Excel file creation on application server
Gurus,
I have seen a lot of threads on excel file creation in application server, but failed to see if anyone had a solution.
Problem: In background execution I need to create an excel sheet on application server, the data would be contained in internal table, The FM like WS_DOWNLOAD etc..cannot support these as they have GUI component.
All the documentation that I have been through states to use dataset which saves the file in.csv or txt format seperated by delimiter, is it possible to save as a true excel file.
same as this thread:
Re: Excel download in Application Server
let me know,
Thanks in advance .
* Write column headers, if required
IF column_headers = 'X'.
* ... override field names with LABELS_IN, if specified
IF NOT labels_in[] IS INITIAL.
DESCRIBE TABLE labels_in LINES num_lines.
IF num_lines > num_fields.
RAISE too_many_labels.
ELSEIF num_lines < num_fields.
RAISE too_few_labels.
ENDIF.
ASSIGN COMPONENT 1 OF STRUCTURE labels_in TO <f>.
LOOP AT fields_in.
READ TABLE labels_in INDEX sy-tabix.
fields_in-name = labels_in-name.
MODIFY fields_in.
ENDLOOP.
ENDIF.
* ...write column headers to file...
position = 0.
LOOP AT fields_in.
IF fixed_length NE space.
*** INSERT: DAR was here for Issue 17817 --------------- dar012009 ---v
field_len = STRLEN( fields_in-name ).
*** INSERT: DAR was here for Issue 17817 --------------- dar012009 ---^
DO fields_in-len TIMES.
offset = sy-index - 1.
* IF sy-index > 15. dar012009
IF sy-index > field_len. "dar012009
line_out+position(1) = space.
ELSEIF fields_in-name+offset(1) NE space.
line_out+position(1) = fields_in-name+offset(1).
ELSE.
line_out+position(1) = space.
ENDIF.
position = position + 1.
ENDDO.
ELSE.
CONCATENATE line_out fields_in-name INTO line_out
SEPARATED BY delimiter.
ENDIF.
ENDLOOP.
IF fixed_length EQ space.
SHIFT line_out LEFT DELETING LEADING delimiter.
ENDIF.
IF no_write IS INITIAL. "dar041505
TRANSFER line_out TO file_out.
ENDIF. "dar041505
data_out = line_out. APPEND data_out. "dar041505
ENDIF.
* Write lines to file...
LOOP AT data_in.
CLEAR line_out.
position = 0.
DO num_fields TIMES.
ASSIGN COMPONENT sy-index OF STRUCTURE data_in TO <f>.
Similar Messages
-
Upload and download of excel file in the application server in background
Hi all,
i want to download the excel file from application server into internal table and after processing i have to upload to excel file in the application server in the background mode..
i mean i'll schedule the program in background.
im using FM ALSM_EXCEL_TO_INTERNAL_TABLE its working fine in fore ground but not in back ground.
what method i have to follow ?Hi Ankit,
I think this is not possible to open a Excel-File from the application server because the Excel format before Office 2007 where a binary format (Suffix: .xls). The newer Office file format (Suffix: xlsx) is a zipped XML Format. To read the binary Excel-Format you need an OLE Connection between SAP GUI and Office. But at the application server in background you doesn't have this OLE Connection.
In my opinion you have two possibilities:
1. Convert all files in the CSV format. This file format can be read with open dataset.
2. Upload the files from the presentation server in forground. There are some funktion modules in the standard which can read the xls format. But they have some limits regarding the length of cells content.
My recommendation is solution no. 1. If you know an VBA expert, he can write an Excel-macro which converts all Excel Files in the CSV-Fomat.
Regards
Dirk -
Excel File downloaded from application server is also opening in notepad
Hi Friends,
While downlaoding an excel file from the application server,we are able to open in notepad also.But this does not conatin the excel properties and hence happening.File should only oopen with excel and no other file type
Can any open help on this
ld_file = '/usr/sap/trans/abap/HR_DATA.xls'.
OPEN DATASET ld_file FOR OUTPUT in text mode ENCODING DEFAULT .
