File creation problems

Hi,
I'm pretty new at writing extensions so I'm quite certain my
problem is a mistake on my part.
I've written a piece of code that takes a data file and
formats it into a table and writes the table to a new file (the
client doesn't want to use templates, that's why it's done this
way).
The data file is formatted with the first line as the page
title, the second line has the column names and the rest is the
data. The data if formatted with ";"
The function doStuff calls the fixTag function.
Whenever I run this, the contents of the data file (opened
with fh = dreamweaver.openDocument(theFile); in the fixTag
function) receives the data I try to write to the new file (created
with var newTableDoc = dreamweaver.createXHTMLDocument(); in the
doStuff function).
What am I doing wrong here. I've tried using
dreamweaver.releaseDocument to release the data file, but it
doesn't help. I've tried creating the new file with
dreamweaver.getNewDocumentDOM but can't figure out how to then save
that without running into the same overwrite problem.
Any help, tips, and the like is greatly appreciated.
Problem code is attached.

Found the solution. Was my poor coding.
I just need to have
dreamweaver.createXHTMLDocument();
newTableDoc=dreamweaver.getActiveWindow();
newTableDoc.getElementsByTagName("body")[0].innerHTML =
rString;
hope this helps someone else.
Cheers.

Similar Messages

  • Jar file creation problem

    I have create the jar file, but it show the following error mesage since i start to run it.
    Java Virtual Machine Laugcher
    Failed to load the main class manifest attribute from
    E:\j2sdk1.4.2\bin\test.jar
    What the problem for this?
    my manifest.mf file contain the information
    Manifest-Version: 1.0
    Main-Class: mysystem.MainFrame
    note, my directory is javac mysystem/MainFrame.java to run

    Open the jar in WinZip (or any other).
    the mysystem directory should be in the root..

  • Batch File Creation Problem CS5.5

    I am having an issue creating aep files on our farm using aerender in CS5.5.  We have a script that uses a template aep to generate a new file for various shots.  It works fine in CS4.  When I use the same script in CS5.5 it creates a file, but when you try to open it, it gives the following messages:
    After Effects warning: Reading past end of file
    After Effects error: strange situation [0/2].  (26 :: 84)
    At which point AE either crashes or leaves a blank file.
    However, if you try to import the same file, it works fine and everything appears as desired.
    If I run the same script through the CS5.5 UI (AfterFX.exe as opposed to aerender.exe) the file generated opens without issue.
    I also tried stripping out parts of the script to see if removing elements fixed the issue.  It did not - in fact I made a new script to try in batch mode that only saves a file.  This results in the the same
    After Effects warning: Reading past end of file
    but no errors, though I imagine that's because it's a blank project to begin with. 
    Here is the code for that script:
    function testBuild() {
        var saveMe = new File("//server/job/comp/dev/work/test/shot/file_test.aep");
        app.project.save(saveMe);
    We are using a slightly modified version of commandLineRenderer.jsx that allows extra flags to run pre-render scripts and submit without rendering.  I merged our custom edits with the version that ships with CS5.5 to ensure continuity.  Again, the script works in CS4 (even w/ the updated custom CS5.5 version of the commandLineRenderer.jsx).
    Here's the command that runs on the farm:
    aerender -s 1 -e 1  -norender -script //server/job/bin/dev/testBuild.jsx -command "testBuild()"  2>&1
    the -norender -script and -command flags were things we added to commandLineRenderer.jsx, -norender indicates not to render the project, -script gives the script to load and -command the command to run.
    The issue seems directly related to saving using aerender.exe in CS5.5 since everyting works correctly in CS4 and in the CS5.5 UI
    We are running Windows 7 64-bit.
    Thanks for any help you can provide!

    Hi Johny,
    I forgot to come back to this thread, sorry.
    So it seems that the save file in noui batch do not complete his job, in fact, when you save your file in aepx (xml file) you could see the change between a NOUI file and an UI file, there is 3 lines missing, near the end :
    </Fold>
    <wsns bdata="XXXX"/>
    <wsnm bdata="XXXXXXXX"/>
    <string>Standard</string>
    <fcid bdata="XXXXX"/>
    <LSIf>
    If you add those three line in your .aepx (at the right place) you can open your file in Ae without any problem (I do not know what it refers too and you should get your own figures, in place of XXX).
    Moreover, I tried too to contact adobe support, but even if you suceed to reach them, they will tell you that the problem come from your script, even if it's quite obvious that the save option for noui do not complete his job.
    Hope it will help you and other members,
    Best Regards.

  • XML File Creation Problem in FTP Server

    Hi.. Experts
    My Internal Table is as follows
    Types: Begin of ty_xmlfile,
             xmlline(60000)        type C,
           End of ty_xmlfile.
    Data: it_xmlfile type standard table of ty_xmlfile,
            wa_xmlfile type ty_xmlfile.
    When I download the file to my desktop using  GUI_DOWNLOAD. It works fine
    CALL FUNCTION 'GUI_DOWNLOAD'
              EXPORTING
                BIN_FILESIZE = lv_size
                FILENAME     = lv_file_name
                FILETYPE     = 'ASC'
              TABLES
                DATA_TAB     = it_xmlfile
              EXCEPTIONS
                OTHERS       = 10.
            IF SY-SUBRC <> 0.
              MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
            ENDIF.
    In the debug mode when I download the internal table(IT_XMLFILE) into an excel file it doesn't open and it says tag is missinig(/basic_material_text) and also when I create the file in Application Server and transfer it to FTP Server it doesn't open there..and also in debug mode I find the length until  DIMENSION AN.. for that row when I double click on that line in debug mode it shows all the text until </baisc_material_Text>
    <basic_material_text>4.500 +.000/-.010 O.D. X 213.0&quot; LG.(F)                      (A)ASTM A276 CONDITION &quot;A&quot; 317LTYPICAL MILL CERTS REQ&apos;D.DIMENSION REFERENCE:(A) = ALLOWANCE IS INCLUDED FOR MACHINING(F) = THIS IS A FINISHED DIMENSION AN*
    The above statement is incomplete when the file is open in FTP Server.
    But when the file is created on to my desktop. It displays all the text....
    <basic_material_text>4.500 +.000/-.010 O.D. X 213.0" LG.(F) (A)ASTM A276 CONDITION "A" 317LTYPICAL MILL CERTS REQ'D.DIMENSION REFERENCE:(A) = ALLOWANCE IS INCLUDED FOR MACHINING(F) = THIS IS A FINISHED DIMENSION AND WILL BE USED AS RECEIVED(T) = TO FINISH TO THIS DIMENSION FOR FORGING AND BILLET MATERIAL ONLYVENDOR TO SUPPLY THE FOLLOWING ENGINEERING/QUALITY ASSURANCE DATATYPICAL MILL TEST CERTIFICATES/CERTIFICATES MUST ACCOMPANY THE MATERIAL.* COPIES REQUIRED:(2)ALL CERTIFICATES MUST HAVE LIGHTNIN PART NO.CLEARLY MARKED ON THEM.* COPIES REQUIRED:(2)</basic_material_text> *
    I could not understand why it takes only until DIMENSION AN
    Any suggestions would be very helpful...
    Thanks,
    Chaitanya
    -Points will be awarded for helpful answers.

    Hi...
    I think each XML Line will be of length 256. So I have to split the String into 256 of each Line.
    XML DOM Processing in ABAP part I -  Convert an ABAP table into XML file using SAP DOM Approach.
    Hope  it works out....I will try for that and Close the Post...
    Thanks,
    chaitanya K

  • File sharing problem - prevent directory creation

    Under one of my share points, I'm trying to create a folder in which users in a specific group can read and write files but cannot create new folders. I didn't see any way of doing this with the standard POSIX permission sets, so I tried ACL
    I opened up Server Admin, and added an ACL entry for that folder that enabled the group in question to have full Read permissions, and only file creation permissions. I saved the changes, checked to make sure the volume (it's actually my boot volume, but this is just to see if it works) had ACL enabled.
    If a user in that group logs in through AFP, and attempts to copy a file over, they are denied access (Bad!). If they try to create a folder they are denied access (Good!). But on a whole it just seems as if write permissions altogether aren't there. In any case, the ACL permission set doesn't seem to be working. Does anyone have any suggestions?
    I'm running a fresh install of OS X Server 10.5.6 on a brand new X-Serve.

    Just as an update I tried this with SMB and everything is working as it should. It's just AFP that's giving me trouble right now.

  • How can I change the file creation date?

