File Adapter Display
Hi
We are using SAP PI 7.0 and have 3 environments, development, test and Production.
what I'm trying to find out is why the communication channel file Adapter we have in developemt is different from the one in production.
both systems are running the same version of java and are patched to the same level
The development file adapter has 4 tabs for 'Source', 'Processing', 'Content Conversion' and 'Advanced'
The production file adapter has a single screen
additionally the development file adapter has 'Advanced Selection for Source File' functionality and the production version doesn't
Is there some configuration or process to change the display/functionality of the File adapter ?
thank you
1. can you confirm if all these servers are on the same patch / SP level? Different patches or SP level can change the screen layout.
2. Also note that some tabs are enabled only when a particular option is selected. ex. content conversion tab will come only if you have chosen File Content Conversion in your adapter
Similar Messages
-
Mapping problem due to FCC in sender file adapter
Hi All
I am doing File( Flat File ) to RFC Scenario.it is working fine..
the problem comes in mapping with multiple records.
FCC at sender file adapter is used
my Data Type are :
Source DT Target RFC import parameter(table).
E2ED20* ITEM*
KEY VBELN
VBELN POSNR
E2E24* CHARG
KEY
POSNR
CHARG
<b>*->>multiple occurence
E2ED20 and E2E24 are 2 segment ,KEY is used in FCC to identify E2EDL20 & E2EDL24</b>
My source text file is like this :
E2EDL20 0200
E2EDL24 xyz
E2EDL20 0201
E2EDL24 abc
E2EDL24 efg
E2EDL24 mln
E2EDL20 0202
E2EDL24 gty
so the payload should be :
0200 xyz
0201 abc
0201 efg
0201 mln
0202 gty
in <i>FCC ignoer record set= true</i>
otherwise is not called...
i try to use split by value & use oneasmany , not helpfull.
in message mapping when i checked th field VBELN -> display queue
i am getting an array 0200
0201
0202 in white fields
thanks & regards
Ashutosh Rawat<b>Source payload</b>
<?xml version="1.0" encoding="utf-8" ?>
- <ns:MT_MATNO_FILE xmlns:ns="urn:abc:xxx">
- <E2ED20>
<KZ>E2EDL20</KZ>
<FIELD1>020</FIELD1>
<b><VBELN>0083662685</VBELN></b>
</E2ED20>
- <E2E24>
<KZ>E2EDL24</KZ>
<FIELD2>020</FIELD2>
<POSNR>900001</POSNR>
<CHARG>1078629</CHARG>
<LFIMG>3200</LFIMG>
<MEINS>PCE</MEINS>
</E2E24>
- <E2E24>
<KZ>E2EDL24</KZ>
<FIELD2>020</FIELD2>
<POSNR>900002</POSNR>
<CHARG>1078630</CHARG>
<LFIMG>1895</LFIMG>
<MEINS>PCE</MEINS>
</E2E24>
- <E2E24>
<KZ>E2EDL24</KZ>
<FIELD2>020</FIELD2>
<POSNR>900003</POSNR>
<CHARG>1079145</CHARG>
<LFIMG>1883</LFIMG>
<MEINS>PCE</MEINS>
</E2E24>
- <E2E24>
<KZ>E2EDL24</KZ>
<FIELD2>020</FIELD2>
<POSNR>900004</POSNR>
<CHARG>1079146</CHARG>
<LFIMG>3195</LFIMG>
<MEINS>PCE</MEINS>
</E2E24>
- <E2ED20>
<KZ>E2EDL20</KZ>
<FIELD1>020</FIELD1>
<b> <VBELN>0083662648</VBELN></b>
</E2ED20>
- <E2E24>
<KZ>E2EDL24</KZ>
<FIELD2>020</FIELD2>
<POSNR>900011</POSNR>
<CHARG>1001450</CHARG>
<LFIMG>2946</LFIMG>
<MEINS>8PC</MEINS>
</E2E24>
- <E2ED20>
<KZ>E2EDL20</KZ>
<FIELD1>020</FIELD1>
<b> <VBELN>0083673936</VBELN></b> </E2ED20>
- <E2E24>
<KZ>E2EDL24</KZ>
<FIELD2>020</FIELD2>
<POSNR>900012</POSNR>
<CHARG>1073953</CHARG>
<LFIMG>2458</LFIMG>
<MEINS>PCE</MEINS>
</E2E24>
</ns:MT_MATNO_FILE>
