File Adapter failed to write a file

Greetings,
I have a simple file adapter that writes information from a message in a pipe-delimited format. During an execution I got the following error:
file:/D:/OraBPELPM_1/integration/orabpel/domains/default/tmp/.bpel_BPELProcessAppendFile_1.0.jar/AppendFileAdapter.wsdl [ Write_ptt::Write(Root-Element) ] - WSIF JCA Execute of operation 'Write' failed due to: Translation Error. Error while translating message to native format. ; nested exception is: ORABPEL-11017 Translation Error. Error while translating message to native format. Check the error stack and fix the cause of the error. Contact oracle support if error is not fixable.
I coudn't find a before mentioned error stack in any of log file. This message is all I get and it's not enough to figure out why it fails. Any advice?
Thank you.

False alarm. I had incorrect mapping between BPEL variables.

Similar Messages

How to use File Adapter Receiver to write attachments

Hi,
i have a scenario, in which our own XInotes adapter sends an XIMessage from an IBM Lotus Notes database into XI. This XIMessage contains an XML document as application main document and several PDF files as additional attachments
On the receiver side, i must use a File Adapter to write both the XML documents and the PDF attachments into a directory.
The problem is i don't know how to use the file adapter receiver to write the attachments. In the Channel Monitoring, i can see that all PDF files are transferred to the file receiver. But the file adapter writes only the XML document into the directory.
I've also tried the AF_Modules/PayloadSwapBean, but it can only swap one PDF file into the application payload. And the file name must be hard coded in the module configuration as swap.KeyName.
Could anyone give me any ideas?
thanks a lot in advance
Xiang

hi,
receiver file adapters do not supprt attachments.
Only File Sender adapter is capable of handling attachments not the receiver.
http://help.sap.com/saphelp_nw2004s/helpdata/en/4b/a20c4cfea96b498b1e1af3f32f0670/frameset.htm
Configuring the sender FILE adapter
The sender file adapter is configured to pick the normal payload (file1.xml), which is specified in the File
access parameters, and the additional image file (file1.jpg) that is to be sent as an attachment is configured
under the Additional File(s) as shown in the screenshot below. The file type would still remain binary.
Since, by default, XI sends payload and attachments in XML format, we need to call two beans, namely the
MessageTransformBean and the PayloadSwapBean to help us is transforming the content to jpeg format
and also change the file extension.
The PayloadSwapBean module is used to replace the application payload of the XI message that holds the
data with another payload which is appended to the message as an attachment. In our case, the payload
would be file1.xml whereas the attachment would be file1.jpg
The swap module is denoted in our scenario with the module key swap. It has two parameters from the
MIME header.
regards,
pradeep.

XI 3.0 Sender File adapter fails to initialize

Hello,
File adapter fails to initialize with error:
xml.fieldFixedLengths or xml.fieldSeparator is missing.
But in the communication channel parameters definition in the 'contents conversion parameters' box I have the following:
xml.fieldSeparator ;
xml.endSeparator :

Hi,
I think you have to add:
Optional: xml.addHeaderLine 0
Obligatory: try to put the ; between quotation marks like:
Hope this helps.
Cheers,
Paul

File adapter fails to pickup the complete file

Hi Guys,
I have a file to idoc scenario configured.
Sender is an FTP server and the file type is XML
Here are the details of my file adapter
FTP Connection parameters,
Connect Mode      : Permanently
Transfer Mode     : Binary
Processing parameters,
QoS     : Exactly Once
Poll Interval     : 15 secs
Processing Mode     : Archive
Most of the time my scenario works perfectly fine.
And sometimes my file adapter fails to pickup the complete xml file and my scenario fails.
The file is read partially and my mapping throws an error.
Am i missing any parameter to be set in File adapter???
Thanks in Advance,
BBnu

>>The file is read partially and my mapping throws an error.
Thats the normal behaviour of XI,if you get a partial file,you will get a error message.
There are several work arounds for this,first of all have a script independant of XI which is running on FTP server,this script will keep on checking for modifications in file and once the file is completely written,it will rename the file to some other extension(for e.g .dat) and XI file adapter will only pick .dat file,this will make sure that only complete files are picked up.
Second option is to have a tag all the way in the end of XML which says EOF(of any other character),in your mesage mappin create the root node of target only if this last tag is EOF.Since in incomplete file you will not have this last tag,message processing will stop.
Thanx
Aamir

Using digital editions 2.0, I cannot transfer books downloaded to digital editions from library to my nook. Error message: failed to write destination file.