    I recently downloaded more than 1,000 photos from my vacation. I'm preparing to burn DVDs for a friend, and I noticed that when I copy the photos to the desktop, they don't all have the same date. I have read a couple of discussions here about the difference between photo creation date and file creation date, and I understand the difference. But something seems odd to me.
    For purposes of illustration, let's take two photos: "A" was taken with the camera in the landscape position (how one normally holds a point-and-shoot); "B" was taken with the camera held in the portrait position (rotated 90 degrees). The photos were taken on April 24, about three minutes apart, but not imported into iPhoto until May 19.
    In iPhoto, both files show the actual creation date. Yay!
    The problem is with the files after having been copied to the desktop.
    When copied to the desktop, the info panel for photo "A" shows April 24 for both the "created" and "modified" dates. Photo "B," however, shows May 19 for the "created" and "modified" dates.
    Apparently, when the "B-style" photos were imported into iPhoto, the app automatically rotated them so that they are viewed correctly (without having to turn your head sideways). This is a very nice feature, but the result is that the file date changes.
    Is there any way to change this? I want the DVD to show the date the photo was created, not imported to iPhoto. Picky, I know … but I'm like that. 

    Apparently, when the "B-style" photos were imported into iPhoto, the app automatically rotated them so that they are viewed correctly (without having to turn your head sideways). This is a very nice feature, but the result is that the file date changes.
    Correct.  Your camera has an Auto-Rotate feature. However, the camera does not actually rotate any pixels in the file, but instead flags it with an instruction: "Display me this way". This is a tag in the Exif metadata. When you import a file with this tag iPhoto creates a modified version. It does this because most of the apps that integrate with it -  email clients, word processors etc - simply don't understand this Exif tag. So if you used the shot in a word processing doc, uploaded it to many Web site etc, the shot would come out sideways.
    iPhoto has nothing to say about File dates. There are various file utilities that will edit the dates on Files
    http://www.macupdate.com/app/mac/11143/a-better-finder-attributes
    for instance. But there are otheers, search on  MacUpdate
    Regards
    TD

