File Adapter Issue: Not functioning when used with BIC user modules

Hi! ALL
We have been experiencing issue with file adapter, when we SeeBurger BIC user modules in sender file - FTP communication channel.
The regular FTP functionality is working fine if do not have BIC user modules defined under the module tab.However, when put in BIC user module parameters it is not picking up the file.
Also, we do not see any error logs; even the communication channel monitoring does not show any error log....only show the polling interval success, without the file being picked up.
This issue started appearing once we deployed our new sda file....as we changed our BIC mapping.
We can try doing back to our previous sda file....to see it fixes the problem.
But, before doing that ....we would like to know where the cause of this issue....Can you point us to any error logs we can find on the PI server.
Your help is greatly appreciated!!
Thank you,
Patrick.

If you configured your logging correctly you should find in the log folders
./applications/com.seeburger.jucon/
./applications/com.seeburger.bicxiadapter/
Try to scan those for recent errors - if the no log files can be found you should check the defaultTrace.

Similar Messages

Airport Express not working when used with Broadband Router **HELP!!!**

Hello.
I have an ethernet network in my house, and I am connected to the network via a Linksys router for Broadband VOIP and internet. I am on a G5 in my home office and want to stream music to my Airport Express for my home stereo in the living room, via the ethernet connection.
The problem is that when using the router in my network, only the Admin Utility sees the base station-- iTunes does not.
If I remove the router from the equation altogether and plug the network ethernet cable directly into the G5, the AX in the other room works just fine and I can get internet on the G5 in the office. The problem is that I need the router to operate my Vonage VOIP phone service and to connect a second computer to the internet as well. The IP address for the router in the home office is "192.168.x.xxx" and when I try moving it to the living room and connecting the AX to it, the Admin Asst doesn't see the AX at all.
When I connect the router to the network in the office, I can use internet on both computers and the VOIP phone service, and the AX Admin Asst. sees the base station from the other room. But again, iTunes does not.
Is there a way to configure the router to see the AX?
Thanks for your help!

Forgive me if this a little off thread, but I have just managed to get this to work and thought it might help people with similar configuration issues (mix manufacturer wireless networks)
I received an Airport Express (FW v. 6.3) for Christmas this year. I already am using a D-Link DI-524 wireless(G) router (Rev A FW 1.03) for my Comcast cable modem in my house (downstairs). What I wanted to do is to add the Airport Express in my office upstairs to my network (client mode) so that I could print from my HP Deskjet 3740 printer and listen to iTunes on my stereo through Airtunes. I have two iBooks (G3) with regular (802.11b) airport cards in them) running Tiger.
I ran into a couple of snags though. I could see the printer in Rendezvou and I could see the airport express in iTunes. I however could not print to the printer or connect to the speakers. I was able to connect to the speakers very intermittenly and then the audio would be disrupted every few seconds.
After a bit of hacking, what I found is that it seems that WPA PSK security doesn't work between the two. I changed the security to 128 bit WEP (ASCII mode). This means that you need an exactly 13 character pass phrase. This is necessary because Apple (and pretty much only Apple) supports 40 bit WEP (5 chars) and D-Link (and the rest of the Windows wireless universe) supports 64 bit WEP (7 chars), but they both support 128 bit WEP. I assume you could set both up as an open network if you were far enough from your neighbors, but I am in a townhouse complex, so I thought I probably better have some security on the network.
Now I only see one network (the one set up on my D-Link router) and I can print to my printer and stream to my stereo through iTunes (without disruption). Seems to work seemlessly now.
I should also mention that I did about three other things. I moved the LAN subnet on the D-link router to 192.168.1.1 (DHCP client address are now between 1.100 and .1.200) I had heard that this was necessary since both routers tried to use the 192.168.0 subnet, but I think this is only necessary in relay mode. I also statically assigned the IP address for the Airport Express. Finally I set up a firewall rule of Source WAN/LAN IP addresses of 192.168.1.100-200 of any protocol from ports 1-20000 to the same destination address range should be allowed to allow for all LAN traffic to be passed. I am very certain this is unnecessary and possible dangerous for security, but I thought I should mention that I did it.
Hope this might help someone.
Michael
iBook G3 (600 MHz) Mac OS X (10.4.3) D-Link DI-524 Router. Motorola Surfboard Cable Modem. Comcast Broadband