Using digital editions 2.0, I cannot transfer books downloaded to digital editions from the library to my nook. I get an error message: failed to write destination file. At first, this happened once in a while but now every time. Help!!!

Modern kobo books should just use regular Adobe DRM and be readable on compatible ereaders that are authorized to the correct Adobe ID.
I understand older kobo book had different DRM: but I wouldn't expect those to
When Adobe DRM book information say 'no copying', that generally means no copying outside those Adobe DRM limitations.
You should be able to copy within the restrictions. You can double-check that with the sellers (Kobo).
Just double-checking
the pocket book is Adobe DRM compatible?
that you have authorized your pocket book with your current Adobe ID?
menu/Help/Authorize Device when plugged into ADE: Library/Authorize Device if using the older more reliable ADE 1.7.2
If the pocket book is already authorized but to a different ID, you will need to deauthorize it first, ctrl-shift-E to ADE with device plugged in (or cmd-shift-E on Mac).
Be aware that will lose the ability to read DRM books authorized with the previous ID.

Ebook error message: "Fail to write destination file error"

I am attempting to transfer ebooks (checked out via my library's ebook consortium) from Adobe Digital Editions to my Nook. I have done this in the past with no issues, but recently I have been getting the following error message: "Fail to write destination file error".
I know the issue is NOT lack of space on my Nook (I cleared it of all info and still received the error message).

I had this problem as well, and after doing some research via google (because I found NOTHING helpful in adobe forums), I found the problem....my Nook was full. I had no idea this was even possible! But, I borrow a lot of library books, and didn't realize that after they expire, they are still taking up space on my Nook. Here's how to check: plug your Nook into your computer, go to file manager (right-click the start button in Windows), find the Nook drive and right click, choose properties. This should show you a pie chart of used/free space on your Nook. If this is the case, you need to remove some files from your Nook. For me, I had to find the Digital Editions file and delete all the thumbnails and actual files for the library books. If it's booked you've purchased, perhaps you need to archive some books. Hope this helps!

We've been downloading books to our nook for years but recently keep getting error message "failed to write destination file" - why?

what is "failed to write destination file"?

I had this problem as well, and after doing some research via google (because I found NOTHING helpful in adobe forums), I found the problem....my Nook was full. I had no idea this was even possible! But, I borrow a lot of library books, and didn't realize that after they expire, they are still taking up space on my Nook. Here's how to check: plug your Nook into your computer, go to file manager (right-click the start button in Windows), find the Nook drive and right click, choose properties. This should show you a pie chart of used/free space on your Nook. If this is the case, you need to remove some files from your Nook. For me, I had to find the Digital Editions file and delete all the thumbnails and actual files for the library books. If it's booked you've purchased, perhaps you need to archive some books. Hope this helps!

Blu-ray Error: "device error", Code "3", Note: "CreateStcSequence: Fail to write M25 File.

I keep getting this error message about 11gb into burning a 22gb Blu-ray. "Blu-ray Error: "device error", Code "3", Note: "CreateStcSequence: Fail to write M25 File." I have tried just about everything from running as administrator, starting a new project and changing the disc too. I am using CS6 and going crazy... any ideas?

