I replaced my hard drive and used time machine to boot from but it installedthe unrepaired disk permissions of the faulty previous drive would this cause problems on my new drive?

I replaced my hard drive on macbook pro and used time machine to boot from but it also installed the unrepaired disk permmissions of the other drive, would this cause problems to my new drive?

Can you remember what the permissions problem was that you had before? You may need to reinstall OS X from scratch and not reinstall anything from your Time Machine backups. To be on the safe side you should reinstall all third-party applications from scratch, as well. Then only restore from your backup your document/data files.

Similar Messages

Installing a new hard drive and using Time Machine to Restore system

I just upgraded a Macbook (2006) hard drive and had problems importing the Time Machine backup. The problem was that the initial install discs were for Tiger, which did not support Time Machine. After numerous attempts at a work-around I solved this problem the following way:
I connected the 2006 Macbook (with new hard drive) to a newer Macbook (with Firewire port) - one with install discs for Leopard (which supports Time Machine).
I launched the newer Macbook with the install disc (#1)
I connected the two Macbook via firewire cable.
I launched the 2006 (new hard drive) Macbook in the Target Disc mode.
I connected the USB external hard drive containing the Tme Machine data to a USB port in the newer Macbook.
Next I went to the Utilities Menu on the Macbook (operating from the Install Disc) and selected Time Machine. I followed the prompts to match the source and destination. The process worked fine.
The above assumes that a new hard drive is properly formatted using Disc Utility per Apple's guidance prior to the Time Machine restoration described above.
Cheers.
Bill

Bill,
No, the glass is half full!! In this case, we (collectively) have three things to brighten our day:
1) That I was mistaken, and that your usage is completely legitimate. I definitely prefer this to what was inherent in my erroneous assumption, and I do not mind being wrong (not in the slightest).
2) That we can be clever enough to overcome obstacles, then go out of our way to share our newfound knowledge with others. More specifically, that you have done so.
3) That we are willing to police ourselves, if and when one of us might go astray. Even if I was wrong in this case, isn't it nice to know I am willing scold someone for being less than honorable?
Perhaps my greatest mistake was the assumption that, if you had the proper disks at one time, you would still have them, or would have said so in your initial post. My apologies. Technically speaking, the media for a given OS should always be somewhere in your possession when running that OS. In practice, however, I strongly believe that some "wiggle room" exists, guided by common sense. In this case, I believe that the fact that you purchased said media gives you a pass, regardless of whether or not you know off the top of your head where it is.
There. Are you still saddened?
Scott

I recently took my imac in for a recall on the hard drive, they replaced my hard drive, i used time machine to restore all my files. Now when I turn time machine on it says back up failed not enough space, it is not overwriting old back ups.

I recently took my imac in for a recall on the hard drive, they replaced my hard drive, i used time machine to restore all my files. Now when I turn time machine on it says back up failed not enough space, it is not overwriting old back ups. Why? Please help

http://pondini.org/TM/FAQ.html

Is their another way like to use my time capsule as an external drive not using time machine?thanks

is their another way like to use my time capsule as an external drive not using time machine?thanks

You do not have to use Time Machine.. but the TC is hardly suitable for a NAS.. it has no means to back itself up and is relatively slow. Still that is up to you..
CCC or Superduper are good backup softwares .. and there are a number of others.

SPECS FOR NEW MBP HARD DRIVE AND HOW TO INSTALL NEW OS AND USE TIME MACHINE

I need to replace the hard drive in my early-2006 1.83 MacBook Pro (15-inch), because the Genius at the Apple Store told me that I'm getting weird behavior on it due to the drive slowing down and that it won't last much longer.
I have 2 questions:
First, I want to order the drive online and have it installed locally. I will probably get a 320 to 500GB drive. What are the exact other specs I will need to find the right one?
Second, I am currently running 10.5.8 and backing up with Time Machine. I would like to install 10. 6 on the new drive, but don't know how to go about using the Time Machine backup to get all my apps and files running. Can someone describe this procedure for me?
Many thanks!

Hi Annie,
You need a 2.5" 9.5mm high SATA HD, either 5400 or 7200RPM. Check out macsales, newegg, amazon to name a few places.
How to restore from a TM backup: http://support.apple.com/kb/ht1427
Prepare your HD by formatting and partitioning it:
1. Boot from install disc (press power button, immediately insert install disc and hold down c key).
2. Select your language.
3. Open Disk Utility from Utilities menu.
4. Select the HD in the left pane (the manufacturer’s name and the HD model number).
5. Click on the Erase tab.
6. Choose the Format: Mac OS Extended (Journaled).
NOTE: if you want to zero the HD (which I always think is a good idea, but does take time), click on Security Options, click the button for Zero Out Data, click OK. The larger the HD, the longer this will take, in some cases several hours.
7. Click on Erase and wait for the entire process to finish.
8. Click the Partition tab.
9. Click on Volume Scheme: and choose the number of partitions (normally just one unless you have other plans).
10. Click on the Options button (located underneath the Volume Scheme pane) and select GUID.
11. Click Apply.
12. Quit Disk Utility and continue with the installation process to install OSX or run Restore from a TM backup; when finished, repair permissions, run updates, repair permissions.
Message was edited by: tjk

I replaced my MacBook Pro hard drive and now Time Machine is very slow.