<b>at target what required is</b>
<item>
<b><VBELN>0083662685</VBELN></b>
<POSNR>900001</POSNR>
</item>
<item>
<b><VBELN>0083662685</VBELN></b>
<POSNR>900002</POSNR>
</item>
<item>
<b><VBELN>0083662685</VBELN></b>
<POSNR>900003</POSNR>
</item>
<item>
<b><VBELN>0083662685</VBELN></b>
<POSNR>900004</POSNR>
</item>
<item>
<b><VBELN>0083662648</VBELN></b>
<POSNR>900011</POSNR>
</item>
<item>
<b><VBELN>0083673936</VBELN></b>
<POSNR>900012</POSNR>
</item>
in Sender FCC
E2ED20.fieldFixedLengths 7,76
E2ED20.fieldNames KZ,VBELN
E2ED20.keyFieldValue E1EDL20
E2ED20.endSeparator 'nl'
E2E24.fieldFixedLengths 7,24,13,7,3
E2E24.keyFieldValue E1EDL24
E2E24.fieldNames KZ,POSNR,CHARG,LFIMG,MEINS
E2E24.endSeparator 'nl'
ignoreRecordsetName true
source file is already there...
Message was edited by:
ashutosh rawat -
PDF files in sender file adapter
Hi,
Can XI pick up pdf files (.pdf) from a folder using File Adapter?
If yes can u send me some blogs on this?
Thanks in advance.Hi,
It can be done by bypassing the payload from Integrationg engine.In this case this case XI will not process the PDF file but jus picks up the file from sender side and places it on the target side with no translations and message processing.No IR is required in this case.ID is enough.The file go thorough Adapter Engine it self.
Jus follow the link provided it works.
https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/filetofilewithoutusingwithIntegration+Repository
But if u want to read the contents of the PDF also then there is no other way than writing the Javabased Moudle and configure it .
Thanks,
Ram. -
Problem in sender file adapter
Hi all,
I have a sender file adapter using ftp with processing mode delete. But my input file is not getting deleted. In RWB, the adapter satus is green with msg processed sucessfully. I tried with a file name that is not available in the ftp folder, but still the adapter status is green with msg processed succesfully.
Help me debug this error.
Regards,
Jai Shankar.Are you using Content conversion ?
If adapter monitoring is green, and shows processed successfully, then if you have any errors , you can see in the RWB->Message Monitoring->Audit Log (Message display Tool).
If there is no error, then try to do the cache refresh as I told. Ask Admin help for that. Restarting a Adapter engine may help you here/
Regards,
moorthy -
Problem in Sender File Adapter using FCC with Variable structure
Hi Experts,
Hi Experts,
I have facing an issues while using FCC in Sender File adapter. Below are the configs for the same:-
Recordset structure required is ==HEADER,1,DATA,*,TRAILER,1
Recordset per message == *
Key Field Name == Key
(Sorry i dont know how to insert screen shot here..pls tell me how can i insert screen shots here on sdn)
HEADER.fieldSeparator ,
HEADER.endSeparator u2018nlu2019
HEADER.fieldNames Key,x,y,zu2026
HEADER.keyFieldValue 1
HEADER.keyFieldInStructure ignore
HEADER.fieldContentFormatting trim
HEADER.additionalLastFields ignore
HEADER.missingLastFields ignore
DATA.fieldSeparator
DATA.endSeparator
DATA.fieldNames
DATA.keyFieldValue
DATA.keyFieldInStructure
DATA.fieldContentFormatting
DATA.additionalLastFields
DATA.missingLastFields
Using same variables for Trailer record as well.
