File Adapter - FTP - Unable to Create new pooled resource

Hi Friends,
I am getting the following error while using file adapter with FTP protocol...
Attempt to process file failed with Error when getting an FTP connection from connection pool: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: FTPEx: PASS command failed
Error MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: Error when getting an FTP connection from connection pool: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: FTPEx: PASS command failed
Error Exception caught by adapter framework: Error when getting an FTP connection from connection pool: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: FTPEx: PASS command failed
Error Delivery of the message to the application using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Error when getting an FTP connection from connection pool: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: FTPEx: PASS command failed.
Can someone help me to solve this probelm..
Regards,
Shyam.

Hi,
Try to check the directory you have specified in the CC and also check whether you are able to connect to the FTP server with those login credential and access the directory specified.
Also let me know whether it is working fine for other scenario's or not.
Regards,
Nithiyanandam

Similar Messages

FTP error-Unable to create new pooled resource: com.sap.aii.adapter.file.ft

Hi,
We have a scenario where XI receives a Idoc and based on the contents of Idoc, It will generate 5 different files and send it to the external FTP server.We configured 5 receiver channels for these 5 files.
When this interface runs, most of the files will be delivered but some of the messages will be errored out.
The receiver channel has shown the following error-
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Error when getting an FTP connection from connection pool: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: com.sap.aii.adapter.file.ftp.FTPEx
I tried to resend them by temperorily stopping other channels to reduce connections to this FTP server.But these messages again resulted with same error.
Can someone suggest what might be the cause for this error.
Thanks in advance.

Hi ,
As I am not sure about the problem so U just try all of the option I am writing below. It may help u as these are the probable solutions for this problem.
1.perform Full CPA cache refresh using PIDIRUSER
2.The problem seems to be in establishing the connection with the File server . This could be due to
a. Wrong user name or password in receiver adapter .
b. Firewall connection are not open
actually you are saying that some files are being delivered so all the file has to be deliverd on same server on diffrent directory or all files are going on diffrent server at present I am assuming that all files are going on diffrent server so please check UID & PWD properly.if they are on same server but diff. directory it can be easily done using one Communication channel only.
3. Finally please check the errorneous communication channel .
to check your communication channels are working fine or not you can check in channel monitoring in PI7.0, adapter monitoring in Xi3.0.
if you are on PI7.0, goto RWBCache monitoring select AE and cilck disply-select the date todays--check everything is greent here
4.Please check your maximal connection pool .
Regards,
Saurabh

File Adapter FTP SSL SSL Certificate Exception

After reviewing the results of searching on this error, I do not find anything that fits my situation:
SAP File Adapter (PI 7.1) using FTP with FTPS connection security.
I am not using X.509 certificate for client authentication.
My connection is using a non-public certificate.
I have added the SSL certificate to TrustedCAs and DEFAULT keystores.
I am getting the following error:
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error when getting an FTP connection from connection pool: com.sap.aii.af.lib.util.concurrent.ResourcePoolException: Unable to create new pooled resource: iaik.security.ssl.SSLCertificateException: Peer certificate rejected by ChainVerifier
Since I am using an non-public certificate, it will not validate. Even adding to the TrustedCAs and DEFAULT keystore it seems the configuration is still attempting to validate the certificate.
Any recommendations?

Hi,
The main reasons for this error are:
1. The correct server certificate could not be present in the TrustedCA
keystore view of NWA. Please ensure you have done all the steps
described in these two URLs:
Security Configuration at Message Level
http://help.sap.com/saphelp_nwpi71/helpdata/EN/ea/c91141e109ef6fe1000000
0a1550b0/frameset.htm
2. The server certificate chain contains expired certificate. Check for
it (that was the cause for other customers as well) and if it's the case
renew it or extend the validation.
3. Some other people have reported similar problem and mainly the
problem was that the certificate chain was not in correct
order. Basically the server certificate chain should be in order
Own->Intermedite->Root. To explain in detail, if your server certificate
is A which is issued by an intermediate CA B and then B's certificate is
issued by the C which is the root CA (having a self signed certificate).
Then your certificate chain contains 3 elements A->B->C. So you need to
have the right order of certificate in the chain. If the order is B
first followed by A followed by C, then the IAIK library used by PI
cannot verify the server as trusted. Please generate the certificate in
the right order and then import this certificate in the TrustedCA
keystore view and try again. Please take this third steps as the
principal one.
Hope it solves your querie.
Regards,
Caio Cagnani