WMI InvokeMethod for StartService does not work when used with ManagementOperationObserver on IIS

Hi,
I am using .net 4.5 and C# to remotely restart the services. I am using WMI to do this task. This code works when called from windows application on the machine, but same code when used inside web application it gives exception of invalid parameter.
We saw it log error in System Event log
The machine-default permission settings do not grant Local Activation permission for the COM Server application with CLSID
{49BD2028-1523-11D1-AD79-00C04FD8FDFF}
and APPID
{49BD2028-1523-11D1-AD79-00C04FD8FDFF}
to the user IIS APPPOOL\<app pool user> SID (S-1-5-82-634865507-143429395-1373251082-3464226226-3883016302) from address LocalHost (Using LRPC). This security
permission can be modified using the Component Services administrative tool.
I am pasting below code for reference.
m.InvokeMethod(observer, "Startservice", null, null);
//wait until invoke method is complete or 30 sec timeout
int intCount = 0;
while
(!completionHandlerObj.IsComplete)
if (intCount > 60)
MessageBox.Show("Inside 30 seconds");
break;
//wait 1 sec.
System.Threading.Thread.Sleep(1000);
//increment counter
intCount++;
//see if call was successful.
if (HandlerObj.ReturnObject.
Properties["returnValue"].Value.ToString() == "0")
isStarted = true;
Dhanaji

For web apps the context will be the context of the app pool. Unless you set the app pool to run as a user account that has admin privileges on the remote machine then you won't be able to control the services on a remote machine. If you have
enabled Win auth such that the app runs in the context of the remote user then you might need to turn on delegation otherwise the hop won't work.
Note that if you are using Win auth then consider using ServiceController instead which provides the same functionality as WMI but with a cleaner syntax. This wouldn't work if you need to impersonate a user though.
Michael Taylor
http://blogs.msmvps.com/p3net

Error 48: File or folder not found when using photomerge panorama - imac photoshop elements 10

Any help is appreciated. Followed the photomerge panorama instructions and got error 48: file or folder not found.....line 16 ...
using photoshop elements 10 on imac with OSX 10.8.2
Thx

Have you recently updated your Operating system? Please try repairing permissions for your hard disk.
Please check the help document to know more about repairing permissions http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html#main_Solutio n_3__Repair_Disk_Permissions

I pod not recognised when used with usb cable

I have recentley bought a new computer, which has no firewire port ( which i had used to connect my ipod classic 40gbto my old computer without any issues. However I have purchased a usb connection cable to use with the new computer and neither windows or I tunes will recognise that i connect my ipod. I simply get a message saying usb device malfunctioned,windows does not recognise it. Although the ipod will still connect to my old computer with the firewirecable it will not connect with the usb either, any help would be greatly recieved as I have tried resetting and disk mode to no avail.

I have to say I have the same exact problem. It may sometimes be solved by putting the ipod into Disk mode before plugging it or by changing the ipod drive letter. In my case nothing have worked though, so if anyone has other ideas please tell me.

Function module not working when used with 'In Background Task'

hi,
this is my code
call function 'Z_IBD_FILL_ZINETACT'
              in background task
              destination 'SAPD220125'
              tables
                  it_net1 = it_net1
                  it_net2 = it_net2
                  it_net3 = it_net3 .
when this code is executed i am not getting any data in my internal tables i.e it_net1, it_net2, and it_net3
but i changed this code see the below code
      call function 'Z_IBD_FILL_ZINETACT'
             in background task (THIS IS COMMENTED)
              destination 'SAPD220125'
              tables
                  it_net1 = it_net1
                  it_net2 = it_net2
                  it_net3 = it_net3 .
now i am getting data into my internal tables
can any one tell me what can be the problem and how to solve it in my case
its very urgent