Source CSV file which i am picking:-
ADSE ,RASD,replan Contact ,2 0080509 0 8:43:25 ,
EMPL ,0011111, S Top Up ,20080401 ,20080430 ,sdf , 00000000431250 ,2007 , , , , , ,20080414 18:07:35,
EMPL ,0222222, r Cash Award ,20070701 ,20070703 ,ded , 00000000023509 ,2007 , , , , , ,20080414 18:09:31,
EMPL ,0233333, Cash Award ,20070801 ,20070831 ,df , 00000000044057 ,2007 , , , , , ,20080414 18:10:56,
EMPL ,0244444, Cash Award ,20080101 ,20080111 ,sf , 00000000026717 ,2007 , , , , , ,20080414 18:08:29,
BTRL , 5140,
When i tested the scenario and monitored it using MDT in CC monitoring tool its giving me below mentioned error.
The XML page cannot be displayed
Cannot view XML input using style sheet. Please correct the error and then click the Refresh button, or try again later.
XML document must have a top level element. Error processing resource 'http://myurlname/mdt/me...
However if i change the occurence of DATA as some specific value for eg 4 instead of * it works fine.
Kindly help me in solving this problem.
Thanks,
Aditya VermaHi Madan,
Thanks a lot for giving me the way to this. But when i tested this with the below file its giving me the same error. Please let me know if i need to do any changes to the parameters mentioned above:-
ADSE ,ASDA,Sha replan Fr ont Feed Contact ,2 0080509 0 8:43:25 ,
EMPL ,0011111, Cash Top Up ,20080401 ,20080430 ,TPV , 00000000431250 ,2007 , , , , , ,20080414 18:07:35,
EMPL ,0222222, r Cash Award ,20070701 ,20070703 ,TPV , 00000000023509 ,2007 , , , , , ,20080414 18:09:31,
EMPL ,0233333, r Cash Award ,20070801 ,20070831 ,TPV , 00000000044057 ,2007 , , , , , ,20080414 18:10:56,
EMPL ,0244444, Cash Award ,20080101 ,20080111 ,TPV , 00000000026717 ,2007 , , , , , ,20080414 18:08:29,
EMPL ,0255555, Cash Award ,20080301 ,20080320 ,TPV , 00000000027870 ,2007 , , , , , ,20080414 18:08:25,
EMPL ,0266666, Cash Award ,20071001 ,20071020 ,TPV , 00000000020681 ,2007 , , , , , ,20080414 18:09:31,
EMPL ,0877777, Cash Top Up ,20080401 ,20080430 ,TPV , 00000000036000 ,2007 , , , , , ,20080414 18:07:05,
EMPL ,0888888, Leaver Cash Award ,20071201 ,20071231 ,TPV , 00000000157200 ,2007 , , , , , ,20080414 18:11:29,
EMPL ,0899999, S Leaver Cash Award ,20080301 ,20080331 ,TPV , 00000000153530 ,2007 , , , , , ,20080414 18:07:42,
EMPL ,0800000, S Leaver Cash Award ,20070701 ,20070731 ,TPV , 00000000012234 ,2007 , , , , , ,20080414 18:08:34,
BTRL , 5140,
This the original csv file which i'll get in live. Kindly suggest as ur solution worked with other file but not working with this scv file.
Thanks a lot,
Aditya. -
Email attachment name in sender mail adapter to the receiver file adapter
HI ,
Ths is regarding email to file scenario. I am trying to create file (in rceiver file adapter) with the same name as the email attachment that i read from mail sender adapter. I want ro use adapter module for this. I could find from blogs that there is module - GetAttachmentName - available that i can use for this in sender mail adapter.
Can you please let me know what whetehr i neeed to mention any module key and parameters for this.
I assume , i need to do following steps :Please confirm.