Warning: Unable to create new entry, caught: "javax.ejb.CreateException", message is:

Warning: Unable to create new entry, caught: "javax.ejb.CreateException", message is: "Error creating EntityBean: Io exception: The Network Adapter could not establish the connection".
while executing JSP:<%
* add.jsp
* Adds a new entry through EmployeeBean. This is a JSP that serves 2
* functions. First of all, when called with no arguments, it will display a
* table with a few input fields. The user should enter empNo, empName and
* salary of the new record to be added. When she submits this
* information, it is sent to this page again. If it is successful, then the
* user can continue adding new entries. If it is not, then the old data will
* be displayed, and a warning message will be shown to her.
%>
<%@ page import="com.webstore.*,java.io.*,java.util.*,javax.naming.*" %>
<%
// Make sure this page will not be cached by the browser
response.addHeader("Pragma", "no-cache");
response.addHeader("Cache-Control", "no-store");
// We will send error messages to System.err, for verbosity. In a real
// application you will probably not want this.
PrintStream errorStream = System.err;
// If we find any fatal error, we will store it in this variable.
String error = null;
// In a moment we will check if all columns were passed to this page
String param_1 = "";
String param_2 = "";
String param_3 = "";
long dptNo = 0;
String dptName = null;
// This variable indicates what function of this page is currently used. If
// this page is called with parameters, then a new entry should be
// added. In that case this variable is true.
boolean submitting = false;
// We will first attempt to get the reference to EmployeeHome from the
// session. The "list.jsp" page sets this attribute in the session.
DepartmentHome home = (DepartmentHome) session.getAttribute("DepartmentHome");
if (home == null) {
error = "No previous connection to DepartmentBean.";
} else {
// Attempt to get all 3 parameters from the session
param_1 = request.getParameter("DPTNO");
param_2 = request.getParameter("DPTNAME");
// If all 3 parameters are specified, then this is probably a submission by
// this very page. Note that if the user left one of the fields blank, then
// the corresponding parameter will be "", not null.
if (param_1 != null && param_2 != null) {
param_1 = param_1.trim();
param_2 = param_2.trim();
submitting = true;
// In the following variable we will store a (non-fatal) warning message. This
// message will be displayed in the page, but so will the submission form.
String warning = null;
if (submitting) {
warning = "";
// If there is an empty param_1, param_2 and/or param_3, then this will be noted
// in the warning message.
if ("".equals(param_1)) {
warning = "Null param_1 specified. ";
if ("".equals(param_2)) {
warning += "Null param_2 specified. ";
// If we don't have a warning message yet, then we will attempt to create
// a new record.
if ("".equals(warning)) {
try {
dptNo = (long)Long.parseLong(param_1);
dptName = new String(param_2);
Department rec = (Department) home.create(dptNo);
rec.setDptname(dptName);
// empty columns after insert for effect
param_1 = "";
param_2 = "";
// If we got this far, then there was no problem detected.
warning = null;
} catch (Exception e) {
// Set the warning variable to indicate a problem.
warning = "Unable to create new entry, caught: \"" +
e.getClass().getName() + "\", message is: \"" +
e.getMessage() + "\".";
// Decide what the title will be.
String title;
if (error != null) {
title = "Error";
} else {
title = "com.webstore | Add entry";
%>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN" "http://www.w3.org/TR/REC-html40/loose.dtd">
<HTML>
<HEAD>
<TITLE><%= title %></TITLE>
</HEAD>
<BODY bgcolor="#FFFFFF">
<H1><%= title %></H1>
<%
// If there was a fatal error, then display the error message
if (error != null) {
%>
<P><BLOCKQUOTE><%= error %></BLOCKQUOTE>
<%
// Otherwise display a table with fields to be filled in.
} else {
// If there was a warning, then display it.
if (warning != null) {
%>
<TABLE border="1" bgcolor="#FF2222">
<TR><TD><FONT color="#FFFFFF"><STRONG>Warning: <%= warning %></STRONG></FONT></TD></TR>
</TABLE>
<%
} /* if */
// Display the table with fields. There are two columns. The left column
// contains the names of the fields, while the right column contains the
// fields.
%>
<FORM action="dptadd.jsp" method="GET">
<P><TABLE border="1">
<TR>
<TD><STRONG>DptNo:</STRONG></TD>
<TD><INPUT type="text" name="DPTNO" value="<%= param_1 %>"></INPUT></TD>
</TR>
<TR>
<TD><STRONG>DptName:</STRONG></TD>
<TD><INPUT type="text" name="DPTNAME" value="<%= param_2 %>"></INPUT></TD>
</TR>
<TR>
<TD colspan="3" align="center"><INPUT type="submit" value="Add this entry"></INPUT></TD>
</TR>
</TABLE>
</FORM>
<%
} /* else */
%>
<P><TABLE border="1">
<TR><TD>Back to list</TD></TR>
</TABLE>
</BODY>
</HTML>
Please guide me..