Hi,
Pls. go through the docu..
CALL FUNCTION
Variant 5
CALL FUNCTION func IN BACKGROUND TASK.
Additions:
1. ... AS SEPARATE UNIT
2. ... DESTINATION dest
3. ... EXPORTING p1 = f1    ... pn = fn
4. ... TABLES     p1 = itab1 ... pn = itabn
Effect
Flags the function module func to be run asynchronously. It is not executed at once, but the data passed with EXPORTING or TABLES is placed in a database table and the next COMMIT WORK executes it in another work process.
Note
This variant applies only as of Release 3.0, so both the client system and the server system must be Release 3.0 or higher.
Note
qRFC with Outbound Queue
This is an extension of tRFC. The tRFC is serialized using queues, ensuring that the sequence of LUWs required by the application is observed when the calls are sent.
For further information about qRFC, refer to the Serialized RFC: qRFC With Outbound Queue section of the SAP Library.
Addition 1
... AS SEPARATE UNIT
Effect
Executes the function module in a separate LUW under a new transaction ID.
Addition 2
... DESTINATION dest
Effect
Executes the function module externally as a Remote Function Call (RFC); dest can be a literal or a variable.
Depending on the specified destination, the function module is executed either in another R/3 System or as a C-implemented function module. Externally callable function modules must be flagged as such in the Function Builder (of the target system).
Since each destination defines its own program context, further calls to the same or different function modules with the same destination can access the local memory (global data) of these function modules.
Note
Note that a database commit occurs at each Remote Function Call (RFC). Consequently, you may not use Remote Function Calls between pairs of statements that open and close a database cursor (such as SELECT ... ENDSELECT).
Addition 3
... EXPORTING p1 = f1 ... pn = fn
Effect
EXPORTING passes values of fields and field strings from the calling program to the function module. In the function module, formal parameters are defined as import parameters. Default values must be assigned to all import parameters of the function module in the interface definition.
Addition 4
... TABLES p1 = itab1 ... pn = itabn
Effect
TABLES passes references to internal tables. All table parameters of the function module must contain values.
Notes
If several function module calls with the same destination are specified before COMMIT WORK, these normally form an LUW in the target system. Calls with the addition 1 are an exception to this rule - they each have their own LUW.
You cannot specify type 2 destinations (R/3 - R/2 connections).
(See Technical details and Administration transaction.)
Example
REPORT RS41503F.
/* This program performs a transactional RFC.
TABLES: SCUSTOM.
SELECT-OPTIONS: CUSTID FOR SCUSTOM-ID DEFAULT 1 TO 2.
PARAMETERS: DEST LIKE RFCDES-RFCDEST DEFAULT 'NONE',
            MODE DEFAULT 'N',
            TIME LIKE SY-UZEIT DEFAULT SY-UZEIT.
DATA: CUSTITAB TYPE TABLE OF CUST415,
      TAMESS   TYPE TABLE OF T100,
      WA_CUSTITAB TYPE CUST415.
SELECT ID NAME TELEPHONE INTO CORRESPONDING FIELDS OF TABLE CUSTITAB
               FROM SCUSTOM WHERE ID IN CUSTID ORDER BY ID.
PERFORM READ_CUSTITAB.
EDITOR-CALL FOR CUSTITAB TITLE 'Editor for table CUSTITAB'.
PERFORM READ_CUSTITAB.
CALL FUNCTION 'TRAIN415_RFC_CALLTRANSACTION'
     IN BACKGROUND TASK
     DESTINATION DEST
     EXPORTING
          TAMODE    = MODE
     TABLES
          CUSTTAB   = CUSTITAB.
CALL FUNCTION 'START_OF_BACKGROUNDTASK'
     EXPORTING
          STARTDATE = SY-DATUM
          STARTTIME = TIME
     EXCEPTIONS
          OTHERS    = 1.
IF SY-SUBRC = 1.
EXIT.
ENDIF.
COMMIT WORK.
CALL TRANSACTION 'SM58'.
      FORM READ_CUSTITAB                                   *
FORM READ_CUSTITAB.
WRITE: / 'System ID:', SY-SYSID.
SKIP.
LOOP AT CUSTITAB into WA_CUSTITAB
    WRITE: / WA_CUSTITAB-ID, WA_CUSTITAB-NAME,
             WA_CUSTITAB-TELEPHONE.
ENDLOOP.
ULINE.
ENDFORM.
Pls. reward if useful....