  • RC-50004: Fatal: Error occurred in ApplyDatabase: Control file creation fai

    Hi guys,
    I am cloning and EBS 12.1.3 from one server to another, and when Configuring the target system database server with ''perl adcfgclone.pl dbTier'', I am getting the following error:
    RC-50004: Fatal: Error occurred in ApplyDatabase:
    Control file creation failed
    MOS is saying that it is due to wrong permissions on the /var/tmp/.oracle directory and we should give it the following permissions:
    chmod 777 /var/tmp/.oracle
    After giving those permissions and rebooting the server , and running the perl adcfgclone.pl dbTier script, I am still having the same problem:
    RC-50004: Fatal: Error occurred in ApplyDatabase:
    Control file creation failed
    This is the contents of the ApplyDBTier log file (since the file exceed 30.000 characters, i am going to post the parts where the errors occur:
    [oratest@DLAERPSRV01 ERP_DLAERPSRV01]$ cat ApplyDBTier_05021530.log
    Started ApplyDBTier at Thu May 02 15:30:44 WAT 2013
    Version:
    ApplyDBTier.java : 120.6.12010000.3
    ApplyDBTier (prog) -1 true true true...
    # Calling ApplyDBTechStack...
    Executing runInstallDriver...
    Started unzipping files...
    Completed runInstallDriver.
    Executing home registration for s_db_oh...
    instantiate file:
    source : /u02/oratest/db/tech_st/11.1.0/appsutil/template/adouidb.pl
    dest : /u02/oratest/db/tech_st/11.1.0/appsutil/clone/ouicli.pl
    backup : /u02/oratest/db/tech_st/11.1.0/appsutil/clone/ouicli.pl to /u02/oratest/db/tech_st/11.1.0/appsutil/out/ouicli20.pl
    setting permissions: 700
    setting ownership: oratest:dba
    instantiate file:
    source : /u02/oratest/db/tech_st/11.1.0/appsutil/template/config_ux.tmp
    dest : /u02/oratest/db/tech_st/11.1.0/rdbms/lib/config.c
    backup : /u02/oratest/db/tech_st/11.1.0/rdbms/lib/config.c to /u02/oratest/db/tech_st/11.1.0/appsutil/out/config21.c
    setting permissions: 700
    setting ownership: oratest:dba
    instantiate file:
    source : /u02/oratest/db/tech_st/11.1.0/appsutil/template/adlnkoh.sh
    dest : /u02/oratest/db/tech_st/11.1.0/appsutil/clone/adlnkoh.sh
    backup : /u02/oratest/db/tech_st/11.1.0/appsutil/clone/adlnkoh.sh to /u02/oratest/db/tech_st/11.1.0/appsutil/out/adlnkoh20.sh
    setting permissions: 700
    setting ownership: oratest:dba
    Executing script in InstantiateFile:
    /u02/oratest/db/tech_st/11.1.0/perl/bin/perl -I /u02/oratest/db/tech_st/11.1.0/perl/lib/5.8.3 -I /u02/oratest/db/tech_st/11.1.0/perl/lib/site_perl/5.8.3 -I /u02/oratest/db/tech_st/11.1.0/appsutil/perl /u02/oratest/db/tech_st/11.1.0/appsutil/clone/ouicli.pl
    script returned:
    Beginning OUI CLI cloning for s_db_ohThu May 2 15:30:46 2013
    /u02/oratest/db/tech_st/11.1.0/appsutil/jre/bin/java -classpath /u02/oratest/db/tech_st/11.1.0/appsutil/java:/u02/oratest/db/tech_st/11.1.0/oui/jlib/OraInstaller.jar:/u02/oratest/db/tech_st/11.1.0/appsutil/java/xmlparserv2.jar oracle.apps.ad.clone.util.OracleHomeCloner -OUICLI -e /u02/oratest/db/tech_st/11.1.0/appsutil/ERP_DLAERPSRV01.xml -nolink -oaVar s_db_oh -homestub db -log /u02/oratest/db/tech_st/11.1.0/appsutil/log/ERP_DLAERPSRV01/ohclone.log
    Running OUI CLI home cloning from within OracleHomeCloner:
    /u02/oratest/db/tech_st/11.1.0/oui/bin/runInstaller -clone -silent -force -nolink -waitForCompletion -invPtrLoc /u02/oratest/db/tech_st/11.1.0/admin/oui/ERP_DLAERPSRV01/oraInst.loc ORACLE_HOME=/u02/oratest/db/tech_st/11.1.0 ORACLE_BASE=/u02/oratest/db/tech_st/11.1.0 ORACLE_HOME_NAME=ERP_DB__u02_oratest_db_tech_st_11_1_0 -J-Doracle.installer.noLink=true
    Finished OUI CLI cloning for s_db_oh with return code: 0Thu May 2 15:30:56 2013
    Executing script in InstantiateFile:
    /u02/oratest/db/tech_st/11.1.0/appsutil/clone/adlnkoh.sh
    script returned:
    adlnkoh.sh started at Thu May 2 15:30:56 WAT 2013
    Log file located at /u02/oratest/db/tech_st/11.1.0/appsutil/log/ERP_DLAERPSRV01/make_05021530.log
    Using make file "ins_emagent.mk" for linking SYSMAN utilities...
    Error while running adlnkoh.sh.
    return code = .16
    Please check logfile located at /u02/oratest/db/tech_st/11.1.0/appsutil/log/ERP_DLAERPSRV01/make_05021530.log
    .end std out.
    .end err out.
    Executing Technology Stack Configuration...
    Executing runAutoConfig...
    Deleting files of type INSTALL
    Checking for file: /u02/oratest/db/tech_st/11.1.0/network/admin/ERP_DLAERPSRV01/sqlnet.ora
    Processing driver file: /u02/oratest/db/tech_st/11.1.0/appsutil/template/addbtmpl.drv
    Checking for file: /u02/oratest/db/tech_st/11.1.0/appsutil/install/ERP_DLAERPSRV01/txkConfigDbOcm.pl
    File exists
    File deleted
    Checking for file: /u02/oratest/db/tech_st/11.1.0/dbs/initERP.ora
    File exists
    File deleted
    Checking for file: /u02/oratest/db/tech_st/11.1.0/network/admin/ERP_DLAERPSRV01/listener.ora
    File exists
    File deleted
    Checking for file: /u02/oratest/db/tech_st/11.1.0/network/admin/ERP_DLAERPSRV01/tnsnames.ora
    File exists
    File deleted
    Testing for RAC specific parameters before running autoconfig
    No RAC specific parameters were found, running with CVM
    Starting CVM in INSTE8_SETUP mode
    Using Context file : /u02/oratest/db/tech_st/11.1.0/appsutil/ERP_DLAERPSRV01.xml
    Attempting to create a back up of the Context file
    Created back up file of name :
    /u02/oratest/db/tech_st/11.1.0/appsutil/out/ERP_DLAERPSRV01/05021531/ERP_DLAERPSRV01.xml
    ===========================================================================
    Starting synchronization of file system Context file and its templates with those in the database
    Database connection : Failed
    OAM Context editing support feature: Unverified
    OAM Customization support feature : Unverified
    File system template : /u02/oratest/db/tech_st/11.1.0/appsutil/template/adxdbctx.tmp
    Checking for customizations to Context template
    Warning: Unable to connect to Database.
    If the system is OAM enabled, this may result in loss of customizations.
    Looking for custom template at : /u02/oratest/db/tech_st/11.1.0/appsutil/template/custom/adxdbctx.tmp
    Custom template : Not Available
    Customizations found : None
    File system Context file :/u02/oratest/db/tech_st/11.1.0/appsutil/ERP_DLAERPSRV01.xml
    Checking the Context file for possible updates from the Database
    Warning: Unable to connect to Database.
    If the system is OAM enabled, this may result in loss of customizations and the Context files in DataBase and in the file system may be unsynchronized
    ===========================================================================
    Starting Updates of Context file Thu May 02 15:31:44 WAT 2013
    found context version : 120.34.12010000.14
    available update version : 120.34.12010000.14
    No updates to apply
    Starting DB listener with command:
    /u02/oratest/db/tech_st/11.1.0/appsutil/scripts/ERP_DLAERPSRV01/addlnctl.sh start ERP
    Logfile: /u02/oratest/db/tech_st/11.1.0/appsutil/log/ERP_DLAERPSRV01/addlnctl.txt
    You are running addlnctl.sh version 120.1.12010000.4
    Starting listener process ERP ...
    LSNRCTL for Linux: Version 11.1.0.7.0 - Production on 02-MAY-2013 15:32:23
    Copyright (c) 1991, 2008, Oracle. All rights reserved.
    Starting /u02/oratest/db/tech_st/11.1.0/bin/tnslsnr: please wait...
    TNSLSNR for Linux: Version 11.1.0.7.0 - Production
    System parameter file is /u02/oratest/db/tech_st/11.1.0/network/admin/ERP_DLAERPSRV01/listener.ora
    Log messages written to /u02/oratest/db/tech_st/11.1.0/admin/ERP_DLAERPSRV01/diag/tnslsnr/DLAERPSRV01/erp/alert/log.xml
    Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DLAERPSRV01.camairco.local)(PORT=1523)))
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=DLAERPSRV01.camairco.local)(PORT=1523)))
    STATUS of the LISTENER
    Alias ERP
    Version TNSLSNR for Linux: Version 11.1.0.7.0 - Production
    Start Date 02-MAY-2013 15:32:23
    Uptime 0 days 0 hr. 0 min. 0 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File /u02/oratest/db/tech_st/11.1.0/network/admin/ERP_DLAERPSRV01/listener.ora
    Listener Log File /u02/oratest/db/tech_st/11.1.0/admin/ERP_DLAERPSRV01/diag/tnslsnr/DLAERPSRV01/erp/alert/log.xml
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DLAERPSRV01.camairco.local)(PORT=1523)))
    Services Summary...
    Service "ERP" has 1 instance(s).
    Instance "ERP", status UNKNOWN, has 1 handler(s) for this service...
    The command completed successfully
    addlnctl.sh: exiting with status 0
    addlnctl.sh: check the logfile /u02/oratest/db/tech_st/11.1.0/appsutil/log/ERP_DLAERPSRV01/addlnctl.txt for more information ...
    .end std out.
    .end err out.
    checking DB Connection...
    DEBUG: checkDBConnection in()
    ADX Database Utility
    getConnection() -->
    sDbHost : DLAERPSRV01
    sDbDomain : camairco.local
    sDbPort : 1523
    sDbSid : ERP
    sDbUser : apps
    Trying to connect using SID...
    getConnectionUsingSID() -->
    JDBC URL: jdbc:oracle:thin:@DLAERPSRV01.camairco.local:1523:ERP
    Exception occurred: java.sql.SQLRecoverableException: ORA-01034: ORACLE not available
    ORA-27101: shared memory realm does not exist
    Linux-x86_64 Error: 2: No such file or directory
    Trying to connect using SID as ServiceName
    getConnectionUsingServiceName() -->
    JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DLAERPSRV01.camairco.local)(PORT=1523))(CONNECT_DATA=(SERVICE_NAME=ERP)))
    Exception occurred: java.sql.SQLRecoverableException: ORA-01034: ORACLE not available
    ORA-27101: shared memory realm does not exist
    Linux-x86_64 Error: 2: No such file or directory
    Trying to connect using SID as ServiceName.DomainName
    getConnectionUsingServiceName() -->
    JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DLAERPSRV01.camairco.local)(PORT=1523))(CONNECT_DATA=(SERVICE_NAME=ERP.camairco.local)))
    Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
    ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
    Connection could not be obtained; returning null
    -------------------ADX Database Utility Finished---------------
    DEBUG: checkDBConnection out()
    Skipping Profile Phase
    Skipping Apply Phase
    Executing CreateDB...
    ADX Database Utility
    getConnectionUsingAppsJDBCConnector() -->
    APPS_JDBC_URL='null'
    Trying to get connection using SID based connect descriptor
    getConnection() -->
    sDbHost : DLAERPSRV01
    sDbDomain : camairco.local
    sDbPort : 1523
    sDbSid : ERP
    sDbUser : apps
    Trying to connect using SID...
    getConnectionUsingSID() -->
    JDBC URL: jdbc:oracle:thin:@DLAERPSRV01.camairco.local:1523:ERP
    Exception occurred: java.sql.SQLRecoverableException: ORA-01034: ORACLE not available
    ORA-27101: shared memory realm does not exist
    Linux-x86_64 Error: 2: No such file or directory
    Trying to connect using SID as ServiceName
    getConnectionUsingServiceName() -->
    JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DLAERPSRV01.camairco.local)(PORT=1523))(CONNECT_DATA=(SERVICE_NAME=ERP)))
    Exception occurred: java.sql.SQLRecoverableException: ORA-01034: ORACLE not available
    ORA-27101: shared memory realm does not exist
    Linux-x86_64 Error: 2: No such file or directory
    Trying to connect using SID as ServiceName.DomainName
    getConnectionUsingServiceName() -->
    JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DLAERPSRV01.camairco.local)(PORT=1523))(CONNECT_DATA=(SERVICE_NAME=ERP.camairco.local)))
    Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
    ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
    Connection could not be obtained; returning null
    -------------------ADX Database Utility Finished---------------
    adcrdb.sh started at Thu May 2 15:32:40 WAT 2013
    The environment settings are as follows ...
    ORACLE_HOME : /u02/oratest/db/tech_st/11.1.0
    ORACLE_SID : ERP
    TWO_TASK :
    PATH : /u02/oratest/db/tech_st/11.1.0/perl/bin:/u02/oratest/db/tech_st/11.1.0/bin:/usr/bin:/usr/sbin:/u02/oratest/db/tech_st/11.1.0/appsutil/jre/bin:/bin:/usr/bin/X11:/usr/local/bin:/u02/oratest/db/tech_st/11.1.0/appsutil/clone/bin/../jre/bin:/u02/oratest/db/tech_st/11.1.0/appsutil/clone/bin/../jre/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/home/oratest/bin:.
    LD_LIBRARY_PATH : /u02/oratest/db/tech_st/11.1.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/u02/oratest/db/tech_st/11.1.0/lib:/usr/dt/lib:/u02/oratest/db/tech_st/11.1.0/ctx/lib
    Executable : /u02/oratest/db/tech_st/11.1.0/bin/sqlplus
    The log information will be written to
    /u02/oratest/db/tech_st/11.1.0/appsutil/log/ERP_DLAERPSRV01/adcrdb_ERP.txt
    Creating the control file for ERP_DLAERPSRV01 database ...
    SQL*Plus: Release 11.1.0.7.0 - Production on Thu May 2 15:32:40 2013
    Copyright (c) 1982, 2008, Oracle. All rights reserved.
    Connected to an idle instance.
    ORACLE instance shut down.
    Connected to an idle instance.
    ORA-27154: post/wait create failed
    ORA-27300: OS system dependent operation:semget failed with status: 22
    ORA-27301: OS failure message: Invalid argument
    ORA-27302: failure occurred at: sskgpbitsper
    CREATE CONTROLFILE REUSE SET DATABASE "ERP"
    ERROR at line 1:
    ORA-01034: ORACLE not available
    Process ID: 0
    Session ID: 0 Serial number: 0
    alter database open resetlogs
    ERROR at line 1:
    ORA-01034: ORACLE not available
    Process ID: 0
    Session ID: 0 Serial number: 0
    alter tablespace TEMP add tempfile '/u02/oratest/db/apps_st/data/temp01.dbf' REUSE
    ERROR at line 1:
    ORA-01034: ORACLE not available
    Process ID: 0
    Session ID: 0 Serial number: 0
    ALTER DATABASE RENAME GLOBAL_NAME TO "ERP.camairco.local"
    ERROR at line 1:
    ORA-01034: ORACLE not available
    Process ID: 0
    Session ID: 0 Serial number: 0
    ORA-01034: ORACLE not available
    ORA-27101: shared memory realm does not exist
    Linux-x86_64 Error: 2: No such file or directory
    Connected to an idle instance.
    ORA-27154: post/wait create failed
    ORA-27300: OS system dependent operation:semget failed with status: 22
    ORA-27301: OS failure message: Invalid argument
    ORA-27302: failure occurred at: sskgpbitsper
    BEGIN dbms_backup_restore.zeroDbid(0); END;
    ERROR at line 1:
    ORA-01034: ORACLE not available
    Process ID: 0
    Session ID: 0 Serial number: 0
    ORACLE instance shut down.
    Connected to an idle instance.
    ORA-27154: post/wait create failed
    ORA-27300: OS system dependent operation:semget failed with status: 22
    ORA-27301: OS failure message: Invalid argument
    ORA-27302: failure occurred at: sskgpbitsper
    CREATE CONTROLFILE REUSE SET DATABASE "ERP"
    ERROR at line 1:
    ORA-01034: ORACLE not available
    Process ID: 0
    Session ID: 0 Serial number: 0
    alter database open resetlogs
    ERROR at line 1:
    ORA-01034: ORACLE not available
    Process ID: 0
    Session ID: 0 Serial number: 0
    alter tablespace TEMP add tempfile '/u02/oratest/db/apps_st/data/temp01.dbf' REUSE
    ERROR at line 1:
    ORA-01034: ORACLE not available
    Process ID: 0
    Session ID: 0 Serial number: 0
    ALTER DATABASE RENAME GLOBAL_NAME TO "ERP.camairco.local"
    ERROR at line 1:
    ORA-01034: ORACLE not available
    Process ID: 0
    Session ID: 0 Serial number: 0
    declare lib_ver varchar2(3);
    ERROR at line 1:
    ORA-01034: ORACLE not available
    Process ID: 0
    Session ID: 0 Serial number: 0
    ERROR:
    ORA-01012: not logged on
    Process ID: 0
    Session ID: 0 Serial number: 0
    Disconnected
    exit_code=1
    Checking for errors ...
    The database has not been successfully created. Shutting down the instance ...
    SQL*Plus: Release 11.1.0.7.0 - Production on Thu May 2 15:32:42 2013
    Copyright (c) 1982, 2008, Oracle. All rights reserved.
    Connected to an idle instance.
    ORACLE instance shut down.
    Disconnected
    .end std out.
    .end err out.
    ADX Database Utility
    getConnectionUsingAppsJDBCConnector() -->
    APPS_JDBC_URL='null'
    Trying to get connection using SID based connect descriptor
    getConnection() -->
    sDbHost : DLAERPSRV01
    sDbDomain : camairco.local
    sDbPort : 1523
    sDbSid : ERP
    sDbUser : apps
    Trying to connect using SID...
    getConnectionUsingSID() -->
    JDBC URL: jdbc:oracle:thin:@DLAERPSRV01.camairco.local:1523:ERP
    Exception occurred: java.sql.SQLRecoverableException: ORA-01034: ORACLE not available
    ORA-27101: shared memory realm does not exist
    Linux-x86_64 Error: 2: No such file or directory
    Trying to connect using SID as ServiceName
    getConnectionUsingServiceName() -->
    JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DLAERPSRV01.camairco.local)(PORT=1523))(CONNECT_DATA=(SERVICE_NAME=ERP)))
    Exception occurred: java.sql.SQLRecoverableException: ORA-01034: ORACLE not available
    ORA-27101: shared memory realm does not exist
    Linux-x86_64 Error: 2: No such file or directory
    Trying to connect using SID as ServiceName.DomainName
    getConnectionUsingServiceName() -->
    JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DLAERPSRV01.camairco.local)(PORT=1523))(CONNECT_DATA=(SERVICE_NAME=ERP.camairco.local)))
    Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
    ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
    Connection could not be obtained; returning null
    -------------------ADX Database Utility Finished---------------
    RC-00118: Error occurred during creation of database
    Raised by oracle.apps.ad.clone.ApplyDatabase
    StackTrace:
    java.lang.Exception: Control file creation failed
    at oracle.apps.ad.clone.ApplyDatabase.doConf(ApplyDatabase.java:635)
    at oracle.apps.ad.clone.ApplyDatabase.doApply(ApplyDatabase.java:473)
    at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:366)
    at oracle.apps.ad.clone.ApplyDBTier.<init>(ApplyDBTier.java:110)
    at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
    at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
    at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
    at java.lang.reflect.Constructor.newInstance(Unknown Source)
    at oracle.apps.ad.clone.util.CloneProcessor.run(CloneProcessor.java:67)
    at java.lang.Thread.run(Unknown Source)
    [oratest@DLAERPSRV01 ERP_DLAERPSRV01]$
    Please guys, how can I solve this problem?