Rajive,
This is the same problem as in your other post:
sql is running very slow
So please refer to my answer there.
Good Luck,
Avi.

Runtime error and unable to create new web application

Hi
when i create new web application i faced this error Runtime error and unable to create new web application.
in this farm we have
2 wfe servers
2 application servers.
adil

Adil,
There could be many reason like IIS issue, Space issue, Permission issue, SQL issue which is not possible us to guess rather
you need to jump in the SharePoint log(Program Files\Common files\Microsoft Shared\Web Server Extensions\14\LOGS) and find out the specific error log its throwing after which trouble shoot can be start.
You can refer few similar threads here -
Link
Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

Adapter Framework unable to create outbound JCA connection

Hi All,
I have a requirement in which I have to send a request from Siebel to SAP & get a response from it.
I have deployed my process on Oracle AS BPEL console.
When I try to initiate my deployed process I get below mentioned error.
<summary>
http://127.0.0.1:8888/orainfra/wsil/adapters/applications/GetDetail_invoke.wsdl?wsdl [ GetDetailPortType::GetDetail(input_GetDetail,output_GetDetail) ] - WSIF JCA Execute of operation 'GetDetail' failed due to: Adapter Framework unable to create outbound JCA connection.
http://127.0.0.1:8888/orainfra/wsil/adapters/applications/GetDetail_invoke.wsdl?wsdl [ GetDetailPortType::GetDetail(input_GetDetail,output_GetDetail) ] - : The Adapter Framework was unable to establish an outbound JCA connection due to the following issue: javax.resource.spi.EISSystemException: IWAFManagedConnectionFactory:Exception javax.resource.ResourceException: Problem activating adapter. (JCO.classInitialize(): Could not load middleware layer 'com.sap.mw.jco.rfc.MiddlewareRFC'
JCO.nativeInit(): Could not initialize dynamic link library sapjcorfc [no sapjcorfc in java.library.path]. java.library.path [D:\product\10.1.3.1\OracleAS_1\jdk\bin;.;C:\WINDOWS\system32;C:\WINDOWS;D:\product\10.1.3.1\OracleAS_1\opmn\bin;D:\product\10.1.3.1\OracleAS_1\opmn\lib;D:\product\10.1.3.1\OracleAS_1\bin;C:\WINDOWS;C:\WINDOWS\system32]). Check logs for more information
; nested exception is:
ORABPEL-12511
Adapter Framework unable to create outbound JCA connection.
http://127.0.0.1:8888/orainfra/wsil/adapters/applications/GetDetail_invoke.wsdl?wsdl [ GetDetailPortType::GetDetail(input_GetDetail,output_GetDetail) ] - : The Adapter Framework was unable to establish an outbound JCA connection due to the following issue: javax.resource.spi.EISSystemException: IWAFManagedConnectionFactory:Exception javax.resource.ResourceException: Problem activating adapter. (JCO.classInitialize(): Could not load middleware layer 'com.sap.mw.jco.rfc.MiddlewareRFC'
JCO.nativeInit(): Could not initialize dynamic link library sapjcorfc [no sapjcorfc in java.library.path]. java.library.path [D:\product\10.1.3.1\OracleAS_1\jdk\bin;.;C:\WINDOWS\system32;C:\WINDOWS;D:\product\10.1.3.1\OracleAS_1\opmn\bin;D:\product\10.1.3.1\OracleAS_1\opmn\lib;D:\product\10.1.3.1\OracleAS_1\bin;C:\WINDOWS;C:\WINDOWS\system32]). Check logs for more information
Please examine the log file for any reasons. Enable DEBUG logging in the BPEL Console.
</summary>
I have installed Oracle Adapter 10.1.3.1 on Oracle SOA Suite 10.1.3.1 & then upgraded my SOA Suite to 10.1.3.3.
Its a very critical issue.
Please help me out of it.
Thanks & Regards,
Shanty