Plug-ins in Color Efex do not work when used with Lightroom? really need help

Dear all,
I am suffering the problem with some plug-ins (some others still okey) of Color Efex when I use them with Lightroom. Specifically, the image I chose to edit in Color Efex turned black as I tried to apply a plug-in, ex Detail extractor. Pls see the pic below:
Before
...and After
I am using Win XP and wondering whether this is the root of this problem? Pls help me for a solution if you know it.
Many thanks for reading and supporting!

Dear all,
I emailed Nik team and it is just exact as what you said, they are very helpful and supportive when provide me several of solutions. Thank god one amongst them solves my issue completely. I performed the following steps:
If you are able to open Color Efex Pro 4and can see part of the interface, see if you can click on the"Settings" button in the lower left.
In Settings locate the section "GPU" and expand it, in this section you will see a check box "Enable GPU Processing", uncheck this so the GPU will be disabled, then close the settings window.
Close out of Color Efex Pro 4 (click Cancel), quit out of any and all host applications (Photoshop,Lightroom, Aperture), and then relaunch Color Efex Pro 4 to see if this corrects this issue.
Thank to Nik team and you guys here. I'm now able to work with my new project better

SelectInputText With AutoSubmit, does not submit when used with LOV.

Hi,
I am using ADF with ADFBC (Jdeveloper 10.1.3.3). I have a selectinputText (With AutoSubmit = true and immediate = true) component that links to a LOV dialog. When I enter values by hand and navigate out of SelectInputText, it submits the form and everything works well. But When I choose to use LOV, although its value is changed, it does not submit the form. I tried on Return Listener to set its value with no avail. I tried field.setSubmittedValue(null) and field.setValue, field.resetValue, But I couldn't get the same behaviour when I enter values by hand. So my problem is When return from LOV selectinputText does not submit the form. How can I have the form submitted when returned from LOV? Any help is appreciated.
Best Regards,
Salim

Well I was a bit to impatient to create a test case and wait what might come out. So I investigated a bit and found out:
The code in my managed bean for the value change listener is executed, when I change the field content directly. There is code placed like this:
public void invoiceAddressPartnerNrChange(ValueChangeEvent valueChangeEvent) {
int no = (Integer)this.getEditInvoiceAddressPartnerNo().getValue();
//valueChangeEvent.getNewValue() maybe use this in future...
this.getEditInvoiceAddressPartnerId().resetValue();
AttributeBinding ab =
(AttributeBinding)getBindings().getControlBinding("AllPartnersInvoiceAddressId");
int id;
// 1. Access the FacesContext
FacesContext fc = FacesContext.getCurrentInstance();
// 2. Create value binding for the #{data} EL expression
ValueBinding vb = fc.getApplication().createValueBinding("#{data}");
// 3. Evaluate the value binding, casting the result to BindingContext
BindingContext bc = (BindingContext)vb.getValue(fc);
// 4. Find the data control by name from the binding context
DCDataControl dc = bc.findDataControl("HdsServiceDataControl");
// 5. Access the application module data provider
ApplicationModule am = (ApplicationModule)dc.getDataProvider();
// 6. Cast the ApplicationModule to its client interface
HdsServiceImpl service = (HdsServiceImpl)am;
// 7. Call a method on the client interface
id = service.getPartnerId(no);
//return "SomeNavigationRule";
ab.setInputValue(id);
this.getEditInvoiceAddressPartnerId().setValue(id);
But this method will NOT be executed when the field content is changed by the LOV's returning value.
So I searched for another method and found the return listener of the field to be adequate. There I placed similar code by use of the return value:
public void test(ReturnEvent returnEvent) {
Object o = returnEvent.getReturnValue();
int no = Integer.parseInt(o.toString());
this.getEditInvoiceAddressPartnerId().resetValue();
this.getEditInvoiceAddressPartnerNo().resetValue();
AttributeBinding ab = (AttributeBinding)getBindings().getControlBinding("AllPartnersInvoiceAddressId");
int id;
// 1. Access the FacesContext
FacesContext fc = FacesContext.getCurrentInstance();
// 2. Create value binding for the #{data} EL expression
ValueBinding vb = fc.getApplication().createValueBinding("#{data}");
// 3. Evaluate the value binding, casting the result to BindingContext
BindingContext bc = (BindingContext)vb.getValue(fc);
// 4. Find the data control by name from the binding context
DCDataControl dc = bc.findDataControl("HdsServiceDataControl");
// 5. Access the application module data provider
ApplicationModule am = (ApplicationModule)dc.getDataProvider();
// 6. Cast the ApplicationModule to its client interface
HdsServiceImpl service = (HdsServiceImpl)am;
// 7. Call a method on the client interface
id = service.getPartnerId(no);
//return "SomeNavigationRule";
ab.setInputValue(id);
this.getEditInvoiceAddressPartnerId().setValue(id);
Since this method is executed, my calulation works both ways: Directly entered values and values coming back from the LOV.
Maybe this is kind of trivial and my code is a bit crappy, but it is a solution.
What I don't like is the redundance in the code I needed to implement twice..

