File cache causing problems?

Since installing Mavericks I experience pauses when switching between apps. I have the full16 meg capacity RAM and have not had this problem in prior versions of OS X. I note I have 8.3 meg of "file cache" and 3  meg of free memory. Is the file cache causing the problem? Any other ideas?

When you have the problem, note the exact time: hour, minute, second.   
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above. Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first. Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Similar Messages

  • Image scale caching causing problems

    I have an app with a image that the user must be able to zoom and scroll.
    When the image is first loaded it is at full view. When the user zooms the memory usage sky rockets, and during this zooming the app is very laggy.
    Once the memory has added about 70Mb, the zooming runs without lag.
    If the user waits however, the memory usage goes back down, the scaling lags again, and the memory fills again.
    I have been able to get around this with making the height an odd number of pixels.
    This causes the memory to stay at the +70Mb and prevent lagging, but this may not be a permanent solution.
    Is there any way to prevent the GC from wiping the scale information? Or any way to manage how the cached scale data is stored?

    The image is large. The app is for iOS and Android devices.
    The images are 5464x3073 (should be 3072, but made it odd to prevent problem), they are simply scaled to fit the screen (usually about 0.2 scale).
    Till this point is fine, obvious pause when loading the image, but when the user zooms in, the memory gets an extra 70Mb(if you zoom all the way in) and stays for about 10-20 seconds. During this time zoom is smooth. When the memory goes back down the process of zooming causes lag and memory usage again.

  • Image caching causing problems

    I am making a Java based game. I'm using a mixture of static and animated gifs (things should switch to animated gifs now and then e.g. when something explodes).
    I am using Tookit.getImage() to get images, e.g.
    Toolkit kit;
    Image image;
    image =  kit.getImage("images/Explode.gif");This caching is all very well for the static gifs, but very bad for the animated ones. For a 'repeat once' gif, it'll only ever play once upon first load, in future it just starts at the end of the animation. If I have the gifs repeat forever, all instances of the gif are synchronised at the exact same point (so if something is already exploding, then another explodes, it would start mid animation).
    The Toolkit API suggests createImage (because getImage implements its own caching), but with createImage, the gifs don't animate whatsoever (they just display the initial frame). Anyone got any ideas to get independant instances of animated gifs working?
    Thank you

    Use a so called "sprite sheet" instead. Thats a single image, which contains all the frames next to each other.
    A sprite sheet can look like this:
    http://kaioa.com/k/newexplosion7_sheet.png
    (Note that this one has full alpha. Drawing it will be very slow usually.)
    And here is one with bitmask transparency:
    http://kaioa.com/k/dither_ex.png
    For displaying the animation you simply draw a specific region of the image each frame. You can do that for example with that drawImage method, which takes 2 clipping regions (4 coord pairs).
    Getting "independant instances" is a matter of using seperate counters for each explosion on screen. You can for example use some Explosion object, which holds x, y and the frame number.

  • I am using itunes 10 and trying to consolidate my files.  I keep getting the error "Copying files failed.  The file name was invalid or too long".  How can I indentify what file is causing this problem or resolve this issue?

    I am using itunes 10 and trying to consolidate my files.  I keep getting the error "Copying files failed.  The file name was invalid or too long".  How can I indentify what file is causing this problem or resolve this issue?

    BUMP
    Yes, I just get that message. I don't see how I could investigate this problem.
    I didn't mention that this happened when I was consolidating my library, not copying files to another computer.
    In other words, I'm using a "normal" itunes procedure, itunes won't complete it, and won't tell me exactly why or how to figure out how to fix it...
    Is there at least some easy way to tell which files were successfully copied to my itunes music folder so I can work on moving the uncopied files?
    Can anybody help me?

  • File Vault encryption locked up.  No progress for 24 hrs.  If I restore from a non-encypted back-up will this cause problems?

    Started file vault yesterday and no progress for 24 hrs.  If I do a Command-R restore from a non-encrypted back-up will this cause problems?

    You first must repartition and reformat the drive before restoring your backup.
    Install or Reinstall OS X from Scratch
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Erase the hard drive:
      1. Select Disk Utility from the main menu and click on the Continue button.
      2. After DU loads select your startup volume (usually Macintosh HD) from the
          left side list. Click on the Erase tab in the DU main window.
      3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
          the Security button and set the Zero Data option to one-pass. Click on
          the Erase button and wait until the process has completed.
      4. Quit DU and return to the main menu.
    Reinstall OS X: Select Reinstall OS X and click on the Install button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
               because it is three times faster than wireless.
    This should install the version of OS X that you had installed.

  • I want to uninstall ReloadEvery as I think it is causing problems however it is not in my list of Extensions or Plugins yet it is clearly installed, I tried reinstalling FF but it was still there! How can I get rid of it?