IF sy-subrc = 0.
LOOP AT int_final.
CLEAR wa_string.
CONCATENATE int_final-employee_sno int_final-employee_code INTO wa_string SEPARATED BY con_tab.
CONCATENATE wa_string int_final-first_name INTO wa_string SEPARATED BY con_tab.
please help...
Edited by: Neliea on Oct 29, 2009 1:11 PMHi,
Please refer to these links.
[url]Re: Internal table to excel download?;url]
[url]Re: Transfer from Internal Table to EXCEL file...;url]
Regards,
Aditya -
Excel file located in application server to be uploaded
Hello friends,
Please tell me what are the steps to be followed while uploading the data from a file in EXCEL format located in application server in to SAP data base using BDC.
Thanks in advance,
Ram.declarations:
DATA:IT_EXCEL LIKE TABLE OF ALSMEX_TABLINE WITH HEADER LINE.
I guess u r familiar with notepad upload.....just use your declaration as it is. Below is a basic demonstration of uploading data from excel...reward if useful.
Excel file Locating.
SELECTION-SCREEN SKIP 1.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-002.
PARAMETERS: P_FILE TYPE LOCALFILE OBLIGATORY .
SELECTION-SCREEN END OF BLOCK B1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
EXPORTING
STATIC = 'X'
CHANGING
FILE_NAME = P_FILE.
Check whether the uploaded fiel is excel or not
AT SELECTION-SCREEN ON P_FILE.
WK_LEN = P_FILE.
CONDENSE WK_LEN NO-GAPS.
LENT = STRLEN( WK_LEN ).
WK_ALP = LENT - 4.
B = WK_LEN+WK_ALP(LENT).
IF ( B NE '.xls' AND B NE '.XLS' ).
MESSAGE E939.
CLEAR P_FILE.
STOP.
ENDIF.
START-OF-SELECTION.
do all the othre process here
PERFORM FETCH_FROM_FLAT_FILE.
store the values to your normal itab and the process.
LOOP AT IT_EXCEL.
CASE IT_EXCEL-COL.
WHEN '0001'.
MOVE: IT_EXCEL-VALUE TO RECORD1-MATNR_005.
WHEN '0002'.
MOVE: IT_EXCEL-VALUE TO WK_WERKS.
WHEN '0003'.
MOVE: IT_EXCEL-VALUE TO RECORD1-BUDAT_002.
WHEN '0004'.
MOVE: IT_EXCEL-VALUE TO RECORD1-BKTXT_004.
WHEN '0005'.
MOVE: IT_EXCEL-VALUE TO RECORD1-ERFMG_007.
WHEN '0006'.
MOVE: IT_EXCEL-VALUE TO RECORD1-ERFMG_008.
ENDCASE.
AT END OF ROW.
APPEND RECORD1.
CLEAR RECORD1.
ENDAT.
ENDLOOP.
**Here record1 is the internal table holding the data fetched from excel
end-of-selection.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
EXPORTING
FILENAME = P_FILE
I_BEGIN_COL = 1 "From 1st Column
I_BEGIN_ROW = 2 "From 2nd row
I_END_COL = 6 "Till 6th Column
I_END_ROW = 65536 "Till Row
TABLES
INTERN = IT_EXCEL
EXCEPTIONS
INCONSISTENT_PARAMETERS = 1
UPLOAD_OLE = 2
OTHERS = 3.
CLEAR IT_EXCEL.
DESCRIBE TABLE IT_EXCEL.
IF SY-TFILL = 0.
MESSAGE I937.
STOP.
ENDIF. -
Creation of xml file in r3 application server (AL11)
Hi All
I need to create xml file in r3 application server (AL11) using PI.Can we achieve this using file adapter or we need to proceed with proxy. As I tried with file adapter with FTP transport protocol. Its giving the error as "Unable to create new pooled resource:FTPEx:Login incorrect".
Thanks in advance
Regards,
KartikeyaHi
need to create xml file in r3 application server (AL11) using PI.Can we achieve this using file adapter or we need to proceed with proxy.