I have created a PDF with mp3 audio clips, the file works on PC's with audio playback (WIndows 7, 8 ) however the audio does not play when hosted on a website or an ipad/tablet computer or smart phone when used with PDF reader

I have created a PDF with mp3 audio clips, the file works on PC's with audio playback (WIndows 7, 8 ) however the audio does not play when hosted on a website or an ipad/tablet computer or smart phone when used with PDF reader

adobe42135678 wrote:
the audio does not play when hosted on a website...
When viewing in what browser?

I have a folder with 10 folders inside it, 8 of the folders will not function when I use "show view options".

I have a Folder with 10 Folders inside it, 8 of the Folders will not function when I use "show view options", they always default back the default. The "show view options" works on all my other Folders in my system, even on the first two of the Folder in question. How can I correct it? I have tried every thing I can think of, even deleting the Folders & reintalling them. For some strange reason the "show view options" only does not work on the last 8 Folders in the Folder in question.

Instead GarageBand recognize my keyboard and i can play normally, also, if it can help, those are the Audio and Midi Logic Preferences and the Controller Surfaces Setup with the keyboard connected :

HT204168 touch screen function not working when using facetime

Why is my iPad touch screen function not working when using FaceTime?

Hi megascones,
I apologize, I'm a bit unclear on the exact nature or scope of the issue you are describing. If you are having issues with the touch screen on your iPad, you may find the troubleshooting steps outlined in the following article helpful:
If the screen on your iPhone, iPad, or iPod touch doesn't respond to touch - Apple Support
Regards,
- Brenden

How can i set songs within a playlist, or an entire playlist, so that they are not included when using the shuffle function on IPOD Classic? Is this possible?

How can i set songs within a playlist, or an entire playlist, so that they are not included when using the shuffle function on IPOD Classic?
Is this possible?

You can set any song to Skip when shuffling.
In your iTunes Library, highlight the song and right-click/Get Info. On the Options tab is the Skip when shuffling box. Select that and then Sync the iPod with your Library.

Why is my touch screen function not working when using facetime

Why is my touch screen function not working when using facetime

Hello megascones,
After reviewing your post, it sounds like the screen is not responding to touch in one app. I would recommend that you read this article, it may be able to help the issue.
If the screen on your iPhone, iPad, or iPod touch doesn't respond to touch - Apple Support
Restart your device. If you can't restart, reset your device.
Thanks for using Apple Support Communities.
Have a nice day,
Mario

Error "this apple id has not yet been used with the itunes store" when login from itune

when i go to itune and login via apple id there is error "this apple id has not yet been used with the itunes store"
how i can solve it..

I'm having the exact same issue as the two of you. I linked my paypal, I made a whole new Id, nothing works. I've emailed the support team @ Express Lane, and I'm waiting to hear from them. Have either of you gotten help with this issue?

When i sign in my account on itune,they say " this apple id has not yet been used with the itune store', when i sign in my account on itune,they say " this apple id has not yet been used with the itune store'

when i sign in my account on itune,they say " this apple id has not yet been used with the itune store', when i sign in my account on itune,they say " this apple id has not yet been used with the itune store' help me

Follow the on screen prompts to finish setting up your Apple ID for use in the iTunes Store, or post any issue you are having with details.

File Adapter Issue: Not functioning when used with BIC user modules

Similar Messages

Maybe you are looking for