1. i can use this module - after payload swap module and before standard mail adapter module in sender mail adapter
2. select ASMA option in advanced tab in sender mail adapter
3. In receiver file adapter select ASMA option in advanced tab in sender mail adapter
4. Also select file name option in ASMA in sender mail adapter
Thanks,
VamsiHi Vamsi,
your scenario is also described here: Re: sender mail adapter - attachment name
If you use the Module getAttachmentName, which is described here,
http://wiki.sdn.sap.com/wiki/display/XI/AdapterModulePI7.0GetAttachmentName
your scenario should work as you described it.
You just need to make sure that the Attachment Name that you read in the first place, is mapped to the Filename Attribute of the
Fileadapter (http://sap.com/xi/XI/System/File/FileName).
regards,
Daniel -
Hi
I am using a File Adapter created to read a file using OSB 11.1.1.3.0. But after i publish that osb project, i am getting the below warning and file is not been polled by the proxy.
####<Feb 23, 2011 10:08:30 AM IST> <Warning> <JCA_FRAMEWORK_AND_ADAPTER> <wipro-e16351a68> <AdminServer> <[ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <dcc2d8a908de630a:59887477:12e50cc23d3:-7ff2-0000000000000084> <1298435910015> <BEA-000000> <PollWork::run exiting, Worker thread will die>
After 600 secs i could see StuckThread error in server.
####<Feb 23, 2011 10:15:01 AM IST> <Error> <WebLogicServer> <wipro-e16351a68> <AdminServer> <[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <dcc2d8a908de630a:59887477:12e50cc23d3:-7ff2-0000000000000092> <1298436301203> <BEA-000337> <[STUCK] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)' has been busy for "601" seconds working on the request "weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl@dd20cd", which is more than the configured time (StuckThreadMaxTime) of "600" seconds. Stack trace:
java.lang.Object.wait(Native Method)
oracle.tip.adapter.file.inbound.FilesToProcess.dequeueToProcess(FilesToProcess.java:101)
oracle.tip.adapter.file.inbound.ProcessWork.run(ProcessWork.java:269)
weblogic.work.ContextWrap.run(ContextWrap.java:41)
weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Please help what is going wrong in my approach.
Thanks,
SeshaI even tired creating a new WM thread and assigned to this proxy.
I have chosen MaxThreadsConstraint option with Maximum of 5 concurrent thread.
Also i have enabled Ignore Stuck Threads in that WM thread.
Now i dont see any thread stuck in the server log, but sametime the file is not been picked by the Proxy which means the error is suppressed alone from displaying in logs..
Thanks,
Sesha -
Need help with a simple process with FTP Adapter and File Adapter
I am trying out a simple BPEL process that gets a file in opaque mode from a FTP server using a FTP adapter and writes it to the local file system using a File Adapter. However, the file written is always empty (zero bytes). I then tried out the FTPDebatching sample using the same FTP server JNDI name and this work fine surprisingly. I also verified by looking at the FTP server logs that my process actually does hit the FTP server and seems to list the files based on the filtering condition - but it does not issue any GET or RETR commands to actually get the files. I am suspecting that the problem could be in the Receive, Assign or Invoke activities, but I am not able identify what it is.
I can provide additional info such as the contents of my bpel and wsdl files if needed.
Would appreciate if someone can help me with this at the earliest.
Thanks
Jaypersiandude wrote:
Topic: Need help with if, else, and which statements and loops.
How would I display 60 < temp. <= 85 in java
System.out.println("60 < temp. <= 85 in java");
another question is how do I ask a question like want to try again (y/n) after a output and asking that everytime I type in yes after a output and terminate when saying No.Sun's [basic Java tutorial|http://java.sun.com/docs/books/tutorial/]
Sun's [New To Java Center|http://java.sun.com/learning/new2java/index.html].Includes an overview of what Java is, instructions for setting up Java, an intro to programming (that includes links to the above tutorial or to parts of it), quizzes, a list of resources, and info on certification and courses.
