Receiver file adapter problem in file to file scenario

My situation is: I created the scanrios with file adapters, using
FTP, the sender adapter is picking up the file, but the output file
is not been created in the path mentioned, both the adapter status
looks green, I have no error message in the sxmb_moni for this
scenario. my adapter status looks as below:
kris_scenario1_filetofile_receiverCC Receiver Adapter v2112 for
Party '', Service 'krishna_bussystem01':
Configured at 2006-05-28 20:14:19 EDT
No message processing until now
kris_scenario1_filetofile_senderCC Sender Adapter v2126 for
Party '', Service 'krishna_bussystem01':
Configured at 2006-05-28 20:11:35 EDT
History:
- 2006-05-28 20:16:25 EDT: Polling interval started. Length: 10.000 s
- 2006-05-28 20:16:25 EDT: Processing finished successfully
- 2006-05-28 20:16:25 EDT: Processing started
- 2006-05-28 20:16:15 EDT: Polling interval started. Length: 10.000 s
- 2006-05-28 20:16:15 EDT: Processing finished successfully

Moorthy,
as you suggested I checked in MDT, FYI I am doing without content coversion. from the below message I dont see any problem, so what could be a problem
The sender has 'delivered' status but the receiver has 'to be delivered' status
Receiver audit log:
2006-05-29 00:07:56 Success The message was successfully received by the messaging system. Profile: XI URL:
2006-05-29 00:07:56 Success Using connection AFW. Trying to put the message into the receive queue.
2006-05-29 00:07:56 Success Message successfully put into the queue.
Sender audit log:
2006-05-29 00:07:54 Success Send binary file "filetofile.xml" from FTP server "xx.xx.xxx.xxx:/yyyyy", size 221 bytes with QoS EO
2006-05-29 00:07:54 Success Application attempting to send an XI message asynchronously using connection AFW.
2006-05-29 00:07:54 Success Trying to put the message into the send queue.
2006-05-29 00:07:54 Success Message successfully put into the queue.
2006-05-29 00:07:54 Success The application sent the message asynchronously using connection AFW. Returning to application.
2006-05-29 00:07:54 Success The message was successfully retrieved from the send queue.
2006-05-29 00:07:54 Success File "filetofile.xml" deleted after processing
2006-05-29 00:07:54 Success The message status set to DLNG.
2006-05-29 00:07:55 Success The message was successfully transmitted to endpoint http://host:port/sap/xi/engine?type=entry using connection AFW.
2006-05-29 00:07:55 Success The message status set to DLVD.

Similar Messages

Receiver mail adapter problem

I am doing File -XI-Mail scenario.I am able to pickup the file but don't receive any mail.In RWB in communication channel monitoring I can see the error log for receiver mail adapter.The error is
"failed to send mail: java.net.SocketException: Network is unreachable: connect"
The configuration parameters I am using are:
Transport Protocol:SMTP
Message Protocol:XIALL
URL:smtp://Outlook server host
Userid:xxxxx
PWD:xxxxxx
I am at client network and the my outlook server is in my company network which we connect using VPN from client.Is this could be the reason for this error?
Please let me know if someone has come across such error.
Thanks,
Rekha

hi,
>>>"failed to send mail: java.net.SocketException: Network is unreachable: connect"
probably there's no communication between your XI server and mail server machine and XI server cannot access the mail server
you need to report it to your network admin so it will allow the connection
or he will set up a mail server on the XI server machine
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

Receiver FTP Adapter Problem

Hello. My scenario is: A file is sent from R/3 via RFC, then from XI to an outside system using the FTP adapter. The RFC part is working, but I've encountered some errors with my FTP adapter. The file is not being created in my directory at all and this is the error message I'm getting:
- 2006-10-11 08:28:20 CDT: Error: Message processing failed: Exception: ftp access error: com.sap.aii.adapter.file.ftp.FTPEx: 552 transfer failed
Can anyone help, please?
Thank you.
Nicole

