File adapter status

Iam using File adapter(FTP) at source.
Could not see mesage id in communication chaneel monitoring
also MONI shows no messages to display.
What cud be the issue??
Any thoughts please.

I have tried changing from Test mode to Archive and specified the locatio,
still same problem
no msgId in Communication Channel Monitoring, no msgs to display in MONI.
this is my record structure
it is csv file no header,no trailer
it ia having just these values
AB11111,0123456789
AB11112,0123456768
mt Datatype looks like
DT_xxx
LLLL (I just put his as Record Set Name in DT)
     userid
      extension
Iam FTP with FCC
DocumentName mt_xxx
Document Namespace http://abcd/def
Record setStructure LLLL,*
Record Sequence Ascending
ignoreRecordSetName   true
LLLL.fieldNames       userid,extension
LLLL.fieldSeperator   ,
LLLL.fieldFixedLengths 8,10
Under Processingtab,
File Transfer mode Text
Plloing Interval ETC
Under Source
Username, pwd,Connectmode Text

Similar Messages

Dynamic File Adapter status - Active or Inactive

Hi Experts
Is there any way to set the Sender/ Receiver File adapter status dynamically to inactive or active.
Is there any setting exists in the file adapters ? Please provide me possible solutions.
Thanks
Faheem

Hi all,
Many thnz for the response.
There is one more way of doing this as well. Just now i found that.
In the runtime workbench - Communication channel monitoring , Select the automatic control for the comminucation channel to make active or inactive .
there are options for our comm channel to run specfic date and time.
Thnz
Faheem

Change status(Active/Inactive) of file adapter by the external command

Hi, all.
Is it possible to change status(Active/Inactive) of file adapter by the external command?
Let's say, like
"$ switch_file_adapter_status.sh <File Adapter name> <active|inactive>"
or something like that.
Actually, we have the following requirement for the file adapter.
For example, we have many "file adapter to R/3" scenarios and we only want to allow data transfer between 9:00 a.m. to 9:00 p.m.(R/3 service time).
In order to achieve this requirement, one option would be to switch file adapter status between active and inactive by external command line.
And this command will be controlled by the job scheduler(like Tivoli).
Does XI(3.0 or above) have this kind of feature?
Best Regards.

Hi,
I don't think that this is possible.
But one Solution for your problem could be a job on xi who execute the Queue.
So that Adapter work the hole time and send the Message to XI Queue which process them not automatically.
And the XI Queue you can trigger with a Job like normal R/3 Jobs.
Hope that helps,
Regards,
Robin

File Adapter - Sender Problem

Hi,
While implementing a file to file interface I am facing problem in Integration Engine. Data is not passing to Integration engine, so it is not able to reach receiver.
Receiver file adapter is working fine for other scenarion like IDoc to File.
File Adapter status is Green in RWB.
I am not able to see message in SXMB_MONI
The error details in Adapter Engine is bellow
Audit Log for Message: 410424a0-c496-11da-aa48-00111120e6db
Time Stamp Status Description
2006-04-05 16:51:37 Success Channel file2file_in_channel: Send binary file "D:\usr\sap\QN7\DVEBMGS00\work\XiPattern2\testfile2in.xml". Size 209 with QoS EO
2006-04-05 16:51:37 Success Application attempting to send an XI message asynchronously using connection AFW.
2006-04-05 16:51:37 Success Trying to put the message into the send queue.
2006-04-05 16:51:37 Success Message successfully put into the queue.
2006-04-05 16:51:37 Success The application sent the message asynchronously using connection AFW. Returning to application.
2006-04-05 16:51:37 Success The message was successfully retrieved from the send queue.
2006-04-05 16:51:37 Success File "D:\usr\sap\QN7\DVEBMGS00\work\XiPattern2\testfile2in.xml" deleted after processing
2006-04-05 16:51:37 Success The message status set to DLNG.
2006-04-05 16:51:37 Error Transmitting the message to endpoint http://sapep:50000/sap/xi/engine?type=entry using connection AFW failed, due to: Received HTTP response code 404 : Not Found.
2006-04-05 16:51:37 Success The asynchronous message was successfully scheduled to be delivered at Wed Apr 05 16:56:37 GMT+05:30 2006.
2006-04-05 17:01:37 Success The message status set to WAIT.
2006-04-05 17:06:37 Success Retrying to send message. Retry: 3
2006-04-05 17:06:37 Success The message was successfully retrieved from the send queue.
2006-04-05 17:06:37 Success The message status set to DLNG.
2006-04-05 17:06:37 Error Transmitting the message to endpoint http://sapep:50000/sap/xi/engine?type=entry using connection AFW failed, due to: Received HTTP response code 404 : Not Found.
2006-04-05 17:06:37 Error The message status set to NDLV.
Please suggest the solution.
Is there any place where I can find the exact error log?
Thanks,
Smita.