    @Hussain Sawwan
    Hi Hussain,
    After successfully configured the DbTier and AppsTier with their respective post clone scripts the appstier was automatically started at the end.
    But now, I can't seem to connect with my IE 9 and Firefow browsers.
    Link: http://dlaerpsrv01.camairco.local:8002/OA_HTML/
    Contents of the portpool.lst:
    ***** List of ports allocated based on port pool 2 *****
    Database Port : 1523 (EXT_PORT)
    RPC Port : 1628
    Web SSL Port : 4445
    ONS Local Port : 6102
    ONS Remote Port : 6202
    ONS Request Port : 6502
    Web Listener Port : 8002
    Active Web Port : 8002 (DUP_PORT)
    Forms Port : 9002
    Metrics Server Data Port : 9102
    Metrics Server Request Port : 9202
    JTF Fulfillment Server Port : 9302
    MSCA Server Port : 10212-10217
    MCSA Telnet Server Port : 10212,10214,10216 (DUP_PORT)
    MSCA Dispatcher Port : 10806
    Java Object Cache Port : 12347
    OC4J JMS Port Range for Oacore : 23010-23014
    OC4J JMS Port Range for Forms : 23510-23514
    OC4J JMS Port Range for Home : 24010-24014
    OC4J JMS Port Range for Oafm : 24510-24514
    OC4J JMS Port Range for Forms-c4ws : 26510-26514
    OC4J AJP Port Range for Oacore : 21510-21514
    OC4J AJP Port Range for Forms : 22010-22014
    OC4J AJP Port Range for Home : 22510-22514
    OC4J AJP Port Range for Oafm : 25010-25014
    OC4J AJP Port Range for Forms-c4ws : 26010-26014
    OC4J RMI Port Range for Oacore : 20010-20014
    OC4J RMI Port Range for Forms : 20510-20514
    OC4J RMI Port Range for Home : 21010-21014
    OC4J RMI Port Range for Oafm : 25510-25514
    OC4J RMI Port Range for Forms-c4ws : 27510-27514
    [root@DLAERPSRV01 appltest]#
    Entry in the /etc/hosts in my Win 7 Laptop:
    192.168.0.245 dlaerpsrv01.camairco.local dlaerpsrv01
    What could be the cause of this problem? It is unfortunate to reach at this point and not being able to connect.