Hi,
First try to create Bly Ray Image Under option 'Output" Select BluRay Image, and also select the destination to create Image and click on Build, It will create a BluRay Image with extension of .iso. Now to burn BluRay Disc, you need to Select BluRay Disc under 'Output' Option and Below under 'Source' Option select BluRay Image instead of current project and Select the destination where you have put .iso Image, Then click on Build and it will burn BluRay disc.
In simple , First create an Image then Burn that image to BluRay .
I hope, it will help you.
Thanks

Need Help-SOA 11g File Adapter unable to delete input file and its crashing

Hi All
Please find the details below:
1. We have created a simple SOA composite to Read file from an input directory, archive the file in an archive directory using Inbound File Adapter Read
and then use Outbound File Adapter Write to move the file to a output directory.
2. File Adapter needs to delete the file after successful read/retrieval.
3. We are using the "Use Trigger File" for invoking the file adapter. This is a new feature in SOA 11g
4. Also we are using the option of reading the file as an attachment as we are not doing any transformation in the composite
Issue Details_
1. When the trigger file is put in the input directory for the first time, the File Adapter reads the file, archives it and moves it to the output directory
2. However it does not delete the input file from the input directory and raises Fatal Exception mentioned below:
[*2011-01-12T16:55:48.639+05:30] [soa_server1] [WARNING] [] [oracle.soa.adapter] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@19c243d]*
[userId: <anonymous>] [ecid: 0000IptyLrL9_aY5TrL6ic1DBOS_000009,0] [APP: soa-infra] File Adapter FileAdapterTriggerFilePOC PostProcessor::
Delete failed, the operation will be retried for max of [0] times
[2011-01-12T16:55:48.639+05:30] [soa_server1] [WARNING] [] [oracle.soa.adapter] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@19c243d]
[userId: <anonymous>] [ecid: 0000IptyLrL9_aY5TrL6ic1DBOS_000009,0] [APP: soa-infra] File Adapter FileAdapterTriggerFilePOC [[
BINDING.JCA-11042
File deletion failed.
File deletion failed.
File : C:\Dibya\AttachmentTest\InputDir\TestFile3.txt could not be deleted.
Delete the file and restart server. Contact oracle support if error is not fixable.
If any one has faced similar issues, kindly provide pointers on how to resolve it.
Regards,
Dibya

Hi,
Using the file adapter, you can poll from multilple locations...
Keep the following property in your .jca file
<property name="DirectorySeparator" value="," />
While giving the path in File Adapter configuration, keep comma and give the next location....then the file will be picked up from the locations you gave....
Hope this helps...
Thanks,
N

Error in reciever file adapter , where i am getting file name dynamically

hi all,
error in reciever file adapter , where i am getting file name dynamically, please help me in this isssue , i am trying for a long time
MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'Conversion configuration error: Unknown structure 'ns0:MT_eINVOICE_RECV' found in document', probably configuration error in file adapter (XML parser error)': java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'Conversion configuration error: Unknown structure 'ns0:MT_eINVOICE_RECV' found in document', probably configuration error in file adapter (XML parser error)'

i am getting new error
MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: Channel has not been correctly initialized and cannot process messages
this is my strcuture
and i have changed my structure
<HEADER>
<ADDRESS1/>
<ADDRESS2/>
<ADDRESS3/>
<ADDRESS4/>
</HEADER>
<HEADER_GST>
<TAX1/>
<TAX2/>
<TAX3/>
</HEADER_GST>
<LINE>
<QTY/>
<UOM/>
<UNIT_AMT/>
<CHARGE_TO_DT/>
</LINE>
<FILENAME>
<FILENAME/>
</FILENAME>
i have given the recordset structure as
HEADER,HEADER_GST,LINE,FILE

Sener file adapter has read/pick the files first in first out method.

HI
In my Interface I am Using Sender as File adapter. As per my requirement Sender file adapter has to read the file from file directory. This directory having 1000u2019s of files with some files are same name (time stamp is different) and some files are different name here file adapter has to pick the file with mentioned name in File sender adapter like ZMPSMSGSTATUSMST-.xml .
But source file name is like <TABLENAME>-<TIME_STAMP>.XML (ZMPSWRKFLOWHIST-20090527-150522-628) in file directory.
The file adapter in XI will poll to this directory and picks the file in first- in first-out by sorting according to timestamp.
To do this configuration what I have to do in sender file adapter please give me your valuable inputs.