To generate file at AL11 file directory use File adapter. Proxy is not required for this
Its giving the error as "Unable to create new pooled resource:FTPEx:Login incorrect".
1. Check with the Login credentials for the FTP service.
2. FTP User you use in communication channel must have 777 access to FTP location.
Thanks
Gaurav -
File transfer into application server
Hi folks.
I need to retrieve header records from table MCHB and RESB and transfer it into file.
Again for the corresponding header record, i need to transfer item records retrived from table MKOL and LFA1 as well.
One file each is to be create per plant.
But,i am not able to get item data into file.
My coding....
LOOP AT i_mchb INTO wa_mchb.
l_clabs = wa_mchb-clabs.
SHIFT l_clabs LEFT DELETING LEADING space.
Summarize requirement quantity
LOOP AT i_resb INTO wa_resb.
wa_sum-charg = wa_resb-charg.
wa_sum-bdmng = wa_resb-bdmng.
COLLECT wa_sum INTO i_sum.
SORT i_sum BY charg.
ENDLOOP.
READ TABLE i_sum INTO wa_sum WITH KEY charg = wa_mchb-charg.
IF sy-subrc EQ 0.
l_bdmng = wa_sum-bdmng.
SHIFT l_bdmng LEFT DELETING LEADING space.
ENDIF.
Calculation on Available quantity
l_avqty = l_bdmng - l_clabs.
SHIFT l_avqty LEFT DELETING LEADING space.
AT NEW werks.
*Creation of file
PERFORM sub_create_file.
Open File on the application server for processing
OPEN DATASET g_file_name FOR OUTPUT IN TEXT MODE
ENCODING DEFAULT.
IF sy-subrc NE 0.
*Display error message
MESSAGE i055 WITH g_file_name.
" Error in opening file
LEAVE LIST-PROCESSING.
ENDIF.
ENDAT.
Transfering data to file
CONCATENATE c_header "Header indentification
wa_mchb-matnr " Material number
wa_mchb-werks " Plant
wa_mchb-lgort " Storage location
wa_mchb-charg " Batch number
l_clabs " Valuated stock-unrestricted use
l_bdmng " Requirement quantity
l_avqty " Avalable quantity.
INTO l_record.
TRANSFER l_record TO g_file_name.
CLEAR: l_clabs,
l_bdmng,
l_avqty,
l_record.
READ TABLE i_mkol INTO wa_mkol WITH KEY matnr = wa_mchb-matnr
werks = wa_mchb-werks
lgort = wa_mchb-lgort
charg = wa_mchb-charg
BINARY SEARCH.
IF sy-subrc EQ 0.
l_tabix = sy-tabix.
LOOP AT i_mkol INTO wa_mkol FROM l_tabix.
*Population of consignment stock-unrestricted use
l_slabs = wa_mkol-slabs.
SHIFT l_slabs LEFT DELETING LEADING space.
READ TABLE i_lfa1 INTO wa_lfa1 WITH KEY lifnr = wa_mkol-lifnr.
sy-subrc check not done
CONCATENATE c_item " Item identification
l_slabs
" Consignment stock-unrestricted use
wa_mkol-lifnr " Vendor account number
wa_lfa1-name1 " Vendor name
INTO l_record.
TRANSFER l_record TO g_file_name.
CLEAR: l_slabs,
l_record.
ENDLOOP.
ENDIF.
AT END OF werks.
Close File
CLOSE DATASET g_file_name.
CLEAR g_file_name.
ENDAT.
ENDLOOP.Hi,
Yes thats correct. When using AT NEW. The field in internal table after the WERKS field will have ASTERSIK .
So before AT NEW. Assign the work area to another work area. Eg.
WA_mchb1 = wa_mchb.
Later on i.e. After ENDAT use everywhere WA_MCHB1 and not not WA_MCHB.
This will solve the problem.
wa_sum-charg = wa_resb-charg.
wa_sum-bdmng = wa_resb-bdmng.
COLLECT wa_sum INTO i_sum.