Hi,
I found there was a problem with HTTP port in the URL. After fixing this, I am able to see the message in SXMB_MONI. But it is with an error. The error details is as bellow.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
<SAP:P1>af.qn7.sapep</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>no_messaging_url_found: Unable to find URL for Adapter Engine af.qn7.sapep</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error when reading the access data (URL, user, password) for the Adapter Engine af.qn7.sapep</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
In RWB->Adapter engine there is a success message, But in the RWB->Integration Engine there is an error with Error Code : AE_DETAILS_GET_ERROR.
Please suggest how to fix this. I am able to logon to XI system with user XIAFUSER.
Thanks,
Smita

File adapter problem - message in RWB HOLDING msg status

Problem in XI File adapter recver comm channel.Getting msg in RWB Adapter Engine HOLDING status.
1. No explaination in RWB Details tab, of why status Holding.
2. File does not get created, because of Holding status.
3. Cannot Resend or Cancel in RWB the message.
Sometimes the msg goes through and other times does not and is stuck.
File Adapter Parms set as:
Connection Mode: Per File Transfer
Transfer Mode: Text
File Adapter setting Max concurrency = 1 would that have anything to do with it?
File Construction Mode:Create
Put Name: Direct
Empty msg-handling: Write Empty File
Type: Text
Any ideas Why holding? and Where to see more details. 

Hey
exact same issue has been discussed today on SDN.anyways have a look at the following blog
/people/stefan.grube/blog/2006/04/27/how-to-deal-with-stuck-eoio-messages-in-the-xi-30-adapter-framework
Thanx
Aamir

Dynamic Filename in File adapter

Hi,
I am doing idoc-file scenario.I get the filename as a field in one of the segments of my idoc.Can anyone please let me know how i can get the filename from my idoc and use this filename in my file adapter.
--Thanks

Hi all,
Thanks a lot for your replies.
Please find below the inbound message that i get. Now i need to get the filename that i get in one of the segments and use that in the file adapter.
<?xml version="1.0" encoding="UTF-8" ?>
- <ZSSV_GENERIC_IDOC>
- <IDOC BEGIN="1">
- <EDI_DC40 SEGMENT="1">
 <TABNAM>EDI_DC40</TABNAM>
 <MANDT>100</MANDT>
 <DOCNUM>0000000000203015</DOCNUM>
 <DOCREL>620</DOCREL>
 <STATUS>30</STATUS>
 <DIRECT>1</DIRECT>
 <OUTMOD>2</OUTMOD>
 <IDOCTYP>ZSSV_GENERIC_IDOC</IDOCTYP>
 <MESTYP>ZSSV_GENERIC_MSG</MESTYP>
 <SNDPOR>SAPYRA</SNDPOR>
 <SNDPRT>LS</SNDPRT>
 <SNDPRN>YRACLNT100</SNDPRN>
 <RCVPOR>YXDTEST_GI</RCVPOR>
 <RCVPRT>LS</RCVPRT>
 <RCVPRN>IDES_LS1</RCVPRN>
 <CREDAT>20060420</CREDAT>
 <CRETIM>184948</CRETIM>
 <SERIAL>20060420184948</SERIAL>
 </EDI_DC40>
- <Z1SSV_ITEMS_SUMMARY SEGMENT="1">
 <IDOC_SEQ_NUM>1</IDOC_SEQ_NUM>
 <TOTAL_REC_COUNT>50</TOTAL_REC_COUNT>
 <IDOC_SEG_COUNT>50</IDOC_SEG_COUNT>
 <OUTPUT_REC_LENGTH>90</OUTPUT_REC_LENGTH>
 <INTERFACE_DESCRIPTOR>OUT_RYDER_0001</INTERFACE_DESCRIPTOR>
<HOST_FILENAME>TEST1</HOST_FILENAME>
<RECORD_DELIMITER>^</RECORD_DELIMITER>
<SEGMENT_DELIMITER>|</SEGMENT_DELIMITER>
</Z1SSV_ITEMS_SUMMARY>
In the file adapter, I have specified "%filename%.xml" as my file name and in variable substitution the reference is "payload:ZSSV_GENERIC_IDOC,1,IDOC,1,EDI_DC40,1,Z1SSV_ITEMS_SUMMARY,1,HOST_FILENAME,1".
I still get the same error "Message processing failed: Error during variable substitution: "
Waiting for your help in this matter.
Regards,