  • Control file creation failed while installing ---------R12 release 3

    While installing R12 release 3 I am getting following error at the time of Step 2 0f 5
    RC-50004: Fatal: Error occurred in ApplyDatabase:
    Control file creation failed
    Cannot execute configure of database using RapidClone
    following is summery of my server hardware
    HDD capacity 146GB X 10 nos. ( RAID5 with 2 arrays)
    8 GB RAM
    Operating System is Red hat Linux Enterprise 4 with Update 5
    Following are the HDD partition details
    Boot 1GB
    Root 50GB
    Tem 12GB
    SWAP 24GB distributed on two HDD partitions equally
    Database and Application HDD portion size 500GB
    I am refering Metalink note Note 402310.1 all the setting are correct
    Following is kernel settings
    kernel.sem = 256 32000 100 142
    kernel.shmall = 2097152
    kernel.shmmax = 4294967296 ( Half the size of the physical memory is 8GB )
    kernel.shmmni = 4096
    kernel.msgmax = 8192
    kernel.msgmnb = 65536
    kernel.msgmni = 2878
    fs.file-max = 65536
    net.ipv4.ip_local_port_range = 1024 65000
    net.core.rmem_default = 262144
    net.core.rmem_max = 262144
    net.core.wmem_default = 262144
    net.core.wmem_max = 262144
    All the Pre-req.of installation are passing correctly
    •     glibc-2.3.4-2.25
    •     glibc-common-2.3.4-2.25
    •     binutils-2.15.92.0.2-21
    •     compat-libstdc++-296-2.96-132.7.2
    •     gcc-3.4.6-3
    •     gcc-c++-3.4.6-3
    •     libgcc-3.4.6-3
    •     libstdc++-3.4.6-3
    •     libstdc++-devel-3.4.6-3
    •     openmotif21-2.1.30-11.RHEL4.6**
    •     pdksh-5.2.14-30.3
    •     setarch-1.6-1
    •     make-3.80-6.EL4
    •     gnome-libs-1.4.1.2.90-44.1
    •     sysstat-5.0.5-11.rhel4
    •     compat-db-4.1.25-9
    •     control-center-2.8.0-12.rhel4.5
    •     xscreensaver-4.18-5.rhel4.11
    •     libaio-0.3.105-2
    •     libaio-devel-0.3.105-2
    these all packeges are avalable on the server some are even are the higher version because OS is with update 5
    Doen the installation 3 time with formating , but still facing same problem
    All Groups and Users and permitions are correct
    runProcess_3
    Statusstring Configuring Database
    Executing command: /stage/startCD/Disk1/rapidwiz/jre/Linux/1.5.0//bin/java -DCONTEXT_VALIDATED=true -mx512M -classpath /stage/startCD/Disk1/rapidwiz/jlib/java:/stage/startCD/Disk1/rapidwiz/jlib/xmlparserv2.jar:/stage/startCD/Disk1/rapidwiz/jlib/ojdbc14.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/OraInstaller.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/ewt3.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/share.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/srvm.jar oracle.apps.ad.clone.ApplyDatabase -e /test/db/tech_st/10.2.0/appsutil/VIS_test.xml -stage /stage/startCD/Disk1/rapidwiz -showProgress -phase cfg -nopromptmsg
    Log file located at /test/db/tech_st/10.2.0/appsutil/log/VIS_test/ApplyDatabase_08271904.log
    | 0% completed
    / 0% completed
    - 0% completed
    \ 0% completed
    | 0% completed
    / 0% completed RC-50004: Fatal: Error occurred in ApplyDatabase:
    Control file creation failed
    Cannot execute configure of database using RapidClone
    RW-50010: Error: - script has returned an error: 1
    RW-50004: Error code received when running external process. Check log file for details.Running Database Install Driver for VIS instance
    Succesfully changed Permissions for /test/db/tech_st/10.2.0/appsutil/log/VIS_test
    Processing DriverFile = /stage/startCD/Disk1/rapidwiz/template/adridb.drv
    Running Instantiation Drivers for /stage/startCD/Disk1/rapidwiz/template/adridb.drv
    instantiate file:
    source : /stage/startCD/Disk1/rapidwiz/template/adrun10g.sh
    dest : /test/db/tech_st/10.2.0/temp/VIS_test/adrun10g.sh
    backup : /test/db/tech_st/10.2.0/temp/VIS_test/adrun10g.sh to /test/db/tech_st/10.2.0/appsutil/out/VIS_test/templbac/adrun10g.sh
    setting permissions: 755
    setting ownership: oracle:dba
    instantiate file:
    source : /stage/startCD/Disk1/rapidwiz/template/adrundb.sh
    dest : /test/db/tech_st/10.2.0/temp/VIS_test/adrundb.sh
    backup : /test/db/tech_st/10.2.0/temp/VIS_test/adrundb.sh to /test/db/tech_st/10.2.0/appsutil/out/VIS_test/templbac/adrundb.sh
    setting permissions: 755
    setting ownership: oracle:dba
    Step 0 of 5
    Command: /test/db/tech_st/10.2.0/temp/VIS_test/adrun10g.sh
    Step 1 of 5: Doing UNIX preprocessing
    Processing Step 1 of 5
    Step 1 of 5
    Command: /test/db/tech_st/10.2.0/temp/VIS_test/adrundb.sh
    Step 2 of 5: Doing UNIX preprocessing
    Processing Step 2 of 5
    Executing: su oracle -c "/test/db/tech_st/10.2.0/temp/VIS_test/adrundb.sh"
    STARTED INSTALL PHASE : DATABASE : Mon Aug 27 19:06:52 IST 2007
    Preparing environment to install databases ...
    Setting LD_LIBRARY_PATH to - /stage/startCD/Disk1/rapidwiz/lib/Linux -
    Setting PATH to - /stage/startCD/Disk1/rapidwiz/jlib/java:/stage/startCD/Disk1/rapidwiz/jlib/xmlparserv2.jar:/stage/startCD/Disk1/rapidwiz/jlib/ojdbc14.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/OraInstaller.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/ewt3.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/share.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/srvm.jar -
    Setting CLASSPATH to - /stage/startCD/Disk1/rapidwiz/jlib/java:/stage/startCD/Disk1/rapidwiz/jlib/xmlparserv2.jar:/stage/startCD/Disk1/rapidwiz/jlib/ojdbc14.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/OraInstaller.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/ewt3.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/share.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/srvm.jar -
         ... installing VISION demo database
    FINISHED INSTALL PHASE : DATABASE : Mon Aug 27 19:06:53 IST 2007
    su oracle -c "/test/db/tech_st/10.2.0/temp/VIS_test/adrundb.sh" has succeeded
    Succesfully changed Permissions for /test/db/tech_st/10.2.0/temp
    ===============================================================================
    NetServiceHandler 120.13 started for test at Mon Aug 27 19:06:54 IST 2007
    ===============================================================================
    [ Context Information ]
    Host : test
    Domain : apps.com
    Out Dir : null
    Tier Type : DATABASE TIER
    Getting connection...
    ADX Database Utility
    getConnectionUsingAppsJDBCConnector() -->
    APPS_JDBC_URL='null'
    Trying to get connection using SID based connect descriptor
    getConnection() -->
    sDbHost : test
    sDbDomain : apps.com
    sDbPort : 1531
    sDbSid : VIS
    sDbUser : APPS
    Trying to connect using SID...
    getConnectionUsingSID() -->
    JDBC URL: jdbc:oracle:thin:@test.apps.com:1531:VIS
    Exception occurred: java.sql.SQLException: ORA-01034: ORACLE not available
    ORA-27101: shared memory realm does not exist
    Linux Error: 2: No such file or directory
    Trying to connect using SID as ServiceName
    getConnectionUsingServiceName() -->
    JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=test.apps.com)(PORT=1531))(CONNECT_DATA=(SERVICE_NAME=VIS)))
    java.lang.NoSuchFieldError: TDU
    Please refer to the remaining logs on applications node at - /test/inst/apps/VIS_test/logs/08271731.log
    Can Some one pls reply
    Thanks and Regards,
    Amol