SORT i_sum BY charg.
ENDLOOP.
READ TABLE i_sum INTO wa_sum WITH KEY charg = wa_mchb-charg.
IF sy-subrc EQ 0.
l_bdmng = wa_sum-bdmng.
SHIFT l_bdmng LEFT DELETING LEADING space.
ENDIF.
Calculation on Available quantity
l_avqty = l_bdmng - l_clabs.
SHIFT l_avqty LEFT DELETING LEADING space.
<b>clear wa_mchb_new.</b>
<b>wa_mchb_new = wa_mchb.</b>
AT NEW werks.
*Creation of file
PERFORM sub_create_file.
Open File on the application server for processing
OPEN DATASET g_file_name FOR OUTPUT IN TEXT MODE
ENCODING DEFAULT.
IF sy-subrc NE 0.
*Display error message
MESSAGE i055 WITH g_file_name.
" Error in opening file
LEAVE LIST-PROCESSING.
ENDIF.
ENDAT.
Transfering data to file
CONCATENATE c_header "Header indentification
<b>wa_mchb_new-matnr " Material number
wa_mchb_new-werks " Plant
wa_mchb_new-lgort " Storage location
wa_mchb_new-charg " Batch number</b>l_clabs " Valuated stock-unrestricted use
l_bdmng " Requirement quantity
l_avqty " Avalable quantity.
INTO l_record.
TRANSFER l_record TO g_file_name.
CLEAR: l_clabs,
l_bdmng,
l_avqty,
l_record.
READ TABLE i_mkol INTO wa_mkol WITH KEY matnr = <b>wa_mchb_new-matnr
werks = wa_mchb_new-werks
lgort = wa_mchb_new-lgort
charg = wa_mchb_new-charg</b>BINARY SEARCH.
IF sy-subrc EQ 0.
l_tabix = sy-tabix.
LOOP AT i_mkol INTO wa_mkol FROM l_tabix.
*Population of consignment stock-unrestricted use
l_slabs = wa_mkol-slabs.
SHIFT l_slabs LEFT DELETING LEADING space.
READ TABLE i_lfa1 INTO wa_lfa1 WITH KEY lifnr = wa_mkol-lifnr.
sy-subrc check not done
CONCATENATE c_item " Item identification
l_slabs
" Consignment stock-unrestricted use
wa_mkol-lifnr " Vendor account number
wa_lfa1-name1 " Vendor name
INTO l_record.
TRANSFER l_record TO g_file_name.
CLEAR: l_slabs,
l_record.
ENDLOOP.
ENDIF.
AT END OF werks.
Close File
CLOSE DATASET g_file_name.
CLEAR g_file_name.
ENDAT.
ENDLOOP.
Best regards,
Prashant
PS : Please reward all helpful answers
Message was edited by: Prashant Patil
Message was edited by: Prashant Patil -
Maximum length of header in the file on the application server?
Hi there,
I am uploading a file on the application server. I am writing the header separately which is column heading in char format. Then I am writing the data to that file.
Now the problem is, I am unable to get more than 256 chars for each line in the file, including header, in <b>AL11 file view</b> and while I am <b>downloading that file on to my desktop</b>, I am <b>not</b> getting more than 256 chars from <b>header </b> line in my excel sheet however I am getting all the chars i.e. more than 256 chars of all the <b>data line</b>.
Please can you tell,what could be the problem or let me know any way to see and download all the header line fields.I am using more than 256 chars at both the places i.e. header and data line. Still I am not getting more than 256 chars in the file.
However while downloading that file onto the desktop, it is not showing more than 256 chars for the header part, but it showing all the values of data line, exceeding 256 chars. -
Excel file cannot connect to server, offline copy
Good day,
I have a user in my company's portal (SharePoint 2007) that cannot upload changes made in excel file.
He needs to have the compatibility view active in IE in order to be able to open the documents.
If he does not have the compatibility view of IE for the application he gets an error saying that "cannot connect to the server".
With the compatibility view the user is able to open documents, but what happens is that the excel file connection to the server.