.xls ,.xlsx, .xlsm in sender file adapter

hi guys,
I have written an adapter module to read an excel file in sender file adapter...
if the input file comes as .xlsx or .xlsm wll it be able t read the same?
or do i have to change anything in the module code?
filename in sender cc is filename.*
Regards,
Teja

Hi Gurus,
How can we download data from SAP internal table to Excel file in .XLSM format?
file is having macros and header, i need to append the values from internal table to the excel file from 6th row(5 rows contains header).
when i try to use " gui_download " FM , status message in sap shows as no.of bytes transfered! but , while oppening the file it is showing currupted.
When i try to use OLE Method it is creating the file in xlsx format in stead of xlsm.
can any one please guide me how to proceed!!
Regards,
Balaji

Problem in sender file adapter

Hi all,
I have a sender file adapter using ftp with processing mode delete. But my input file is not getting deleted. In RWB, the adapter satus is green with msg processed sucessfully. I tried with a file name that is not available in the ftp folder, but still the adapter status is green with msg processed succesfully.
Help me debug this error.
Regards,
Jai Shankar.

Are you using Content conversion ?
If adapter monitoring is green, and shows processed successfully, then if you have any errors , you can see in the RWB->Message Monitoring->Audit Log (Message display Tool).
If there is no error, then try to do the cache refresh as I told. Ask Admin help for that. Restarting a Adapter engine may help you here/
Regards,
moorthy

Problem with file content conversion in receiver file adapter

Hi All
I have a problem with file content conversion in receiver file adapter.
This is my recordset structure: Header_Record,1,Claim_Record,*,Check_Rec,1
These are the content conversion parameters:
Header_Record.fieldSeparator = ,
Header_Record.endSeparator = 'nl'
Claim_Record.fieldSeparator = ,
Claim_Record.endSeparator = 'nl'
Check_Rec.fieldSeparator = ,
Check_Rec.endSeparator = 'nl'
In SXMB_MONI, i can see that the data is correctly extracted from proxy, and correctly mapped to receiver message, and i see a checkered flag (success).
But, Adapter status is RED with the following error message:
Conversion initialization failed: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Parameter '1.fieldFixedLengths' or '1.fieldSeparator' is missing
In communication channel monitoring, i get the following error message:
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Channel has not been correctly initialized and cannot process messages
What is going wrong here? Can anyone please tell me?
Thanks
Chandra