Hi Nicole,
A few things you might check are:
1) The Ip address given is correct.
2) The login details given in File receiver adpater are right
3) The server is running when you make the transfer, that is 'Allow logins' status is checked in case of guild FTP server or similar servers.
4) The destination directory is given as "/root" with "/" slash.
5) All the firewalls are turned off.
6) File processing mode is 'Create'.
Cheers,
Ashish

Receiver SOAP Adapter Problem-soap fault: Server did not recognize the valu

I have a scenario for service orders using async call : IDOC-XI-SOAP.
I used the XML Spy tool to test the Service order's web services and it works fine. I imported the same WSDL file in XI. When I send a SOAP message from XI, I get a following error in the adapter engine.
MP: exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server did not recognize the value of HTTP Header SOAPAction: AddUpdateCostObjectLevel1.
Can someone please help me...
Thanks in advance!
Mrudula

This problem is resolved by me by passing the "http://company's URL/AddUpdateCostObjectLevel1" in the SOAP action.
Thanks to all for your input.
Mrudula

Receiver SOAP adapter problem

Hi,
I am getting the following error in moni when i try to consume a webservice. Even SOAP scenarios that were working fine before also are throwing the same error.I have checked some threads regarding the same error and did as mentioned in the same, but of no use. I executed that webservice alone and it is working fine. Any help on this will be appreciated.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: invalid content type for SOAP: TEXT/PLAIN</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Regards,
Sudheer.

Hi Sudheer,
Let me confirm again...From XI , you are making a SOAP call using the SOAP receiver adapter..right ?
If that is the case and you are telling sometimes it works and sometimes it doesnot, it indicates the SOAP service you are invoking from XI due to some reason is sending back non-soap response...
we had encountered scenarios couple of time like this because the user we were using to execute the SOAP call had expired and the SOAP service was returning and HTTP-UNauthorized message back and then in MONI it would show up as the same error as what your are getting.
To check this, (the request/response going back and forth), in my earlier post i suggested using the TCP gateway...
Thanks.

Receiver SOAP Adapter Problem-HTTP 401 Unauthorized

We are using XI-7.0. We have scenario IDOC >> XI >> SOAP by making asynchornous call.
Vendor has two web server - A and B. Both the servers set up are identical in the vendor system.
Web server "A" works fine from XML spy tool as well as XI for sending service order SOAP messages.
Web server "B", we are able to send SOAP messages from XML spy successfully and vendor also confirms that it updates database in their system.
But we are not able to send SOAP messages from XI on Server "B". We are getting following error message in the adpter engine.
Can someone please help me? Thanks!
SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 401 Unauthorized
MP: exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 401 Unauthorized
Exception caught by adapter framework: SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 401 Unauthorized
Delivery of the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 401 Unauthorized.
Thanks!
MP

Hi Riya,
For SSL configuration you can check,
Rajendra's blog http://scn.sap.com/people/rajendra.badi/blog/2011/11/23/pi-711-transport-level-secuirty-communicating-with-external-web-service-from-soap-adapter-through-ssl
Khade's blog http://scn.sap.com/people/s.khade/blog/2011/09/06/secured-connection-to-external-web-service-using-sap-xipi.
Regards.

Problem in Receiver File adapter :Module XML2PLAIN

Hi Friends,
I have a FILE -> FILE scenario ,In this when I am downloading the data in XML format it is getting downloaded successfully.The output look like this ...
I have only one field to be displayed in the output.
<?xml version="1.0" encoding="utf-8" ?>
<Returnkey>
<field1>000000000621185CA</field1>
</Returnkey>
Module Name Modulekey
localejbs/AF_Modules/MessageTransformBean XML2Plain
Module key parametername parameter value
XML2Plain Transform.Class com.sap.aii.messaging.adapter.Conversion
XML2Plain Transform.ContentType text/plain;charset=utf-8
XML2Plain xml.addHeaderLine 0
XML2Plain xml.conversionType SimpleXML2Plain
XML2Plain xml.fieldFixedLengths 25
Please some one help me out I,I have tried all the options and I cant use File content conversion in this case ,(I have JMS adapter which actually sends this information to MQ,as it is working in XML format AND not in plain format ,I am testing this temporarily with a receiver file scenario)
Thanks in advance.