I have resolved this error.
If you are facing the same error then follow the following steps:
1. Shutdown the Oracle SOA Suite.
2. Copy sapjcorfc.dll into C:\WINDOWS\system32
3.Edit oc4j-ra.xml located at below locations
a. OracleHome\j2ee\home\application-deployments\default\jca-app-adapter
b. OracleHome\j2ee\home\connectors\jca-app-adapter\jca-app-adapter\META-INF
by editing the values
<config-property name="AdapterName" value="SAP"/>
<config-property name="Config" value="SAP_Target_You_Have_Created_in_iaexplorer"/>
Cheers,
Shanty

Java.lang.OutOfMemoryError: unable to create new native thread

Hi All,
I have installed weblogic server 8 sp4 in production environment . I am facing problems with JVM issues .
JVM is crashing very frequently with the following errro :
####<Jun 18, 2009 10:58:22 AM IST> <Info> <Common> <IMM90K-21> <SalesCom> <ExecuteThread: '24' for queue: 'weblogic.kernel.Default'> <<anonymous>> <> <BEA-000628> <Created "1" resources for pool "PIConnectionPool", out of which "1" are available and "0" are unavailable.>
####<Jun 18, 2009 11:00:09 AM IST> <Info> <EJB> <IMM90K-21> <SalesCom> <ExecuteThread: '23' for queue: 'weblogic.kernel.Default'> <<anonymous>> <> <BEA-010051> <EJB Exception occurred during invocation from home: payoutCheck.ejb.payoutCheck_s6v3so_HomeImpl@121a735 threw exception: java.lang.OutOfMemoryError: unable to create new native thread
java.lang.OutOfMemoryError: unable to create new native thread
     at java.lang.Thread.start(Native Method)
     at payoutCheck.classes.MyThread2.MyThreadv(PayoutCheckBOImpl.java:249)
     at payoutCheck.classes.PayoutCheckBOImpl.genSP(PayoutCheckBOImpl.java:184)
     at payoutCheck.ejb.PayoutCheckSLSB.genSP(PayoutCheckSLSB.java:191)
     at payoutCheck.ejb.payoutCheck_s6v3so_EOImpl.genSP(payoutCheck_s6v3so_EOImpl.java:315)
     at payoutCheck.ejb.payoutCheck_s6v3so_EOImpl_CBV.genSP(Unknown Source)
     at payoutCheck.deligate.PayoutCheckBD.genSP(PayoutCheckBD.java:226)
     at ui.action.SearchAction.callFilter(SearchAction.java:378)
     at sun.reflect.GeneratedMethodAccessor201.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchAction.java:280)
     at org.apache.struts.actions.DispatchAction.execute(DispatchAction.java:220)
     at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:446)
     at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:266)
     at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1292)
     at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:510)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1006)
     at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:419)
     at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:315)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6718)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3764)
     at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2644)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:219)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:178)
>
The above mentioned is coming several times , anybody please help out to get rid of this issue.
Thanks in advance ,
Krikar.