So changes to the excel file are not submitted to the server.
Does anyone have any idea of how to fix this issue?
Is there any other information i can provide that can help on this issue?
Thank you.What is the OS version?
What is the Office version ?
Regards,
Pratik Vyas | SharePoint Consultant |
http://sharepointpratik.blogspot.com
Posting is provided AS IS with no warranties, and confers no rights
Please remember to click Mark As Answer if a post solves your problem or
Vote As Helpful if it was useful. -
How to see the file at the application server
HI TO ALL SDNERS ,
THIS IS MY CODE WHERE TO CHECK THE DOWNLOADED FILE AT THE APPLICATION SERVER.IN TCODE AL11 I HAVE SEEN THERE IS NO FILE GETTING CREATED.WHEN TRANSFERRING THE SY-SUBRC VALUE IS ZERO.
Program Name : ZME11_BDC.
Title : PURCHASE INFORMATION RECORD LOAD PROGRAM
Program Objective : THIS PROGRAM READS IN THE PURCHASE
INFORMATION FILE. IT CREATES A BDC SESSION TO
USE TO LOAD THE PURCHASE INFORMATION RECORDS
INTO SAP using the ME11 Transaction.
REPORT ZME11_BDC no standard page heading MESSAGE-ID ZHNC line-size 55.
constants declaration
constants: c_x value 'X',
c_sess type apqi-groupid value 'zcustomer',
c_xd01 type tstc-tcode value 'ME11'.
DECLARING VARIABLES
DATA: V_MSG(255),
V_ERREC TYPE I,"NO OF FAILED RECORDS
V_LINES."NO OF RECORDS
FLAG DECLARATIONS
DATA: FG_DATA_EXIST VALUE 'X',"CHECK FOR DATA
FG_SESSION_OPEN VALUE ''.
STRUCTURES AND INTERNAL TABLE DECLARATIONS
TYPES :BEGIN OF TY_PIR,
LIFNR TYPE EINA-LIFNR,
MATNR TYPE EINA-MATNR,
EKORG TYPE EINE-EKORG,
WERKS TYPE EINE-WERKS,
VERKF TYPE EINA-VERKF,"sales person
TELF1 TYPE EINA-TELF1,"telephone
URZLA TYPE EINA-URZLA,"country
REGIO TYPE EINA-REGIO,"region
APLFZ(5),"plan deleivery time
EKGRP TYPE EINE-EKGRP,"purchase group
NORBM(13),
NETPR(13),
END OF TY_PIR.
DATA : IT_PIR TYPE TABLE OF TY_PIR,
WA_PIR LIKE LINE OF IT_PIR.
DATA: BEGIN OF IT_BDCDATA.
INCLUDE STRUCTURE BDCDATA.
DATA END OF IT_BDCDATA.
DATA : BEGIN OF IT_BDCMSG.
INCLUDE STRUCTURE BDCMSGCOLL.
DATA END OF IT_BDCMSG.
SELECTION SCREEN
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETER : FNAME TYPE RLGRAP-FILENAME.
SELECTION-SCREEN END OF BLOCK B1.
AT SELECTION ON VALUE REQUEST
AT SELECTION-SCREEN ON VALUE-REQUEST FOR FNAME.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
PROGRAM_NAME = SYST-CPROG
DYNPRO_NUMBER = SYST-DYNNR
FIELD_NAME = ' '
IMPORTING
FILE_NAME = FNAME.
START OF SELECTION
START-OF-SELECTION.
PERFORM F_GET_DATA USING FNAME
CHANGING IT_PIR.
PERFORM F_GENERATE_DATASET USING FNAME
CHANGING IT_PIR WA_PIR.
*& Form F_GET_DATA
text
-->P_V_FNAME text
<--P_IT_PIR text
FORM F_GET_DATA USING P_FNAME LIKE FNAME
CHANGING P_IT_PIR LIKE IT_PIR.
DATA: LV_FILE TYPE STRING.