    promptUserForDiskPath Oracle Applications Rapid Install - RDBMS & Disk number = 1
    Path Obtained by Instantiate File: /prod/stage/oraDB/Disk1 & Disk number = 1
    Processing /prod/stage/oraDB/Disk1/dbts/driver/db102.drv file
    ================================================================
    Processing the contents of : Disk1
    Processing the driver file : /prod/stage/oraDB/Disk1/dbts/driver/Disk1.drv
    UNZIPPING THE DISK1 CONTENTS
    UNZIP used: UnZip 5.51 of 22 May 2004, by Info-ZIP. Maintained by C. Spieler. Send
    Unzip0 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db58_opmn.zip at /test/db/tech_st/10.2.0/
    Unzip0
    .end std out.
    .end err out.
    Unzip0 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db58_opmn.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..Unzip1 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db74_.patch_storage.zip at /test/db/tech_st/10.2.0/
    Unzip1
    .end std out.
    .end err out.
    Unzip1 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db74_.patch_storage.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..Unzip2 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db26_javavm.zip at /test/db/tech_st/10.2.0/
    Unzip2
    .end std out.
    .end err out.
    Unzip2 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db26_javavm.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..Unzip5 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db23_javavm.zip at /test/db/tech_st/10.2.0/
    Unzip5
    .end std out.
    .end err out.
    Unzip5 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db23_javavm.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..Unzip6 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db29_javavm.zip at /test/db/tech_st/10.2.0/
    Unzip6
    .end std out.
    .end err out.
    Unzip6 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db29_javavm.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..Unzip3 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db22_javavm.zip at /test/db/tech_st/10.2.0/
    Unzip3
    .end std out.
    .end err out.
    Unzip3 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db22_javavm.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..Unzip4 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db9_bin.zip at /test/db/tech_st/10.2.0/
    Unzip4
    .end std out.
    .end err out.
    Unzip4 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db9_bin.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..Unzip8 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db24_javavm.zip at /test/db/tech_st/10.2.0/
    Unzip8
    .end std out.
    .end err out.
    Unzip8 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db24_javavm.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..Unzip9 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db27_javavm.zip at /test/db/tech_st/10.2.0/
    Unzip9
    .end std out.
    .end err out.
    Unzip9 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db27_javavm.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..Unzip7 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db25_javavm.zip at /test/db/tech_st/10.2.0/
    Unzip7
    .end std out.
    .end err out.
    Unzip7 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db25_javavm.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..Unzip12 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db73_.patch_storage.zip at /test/db/tech_st/10.2.0/
    Unzip12
    .end std out.
    .end err out.
    Unzip12 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db73_.patch_storage.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..Unzip13 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db11_bin.zip at /test/db/tech_st/10.2.0/
    Unzip13
    .end std out.
    .end err out.
    Unzip13 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db11_bin.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..Unzip14 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db37_lib.zip at /test/db/tech_st/10.2.0/
    Unzip14
    .end std out.
    .end err out.
    Unzip14 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db37_lib.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..Unzip10 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db20_demo.zip at /test/db/tech_st/10.2.0/
    Unzip10
    .end std out.
    .end err out.
    Unzip10 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db20_demo.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..Unzip17 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db62_.patch_storage.zip at /test/db/tech_st/10.2.0/
    Unzip17
    .end std out.
    .end err out.
    Unzip17 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db62_.patch_storage.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..Unzip15 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db54_rdbms.zip at /test/db/tech_st/10.2.0/
    Unzip15
    .end std out.
    .end err out.
    Unzip15 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db54_rdbms.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..Unzip16 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db42_lib.zip at /test/db/tech_st/10.2.0/
    Unzip16
    .end std out.
    .end err out.
    Unzip16 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db42_lib.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..Unzip11 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db19_demo.zip at /test/db/tech_st/10.2.0/
    Unzip11
    .end std out.
    .end err out.
    Unzip11 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db19_demo.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..Unzip20 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db8_bin.zip at /test/db/tech_st/10.2.0/
    Unzip20
    .end std out.
    .end err out.
    Unzip20 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db8_bin.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..Unzip19 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db1_appsutil.zip at /test/db/tech_st/10.2.0/
    Unzip19
    .end std out.
    .end err out.
    Unzip19 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db1_appsutil.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..Unzip21 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db33_jdk.zip at /test/db/tech_st/10.2.0/
    Unzip21
    .end std out.
    .end err out.
    Unzip21 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db33_jdk.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..Unzip18 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db40_lib.zip at /test/db/tech_st/10.2.0/
    Unzip18
    .end std out.
    .end err out.
    Unzip18 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db40_lib.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..Unzip22 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db72_.patch_storage.zip at /test/db/tech_st/10.2.0/
    Unzip22
    .end std out.
    .end err out.
    Unzip22 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db72_.patch_storage.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..Unzip23 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db35_jlib.zip at /test/db/tech_st/10.2.0/
    Unzip23
    .end std out.
    .end err out.
    Unzip23 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db35_jlib.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..Unzip25 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db53_rdbms.zip at /test/db/tech_st/10.2.0/
    Unzip25
    .end std out.
    .end err out.
    Unzip25 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db53_rdbms.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..Unzip26 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db13_ctx.zip at /test/db/tech_st/10.2.0/
    Unzip26
    .end std out.
    .end err out.
    Unzip26 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db13_ctx.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..Unzip27 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db57_wf.zip at /test/db/tech_st/10.2.0/
    Unzip27
    .end std out.
    .end err out.
    Unzip27 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db57_wf.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..Unzip24 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db0_appsutil.zip at /test/db/tech_st/10.2.0/
    Unzip24
    .end std out.
    .end err out.
    Unzip24 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db0_appsutil.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..Unzip29 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db36_jre.zip at /test/db/tech_st/10.2.0/
    Unzip29
    .end std out.
    .end err out.
    Unzip29 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db36_jre.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..Unzip31 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db14_ctx.zip at /test/db/tech_st/10.2.0/
    Unzip31
    .end std out.
    .end err out.
    Unzip31 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db14_ctx.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..Unzip33 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db70_.patch_storage.zip at /test/db/tech_st/10.2.0/
    Unzip33
    .end std out.
    .end err out.
    Unzip33 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db70_.patch_storage.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..Unzip28 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db2_appsutil.zip at /test/db/tech_st/10.2.0/
    Unzip28
    .end std out.
    .end err out.
    Unzip28 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db2_appsutil.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..Unzip32 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db68_.patch_storage.zip at /test/db/tech_st/10.2.0/
    Unzip32
    .end std out.
    .end err out.
    Unzip32 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db68_.patch_storage.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..Unzip30 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db52_rdbms.zip at /test/db/tech_st/10.2.0/
    Unzip30
    .end std out.
    .end err out.
    Unzip30 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db52_rdbms.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..Unzip34 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db64_.patch_storage.zip at /test/db/tech_st/10.2.0/
    Unzip34
    .end std out.
    .end err out.
    Unzip34 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db64_.patch_storage.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..Unzip37 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db76_.patch_storage.zip at /test/db/tech_st/10.2.0/
    Unzip37
    .end std out.
    .end err out.
    Unzip37 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db76_.patch_storage.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..Unzip36 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db90_.patch_storage.zip at /test/db/tech_st/10.2.0/
    Unzip36
    .end std out.
    .end err out.
    Unzip36 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db90_.patch_storage.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..Unzip35 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db44_md.zip at /test/db/tech_st/10.2.0/
    Unzip35
    .end std out.
    .end err out.
    Unzip35 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db44_md.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..Unzip40 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db80_.patch_storage.zip at /test/db/tech_st/10.2.0/
    Unzip40
    .end std out.
    .end err out.
    Unzip40 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db80_.patch_storage.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..Unzip41 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db21_javavm.zip at /test/db/tech_st/10.2.0/
    Unzip41
    .end std out.
    .end err out.
    Unzip41 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db21_javavm.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..Unzip42 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db30_javavm.zip at /test/db/tech_st/10.2.0/
    Unzip43 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db49_nls.zip at /test/db/tech_st/10.2.0/
    Unzip38 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db31_inventory.zip at /test/db/tech_st/10.2.0/
    Unzip38
    .end std out.
    .end err out.
    Unzip38 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db31_inventory.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..Unzip39 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db3_appsutil.zip at /test/db/tech_st/10.2.0/
    Unzip39
    .end std out.
    .end err out.
    Unzip39 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db3_appsutil.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..Unzip44 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db28_javavm.zip at /test/db/tech_st/10.2.0/
    Unzip42
    .end std out.
    .end err out.
    Unzip42 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db30_javavm.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..AutoConfig is exiting with status 0
    Processing disk file : disk.label in /prod/stage/oraDB/Disk2
    Checking the content :disk.label
    All contents are valid.....
    =============================================================
    Processing the contents of : Disk2
    Processing the driver file : /prod/stage/oraDB/Disk2/dbts/driver/Disk2.drv
    UNZIPPING THE DISK2 CONTENTS
    Unzip45 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db60_.patch_storage.zip at /test/db/tech_st/10.2.0/
    Unzip45
    .end std out.
    .end err out.
    Unzip45 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db60_.patch_storage.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..Unzip46 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db59_.patch_storage.zip at /test/db/tech_st/10.2.0/
    Unzip46
    .end std out.
    .end err out.
    Unzip46 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db59_.patch_storage.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..Unzip47 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db61_.patch_storage.zip at /test/db/tech_st/10.2.0/
    Unzip47
    .end std out.
    .end err out.
    Unzip47 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db61_.patch_storage.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..Unzip50 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db63_.patch_storage.zip at /test/db/tech_st/10.2.0/
    Unzip50
    .end std out.
    .end err out.
    Unzip50 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db63_.patch_storage.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..Unzip48 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db39_lib.zip at /test/db/tech_st/10.2.0/
    Unzip48
    .end std out.
    .end err out.
    Unzip48 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db39_lib.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..Unzip49 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db65_.patch_storage.zip at /test/db/tech_st/10.2.0/
    Unzip49
    .end std out.
    .end err out.
    Unzip49 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db65_.patch_storage.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..Unzip51 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db89_.patch_storage.zip at /test/db/tech_st/10.2.0/
    Unzip51
    .end std out.
    .end err out.
    Unzip51 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db89_.patch_storage.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..Unzip52 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db77_.patch_storage.zip at /test/db/tech_st/10.2.0/
    Unzip52
    .end std out.
    .end err out.
    Unzip52 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db77_.patch_storage.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..Unzip57 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db69_.patch_storage.zip at /test/db/tech_st/10.2.0/
    Unzip57
    .end std out.
    .end err out.
    Unzip57 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db69_.patch_storage.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..Unzip55 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db81_.patch_storage.zip at /test/db/tech_st/10.2.0/
    Unzip55
    .end std out.
    .end err out.
    Unzip55 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db81_.patch_storage.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..Unzip53 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db75_.patch_storage.zip at /test/db/tech_st/10.2.0/
    Unzip53
    .end std out.
    .end err out.
    Unzip53 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db75_.patch_storage.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..Unzip56 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db83_.patch_storage.zip at /test/db/tech_st/10.2.0/
    Unzip56
    .end std out.
    .end err out.
    Unzip56 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db83_.patch_storage.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..Unzip58 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db71_.patch_storage.zip at /test/db/tech_st/10.2.0/
    Unzip58
    .end std out.
    .end err out.
    Unzip58 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db71_.patch_storage.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..Unzip54 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db79_.patch_storage.zip at /test/db/tech_st/10.2.0/
    Unzip54
    .end std out.
    .end err out.
    Unzip54 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db79_.patch_storage.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..Unzip61 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db67_.patch_storage.zip at /test/db/tech_st/10.2.0/
    Unzip61
    .end std out.
    .end err out.
    Unzip61 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db67_.patch_storage.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..Unzip60 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db87_.patch_storage.zip at /test/db/tech_st/10.2.0/
    Unzip60
    .end std out.
    .end err out.
    Unzip60 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db87_.patch_storage.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..Unzip62 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db48_network.zip at /test/db/tech_st/10.2.0/
    Unzip62
    .end std out.
    .end err out.
    Unzip62 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db48_network.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..Unzip63 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db50_oui.zip at /test/db/tech_st/10.2.0/
    Unzip63
    .end std out.
    .end err out.
    Unzip63 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db50_oui.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..Unzip59 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db85_.patch_storage.zip at /test/db/tech_st/10.2.0/
    Unzip59
    .end std out.
    .end err out.
    Unzip59 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db85_.patch_storage.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..Unzip65 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db4_appsutil.zip at /test/db/tech_st/10.2.0/
    Unzip64 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db32_jdk.zip at /test/db/tech_st/10.2.0/
    Unzip66 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db7_bin.zip at /test/db/tech_st/10.2.0/
    Unzip67 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db10_bin.zip at /test/db/tech_st/10.2.0/
    Unzip68 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db16_ctx.zip at /test/db/tech_st/10.2.0/
    Unzip68
    .end std out.
    .end err out.
    Unzip68 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db16_ctx.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..Unzip66
    .end std out.
    .end err out.
    Unzip66 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db7_bin.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..Unzip65
    .end std out.
    .end err out.
    Unzip65 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db4_appsutil.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..AutoConfig is exiting with status 0
    Processing disk file : disk.label in /prod/stage/oraDB/Disk3
    Checking the content :disk.label
    All contents are valid.....
    =============================================================
    Processing the contents of : Disk3
    Processing the driver file : /prod/stage/oraDB/Disk3/dbts/driver/Disk3.drv
    UNZIPPING THE DISK3 CONTENTS
    Unzip71 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db84_.patch_storage.zip at /test/db/tech_st/10.2.0/
    Unzip71
    .end std out.
    .end err out.
    Unzip71 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db84_.patch_storage.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..Unzip73 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db66_.patch_storage.zip at /test/db/tech_st/10.2.0/
    Unzip73
    .end std out.
    .end err out.
    Unzip73 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db66_.patch_storage.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..Unzip69 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db55_sysman.zip at /test/db/tech_st/10.2.0/
    Unzip69
    .end std out.
    .end err out.
    Unzip69 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db55_sysman.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..Unzip72 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db47_oc4j.zip at /test/db/tech_st/10.2.0/
    Unzip72
    .end std out.
    .end err out.
    Unzip72 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db47_oc4j.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..Unzip70 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db56_sysman.zip at /test/db/tech_st/10.2.0/
    Unzip70
    .end std out.
    .end err out.
    Unzip70 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db56_sysman.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..Unzip78 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db86_.patch_storage.zip at /test/db/tech_st/10.2.0/
    Unzip78
    .end std out.
    .end err out.
    Unzip78 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db86_.patch_storage.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..Unzip74 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db45_oc4j.zip at /test/db/tech_st/10.2.0/
    Unzip74
    .end std out.
    .end err out.
    Unzip74 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db45_oc4j.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..Unzip76 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db34_jdk.zip at /test/db/tech_st/10.2.0/
    Unzip76
    .end std out.
    .end err out.
    Unzip76 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db34_jdk.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..Unzip79 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db78_.patch_storage.zip at /test/db/tech_st/10.2.0/
    Unzip79
    .end std out.
    .end err out.
    Unzip79 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db78_.patch_storage.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..Unzip81 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db6_assistants.zip at /test/db/tech_st/10.2.0/
    Unzip81
    .end std out.
    .end err out.
    Unzip81 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db6_assistants.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..Unzip82 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db18_demo.zip at /test/db/tech_st/10.2.0/
    Unzip82
    .end std out.
    .end err out.
    Unzip82 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db18_demo.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..Unzip83 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db51_perl.zip at /test/db/tech_st/10.2.0/
    Unzip83
    .end std out.
    .end err out.
    Unzip83 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db51_perl.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..Unzip84 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db41_lib.zip at /test/db/tech_st/10.2.0/
    Unzip84
    .end std out.
    .end err out.
    Unzip84 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db41_lib.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..Unzip85 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db12_bin.zip at /test/db/tech_st/10.2.0/
    Unzip85
    .end std out.
    .end err out.
    Unzip85 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db12_bin.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..Unzip86 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db15_ctx.zip at /test/db/tech_st/10.2.0/
    Unzip86
    .end std out.
    .end err out.
    Unzip86 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db15_ctx.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..Unzip87 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db38_lib.zip at /test/db/tech_st/10.2.0/
    Unzip87
    .end std out.
    .end err out.
    Unzip87 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db38_lib.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..Unzip80 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db88_.patch_storage.zip at /test/db/tech_st/10.2.0/
    Unzip80
    .end std out.
    .end err out.
    Unzip80 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db88_.patch_storage.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..Unzip77 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db46_oc4j.zip at /test/db/tech_st/10.2.0/
    Unzip77
    .end std out.
    .end err out.
    Unzip77 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db46_oc4j.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..Unzip75 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db17_demo.zip at /test/db/tech_st/10.2.0/
    Unzip75
    .end std out.
    .end err out.
    Unzip75 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db17_demo.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..Unzip89 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db43_lib.zip at /test/db/tech_st/10.2.0/
    Unzip88 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db82_.patch_storage.zip at /test/db/tech_st/10.2.0/
    Unzip90 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db5_assistants.zip at /test/db/tech_st/10.2.0/
    Unzip89
    .end std out.
    .end err out.
    Unzip89 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db43_lib.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..Unzip88
    .end std out.
    .end err out.
    Unzip88 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db82_.patch_storage.zip -d /test/db/tech_st/10.2.0/
    Thread exiting ..AutoConfig is exiting with status 0
    AutoConfig is exiting with status 0
    AutoConfig is exiting with status 0
    Pls check NO ERROR found