This only tells you that the JVM is running out of heap space. It doesn't tell you what is causing the problem. You likely have a memory leak, but you could also try increasing the max heap size of the JVM (-Xmx command line option). It would help to watch the % mem in use statistic, but only immediately after a garbage collection cycle (you can force a GC from the admin console). If the % mem in use after the GC is increasing over time, then that likely confirms you have a memory leak. Note that looking at that statistic during the server startup probably is irrelevant. You'd need to wait until the server finishes starting up, and likely processed a few messages (to load static data).
If you get to the point of confirming that you have a memory leak, that requires doing detailed analysis with a Java profiler (JProfiler, JProbe, YourKit, etc.) to track down the source of the leak.

Help! Unable to create new native thread

Ok I see this problem all over the web but most of the posts are many years old and still leave me a little confused. Often at random times on the same tags like CFLDAP I get the error "Unable to create new native thread". Then a few minutes later the same tag on the same page works just fine.
I have 4GB of memory in this box with 1400 MB set as the maximum Java heap size by the way.
Here are my arguments from the jvm.config file.
# Arguments to VM
java.args=-server -Xmx1400m -Dsun.io.useCanonCaches=false -XX:MaxPermSize=192m -XX:+UseParallelGC -Dcoldfusion.rootDir={application.home}/../ -Dcoldfusion.libPath={application.home}/../lib -Dcoldfusion.classPath={application.home}/../lib/updates,{application.home}/../lib,{appli cation.home}/../gateway/lib/,{application.home}/../wwwroot/WEB-INF/flex/jars,{application. home}/../wwwroot/WEB-INF/cfform/jars,"C:\\Program Files\\Apache Software Foundation\\Apache2.2\\htdocs\\InterWeb-Prod\\includes\\classes"
Here is a typical error that comes through.
struct
Browser     Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/533.4 (KHTML, like Gecko) Chrome/5.0.375.70 Safari/533.4
DateTime    {ts '2010-06-23 10:07:44'}
Diagnostics unable to create new native thread null <br>The error occurred on line 122.
GeneratedContent
HTTPReferer http://--------------------/index.cfm?FuseAction=HR.main
Mailto      interweb@---------------------
Message     unable to create new native thread
QueryString fuseaction=ManagedLists.MailSubscriptions
RemoteAddress     192.168.250.124
RootCause   struct
Message     unable to create new native thread
StackTrace          java.lang.OutOfMemoryError: unable to create new native thread at java.lang.Thread.start0(Native Method) at java.lang.Thread.start(Thread.java:597) at com.sun.jndi.ldap.Connection.<init>(Connection.java:208) at com.sun.jndi.ldap.LdapClient.<init>(LdapClient.java:112) at com.sun.jndi.ldap.LdapCtx.connect(LdapCtx.java:2504) at com.sun.jndi.ldap.LdapCtx.<init>(LdapCtx.java:263) at com.sun.jndi.ldap.LdapCtxFactory.getInitialContext(LdapCtxFactory.java:76) at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667) at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288) at javax.naming.InitialContext.init(InitialContext.java:223) at javax.naming.InitialContext.<init>(InitialContext.java:197) at javax.naming.directory.InitialDirContext.<init>(InitialDirContext.java:82) at coldfusion.tagext.net.LdapTag.do_ActionQuery(LdapTag.java:839) at coldfusion.tagext.net.LdapTag.doStartTag(LdapTag.java:616) at coldfusion.runtime.CfJspPage._emptyTcfTag(CfJspPage.java:2661) at cfadfunctions2ecfm1473603830$funcADLOOKUPUSERNAME.runFunction(C:\Program Files\Apache Software Foundation\Apache2.2\htdocs\InterWeb-Prod\includes\adfunctions.cfm:122) at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:418) at coldfusion.runtime.UDFMethod$ArgumentCollectionFilter.invoke(UDFMethod.java:324) at coldfusion.filter.FunctionAccessFilter.invoke(FunctionAccessFilter.java:59) at coldfusion.runtime.UDFMethod.runFilterChain(UDFMethod.java:277) at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:192) at coldfusion.runtime.CfJspPage._invokeUDF(CfJspPage.java:2471) at