Posted in Incorrect forum.
Posted again in Process Integration forum

Problem with fixedlenthgs in receiver file adapter

HI,
I am doing XML to flat file scenario and using mutli mapping concept without BPM.
in the receiver file adapter I am using FCC with fixedlengths,then it generated just 3 output files out of nearly 100 source files.the errored one are succcessful in the SXMB_MONI and failing in RWB-->Message moni with waiting status and MDT says that XI_J2EE_ADAPTER_FILE ,Error Code PROCESSING_ERROR .
i tried in SDN and then found something like enable the disablesecurity check box in variable substitution parameters ,then I got 4 files out.
these are my FCC params for all structures:
struc1.fieldFixedLengths
struc1.fixedLengthTooShortHandling
struc1.endSeparator
and I tried with fieldSeparator then it gives successfully all output files.
so,where is the problem?I didnt understand?
any suggestion.
thank you,
regards,
Babu Sri

Bhavesh,
I felt the same way,but assumed that ,in that way fixedlenghths wont work.
in my target structure most of the fields have 0-1 occurences ,and even in the source structure too.so,I think it might be the reason.Then I have to make all my about 60fields 1-1 madatory and using mapWithDefaultValue function, as my sources are optional.
you think it will work just using the "mapWithDefaultValue" function without changing my occurences to 1-1 in the target structure(mandatory)?infact I can try but ,cos of pain for changing like 60 fields....:) and even dont know which fields are causing the problem,so that we can apply "mapWithDefaultValue" function only on those fields.
thank you,
Babu Sri

Receiver file adapter problem in file to file scenario

My situation is: I created the scanrios with file adapters, using
FTP, the sender adapter is picking up the file, but the output file
is not been created in the path mentioned, both the adapter status
looks green, I have no error message in the sxmb_moni for this
scenario. my adapter status looks as below:
kris_scenario1_filetofile_receiverCC Receiver Adapter v2112 for
Party '', Service 'krishna_bussystem01':
Configured at 2006-05-28 20:14:19 EDT
No message processing until now
kris_scenario1_filetofile_senderCC Sender Adapter v2126 for
Party '', Service 'krishna_bussystem01':
Configured at 2006-05-28 20:11:35 EDT
History:
- 2006-05-28 20:16:25 EDT: Polling interval started. Length: 10.000 s
- 2006-05-28 20:16:25 EDT: Processing finished successfully
- 2006-05-28 20:16:25 EDT: Processing started
- 2006-05-28 20:16:15 EDT: Polling interval started. Length: 10.000 s
- 2006-05-28 20:16:15 EDT: Processing finished successfully

Moorthy,
as you suggested I checked in MDT, FYI I am doing without content coversion. from the below message I dont see any problem, so what could be a problem
The sender has 'delivered' status but the receiver has 'to be delivered' status
Receiver audit log:
2006-05-29 00:07:56 Success The message was successfully received by the messaging system. Profile: XI URL:
2006-05-29 00:07:56 Success Using connection AFW. Trying to put the message into the receive queue.
2006-05-29 00:07:56 Success Message successfully put into the queue.
Sender audit log:
2006-05-29 00:07:54 Success Send binary file "filetofile.xml" from FTP server "xx.xx.xxx.xxx:/yyyyy", size 221 bytes with QoS EO
2006-05-29 00:07:54 Success Application attempting to send an XI message asynchronously using connection AFW.
2006-05-29 00:07:54 Success Trying to put the message into the send queue.
2006-05-29 00:07:54 Success Message successfully put into the queue.
2006-05-29 00:07:54 Success The application sent the message asynchronously using connection AFW. Returning to application.
2006-05-29 00:07:54 Success The message was successfully retrieved from the send queue.
2006-05-29 00:07:54 Success File "filetofile.xml" deleted after processing
2006-05-29 00:07:54 Success The message status set to DLNG.
2006-05-29 00:07:55 Success The message was successfully transmitted to endpoint http://host:port/sap/xi/engine?type=entry using connection AFW.
2006-05-29 00:07:55 Success The message status set to DLVD.

