts.
This has surge protection and other nice features as well.
-Noel

Possible upgrade solution for people who have HD and problems in general.

OK, for me, Leopard has been as painful as going osx from OS9, at least the upgrade has been , dunno about the retail copy., bugs, bugs, bugs with the upgrade for sure.
Here is what happens generally., you upgrade and basically you need to run disk tools from a external drive or the Leopard DVD., the problems move on still.
Solution i found was to back up to another drive, that is right guys, spend another hundred bucks no one warned you about., get a external HD or if your living it high and collect macs as Apple assumes you may just have a second Intel mac laying around with a Sata drive in it to start up in "Firewire Target Mode", (hold the "T" at start up)and start cloning your drive with SuperDuper (also need to purchase)..
Ok
1- once you clone your drive (usualy a hour for the base system alone).
2- erase it as one partition,
3- in the options make sure it is set as GUID partition (takes about a hour) and
4- then as well zero out all the data., takes about 2 hours there as well.
5- Now run disk utilities from the Leopard DVD or the computer or booted up drive you used to do all this., if you can not fix permission of th volume you seen to reformat the Drive again 7 pass!, could take 4 hours.
Finally you will be able re clone it, and run disk tools after a days work no one warned you about.
*This disk utilities operation may take about 1 hour but say 11, and look like this below;*
Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Butterfly.mailstationery/Contents/Resources/bottom.jpg", should be 80, group is 99.
Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Butterfly.mailstationery/Contents/Resources/content.html", should be 80, group is 99.
Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Butterfly.mailstationery/Contents/Resources/Description.plist", should be 80, group is 99.
Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Butterfly.mailstationery/Contents/Resources/English.lproj/DisplayName.stri ngs", should be 80, group is 99.
Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Butterfly.mailstationery/Contents/Resources/thumbnail.png", should be 80, group is 99.
Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Butterfly.mailstationery/Contents/Resources/top.jpg", should be 80, group is 99.
Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/English.lproj/DisplayName.strings", should be 80, group is 99.
Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Flower.mailstationery/Contents/Resources/bg_letter.jpg", should be 80, group is 99.
Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Flower.mailstationery/Contents/Resources/bg_pattern.jpg", should be 80, group is 99.
Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Flower.mailstationery/Contents/Resources/bottom.jpg", should be 80, group is 99.
Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Flower.mailstationery/Contents/Resources/content.html", should be 80, group is 99.
Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Flower.mailstationery/Contents/Resources/Description.plist", should be 80, group is 99.
Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Flower.mailstationery/Contents/Resources/English.lproj/DisplayName.strings ", should be 80, group is 99.
*Good luck*
*My ADVISE:* if you experienced these problems, as above, reformatting by zeroing out the data works. as for those who want Leopard. *DO NOT UPGRADE but install a RETAIL version of LEOPARD* until apple has a update,
I read posts where people who have the retail copy (full DVD) have not experienced these problems, mine was a upgrade from Tiger since i got a mac in the last 30 days.
WARNING: it has been hard to trust Apple fanatics with these things now days, many posts are denials to things not working so i could be wrong there as well, been honest saves time is all i can advise them.
If anyone has beter advise please do post it.

And what is yaml all about, shows up in disk utilities for hundreds if not thousands of issues?
showed up as a user as well.
Group differs on "System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/share/ri/1.8/system/ WEBrick/HTTPAuth/proxybasicauth-i.yaml", should be 0, group is 99.
Group differs on "System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/share/ri/1.8/system/ WEBrick/HTTPAuth/ProxyAuthenticator/cdesc-ProxyAuthenticator.yaml", should be 0, group is 99.
Group differs on "System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/share/ri/1.8/system/ WEBrick/HTTPAuth/ProxyBasicAuth/cdesc-ProxyBasicAuth.yaml", should be 0, group is 99.
Group differs on "System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/share/ri/1.8/system/ WEBrick/HTTPAuth/ProxyDigestAuth/cdesc-ProxyDigestAuth.yaml", should be 0, group is 99.
Group differs on "System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/share/ri/1.8/system/ WEBrick/HTTPAuth/ProxyDigestAuth/check_uri-i.yaml", should be 0, group is 99.
Group differs on "System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/share/ri/1.8/system/ WEBrick/HTTPAuth/UserDB/cdesc-UserDB.yaml", should be 0, group is 99.
Group differs on "System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/share/ri/1.8/system/ WEBrick/HTTPAuth/UserDB/get_passwd-i.yaml", should be 0, group is 99.
Group differs on "System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/share/ri/1.8/system/ WEBrick/HTTPAuth/UserDB/make_passwd-i.yaml", should be 0, group is 99.
Group differs on "System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/share/ri/1.8/system/ WEBrick/HTTPAuth/UserDB/set_passwd-i.yaml", should be 0, group is 99.
Group differs on "System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/share/ri/1.8/system/ WEBrick/HTTPProxyServer/cdesc-HTTPProxyServer.yaml", should be 0, group is 99.
------------------------------------------------------------

Does anyone have a mail problem with iOS 5? every time I need to send an email it closes and in the general settings it also closes

every time I enter to the general settings of my ipad 2 with ios 5 and then to mail it closes..... also when I try to send an email....I have already restarted the ipad.. what can i do?

try to check the email id of the guy you are trying to send the email to as i had the same problem i had written yahoo.com when it was yahoo.in

Not able to download files like word, pdf etc from the mail and also in general google search.

the download option in general is not working, not able to browse the folder for downloading.
.using windows 7

Perform the suggestions mentioned in the following articles:
* [https://support.mozilla.com/en-US/kb/Template:clearCookiesCache Clear Cookies & Cache]
* [[How to clear the cache#w_clear-the-cache|Clear the Network Cache]]
* Start Firefox in -> [[Safe Mode]] to check if your add-ons/extension are causing the problems.
* Also see this article -> [[Troubleshooting extensions and themes]]
Check and tell if you are able to download a file while using Firefox -> [[Safe Mode]].

Fiji Timezone and Timezones in general

Similar Messages

Maybe you are looking for