[http://javaalmanac.com|http://javaalmanac.com]. A couple dozen code examples that supplement [The Java Developers Almanac|http://www.amazon.com/exec/obidos/tg/detail/-/0201752808?v=glance].
jGuru. A general Java resource site. Includes FAQs, forums, courses, more.
JavaRanch. To quote the tagline on their homepage: "a friendly place for Java greenhorns." FAQs, forums (moderated, I believe), sample code, all kinds of goodies for newbies. From what I've heard, they live up to the "friendly" claim.
Bruce Eckel's [Thinking in Java|http://mindview.net/Books/DownloadSites] (Available online.)
Joshua Bloch's [Effective Java|http://www.amazon.com/Effective-Java-2nd-Joshua-Bloch/dp/0321356683/ref=pd_bbs_1?ie=UTF8&s=books&qid=1214349768&sr=8-1]
Bert Bates and Kathy Sierra's [Head First Java|http://www.amazon.com/exec/obidos/tg/detail/-/0596004656?v=glance].
James Gosling's [The Java Programming Language|http://www.bookpool.com/sm/0321349806]. -
How to customize the File Adapter to put the header line in a variable?
I have a file in which the first line contains the number of records contained by the file itself.
Like this:
4
record1
record2
record3
record4
where each record is a delimited list of values
I need to validate that the records are actually 4.
in the documentation of the File Adapter I see that you can declare the first line as "header", but I have the impression that in this case it would be simply ignored, and not stored in a variable for later use......
Is this correct?
Any trick or workaround?
thank you soooo much!it worked like a charm,
here is the XSD I have used:
http://www.javamonamour.org/2010/12/soa-sutie-file-adapter-parsing-complex.html
( I don't seem to be able to display correctly XML in this post :o( ) -
Need to get the Mail attachment name as it is to the receiver file adapter
I am doing a Mail to File scenario. I need to get the attachment from the mail and store it on the file server. I am using the PayloadSwap bean in the sender mail adapter. My requirement is to carry forward the attachement name as it is to the receiver file adapter side and store the file with the same name.
Did any one try doing this? I was looking at developing an adapter module but got struck as I could not find whether the attachement name is stored in the XI payload after it has got swapped using the swap bean.
Any help would be appreciated.
VJOops pressed the send key. Take two.
This is becoming a damn nightmare. When I run the adapter I am getting ModuleExceptions. Can you pass your eyes over these Java config settings to see what I am doing wrong. Using NWDS CE 7.1 with PI 7.1 both at SP07. All the imports were taken from PI 7.1 after SP07 was applied. The build id of NWDS is
SAP NetWeaver Developer Studio
SAP NetWeaver 7.1 Composition Environment SP07 PAT0001
Build id: 200901152336
APPLICATION.XML
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE application PUBLIC "-//Sun Microsystems, Inc.//DTD J2EE Application 1.3//EN"
"http://java.sun.com/dtd/application_1_3.dtd">
<application>
<display-name>MailPOP_EAR</display-name>
<description>EAR description</description>
<module>
<ejb>MailPOP_EJB.jar</ejb>
</module>
</application>
APPLICATION-J2EE-ENGINE.xml
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE application-j2ee-engine SYSTEM "application-j2ee-engine.dtd">
<application-j2ee-engine>
<reference reference-type="hard">
<reference-target provider-name="sap.com" target-type="service">engine.security.facade</reference-target>
</reference>
<reference reference-type="hard">
<reference-target provider-name="sap.com" target-type="library">engine.j2ee14.facade</reference-target>
</reference>
<reference reference-type="hard">
<reference-target provider-name="sap.com" target-type="service">com.sap.aii.af.svc.facade</reference-target>
</reference>
<reference reference-type="hard">