  • RC-50004: Fatal: Error occurred in ApplyDatabase:  Control file creation failed  Cannot execute configure of database using RapidClone

    dear associates,
    linux version: red hat enterprise  linux 4.0.
    EBS version: 12.1.1
    RC-50004: Fatal: Error occurred in ApplyDatabase:
    Control file creation failed
    Cannot execute configure of database using RapidClone
    RW-50010: Error: - script has returned an error:   1
    RW-50004: Error code received when running external process.  Check log file for details.
    Running Database Install Driver for VIS instance

    dear associates,
    can u please assist me how can over come this error or problem.
    linux version: red hat enterprise  linux 4.0.
    EBS version: 12.1.1
    RC-50004: Fatal: Error occurred in ApplyDatabase:
    Control file creation failed
    Cannot execute configure of database using RapidClone
    RW-50010: Error: - script has returned an error:   1
    RW-50004: Error code received when running external process.  Check log file for details.
    Running Database Install Driver for VIS instance

  • Excel file creation on application server

    Gurus,
    I have seen a lot of threads on excel file creation in application server, but failed to see if anyone had a solution.
    Problem: In background execution I need to create an excel sheet on application server, the data would be contained in internal table, The FM like WS_DOWNLOAD etc..cannot support these as they have GUI component.
    All the documentation that I have been through states to use dataset which saves the file in.csv or txt format seperated by delimiter, is it possible to save as a true excel file.
    same as this thread:
    Re: Excel download in Application Server
    let me know,
    Thanks in advance .

    * Write column headers, if required
      IF column_headers = 'X'.
    *   ... override field names with LABELS_IN, if specified
        IF NOT labels_in[] IS INITIAL.
          DESCRIBE TABLE labels_in LINES num_lines.
          IF num_lines > num_fields.
            RAISE too_many_labels.
          ELSEIF num_lines < num_fields.
            RAISE too_few_labels.
          ENDIF.
          ASSIGN COMPONENT 1 OF STRUCTURE labels_in TO <f>.
          LOOP AT fields_in.
            READ TABLE labels_in INDEX sy-tabix.
            fields_in-name = labels_in-name.
            MODIFY fields_in.
          ENDLOOP.
        ENDIF.
    *   ...write column headers to file...
        position = 0.
        LOOP AT fields_in.
          IF fixed_length NE space.
    *** INSERT: DAR was here for Issue 17817 --------------- dar012009 ---v
            field_len = STRLEN( fields_in-name ).
    *** INSERT: DAR was here for Issue 17817 --------------- dar012009 ---^
            DO fields_in-len TIMES.
              offset = sy-index - 1.
    *          IF sy-index > 15.                                 dar012009
              IF sy-index > field_len.                          "dar012009
                line_out+position(1) = space.
              ELSEIF fields_in-name+offset(1) NE space.
                line_out+position(1) = fields_in-name+offset(1).
              ELSE.
                line_out+position(1) = space.
              ENDIF.
              position = position + 1.
            ENDDO.
          ELSE.
            CONCATENATE line_out fields_in-name INTO line_out
              SEPARATED BY delimiter.
          ENDIF.
        ENDLOOP.
        IF fixed_length EQ space.
          SHIFT line_out LEFT DELETING LEADING delimiter.
        ENDIF.
        IF no_write IS INITIAL.                                 "dar041505
          TRANSFER line_out TO file_out.
        ENDIF.                                                  "dar041505
        data_out = line_out.  APPEND data_out.                  "dar041505
      ENDIF.
    * Write lines to file...
      LOOP AT data_in.
        CLEAR line_out.
        position = 0.
        DO num_fields TIMES.
          ASSIGN COMPONENT sy-index OF STRUCTURE data_in TO <f>.