Hi
you can use the following modules and the parameters.
Processing sequence :
localejbs/AF_Modules/MessageTransformBean
localejbs/SAP XI JMS Adapter/ConvertMessageToBinary
localejbs/SAP XI JMS Adapter/SendBinarytoXIJMSService
Module Configuration:
Transform.Class----
>com.sap.aii.messaging.adapter.Conversion
TransformContentType----
>text/plain;charset=utf-8
xml.addHeaderLine----
>0
xml.conversionType----
>SimpleXML2Plain
xml.fieldFixedLengths----
>10,10,10(for ex)
xml.fixedLengthTooShortHandling----
>Cut
if you still face the problem please reply me back.
Thanks
Rinku

Problem with file content conversion in receiver file adapter

Hi All
I have a problem with file content conversion in receiver file adapter.
This is my recordset structure: Header_Record,1,Claim_Record,*,Check_Rec,1
These are the content conversion parameters:
Header_Record.fieldSeparator = ,
Header_Record.endSeparator = 'nl'
Claim_Record.fieldSeparator = ,
Claim_Record.endSeparator = 'nl'
Check_Rec.fieldSeparator = ,
Check_Rec.endSeparator = 'nl'
In SXMB_MONI, i can see that the data is correctly extracted from proxy, and correctly mapped to receiver message, and i see a checkered flag (success).
But, Adapter status is RED with the following error message:
Conversion initialization failed: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Parameter '1.fieldFixedLengths' or '1.fieldSeparator' is missing
In communication channel monitoring, i get the following error message:
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Channel has not been correctly initialized and cannot process messages
What is going wrong here? Can anyone please tell me?
Thanks
Chandra

Posted in Incorrect forum.
Posted again in Process Integration forum

Problem with fixedlenthgs in receiver file adapter

HI,
I am doing XML to flat file scenario and using mutli mapping concept without BPM.
in the receiver file adapter I am using FCC with fixedlengths,then it generated just 3 output files out of nearly 100 source files.the errored one are succcessful in the SXMB_MONI and failing in RWB-->Message moni with waiting status and MDT says that XI_J2EE_ADAPTER_FILE ,Error Code PROCESSING_ERROR .
i tried in SDN and then found something like enable the disablesecurity check box in variable substitution parameters ,then I got 4 files out.
these are my FCC params for all structures:
struc1.fieldFixedLengths
struc1.fixedLengthTooShortHandling
struc1.endSeparator
and I tried with fieldSeparator then it gives successfully all output files.
so,where is the problem?I didnt understand?
any suggestion.
thank you,
regards,
Babu Sri

Bhavesh,
I felt the same way,but assumed that ,in that way fixedlenghths wont work.
in my target structure most of the fields have 0-1 occurences ,and even in the source structure too.so,I think it might be the reason.Then I have to make all my about 60fields 1-1 madatory and using mapWithDefaultValue function, as my sources are optional.
you think it will work just using the "mapWithDefaultValue" function without changing my occurences to 1-1 in the target structure(mandatory)?infact I can try but ,cos of pain for changing like 60 fields....:) and even dont know which fields are causing the problem,so that we can apply "mapWithDefaultValue" function only on those fields.
thank you,
Babu Sri

Problem in Variable Substitution (Receiver File Adapter)

Hi,
I am facing problem in the variable substitution in receiver file Communication channel. My expected file name is A_C.xml; but my actual output filename obtained is C_C.xml for the below example target file:
<ProductionSch>
<CustomField>
<value>
<ValueString>A</ValueString>
</value>
</CustomField>
<CustomField>
<value>
<ValueString>B</ValueString>
</value>
</CustomField>
<CustomField>
<value>
<ValueString>C</ValueString>
</value>
</CustomField>
</ProductionSch>
I have used the following parameters in the file communication channel:
File Name Schema: %var1%_%var2%.xml
Variable Substitution:
Variable Name Reference
var1 payload:ProductionSch,1,CustomField,1,value,1,ValueString,1
var2 payload:ProductionSch,1,CustomField,3,value,1,ValueString,1
When I try using either of the one in the file name schema and the corresponding variable reference in the variable substitution I am getting the correct output filename as A.xml or C.xml. However, when I give either of the one variable in file name schema and both the variable references in the variable substitution I am getting only C.xml as per the example file.
Can any of you suggest me where I am wrong or any other suggestion which I can try?
I cannot use dynamic configuration as I am using multimapping. Multiple file names cannot be generated using dynamic configuration.
Regards
Sowmya