LV_FILE = FNAME.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = LV_FILE
FILETYPE = 'DAT'
HAS_FIELD_SEPARATOR = 'X'
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
IMPORTING
FILELENGTH =
HEADER =
TABLES
DATA_TAB = P_IT_PIR
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF P_IT_PIR IS INITIAL.
FG_DATA_EXIST = ''.
ENDIF.
ENDFORM. " F_GET_DATA
*& Form F_GENERATE_DATASET
text
-->P_V_FNAME text
<--P_IT_PIR text
FORM F_GENERATE_DATASET USING P_V_FNAME LIKE FNAME
CHANGING P_IT_PIR LIKE IT_PIR
P_WA_PIR LIKE WA_PIR.
MESSAGE I001(ZHNC).
*OPENING FILE AT THE APPLICATION SERVER FOR WRITING
OPEN DATASET FNAME FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
IF SY-SUBRC EQ 0.
MESSAGE I002(ZHNC).
LOOP AT P_IT_PIR INTO P_WA_PIR.
SPLIT P_WA_PIR AT '*' INTO P_WA_PIR-LIFNR
P_WA_PIR-MATNR
P_WA_PIR-EKORG
P_WA_PIR-WERKS
P_WA_PIR-VERKF
P_WA_PIR-TELF1
P_WA_PIR-URZLA
P_WA_PIR-REGIO
P_WA_PIR-APLFZ
P_WA_PIR-EKGRP
P_WA_PIR-NORBM.
*TRANSFER THE FILE FROM INTERNAL TABLE TO APPLICATION SERVER
MESSAGE I003(ZHNC).
TRANSFER P_WA_PIR TO FNAME.
ENDLOOP.
*CLOSING THE FILE AT THE APPLICATION SERVER
CLOSE DATASET FNAME.
ENDIF.Hello,
I made a similar program. You can have a look at it.
*& Form write_to_app_server
text
--> p1 text
<-- p2 text
FORM write_to_app_server.
To get filename
PERFORM get_filename.
To write into the application server
OPEN DATASET g_filename_with_path FOR OUTPUT IN TEXT MODE.
IF sy-subrc = 0.
LOOP AT <l_table> INTO <l_line>.
TRANSFER <l_line> TO g_filename_with_path.
ENDLOOP.
CLOSE DATASET g_filename_with_path.
ELSE.
CLOSE DATASET g_filename_with_path.
ENDIF.
To send mail
PERFORM send_mail.
ENDFORM. " write_to_app_server
*& Form get_filename
text
--> p1 text
<-- p2 text
FORM get_filename.
DATA : l_log_path TYPE filepath-pathintern
VALUE 'Y28M_DOWNLOADS_BACKGROUND' .
CALL FUNCTION 'FILE_GET_NAME_USING_PATH'
EXPORTING
client = sy-mandt
logical_path = l_log_path
operating_system = sy-opsys
file_name = p_fname
IMPORTING
file_name_with_path = g_filename_with_path
EXCEPTIONS
path_not_found = 1
missing_parameter = 2
operating_system_not_found = 3
file_system_not_found = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " get_filename
You may find it useful.
Regards,
Karuna. -
How to delete string or line from unix file(dataset) of application server
Hi All,
After transfer workarea information or all records into dataset(unix file). When I see the file in application server automatically the last line is shown a blank line. I am not passing any blank line.
I have tried for single record than also the file generates the last line(2nd line) also a blank line.
When I m reading the dataset, it is not reading the last blank line but why it is showing the last blank line?
How to delete string or line from unix file(dataset) of application server?
Please give your comments to resolve this.
Thanks
Tirumula Rao ChinniHi Rio,
I faced similar kind of issue working with files on UNIX platform.
The line is a line feed to remove it use
DATA : lv_carr_linefd TYPE abap_cr_lf VALUE cl_abap_char_utilities=>cr_lf.
DATA : lv_carr_return TYPE char1,
lv_line_feed TYPE char1.
lv_line_feed = lv_carr_linefd(1).
lv_carr_return = lv_carr_linefd+1(1).