cfadfunctions2ecfm1473603830$funcADLOOKUPMULTIPLEUSERNAMES.runFunction(C:\Program Files\Apache Software Foundation\Apache2.2\htdocs\InterWeb-Prod\includes\adfunctions.cfm:54) at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:418) at coldfusion.runtime.UDFMethod$ArgumentCollectionFilter.invoke(UDFMethod.java:324) at coldfusion.filter.FunctionAccessFilter.invoke(FunctionAccessFilter.java:59) at coldfusion.runtime.UDFMethod.runFilterChain(UDFMethod.java:277) at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:192) at coldfusion.runtime.CfJspPage._invokeUDF(CfJspPage.java:2471) at cfdsp_managedlists2ecfm55598920.runPage(C:\Program Files\Apache Software Foundation\Apache2.2\htdocs\InterWeb-Prod\hr\managedlists\dsp_managedlists.cfm:232) at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:196) at coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:370) at coldfusion.runtime.CfJspPage._emptyTcfTag(CfJspPage.java:2661) at cffbx_switch2ecfm2121232114.runPage(C:\Program Files\Apache Software Foundation\Apache2.2\htdocs\InterWeb-Prod\hr\managedlists\fbx_switch.cfm:23) at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:196) at coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:370) at coldfusion.runtime.CfJspPage._emptyTcfTag(CfJspPage.java:2661) at cffbx_fusebox30_cf502ecfm1180471387._factor4(C:\Program Files\Apache Software Foundation\Apache2.2\htdocs\InterWeb-Prod\fbx_fusebox30_cf50.cfm:241) at cffbx_fusebox30_cf502ecfm1180471387._factor5(C:\Program Files\Apache Software Foundation\Apache2.2\htdocs\InterWeb-Prod\fbx_fusebox30_cf50.cfm:1) at cffbx_fusebox30_cf502ecfm1180471387.runPage(C:\Program Files\Apache Software Foundation\Apache2.2\htdocs\InterWeb-Prod\fbx_fusebox30_cf50.cfm:1) at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:196) at coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:370) at coldfusion.runtime.CfJspPage._emptyTcfTag(CfJspPage.java:2661) at cfindex2ecfm749274359.runPage(C:\Program Files\Apache Software Foundation\Apache2.2\htdocs\InterWeb-Prod\index.cfm:23) at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:196) at coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:370) at coldfusion.filter.CfincludeFilter.invoke(CfincludeFilter.java:65) at coldfusion.filter.ApplicationFilter.invoke(ApplicationFilter.java:273) at coldfusion.filter.RequestMonitorFilter.invoke(RequestMonitorFilter.java:48) at coldfusion.filter.MonitoringFilter.invoke(MonitoringFilter.java:40) at coldfusion.filter.PathFilter.invoke(PathFilter.java:86) at coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:70) at coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:2 8) at coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38) at coldfusion.filter.NoCacheFilter.invoke(NoCacheFilter.java:46) at coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38) at coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22) at coldfusion.CfmServlet.service(CfmServlet.java:175) at coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:89) at jrun.servlet.FilterChain.doFilter(FilterChain.java:86) at coldfusion.monitor.event.MonitoringServletFilter.doFilter(MonitoringServletFilter.java:42 ) at coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46) at jrun.servlet.FilterChain.doFilter(FilterChain.java:94) at jrun.servlet.FilterChain.service(FilterChain.java:101) at jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:106) at jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42) at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:286) at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543) at jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:203) at jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:320) at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428) at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:266) at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
I could really use some help figuring this out. We are getting random errors a few times a day and usually in places where we are using CFLDAP.
Thanks,
David