I replaced my 160G Hard Drive with a 750G. I have a 3 TB external hard drive for Time Machine. I back up using firewire 800.
I am running the latest OS. When I start the first backup using Time Machine it goes fine for about the first 30G. Then slows way down. Now I am only seeing updates of 10M ever few minutes. What is wrong?

Nothing is wrong. I had the same issue after swapping HD but using the same TM backup. Give it a few hours to do the first backup. Subsequent backups will be alot faster.... trust me.

I have WD 1TB and use Time Machine for the past 2 years. Now I have multiple folders in my external hard drive and want to know how to condense all folders into yearly folders instead. Anyone know how to do this?

Now I have multiple folders in my external hard drive and want to know how to condense all folders into yearly folders instead. Anyone know how to do this?

anthonycancel wrote:
I want the folders I already backed up to come together into one folder when that year is over. Is there a way to manually do that or automatic through TM?
I'm quite sure there is no "automatic" way to do this. I've never heard of anyone trying it either. I suppose if you wanted try it, you could simply create a new folder in the same partition TM is on, label it for that year, then gather all the days for that year and drag/drop them into the folder. I suspect (but do not know) you'd be risking the continuity of your backups, meaning TM would simply start over again, meaning that next back up would start a new series of backups, with the first one roughly equalling the entire capacity of your internal HD, instead of adding only the new data to the previous backup. Once again, I would recommend against it, unless you're fine with TM starting a new series of backups if it doesn't work out the way you want it to. Hope you'll post back with results so we can learn from it.

Problems reading my backed up data on hard drive after using Time Machine

I have a MacBookPro and had to take it in for servicing. I backed up all my data using Time machine. They had to replace my battery, hard drive, and logic board, basically wiping my slate clean. When I got my computer back and plugged in my hard drive time machine came up asking if I wanted to restore a back up. I chose the drive. Then that drive disappeared from the desktop and changed the disk name from "BACKUP" to "disk1s4" and is unreadable. Cannot get anything off the hard drive.
Any idea how I can read my data off my hard drive. I have 3+ years of pictures of my 2 kids and all my music. The rest I could take or leave. But I would be devastated to lose my pictures.
Please help
Thank you
Message was edited by: Jlk51496
Message was edited by: Jlk51496

Jlk51496 wrote:
When I got my computer back and plugged in my hard drive time machine came up asking if I wanted to restore a back up.
Hi, and welcome to the forums.
Do you mean this window?
or this one?
They are very different, obviously.
Try repairing the drive, per #A5 in [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of this forum).
Why was your Mac seviced? What did they replace?

Upgrading hard drive and OS - time machine suitable?

I've been keeping regular copies of my system using time machine, but am not sure of it's overall capabilities. I am about to replace my internal hard drive (2008 macbook) and upgrade to Snow Leopard. Once this is done can I simply restore my old settings, applications, and files using time machine? Would this also include things such as my .profile file?
Also if anyone has any advice on a good replacement hard drive then that would be super. I have the late 2008 aluminium macbook, and need something bigger than the current 230GB. I'm off to do some research now, but it can't hurt to ask here too.
Thanks for the help,
Nick

Yes, the Momentus is a good drive.....You shouldn't have any issues with that one...
I myself purchased a Seagate Momentus 5400RPM hard drive and used it for a few months until I got a nice deal on a 128GB Kingston V200 SSD.....
Now I'm enjoying a quick Macbook Uni with 8GB of RAM and SSD upgrade. Planning on giving it to my niece since I have a couple of late 2011 Macbook Pros.
Good luck

How do I read/open an external hard drive after using time machine?

I have an external Seagate HD that I used to back up files using Time Machine. How do I now read/open/view the Seagate External Hard Drive to see all that was saved for example documents, photos etc?

probe_droid wrote:
TimeMachine does an exact copy of the hardrive that you backed-up.
Not exactly, but close. It doesn't duplicate files and folders that haven't changed. It creates hard links to the originals so that it looks as if they are in the current dated folders, but they really aren't. I think this even throws off the Finder, sometimes. That's why digging through the Time Machine backup via the Finder is not a good idea and will likely cause more consternation.
Pondini has a nice FAQ and troublshooting site devoted to Time Machine. It is well worth everyone's time to take a look at what he has compiled. On the troubleshooting page are links to some tools that will allow you to peek into the backup and see what has or hasn't been backed up.