HI Abhi,
Thank you for your spot replay.
I tested now but i am geting below error.
Putting message into send queue failed, due to: com.sap.aii.af.ra.ms.api.DuplicateMessageException: Message ID f4ca4f86-9c5d-4bdd-1fb1-a6bd7cda99a8(OUTBOUND) already exists in database: com.sap.sql.DuplicateKeyException: [NWMss][SQLServer JDBC Driver][SQLServer]Violation of PRIMARY KEY constraint 'PK__XI_AF_MSG__491A1D0B'. Cannot insert duplicate key in object 'dbo.XI_AF_MSG'..
Could not archive file 'E:\file\in\ZMPSMSGSTATUSMST-20090527-150522-628.xml' after processing
but i am able to see this file in Archive foleder. once file is archivied sucessfully the same file is delted from source directory?
I given processing parametes queue name is TEST.
Thanks
srinivas
Edited by: srinivasreddy p on May 28, 2009 8:43 AM
Edited by: srinivasreddy p on May 28, 2009 8:52 AM

File adapter should pick a single file at a time

Hi,
I have File to RFC scenario.. in my source directory I'm getting bunch of files with the same name. at a time.. but i want to pick the one by one only. that means.. my file adapater poll interval is 30 seconds.. every 30 seconds it will pick the one file.. even though there are multiple files.. but my file adapter should pick a single file ata time..
but at present my file adapater was picking all the files ata time.. but i want to make my file adapter should pick single file ata time..
for this.. any special configuration we need to do.. or any ideas or suggestion .. will be.. appriciated..
regards
Babu

>>any special configuration we need to do..
there is no default configuration to achieve this functionality.
I speculate that any of this should work.
1. Post the files to a intermediate directory and use a SCRIPT/Batch program to move only one file at a time frame to the source directory.
2. Uncheck the option Process Read only files in the sender CC to prevent the file adapter to pick the read only files. Use a script that changes the permission of one file at a time so that the file adapter will pick that file alone.
In both the cases the script needs to be scheduled at the OS level to run every 30 seconds.
Thanks
SaNv....

File Adapter and reading all XML files from direcotry

Problem occurs on PI 7.1
I defined sender file adapter. File name mask is: "*.xml" to read all XML messages from directory.
Quality of service is: Exactly One.
Poll Interval: 30
Retry interval: 30
Processing mode: Archive with option "Add Timestamp".
Processing sequence: by name.
I though that with above configuration my File Adapter will be reading folder for all coming XML files. But somehow it is reading XMLs only when I'm activating it in Integration Builder.
Any idea what can cause such strange problem?

Hi Tomasz,
As per my understanding, you need to activate the file adapter for reading the XML files on your directory. Right?
If that is the case, then the issue might be with the Cache.
1. Clear the cache from the Integration Builder.
2. Check in SXI_CACHE whether there are any issues. Click on Delta Cache refresh to find out if there are any cache related issues.
Thanks,

Sender file adapter is not polling the file.

Dear all,
Sender file adapter is not polling the file.(But Receiver file adapter is getting the file)
we have installed SP15.
It was worked fine for previous SP14.
I have cheked in Adapter monioring also.
Can you help me out of this problem
Regards
Dhanabal

Hi Dhanabal,
Is the XI system running on a unix machine ?
If yes, from the OS level for the folder you are using in the file comm. channel, execute the command
<b>chmod 777 <folder_name></b>
The reason for the file to show up in receiver side and not get deleted might be that the xi user mighht be having only read access to the folder...
Thanks,
Renjith.

Error when Share to File "The share operation 'File' has failed. Cannot create file."

Upgraded to Mavericks and the new iMovie. Imported a video from iPhone 5 to edit, and then tried to Share File.
Error every time, it says that "The share operation 'File' has failed. Cannot create file." It does not give any error number that would help figuring out the problem.
Late 2011 MacBookPro with 8 GB and over 150 GB free on HD.
Imported several other videos from various sources, and always the same result when trying to Share to File.
Any ideas?
Thanks.

I'm having the same problem with a 2012 Macbook Pro 15" Retina; iMovie version 10.0.3. I'm not sure why either. It was working fine until one day it quit exporting to file at all.

File Adapter failed to write a file

Similar Messages

Maybe you are looking for