Absolutely unbelievable that this has been going on for 4 YEARS and there are still NO definitive answers from Adobe!!
There's no definite answer from Adobe, because there's no definitive single question. These errors come up because - for any number of possible reasons - the JVM becomes overloaded. And it's almost always down to an issue with the application code being run, and nothing to do with CF, per-se. So what's Adobe supposed to do? Come and fix your application for you? There are plenty of diagnostic tools out there - some built into CF itself - which you could use to sort the problem out. Or you could hire someone like Mike Brunt to come and have a look at your set up. All it takes to fix these things is to actually do something about fixing it, rather than slamming one's fist on the desk saying "why doesn't Adobe do something!"
I thought - and my knowledge in the area isn't expansive - the inability to allocate threads was down to the app being choked up: threads are a finite commodity, and if requests are queuing up faster than the JVM can clear them, you're gonna get errors eventually. What causes this sort of thing? More traffic than the server can process. This could be because of server kit, or it could be due to code that doesn't scale to the requirement. Usually the latter. Basically one cannot polish a turd.
I have a 24x7 production server that services 180,000 clients in 300 countries around the clock that cannot afford to be down for more than a few minutes at a time.
I'm running Windows 2008 32-bit with 4GB of RAM because I have some graphics software that cannot tolerate a 64-bit OS. Everything has been running fine for the past few months, but now it's starting to crash more and more frequently. I have CF 8.0.1.195765 and Java 1.6.0_04
How many concurrent requests for 180000 clients generate? The number of clients matters less than how heavily the site is used. But, to be honest, I get the impression the implication is "it's a busy site", in which case I think your hardware is a bit on the lean side. Also, if it's a mission-critical app, running it on a single server is probably ill-advised, just from a fault-tolerance perspective even before one starts thinking about performance.
If I was in your situation, I'd consider the following options:
* upgrade your JVM to the most recent version (1.6.0_21?)
* put more RAM in the box, and run a second CF instance on it.
* get another box.
* refactor the environment so the graphics software runs on a different box, upgrading the CF server to 64-bit (again, with more RAM)
* run some diagnostics on the server, seeing what's taking up threads and where any bottlenecks might be
* get an expert in to do the analysis side of things.
* stop expecting Adode to fix "something".
One of my other symptoms I have noticed is that any work done using RDP starts getting really really bogged down. Opening Windows Explorer and searching for files can take minutes. Restarting the CF service will sometimes fail to complete, and you have to wait a few minutes before the manual Start option appears in the dropdown. Maybe coincidentally, the Performance Monitor will fail to add any of the ColdFusion metrics, for example Running Requests and Queued Requests, and the Event Monitor shows an error relating to an 8-byte boundary not being maintained.
You don't, by any chance, store your client variables in the registry do you? The only time I've seen this happen is when the CF box is munging the OS environment, and the only way I can think this could happen if it was clogging the registry. Never store client variables in the registry.
Adam

HT1449 new folder greyed out, unable to create new folder, anybody know why

trying to transfer Itunes to a new External drive, unable to create new folder on new drive as detailed in Apple instructions, anybody know why.

Unless you have a utility that will let you R/W NTFS they as noted - reformat to a +HFS file system - aka -
Mac OS Extended (Journaled) - using Disk Utility.
The Mac OS can read/write +HFS and FAT 32 but can only read NTFS.
MJ

Using wildcards (*) in sender file adapter - FTP type

Hi guys!
Dooes it work using wildcards in sender file adapter (FTP type(!) (filesystem obviously work))? I tried it and it failed. it works only for exact name..
I read some articles about FTP and the result is, that ftp work always only with 1 file, so I'm wondering, if this is possible.
Thanks for info!
Olian

Thanks for all replies..
I know of course, that * can be used, I use it in many scenarios too. But on a FileSystem. It is not working if the sender type is FTP.
*, ., *.dat, ... nothing like that works.. Just exact file name.
I am able to pick up file, if I specify it's exact name, so there should be no problem with permissions..
Please, I'd appreciate one reply with comfirmation: yes, we are using asterisk (*) , we access source files via FTP and they are processed.
Is there anybody with this experience, that it works?
Thank you!
Olian

Unable to create new events in iCal

I updated my iPhone 4 to iOS7, and now when I try to create a new event in iCal, nothing happens. I am able to tap the "+" and enter the event information, but when I tap "Done", no new event appears in the calendar.
If I, instead, create the event in the Calendar on my PC, the phone syncs with Outlook, and the event appears on the phone's iCal app.
Why am I suddenly unable to create new events on my phone in iOS7, and how can I fix this issue?