Using toshiba canvio hard drive without using time machine

Has anyone used the Toshiba Canvio external hard drive to save files to without using time machine? I want to move files off of my computer onto the external drive not just duplicate all the files on my computer as a backup.

I guess the external drive is hanging off the Mac..
Getting access to the drive from PC should be possible.. you may need to move public directory onto the external drive and then set up permissions to do it.. I have not done it and simply would not do it.
External hdd are cheap enough buy one for the pc.. That is then formatted NTFS which windows is going to natively read.. this will be much easier if the backups are ever required than to use HFS+ formatted disk hanging off the Mac.
You can also get your dead TC fixed.
https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem s/apple-time-capsule-repairers

Cannot install Mountain Lion as the installer provides message that my target drive is using Time Machine. My target drive is my internal drive and I use an external drive for Time Machine. When I check the Time Macine set up under system prefereces it sh

Cannot install Mountain Lion as installer sys the target drive I have selected is using Time Machine. The target drive I selected is my internal drive. I have an external drive that I use for Time Machine backup. When I go to System Preferences and look at the Time Machine set up it shows my target disk is the external drive. What to do?

Yes, you’ll be able to do that.
(116841)

Installing a new harddrive and using time machine to restore old files

I want to replace the old 250 gig harddrive on my Macbook pro with a new 750 gig one I just purchased. I have made backups with time machine and have heard that after you install Snow leopard on the new drive you can just create your old computer with all the files back in place with the time machine backup you made from the previous drive. Im sure plenty of you have done this I am just wondering how it went and some tips of how to not mess this up. One question I have is do I need to do all the Snow Leopard updates for the system (I think my disc is 10.6.4) , or iTunes,quicktime etc, or will that all be resolved with the time machine restore. Same goes with iLife, should I install iLife first or will that come over with the time machine restore. I think im thinking into this too much but just not sure how this all works. Thanks for your help!

Prepare your new drive:
Drive Preparation
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
7. When completed quit DU and return to the installer. You will have an option appear to restore from a TM backup. You can select that option or you can complete the installation of OS X. Upon completion of the Setup Assistant you can opt to restore from an external drive or a TM backup.
Be sure your TM backup drive is connected and powered up. If all else fails you can always finish the installation and the reboot, then restore from your TM backup using Migration Assistant.

Complicated corrupted main drive and lost Time Machine back-ups question

Here's tough one I can't pin down answers to: I have an iMac Early 2008 running Lion. The main hard drive system (probably) corrupted over the course of 2-3 months until it became unusable. I had Sophos on it, but removed it about a month ago and reliability improved but only for about a week. Finally the hard drive crashed. I used the Recovery partition while able to have Disk Utility add a second partition to my back-up drive, which contains Time Machine back-ups, my iPhoto folder and a few other files but no system. I installed Snow Leopard from disk to the new partition, checked the first partition, which seemed fine, then upgraded the Snow Leopard partition to Lion and updated and ran under a temporary user. Next I explored the main drive, which Disk Utility said was fine, but doesn't always show up. While in Disk Utility, I noticed that the first partition on the back-up drive showed up as empty! After some panicking, I've a second back-up drive on the way, but how do I access the TIme Machine back-ups, get my original user back and get access to over 15 years of files that are locked into that user?
My (2nd) back-up drive arrives tomorrow, so I'll able to get to work soon.
Thanks for any help.

Ok so wahat you mean is I need to name a partition "Time machine" in order for TM to back up any volumes and TM will always start with the volume titled Timemachine ?
so as I stated
A. All my OS applications _________Rename this to time machine or can I ues the volume name it is now?
B. All my files for those applications ---------Once that is done TM will back this up?
C. All My Itunes / Music etc---------Once that is done TM will back this u last?
Also I did a test run and I geet the error msg that the backup disk of my OS needs 1.36 TB but only 1.34 exists. The orignal OS disk has only 232GB of data why is tome machine asking for all that space?
I set the partition at 1.34 so there would be way more than enough space to copy.
R

To Clone and use Time Machine

I’m running 10.6.8 and 10.9.2 on my iMac. My backup for 10.6.8 is close to being full and I want a second one to be on the safe side having one die on me a while back. I haven’t backed up 10.9.2 as yet. Can I clone both and then use Time Machine backups in the same partitions as the clones or should I have a separate partition for each clone and each Time Machine backup? My external will be a 1 TB LaCie and I’m sure there’ll be enough room for what I do.
Also, I saw some discussion about Time Machine in Mavericks not spinning down when using Firewire 800, so my 2nd question is if I eject my backup and then just disconnect it will it screw things up or would it be better to power down my hard drive before doing so?
Thanks,

I replaced my hard drive and used time machine to boot from but it installedthe unrepaired disk permissions of the faulty previous drive would this cause problems on my new drive?

Similar Messages

Maybe you are looking for