Receiver file adapter not responding

Hi guys,
I have 2 interfaces in XI development system that make use of receiver file adapter in order to receive some .txt files. Although these communication channels used to work until yesterday, for some strange reason they stopped functioning, but only in development system. However, I cannot see any error in Runtime Workbench (Communication channel monitoring), it's status is "correctly configured and started" and has a green sign. But, when I sent a file from sender adapter, it is sent correctly, but it never gets received from receiver communication channel.
There is no error in SXMB_MONI either.
In XI production system, the same interfaces are functioning well.
Any ideas?
Best Regards
--Evaggelos

Hi Amit,
I went into Message Monitoring for this interface and I can see all the messages for the last 24 hours that should be written into a file that have status "to be delivered".
When I go into Details -->Audit Log for a single message:
2007-06-13 11:49:33 Success Processing child message of multi-message with message ID ff896d50-198a-11dc-cdfa-00145e694b16
2007-06-13 11:49:33 Success Using connection File_http://sap.com/xi/XI/System. Trying to put the message into the receive queue.
2007-06-13 11:49:33 Success Message successfully put into the queue.
And in Message Data there is the following information:
Status To Be Delivered
Repeatable Yes
Cancelable Yes
Error Category
Error Code
Start 13.06.2007 11:49:33
End
Sender Party
Sender Service TPBS_GR
Receiver Party
Receiver Service TPBS_GR
Interface http://famar.gr:LoyaltyDataMNSToSRS
MI_LoyaltyDataMNSToGR_IB
Quality of Service Exactly Once
Message b2685674-7626-5141-bfa1-13155ad0d25a
Reference
Conversation ID
Serialization Context
Direction INBOUND
Message Type Recv
Profile XI
Connection File_http://sap.com/xi/XI/System
Transport HTTP
End Point http://fmgralxi01:50000/MessagingSystem/receive/AFW/XI
Authorization
Sequential Number 0
Number of Retries 3
Failed 0
Retries 300000
Valid to
Persist Until 13.07.2007 11:49:33
Schedule Time 13.06.2007 11:49:33

File Adapter: Run OS command unix after processing message

Hi,
in file adapter configuaration, after processing message, I've configured the channel that it has to call an unix script.
The sintax in configuration is:
sh /XS0/usr/sap/XS0/DVEBMGS01/work/TEST_FILE_XI/OUT/rename_lib_contabili.sh <variable>.
I tried also without the entire path and without the sh command at start of it.
We have a XI 3.0 sp20.
I don't understand, What other I have to do.
Regards,
Antonello

Hi Carme,
I found a warning that "describes" the error...
2009-09-29 13:36:15 Success Write to file "/XS0/usr/sap/XS0/DVEBMGS01/work/TEST_FILE_XI/OUT/LIBROGIORNALE_test_mov.zip" as binary, size 7248 bytes
2009-09-29 13:36:15 Success Execute OS command "/home/xs0adm/scripts/rename_lib_contabili.sh LIBROGIORNALE_test_mov.zip"
2009-09-29 13:36:15 Warning Error when executing OS command "/home/xs0adm/scripts/rename_lib_contabili.sh LIBROGIORNALE_test_mov.zip"
2009-09-29 13:36:15 Success File processing complete
2009-09-29 13:36:15 Success MP: Leaving module processor
2009-09-29 13:36:15 Success The message was successfully delivered to the application using connection
File_http://sap.com/xi/XI/System.
2009-09-29 13:36:15 Success The message status set to DLVD.
if I try to execute this script from Unix schell or ABAP OS shell this working fine.
You have any idea?!
Thanks,
Antonello

File adapter error after updating to SP19 (INBOUND_BINDING_ERROR)

File adapter error after updating to SP19 (INBOUND_BINDING_ERROR)
Hi all,
im having some troubles after the installation of SP19 (from SP16 in NW04) with File Adapter (File->Idoc scenario).
In message monitoring (Adapter Engine), I have several messages with status "System Error". The error text is :
Received XI System Error. ErrorCode: INBOUND_BINDING_ERROR
ErrorText: ErrorStack: Error in sender agreement for party '', service 'LEGACY_DEV', interface namespace 'http://XXXXX.com/XXXXXX', interface 'INTERFACE_OB' No sender agreement found for , , , , ,
Im sure that the Integration Directory settings have not been changed. So I tried the following, but the problem persists:
- Deactivation/Activation of File Adapter channel
- check that user XIISUSER is not locked
- checked SXI_CACHE (it seems ok)
- Many CPA full refresh
- Dummy modifications of File Adapter channels (a dummy modification of the description)
- Reboot J2EE
I've seen that someone else had problems after upgrading to SP19. I'd really appreciate any suggestion of how to solve my issue.
Thank you
Manuel