hi Sowmya,
refer you to this [Note 1581988 - Variable Substitution option does not work properly|https://service.sap.com/sap/support/notes/1581988] (2011.05), as SAP says " when there is more than one variable using the same name as the last element, File Adapter does not select the correct one.... ".
regards.
Mickael

Receiver File Adapter Content Conversion Problem.

Hi All,
I am getting in receiver file adapter due to content conversion setting. Problem is that all the fields coming in file adapter are optional. In content conversion , i have specified fieldfixedlengths. So whenever any optional field is not present , it fails . How should we handle it? is there any option to declare fields as optional, I know that is the there for sender adapter. But no. of fields is also very large, so putting each and every field as optional is very time consuming.
What should i do?
Ranjeet Singh.

Hi Daniele,
Instead of using the standard funciton , i created a UDF for handling this situation.
My logic is UDF is like
 //write your code here
int Size = Integer.parseInt(Truncate_Size);
String Return_Value = "";
 if (!("".equals(Input)) )
 if (Input.length() > Size )
 Return_Value = Input.substring(0,Size);
 else
 Return_Value = Input.substring(0, Input.length());
 else
 for(int i = 0; i< Size ; i++)
 Return_Value = Return_Value + " " ;
return Return_Value;
SO in this case also , it should be able to handle empy source element. But it is not working.

Problem: The same filename from a sender to a receiver file adapter - SP14

Blog : /people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
My Problem:
The thing works for me and i am able to get my input files name as my output file name. But one thing i noticed is that in my target message, the field where i have mapped the code it always returns the value "null" but finally when the file is created i get the required result.
My input file name is input.txt and i get the same name in my output file too.
In sxmb_moni if i check DynamicConfiguration link i see the following
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <sap:DynamicConfiguration xmlns:sap="http://sap.com/xi/XI/Message/30">
<sap:Record namespace="http://sap.com/xi/XI/System/File" name="SourceFTPHost">10.25.116.98:21</sap:Record>
<sap:Record namespace="http://sap.com/xi/XI/System/File" name="Directory">/input/test</sap:Record>
<sap:Record namespace="http://sap.com/xi/XI/System/File" name="SourceFileTimestamp">20060228T112200Z</sap:Record>
<sap:Record namespace="http://sap.com/xi/XI/System/File" name="FileType">bin</sap:Record>
<sap:Record namespace="http://sap.com/xi/XI/System/File" name="FileName">input.txt</sap:Record>
<sap:Record namespace="http://sap.com/xi/XI/System/File" name="SourceFileSize">770</sap:Record>
</sap:DynamicConfiguration>
But when i check my mapped field i see
<field3>BodyC</field3>
<keyfield>02</keyfield>
<field5>BodyE</field5>
<field6>BodyF</field6>
</Body>
- <Trailer>
<keyfield>03</keyfield>
<field2>null</field2> -> Null value instead of input.txt
</Trailer>
</ns0:MT_Putfile>
The code i have used to map the field2 of the trailer is the following ....
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileType");
String valueOld = conf.get(key);
return valueOld; 
Any clues ?

Gosh this is spooky
Anyway i tried with that line of code but it throws me an error during activation ...
Activation of the change list canceled Check result for Message Mapping mm_IS | http://t-systems.com/Shabarish: Starting compilation Source code has syntax error: /usr/sap/TXT/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Map387c7300a9ac11da9d280011256afae8/source/com/sap/xi/tf/_mm_IS_.java:104: cannot resolve symbol symbol : method getTransformationParameters () location: interface com.sap.aii.mappingtool.tf3.rt.GlobalContainer DynamicConfiguration conf = (DynamicConfiguration) container.getGlobalContainer().getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION); ^ 1 error
The code is :
DynamicConfiguration conf = (DynamicConfiguration) container.getGlobalContainer().getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
//DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
//String valueOld = conf.get(key);
String valueOld = conf.toString();
return valueOld;
Thanx Renjith so far .. but i hope this gets resolved (else i will loose my sleep thinkin abt the situation)