Thanks! I've noticed the phone has been a bit "clunky" since the update too. Did you experience the same thing & did the hard restart help?

Unable to create new windows live id......the mess...

i m unable to create new windows live id.
the message have been shown that"your phone have too many windows live id,cant create new one..contact your senrvice provider"
i stolen my nokia music id password...so what can i do???????????????????

mallar wrote:
i m unable to create new windows live id.
the message have been shown that"your phone have too many windows live id,cant create new one..contact your senrvice provider"
i stolen my nokia music id password...so what can i do???????????????????
why would you steal your music id password? ..nokia id / account is different from windows live id btw.
maybe you already have a windows live account, thats why its showing the that problem. check settings > email+accounts > you should ideally have only one(1) 'microsoft account' in there. if you want to use another one, you might want to just 'change' the existing one with your new credentials.

Sender File Adapter - FTP

XI is picking up While File is being written in the Specified Directory. XI uses File adapter ( FTP transport Protocal ) . If file being written is very large ( It may take couple of minutes ) XI picks it up in parts for every 1 minute ( It was configured like that ) and try to send over Which is not correct. Is there any workaround to this issue. In PI 7.0, for NFS file system, SAP included modification check but it doesn't work for ftp file adpater. Basically XI should wait to pickup file until the file written completely in the Source System.
Anyone have any Idea how to overcome this issue ?

Hi,
You could use the Advanced mode checkbox in the file adapter, to specify the time the adapter has to wait, before it checks if the file has been modified.
In case, the file has been modified, after the adapter read the file, the data in the adapter cache is discarded and the updated/modified file is taken from the source path specified.
This would work, only if you have not specified "recordsets per message" during content conversion.
Regards,
Smitha.

Exception caught by adapter framework: unable to create a socket

Hi All,
I am using Idoc to XI To SOAP scinario. I got a alert asying that some messsage id is error. When i am trying to monitor that massage by taking help of the messgae id in the alert the message was successful in the SXMB_MONI,. Then i Went to message monitoring There the message statu was syetem error. Errror log is *Exception caught by adapter framework: unable to create a socket*. The communication channel was inactive wehere as the statsu of the channel was active in the directory... what is the reasonm for this error. and how to resilev this.

As pointed already, a socket exception occurs when then message cannot pass the Firewall settings....there will be a port configured to send message to the SOAP receiver.....ask network guys to make relevant settings so that the port is free from Firewall restrictions.
@Supriya --> Active/ Inactive status of the channel in ID and in CC monitoring are different things.
To change the status of your CC in RWB --> Stop & Start your SOAP CC....the channel will remain inactive till no message is passed through it....once a message is passed the status will change to success/ error.
You can also change the CC status to Automatic.
Regards,
Abhishek.

Java.lang.OutOfMemoryError: unable to create new native thread on Win2000

Dear all,
I install a java server (SAP J2EE) on the windows machine and run into the following problem: the total number of threads cannot exceed 1200 (as i see this in the task manager)
After it does reach this number no other tasks can be started. Thereafter i get java.lang.OutOfMemoryError: unable to create new native thread error .
However the other machine where the same distribution of Win2000 Server is installed can easily coupe with more than 2500 theads. The same is true when the safe mode on the first machine is on: I can generate more than 1200 threads. So it seems the problem has something to do with Windows itself.
I am really puzzled here, would really appreciate any help.
Thanks in advance,
Dimitry
Surkov Dimitry
[email protected]
+49.1632.492618

well, i do not supply any options when i start jvm, but it is not the course:
it also happens with c programs. however in the safe mode it works. both for c and for java program.
so it must be either some software (however memory is ok) or ...? i am lost. In some Unix system you can set the total number of threads allowed as an option in the kernal. But i guess this is not the case with windows.
Thanks a lot for your reply,
dimitry

File Adapter - FTP - Unable to Create new pooled resource

Similar Messages

Maybe you are looking for