    I installed ReloadEvery a while ago and it seemed to be working fine however I am now having problems with FF crashing and weird things like pages not reloading and not being able to use the back button etc
    I have already tried uninstalling and reinstalling FF and upgrading to FF 4.
    When I upgraded to FF 4 I was still having problems even though I didn't have any Extensions installed at all, or so I thought. I noticed that ReloadEvery was still installed. I was rather puzzled as I had done a clean install of FF 4. I want to remove ReloadEvery to see if it will solve my problems.
    I have also tried following the help on the FF Troubleshooting about manually uninstalling Extensions but again ReloadEvery not listed there yet I am still able to use it in FF!
    I want to get rid of it!! I really need some help please.

    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    *Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Tools > Options > Privacy > Cookies: "Show Cookies"
    If clearing cookies doesn't work then it is possible that the <i>cookies.sqlite</i> file that stores the cookies is corrupted.
    Rename (or delete) <b>cookies.sqlite</b> (cookies.sqlite.old) and delete other present cookie files like <b>cookies.sqlite-journal</b> in the Firefox Profile Folder in case the file cookies.sqlite got corrupted.
    *http://kb.mozillazine.org/Cookies

  • Windows 8.1 Client Side Caching - Is it possible to specify the location of the offline file cache?

    Hi,
    Is there any approved way to change the location of the offline files cache in Windows 8.1?  I'm asking before moving client systems from Windows 7 where a registry change was required - is this still the way to go?
    I believe that if the default user-profile directory is moved, this causes problems for updates to Windows 8/8.1 now, is the same true if you move CSC?
    Just a bit of background.  The systems I want to do this for have smallish SSD boot drives with a higher capacity spinning disk.  The machines are members of a domain with Folder Redirection setup.  I could setup group policies to disable
    caching of some of the larger directories or even disable CSC entirely on the machines which have an SSD boot drive, but would prefer not to do so.
    Thanks in advance.

    Hi,
    According to your descryption, In windows 7, the tool is migwiz.exe, namely the Windows Easy Transfer, you can modify the registry in the way listed in the post below:
    http://social.technet.microsoft.com/Forums/en-US/bbf5890c-b3d7-4b38-83d8-d9a5e025fb2b/how-to-move-clientside-caching-to-a-new-location?forum=w7itproinstall
    In Windows 8, Windows easy transfer is also a built in tool to migrate user profiles and user settings, but as for the offline transfer, I suggest to use the USMT for your situation.
    Because with USMT you can specify the folder that you want to migrate the files to, by using an offline.xml you can set the path just as the sample listed below:
    <offline>
         <winDir>
              <path>C:\Windows</path>
              <path>D:\Windows</path>
              <path>E:\</path>
         </winDir>
         <failOnMultipleWinDir>1</failOnMultipleWinDir>
    </offline>
    You can also refer t othe details at:
    http://technet.microsoft.com/en-us/library/hh824880.aspx
    Regards
    Wade Liu
    TechNet Community Support

  • Yosemite 10.10.1 - File cache

    Hi,
    I've just installed Yosemite 10.10.1 on my MBP 2011 and the File Cache keeps "eating" my RAM memory while only 4 to 5 app are open.
    Does anyone have the same issue? Any recommendation?
    Thanks.
    Bertil

    I have same problem on iMac (20 inch , early 2008) Memory 4GB.
    You most likely do not have the same problem.  You should start your own new post and not threadjack wbertil's discussion.
    If you are using too much virtual memory that would indicate Apps that either have a memory leak or you are running apps that want more RAM than you have available to give.
    There is a known issue with Apple Mail when using attachments where it can go crazy and consume huge amounts of virtual memory.
    You might also consider running EtreCheck and removing most of the 3rd party additions listed unless you absolutely need them.  Especially anti-malware, automatic cleaning utilities, etc... as they tend to actually hurt your performance, not help.
    <https://discussions.apple.com/docs/DOC-6174>
    If Apple Mail is 'not' your virtual memory issue, then try booting into Safe Mode and see if that improves things.  Safe Mode will 'not' load any of the 3rd party stuff you have installed, and if things improve, it is a strong indication that one or more of those 3rd party additions are causing your issues.
    <http://support.apple.com/kb/ht1564> 

  • Is there a solution to Rapidweaver Stacks Cache size problems?