Problem with Receiver File adapter

Hi
I have a problem with receiver file FTP adapter, while writting file in target folder, connection is failing, after retries, it writting file again. How to avoid this situation, is there any way to write the leftout part in the file.
VS

Hi
Thank u all, Problem is solved, i changed write mode to Over write existing file. It is working fine.
VS

Problem in Overwriting the file in Receiver File adapter

Hi all,
I configured my scenario Proxy to File. Every day the back ground job runs in SAP and send all Employee Details to XI, XI then write it into File in XI server, in Receiver File adapter i enable overwrite existing file.
But some times its over writing the file some times came up with error like "Access Denied".
Can any one tell me what could be the problem.
Kind Regards,
Kiran

> But some times its over writing the file some times
> came up with error like "Access Denied".
This can be a Authorization problem...may be at that time you are unable to write any file in that directory..or some other application is using it and it make a lock at that time.
Thanks
Farooq.

File Receiver Adapter problem

Hello Friends,
I am doing a simple File to File scenario. The scenario has succussfully gone through the pipeline steps and so it is successful in sxmb_moni. But the output file has not been generated. I have checked the communication channel monitoring for the receiver file adapter. There, its status is "green" and "functioning", but under "Processing Details for Cluster Node" i am not getting any logs/messages which tells us when the process has statred and ended.
In message monitoring, the status is "To be delivered" and its not getting changed.
Please guide me to solve this issue.
Thanks & Regards,
Senthil.

Hi
First check
1) Receiver FTP Details if it is correct (Floder having right credentials to write file)
2) In Message Monitoring "To be delivered status" u can send it from there itself "Resend"
If not happening delete all Messages of "To be delivered status" and resend again it would work
Moreover check Smq1 / smq2 Queues if it is stuck
For processing u have for sure clear off all messages in "To be delivered state' first r else all messages will be in pipeline
Better ---> SXMB_ADM --> Deactivate / Activate Queues
Rgds
Srini

Problem with File Content Conversion (Receiver FIle Adapter)

Hi Experts,
I have following structure in receiver side:
MT_Test
 F1
 F2
 F3
 F4
Now I want a CSV file in target side in below format:
F1,F2,F3,F4
I have provided below config in receiver file adapter under content conversion tab:
Recordset Structure : MT_Test
MT_Test.fieldSeperator= ,
MT_Test.endSeperator= 'nl'
But this is generating blank CSV files in target directory..What might be the reason.. I have checked the msg in adapter engine, the XML file is correct and contains valid values for the fields..Its something like below:
<?xml version="1.0" encoding="UTF-8" ?>
<MT_Test>
 <F1>Hai</F1>
 <F2>Hello</F2>
 <F3>Bye</F3>
 <F4>Hi</F4>
</MT_Test>
I should get CSV file as
Hai,Hello,Bye,Hi
But I am getting a blank file with above said config parameters in content conversion tab.
What might be the reason for getting blank CSV files in target side???
Thanks,
Adi

Hi Adi,
>>My target structure in below format:
<?xml version="1.0" encoding="UTF-8" ?>
- <MT_Test>
<F1>Hai</F1>
<F2>Hello</F2>
<F3>Bye</F3>
<F4>Hi</F4>
</MT_Test>
So, try to edit Data type and include hierarchy level above <F1>.
Finally your Target Structure will resembles like this.
<?xml version="1.0" encoding="UTF-8" ?>
- <MT_Test>
<Structure>
<F1>Hai</F1>
<F2>Hello</F2>
<F3>Bye</F3>
<F4>Hi</F4>
</Structure>
</MT_Test>
FCC Parameters will be like this.
Structure.fieldSeparator = ,
Structure.endSeparator = 'nl'
Hope you were clear.
Thanks,
Siva.

Receiver file adapter problem in file to file scenario

Similar Messages

Maybe you are looking for