<reference-target provider-name="sap.com" target-type="interface">com.sap.aii.af.ifc.facade</reference-target>
</reference>
<reference reference-type="hard">
<reference-target provider-name="sap.com" target-type="library">com.sap.aii.af.lib.facade</reference-target>
</reference>
<reference reference-type="hard">
<reference-target provider-name="sap.com" target-type="library">com.sap.base.technology.facade</reference-target>
</reference>
<fail-over-enable mode="disable" />
</application-j2ee-engine>
EJB-J2EE-ENGINE.XML
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE ejb-j2ee-engine SYSTEM "ejb-j2ee-engine.dtd">
<ejb-j2ee-engine>
<enterprise-beans>
<enterprise-bean>
<ejb-name>GetMailAttachment</ejb-name>
<jndi-name>GetMailAttachment</jndi-name>
<session-props/>
</enterprise-bean>
</enterprise-beans>
</ejb-j2ee-engine>
EJB-JAR.XML
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE ejb-jar PUBLIC "-//Sun Microsystems, Inc.//DTD Enterprise JavaBeans
2.0//EN"
"http://java.sun.com/dtd/ejb-jar_2_0.dtd">
<ejb-jar>
<description>EJB JAR description</description>
<display-name>EJB JAR</display-name>
<enterprise-beans>
<session>
<ejb-name>GetMailAttachment</ejb-name>
<home>com.sap.aii.af.lib.mp.module.ModuleHome</home>
<remote>com.sap.aii.af.lib.mp.module.ModuleRemote</remote>
<local-home>com.sap.aii.af.lib.mp.module.ModuleLocalHome</local-home>
<local>com.sap.aii.af.lib.mp.module.ModuleLocal</local>
<ejb-class>sample.GetMailAttachment</ejb-class>
<session-type>Stateless</session-type>
<transaction-type>Container</transaction-type>
</session>
</enterprise-beans>
</ejb-jar>
SENDER MAIL ADAPTER modules
1 AF_Modules/PayloadSwapBean Local EB 1
2 GetMailAttachment Local EB 2
3 sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean Local EB 3
1 swap.keyName payload-name
1 swap.keyValue MailAttachment-1
RECEIVER FILE MODULES
1 localejbs/AF_Modules/DynamicConfigurationBean Local Enterprise Bean 1
2 localejbs/CallSapAdapter Local Enterprise Bean 2
1 key.0 write http://sap.com/xi/XI/System/File FileName
1 value.0 message.interface
VARIABLE FILENAME SUBST WITH ASMA TURNED ON
fName message:interface_name
JAVA SOURCE
package sample;
import javax.ejb.CreateException;
import javax.ejb.SessionBean;
import javax.ejb.SessionContext;
import com.sap.aii.af.lib.mp.module.Module;
import com.sap.aii.af.lib.mp.module.ModuleContext;
import com.sap.aii.af.lib.mp.module.ModuleData;
import com.sap.aii.af.lib.mp.module.ModuleException;
import com.sap.engine.interfaces.messaging.api.Message;
import com.sap.engine.interfaces.messaging.api.MessagePropertyKey;
import com.sap.engine.interfaces.messaging.api.TextPayload;
import com.sap.engine.interfaces.messaging.api.XMLPayload;
import com.sap.aii.af.service.cpa.Channel;
@ejbHome <{com.sap.aii.af.lib.mp.module.ModuleHome}>
@ejbLocal <{com.sap.aii.af.lib.mp.module.ModuleLocal}>
@ejbLocalHome <{com.sap.aii.af.lib.mp.module.ModuleLocalHome}>
@ejbRemote <{com.sap.aii.af.lib.mp.module.ModuleRemote}>
@stateless
<code>GetMailAttachment</code>
@SuppressWarnings("unused")
public class GetMailAttachment implements SessionBean, Module {
private static final long serialVersionUID = 7612238514043673502L;
private SessionContext myContext;
private MessagePropertyKey myFileName;
public void ejbRemove() {
public void ejbActivate() {
public void ejbPassivate() {
public void setSessionContext(SessionContext context) {
myContext = context;
@throws CreateException
public void ejbCreate() throws CreateException {
public void getMessageProperty(MessagePropertyKey FileName) {
myFileName = FileName;
@param moduleContext
Contains data of the module processor that might be important
for the module implementation such as current channel ID
@param inputModuleData
Contains the input XI message as principal data plus eventual
set supplemental data
@return ModuleData Contains the (changed) output XI message. Might be the
response message if the module is the last in the chain.