Hi Prabhu,
I've already tried to restart server, but nothing happened. (Before update to SP19, the interface worked well).
This is the error log from message monitoring:
 2007-01-16 16:37:34 Success Channel cc_File_Snd_Bolle: Entire file content converted to XML format
2007-01-16 16:37:34 Success Send binary file "BOLLE_20061229142059.CSV" from FTP server "AS810T:/sapinbound", size 8733 bytes with QoS EOIO
2007-01-16 16:37:34 Success Application attempting to send an XI message asynchronously using connection AFW.
2007-01-16 16:37:34 Success Trying to put the message into the send queue.
2007-01-16 16:37:35 Success Message successfully put into the queue.
2007-01-16 16:37:35 Success The application sent the message asynchronously using connection AFW. Returning to application.
2007-01-16 16:37:35 Success The message was successfully retrieved from the send queue.
2007-01-16 16:37:35 Success File "BOLLE_20061229142059.CSV" successfully archived on FTP server "AS810T" as "/sapinbound/bolle/20070116-163735-245_BOLLE_20061229142059.CSV"
2007-01-16 16:37:35 Success The message status set to DLNG.
2007-01-16 16:37:35 Error Received XI System Error. ErrorCode: INBOUND_BINDING_ERROR ErrorText: ErrorStack: Error in sender agreement for party '', service 'LEGACY_DEV', interface namespace http://XXXXX.com/XXXXXX', interface 'INTERFACE_OB' No sender agreement found for , , , , ,
2007-01-16 16:37:35 Error Transmitting the message to endpoint http://SERVERNAME:8000/sap/xi/engine?type=entry using connection AFW failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: INBOUND_BINDING_ERROR:. 
2007-01-16 16:37:35 Success The asynchronous message was successfully scheduled to be delivered at Tue Jan 16 16:42:35 CET 2007.
2007-01-16 16:37:35 Success The message status set to WAIT.
2007-01-16 16:42:35 Success Retrying to send message. Retry: 1
After this, the system try to resend the message, and the same error appears several times.
Ty,
Manuel

File Adapter as Sender not picking the files

We configured the File Adapter as Sender, Transport Protocol =NSF and message protocol as FCC.
In OS we have folder to read the file, but SAP XI unable to read the file.
To trouble shoot this issue we copied that file into another location and reverted back to the same location then XI File adaptor is able to read the file.
Now we have compared the Attributes of the path
the only difference in file attributes
Coded character set ID . . . . . . . . :   819
CCSID 819 (decimal)
0333 (hex)
Name ISO 8859-1 ASCII
Description ISO 8859-1: Latin Alphabet Number 1Latin-1 countries and regions
Notes Related CCSID with euro is 923
able to read the file attributes:
Coded character set ID . . . . . . . . :   1252
CCSID 1252 (decimal)
04E4 (hex)
Name MS-WIN LATIN-1
SC Co-existence/Migration
FMS Subset
Registration Date
Description MS Windows, Latin-1
Notes CCSID for this code page with euro is 5348
We have tried to chage the File type as Text and File Encoding with ISO-8859-1even then its not picking the files.
Please suggest me where i am doing wrong here
Thanks,
Venkat.

Hi,
Check the file path & file name , Check the processing mode parameter which you have set?
Check the folder properties & provide all the permission ...
Finally check the communication channel status in RWB, If the problem persist try to stop & start the communication channel again..
Hope it helps...
Regards,
Kumar.

File adapter status

Similar Messages

Maybe you are looking for