    Is there a solution to Rapidweaver Stacks Cache size problems?
    My website http://www.optiekvanderlinden.be , has about 100 pages and is about 250MB in size. Every time I open RapidWeaver with the Stacks-plugin, the user/library/cache/com.yourhead.YHStacksKit folder grows to several Gigabytes in size. If I don't  manually empty the com.yourhead.YHStacksKit Cache daily, AND empty the Trash before i turn off my mac, my Mac still has problems and stalls at startup the next day. Sometimes up to 5 minutes and more before he really boots. If i have a been working on such a large site for a few weeks without deleting that cache, than my iMac doesn't start up anymore, and the only thing left to do is completely reinstall the iOs operating system. This problem doesn't happen the days i use all my other programs but don't use Rapidweaver.
    Does anyone know a solution and / or what is the cause of this?

    once more,
    i just launched my project in Rapidweaver, and WITHOUT making any changes to my pages, the cache/com.yourhead.YHStacksKit folder filled itself with 132 folders (total 84Mb), most of them containing images of specific pages etc. The largest folder in the cache is the one with the images of a page containing a catalogue of my company, this folder is 7Mb. It seems by just starting up a project, immediately different folders are created containing most of the images in my project, and some folders with a log.txt file. Still i don't see the reason why it is filling op a huge Cache even without making changes to the project. I have 2 different sites, so 2 different projects, and i get this with both of them.

  • HELP! File cache Maxed out at startup

    Hello everyone, I have used this forum to answer my everyday questions but I have not found the answer to this question. As of late my Mac's file cache gets maxed out instantly. I have 32GB of RAM and near 28GB gets used up in the file cache. I try using memory cleaner and the file cache will not delete. I have to use the terminal command "sudo purge" to delta the file cache. Just yesterday, I started up my mac and 27GB was already in use in the file cache.
    I recently installed Lightroom 5.7.1 and Camera Raw 8.7. And the problems have started since I installed one of these apps.

    Un-install Memory Cleaner and let the OS handle memory. It does a better job. Un-install using the developers instructions.
    Try a restart.
    Do a backup, using either Time Machine or a cloning program, to ensure files/data can be recovered. Two backups are better than one.
    Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
    Isolating an issue by using another user account
    Try booting into the Safe Mode using your normal account.  Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear and again when you log in. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don’t do them all at once.
    Safe Mode - Mavericks   also Yosemite
    Safe Mode - About

  • Null values from DB2 cause problems

    Hi,
    I have another problem with database link to DB2 using IBM iSeries Access for Linux on 64 bit OEL5 with Oracle Database gateway and unixODBC 2.2.14.
    DB link works. However, null values from DB2 cause problems. Date columns that are null on db2 return a date '30.11.0002', and character columns that are null return an error ORA-28528: Heterogeneous Services datatype conversion error.
    isql returns correct results.
    How can i fix this? Perhaps set some parameters for data conversion on the gateway?
    Thank you.

    If the driver is not fully ODBC level 3 compliant and misses functions, we're lost. But sometimes the drivers are ODBC level 3 compliant but miss the correct 64bit implementation. In those cases we can tell the gateway to use the 32bit ODBC level 3 standard by setting in the gateway init file:
    HS_FDS_SQLLEN_INTERPRETATION=32

  • FF 3.6 AND 5 on same Mac, 1 profile - can I uninstall 5 without causing problems running 3.6 or with the profile?

    I upgraded from 3.6.16 to 5, but don't like how 5 handles tabs (auto reloading 'problem loading' tabs when internet connection is reestablished). So I installed 3.6 in a separate folder, e.g. both versions are on this computer. I went back to using 3.6, and let it upgrade to either 3.6.18 or 19 (don't recall which & it's not open right now). I'm having problems with it using too much CPU & Memory, and not sure if that's a difference between 3.6.16 & 3.6.18/19, or if having 5 on the same computer even if closed could be causing the problem.
    Can I uninstall 5 without causing problems with the 3.6 version and the single profile?

    If you haven't tried this, give it a try. It worked for me, hopefully it will work for you. In your version 3 firefox, disable all extensions, I had two plugins (doubletwist and joost, disable those if you have them). Then install firefox 5 by overwriting your version 3 firefox. It should work fine after that. I tried everything before, I gave that a last ditch shot. Oh yeah, before you install firefox 5, clear your cache of everything just to be sure.
    Hopefully that helps.