  • Used Migration Assistant to successfully transfer PC files to Mini. However file creation or modified date does not transfer. Date of creation is listed as day of transfer.  I would gratefully appreciate any help in solving this,

    Used Migration Assistant to successfully transfer PC files to Mini. However file creation or modified date does not transfer. Date of creation is listed as day of transfer.  I would gratefully appreciate any help in solving this?

    I have the same problem; used Migration Assistant to transfer all my pix from PC to MacbookPro, however dates of pix were not transferred. Date created as the date of transfer. Cannot sort my pix according to date.
    Anybody has an answer?

  • Nfs mount point does not allow file creations via java.io.File

    Folks,
    I have mounted an nfs drive to iFS on a Solaris server:
    mount -F nfs nfs://server:port/ifsfolder /unixfolder
    I can mkdir and touch files no problem. They appear in iFS as I'd expect. However if I write to the nfs mount via a JVM using java.io.File encounter the following problems:
    Only directories are created ? unless I include the user that started the JVM in the oinstall unix group with the oracle user because it's the oracle user that writes to iFS not the user that creating the files!
    I'm trying to create several files in a single directory via java.io.File BUT only the first file is created. I've tried putting waits in the code to see if it a timing issue but this doesn't appear to be. Writing via java.io.File to either a native directory of a native nfs mountpoint works OK. ie. Junit test against native file system works but not against an iFS mount point. Curiously the same unit tests running on PC with a windows driving mapping to iFS work OK !! so why not via a unix NFS mapping ?
    many thanks in advance.
    C

    Hi Diep,
    have done as requested via Oracle TAR #3308936.995. As it happens the problem is resolved. The resolution has been not to create the file via java.io.File.createNewFile(); before adding content via an outputStream. if the File creation is left until the content is added as shown below the problem is resolved.
    Another quick question is link creation via 'ln -fs' and 'ln -f' supported against and nfs mount point to iFS ? (at Operating System level, rather than adding a folder path relationship via the Java API).
    many thanks in advance.
    public void createFile(String p_absolutePath, InputStream p_inputStream) throws Exception
    File file = null;
    file = new File(p_absolutePath);
    // Oracle TAR Number: 3308936.995
    // Uncomment line below to cause failure java.io.IOException: Operation not supported on transport endpoint
    // at java.io.UnixFileSystem.createFileExclusively(Native Method)
    // at java.io.File.createNewFile(File.java:828)
    // at com.unisys.ors.filesystemdata.OracleTARTest.createFile(OracleTARTest.java:43)
    // at com.unisys.ors.filesystemdata.OracleTARTest.main(OracleTARTest.java:79)
    //file.createNewFile();
    FileOutputStream fos = new FileOutputStream(file);
    byte[] buffer = new byte[1024];
    int noOfBytesRead = 0;
    while ((noOfBytesRead = p_inputStream.read(buffer, 0, buffer.length)) != -1)
    fos.write(buffer, 0, noOfBytesRead);
    p_inputStream.close();
    fos.flush();
    fos.close();
    }

  • Delaying folder action until file creation is complete

    I'm trying to create a folder action that takes the output of a bounce from ProTools and then imports it into iTunes. The problem I'm having is that it takes real time (about 20 min) to create the complete ProTools file in the folder, however the script begins to execute immediately, before the bounce is complete. This gives me 1 second of audio garbage.
    Is there any way to delay the folder action until the file creation (bounce, upload, transfer, whatever) is done?
    Thanks.

    V.K. Thanks again for your help. When I look in my folder directory/library/scripts/folder action scripts, I see many scripts for images as well as scripts for closing subfolders, converting to pdf, open - show comments in dialog, and add - new item alert, however I don't see anything that was created recently (i.e. something that was created when I built my Automator workflow (folder action). The closest (to what I am looking for) Folder Action Script could find was "add - new item alert.scpt", which is an existing Apple written script, but this will not really help me. When I created my initial automator script, it created a folder and file and workflow in my homefolder/library/Workflows/Applications/Folder Actions/xxx.workflow, however I cannot open this workflow in applescript. I even tried changing the extension to .scpt. I'm not sure I can accomplish the desired result with Automator alone, but I don't think I am well versed enough in AppleScript. Thanks for your help.

  • Check default user file creation mask on installing 11g RAC

    Check default user file creation mask
    Node Name Available Required Comment
    bnl11237dat02 0027 0022 failed
    bnl11237dat01 0022 0022 passed
    Result: Default user file creation mask check failed
    ----------------------------------------------bash_profile
    # .bash_profile
    # Get the aliases and functions
    if [ -f ~/.bashrc ]; then
    . ~/.bashrc
    fi
    # User specific environment and startup programs
    PATH=$PATH:$HOME/bin
    export PATH
    ORACLE_BASE=/u01/app/oracle
    export ORACLE_BASE
    if [ $SHELL = "/bin/ksh" ]; then
    ulimit -p 16384
    ulimit -n 65536
    else
    ulimit -u 16384 -n 65536
    fi
    umask 022
    if [ -t 0 ]; then
    stty intr ^C
    fi
    I am getting this error when running ./runcluvfy.sh stage -pre crsinst -n bnl11237dat01.youview.tv,bnl11237dat02.youview.tv -fixup -verbose > ~oracle/run_pre_install_cluvfy.out.11
    Please can I know what is causing umask check fails

    Folks,
    Hello. I follow the document "Oracle Grid Infrastructure Installation Guide 11g Release 2 (11.2) for Linux E22489-04" and do the following:
    [root@rac1 /]#echo $SHELL
    Output: /bin/bash
    This means we need to edit Bash shell file .bash_profile.
    [ora11g@rac1 ~]$vi /home/ora11g/.bash_profile
    Add this line: umask 022
    Then I save the file .bash_profile and reboot OS.
    Then I run the following command:
    [ora11g@rac1 grid] $ ./runcluvfy.sh stage -pre crsinst -n all -r 11gR2 -orainv ora11g -fixup -fixupdir /mydir -verbose
    But the reusult is the same. The issue is not solved as follows:
    Check default user profile creation mask:
    Node Name: rac1
    Available: 0002
    Required: 0022
    Comment: failed
    Do any folk understand how to solve VM rac1 user profile creation mask problem ?
    Thanks.

  • Force mask file creation in one dir

    I need to force mask file creation in one dir.
    Basically this is the situation
    "document" is a shared dir, SGID is already set on the dir so all new files are created as group "office".
    But they are created with 644 mask so they are not accessible by other users in the group.
    I do not want change the default user mask with umask because of security reason, but I need that in this dir file are created with 664 mask.
    Suggestion??

    I Think I should run the cronjob each minute in order to prevent problems.
    Is it possible that there is no other way?
    even samba can force mask user and group on per share ......
    There should be another way......

Maybe you are looking for

  • Add button to shipment dynpro vt02n without modification

    Hi all, is it possible to add a button (or someting else) into shipment transaction vt02n subdynpro 1030 (or any other subdynpro) without modification. In material master data it is possible over customizing. Is this possible in shipments, too? Thank

  • BC-XI V3.0 Message Mapping with Java Class

    Hi all In the Integretion Builder Design i try to import a Java Class in order to convert a source to a target field. I have created an tested the class with the eclipse V3.0. If i import the source in a customized mapping function i always get the e

  • 9 pro updates

    When I choose Update Adobe Acrobat 9 Pro from the help menu the message no updates available appears. After going to the update website I can see that update is at 9.5.5. My version is at 9.2.0. After downloading 9.5.5. it will not install. Do I have

  • Receiver SFTP Adapter

    Dear Gurus,       I have configured receiver SFTP adapter using key based authentication to place the files in root (~/) folder, we have shared our public key to the SFTP vendor and they stored it in their key store.       But while testing the scena

  • IPOD to STEREO

    I have the Video/Audio AV Cables, and i plug then into the audio inlets in the back of the stereo, but what does the stereo need to be set on? Tuner? Disk? And if its on Tuner, how do i get it to work, AM ? FM? Which works best?