@exception ModuleException
Describes the cause of the exception and indicates whether
an retry is sensible or not.
@SuppressWarnings("deprecation")
public ModuleData process(ModuleContext moduleContext,
ModuleData inputModuleData) throws ModuleException {
try {
Message msg = (Message) inputModuleData.getPrincipalData();
TextPayload payload = msg.getDocument();
String contentType = payload.getContentType();
// Content Type could be something like
// text/plain;charset="UTF-8";name="file.txt"
contentType = contentType.replaceAll("\"", "");
int i = contentType.lastIndexOf("=") + 1;
String fileName = contentType.substring(i);
msg.setMessageProperty(myFileName, fileName);
inputModuleData.setPrincipalData(msg);
} catch (Exception e) {
return inputModuleData;
JAVA ERRORS
2009-02-04 11:41:14 Information Mail: calling the module processor for channel LMK_Common_Mail_Sender
2009-02-04 11:41:14 Information Swap: swapping by payload-name ? MailAttachment-1
2009-02-04 11:41:14 Information Swap: successfully swapped
2009-02-04 11:41:14 Information Mail: message leaving the adapter (call)
2009-02-04 11:41:14 Information The application tries to send an XI message asynchronously using connection AFW.
2009-02-04 11:41:14 Information Backward validation is enabled
2009-02-04 11:41:14 Error Unable to validate the message with message ID 8702df71-f254-11dd-9b9b-001a64a73518
2009-02-04 11:41:14 Error Returning to application. Exception: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Content is not allowed in prolog.
2009-02-04 11:41:14 Error Mail: error occured: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Content is not allowed in prolog.
2009-02-04 11:41:14 Error Mail: error occured: com.sap.aii.af.lib.mp.module.ModuleException -
Receiver File Adapter - FTPEx: 550 Access denied
Hi Experts,
In my receiver file adapter scenario I'm getting 550 Access denied in RWB.
I am a little confused here because I could access the FTP client from my desktop using the same User and Password informed in the Receiver CC. I also could drag and drop a file there.
Here you have Detail Display in RWB, it seems that at least the user is working fine for PI also:
Success: Connecting to FTP server "<FTP IP>"
Success: Write to FTP server "192.168.10.85", directory "\Transportadoras\10326750000101\", file "Nfe_teste.xml"
Success: Transfer: "TXT" mode, size 8881 bytes, character encoding UTF-8
Error: Attempt to process file failed with An error occurred while connecting to the FTP server '192.168.10.85:21'. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 550 Access denied.'. For details, contact your FTP server vendor.
Error MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: An error occurred while connecting to the FTP server '192.168.10.85:21'. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 550 Access denied.'. For details, contact your FTP server vendor.
Regards,
Daniela
Edited by: Daniela Machado on Aug 11, 2010 10:18 PMHi Daneial,
This is an issue due to any firewall or proxy between your Xi system and the FTP.In this case the direct logon
works with same user but when XI tries to create file at runtime you get this error due to network issues.
To resolve this contact your Basis/Network guys and
1. Set the permissions to FTP User you are using as 777 rights(full access to read , write and delete)
2.If you have access to PI server, try to telnet /connect to ftp using command prompt (open ftp .....) the FTP server form there, you should see the same error there , inform this to your network guys.
3.Clear all the files places already in the ftp (take backup) and test afresh after permissions are set by basis team.
Regards,
$rinivas -
Iam using File adapter(FTP) at source.