  • I just updated my latest java but the update is causing problems with some externale devices. So i would like to uninstall this latest java update and get back the previous one. That should solve to problems with my external device

    i just updated my latest java but the update is causing problems with some external devices. So i would like to uninstall this latest java update and get back the previous one. That should solve to problems with my external device.
    Is this possible and how do i do that?
    Anyone who responds thanks for that!
    Juko
    I am running
    Hardware Overview:
      Model Name:          Mac Pro
      Model Identifier:          MacPro1,1
      Processor Name:          Dual-Core Intel Xeon
      Processor Speed:          2,66 GHz
      Number of Processors:          2
      Total Number of Cores:          4
      L2 Cache (per Processor):          4 MB
      Memory:          6 GB
      Bus Speed:          1,33 GHz
      Boot ROM Version:          MP11.005D.B00
      SMC Version (system):          1.7f10
      Serial Number (system):          CK7XXXXXXGP
      Hardware UUID:          00000000-0000-1000-8000-0017F20F82F0
    System Software Overview:
      System Version:          Mac OS X 10.7.5 (11G63)
      Kernel Version:          Darwin 11.4.2
      Boot Volume:          Macintosh HD(2)
      Boot Mode:          Normal
      Computer Name:          Mac Pro van Juko de Vries
      User Name:          Juko de Vries (jukodevries)
      Secure Virtual Memory:          Enabled
      64-bit Kernel and Extensions:          No
      Time since boot:          11 days 20:39
    Message was edited by Host

    Java 6 you can't as Apple maintains it, and Java 7 you could if you uninstall it and Oracle provides the earlier version which they likely won't his last update fixed 37 remote exploits.
    Java broken some software here and there, all you'll have to do is wait for a update from the other parties.

  • TS3579 I found this useful because I did not know about the effect of typing in data and that you could only drag to rearrange the data.  I had typed in data before and this had caused problems but restoring defaults did not cause correct dates to show up

    I found this  (TS3579: If the wrong date or time is displayed in some apps on your Mac Learn about If the wrong date or time is displayed in some apps on your Mac) useful because I did not know about the effect of typing in data and that you could only drag to rearrange the data.  I had typed in data before and this had caused problems but restoring defaults did not cause correct dates to show up in Finder. 

    It sounds like there are a couple things going on here.  First check if you have a successful install of SQL Server, then we'll figure out the connection issues.
    Can you launch SQL Server Configuration Manager and check for SQL Server (MSSQLSERVER) if default instance or SQL Server (other name) if you've configured your instance as a named instance.  Once you find this, make sure the service is started. 
    If not started, try to start it and see if it throws an error.  If you get an error, post the error message your hitting.  If the service starts, you can then launch SSMS and try to connect.  If you have a default instance, you can use the machine
    name in the connection dialog.  Ex:  "COWBOYS" where Cowboys is the machine name.  However, if you named the SQL Server instance during install, you'll need to connect using the machine\instance format.  Ex:  COWBOYS\Romo (where Romo
    is the instance name you set during install).
    You can also look at the summary.txt file in the SQL Server setup error logs to see what happened on the most recent install.  Past install history is archived in the log folder if you need to dig those up to help troubleshoot, but the most
    recent one may help get to the bottom of it if there is an issue with setup detecting a prior instance that needs to be repaired.
    Thanks,
    Sam Lester (MSFT)
    http://blogs.msdn.com/b/samlester
    This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
    "Mark as Answer" and
    "Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread.

  • I replaced my hard drive and used time machine to boot from but it installedthe unrepaired disk permissions of the faulty previous drive would this cause problems on my new drive?

    I replaced my hard drive on macbook pro and used time machine to boot from but it also installed the unrepaired disk permmissions of the other drive, would this cause problems to my new drive?

    Can you remember what the permissions problem was that you had before? You may need to reinstall OS X from scratch and not reinstall anything from your Time Machine backups. To be on the safe side you should reinstall all third-party applications from scratch, as well. Then only restore from your backup your document/data files.

Maybe you are looking for

  • How to Move My Library to a New Location

    The title is a bit misleading.  This is actually related to a previous discussion I started but never got any feedback on. Here is the situation: I have iTunes Match. For whatever reason, my iTunes library got hopelessly muddled and confused.  Probab

  • Is there a way for iCloud to monitor subfolders for the Photo Stream?

    I have created a folder on my hard drive called Photo Archive and it has subfolders based on year and further subfolders based on month and a further subfolder for the day.  I have pointed iCloud to the 2011 subfolder for the Upload folder.  I notice

  • How to Import NAS Library into iTunes...

    Well the problem is my dad gave me a little job to get the music from the nas into the itunes libary. i already got that part done but now he wants that he can drag the music whats inside the NAS folder into an ipod/iphone. i was look around on googl

  • Wpa psk wireless connection on windows xp not possible

    hi, installing windows xp (incl. sp2) and the mac driver with bootcamp on my mac mini. my wireless router was found but it was not possible to use my required wpa password. only an wep-password was allowed. for security reasons i use a password with

  • Guide me  ABAP & mm

    Hi Every one, Presently i am working as abaper since 2 years, now i am plaining to learn one functional module. But i don't have any domain experience. I worked in logistics as abaper(so i know MM,SD&PP). Shall i go for Netweaver like XI,EP,MDM,Webdy