Could not see mesage id in communication chaneel monitoring
also MONI shows no messages to display.
What cud be the issue??
Any thoughts please.I have tried changing from Test mode to Archive and specified the locatio,
still same problem
no msgId in Communication Channel Monitoring, no msgs to display in MONI.
this is my record structure
it is csv file no header,no trailer
it ia having just these values
AB11111,0123456789
AB11112,0123456768
mt Datatype looks like
DT_xxx
LLLL (I just put his as Record Set Name in DT)
userid
extension
Iam FTP with FCC
DocumentName mt_xxx
Document Namespace http://abcd/def
Record setStructure LLLL,*
Record Sequence Ascending
ignoreRecordSetName true
LLLL.fieldNames userid,extension
LLLL.fieldSeperator ,
LLLL.fieldFixedLengths 8,10
Under Processingtab,
File Transfer mode Text
Plloing Interval ETC
Under Source
Username, pwd,Connectmode Text -
Polling interval in file adapter.
Hi,
I have a doubt regarding the file adapter polling interval.
Suppose we get a file of size 512 MB and PI file adapter taking long time (say 15 Min) to process it, we have a polling interval of 10 min.
I have a 2 doubt in this case.
1. what will happen in the next polling interval. because the older file still is in process and it is still in the source folder location.
2. if at the same time there is new file get places in same folder location. then how the file adapter behave in this case. Is it start picking the second file or again poll the incomplete file.
I want to know that is PI maintaining some lock while processing some file from source folder.
regards,
NavneetHi,
I guess normally it should process both files, earlier one which is in process and the new one as well (it depends your selection string in file name scheme).
Also refer thsi Wiki to help in avoiding duplicate file processing:
http://wiki.sdn.sap.com/wiki/display/XI/DifferentwaystokeepyourInterfacefromprocessingduplicate+files
Regards,
Divyesh Vasani -
Get File Name in UDF from file adapter sender
Hi,
I've looking for this solution, but I couldn't find any usefull information.
I want to obtain the name of the file, sended by the file adapter.. and later use it in the mapping logic.
I've readed about sustitution... any help?
Thanks.HI Stortoni,
Take a look at these blogs:
http://wiki.sdn.sap.com/wiki/display/XI/CombiningthreedifferentaspectsofPIinoneshot
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
/people/sap.user72/blog/2005/07/15/copy-a-file-with-same-filename-using-xi
Regards,
---Satish -
File adapter OS command line - Calling a command remotely ??
Hi,
We have a scenario where in which receiver file adapter after putting a file on the FTP , a subsequent XML loader needs to be called which would load data into the client legacy ERP system.
There seems to be some idea about doing it through file adapter OS command line.
The problem is the how to call this loader command remotely from our file adapter OS command line.
Any help would be appreciated ???>> The problem is the how to call this loader command remotely from our file adapter OS command line.
The below link might be helpful ...
http://wiki.sdn.sap.com/wiki/display/XI/SAPXIFileAdapterOSCommandLine+Feature
Maybe you are looking for
-
Streaming Audio or internet radio
Is it possible to listen to streaming audio on the BB pearl? What about internet radio? And if it is possible can someone give me some links so I can try it out on my phone? Thanks. Solved! Go to Solution.
-
We are in the process of refiling our contracts for a new look-and-feel. The vendor is supplying us with PDFs, but they import into Documaker as embedded graphics. The problem is: we have a lot of text on them that we want to make dynamic (depending
-
Why am I getting the error " Could not complete your request because 3D functionality is currnetly disabled due to OpenGL being diabled" PLEASE HELP...
-
I have a data base of about 2300 entries for a mailing list Tonight as I was entering some updates either it would crash if I tried to save the info. I tried both save, save as and the red save button, all would crash and ask to reopen and then it wo
-
Navigation to "Multi Query Data Explorer portal takes more time than single Query Data Explorer. Is there any way to optimize the screen navigation? I have copied the "Custom Control Central Portal" from Demo environment.