Note: IMP: The character in ' ' is not space but is a special
character set by pressing ALT and +255 simultaneosly
REPLACE ALL OCCURRENCES OF lv_line_feed IN l_string WITH ' '.
REPLACE ALL OCCURRENCES OF lv_carr_return IN l_string WITH ' '. -
File from the Application server
Hi gurus,
I am working on a scenario where I need to get a file from the application server and for this I need to ask user to enter the location and that too at the selection screen and then I need to read this location using open data set and read data set in my program , once I am done with this I need to do some other validations. so can you please help me out how to achieve this.
Thanks
Rajeev GuptaHi
Declare the selection screen with file as parameter so that the user enter the application server file..
the use the OPEND DATASET as mentioned in below code and process
Refer this:
http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb3ca6358411d1829f0000e829fbfe/frameset.htm
ABAP code for uploading a TAB delimited file into an internal table. See code below for structures.
*& Report ZUPLOADTAB * &----
*& Example of Uploading tab delimited file *
REPORT zuploadtab .
PARAMETERS: p_infile LIKE rlgrap-filename
OBLIGATORY DEFAULT '/usr/sap/'..
DATA: ld_file LIKE rlgrap-filename.
*Internal tabe to store upload data
TYPES: BEGIN OF t_record,
name1 like pa0002-VORNA,
name2 like pa0002-name2,
age type i,
END OF t_record.
DATA: it_record TYPE STANDARD TABLE OF t_record INITIAL SIZE 0,
wa_record TYPE t_record.
*Text version of data table
TYPES: begin of t_uploadtxt,
name1(10) type c,
name2(15) type c,
age(5) type c,
end of t_uploadtxt.
DATA: wa_uploadtxt TYPE t_uploadtxt.
*String value to data in initially.
DATA: wa_string(255) type c.
constants: con_tab TYPE x VALUE '09'.
*If you have Unicode check active in program attributes then you will
*need to declare constants as follows:
*class cl_abap_char_utilities definition load.
*constants:
con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB.
*START-OF-SELECTION
START-OF-SELECTION.
ld_file = p_infile.
OPEN DATASET ld_file FOR INPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc NE 0.
ELSE.
DO.
CLEAR: wa_string, wa_uploadtxt.
READ DATASET ld_file INTO wa_string.
IF sy-subrc NE 0.
EXIT.
ELSE.
SPLIT wa_string AT con_tab INTO wa_uploadtxt-name1
wa_uploadtxt-name2
wa_uploadtxt-age.
MOVE-CORRESPONDING wa_uploadtxt TO wa_upload.
APPEND wa_upload TO it_record.
ENDIF.
ENDDO.
CLOSE DATASET ld_file.
ENDIF.
*END-OF-SELECTION
END-OF-SELECTION.
*!! Text data is now contained within the internal table IT_RECORD
Display report data for illustration purposes
loop at it_record into wa_record.
write:/ sy-vline,
(10) wa_record-name1, sy-vline,
(10) wa_record-name2, sy-vline,
(10) wa_record-age, sy-vline.
endloop.
Regards
Anji -
Upload tab-delimited file from the application server to an internal table
Hello SAPients.
I'm using OPEN DATASET..., READ DATASET..., CLOSE DATASET to upload a file from the application server (SunOS). I'm working with SAP 4.6C. I'm trying to upload a tab-delimited file to an internal table but when I try load it the fields are not correctly separated, in fact, they are all misplaced and the table shows '#' where supposedly there was a tab.
I tried to SPLIT the line using as separator a variable with reference to CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB but for some reason that class doesn't exist in my system.
Do you know what I'm doing wrong? or Do you know a better method to upload a tab-delimited file into an internal table?
Thank you in advance for your help.Try:
REPORT ztest MESSAGE-ID 00.
PARAMETER: p_file LIKE rlgrap-filename OBLIGATORY.
DATA: BEGIN OF data_tab OCCURS 0,
data(4096),
END OF data_tab.
DATA: BEGIN OF vendor_file_x OCCURS 0.
* LFA1 Data
DATA: mandt LIKE bgr00-mandt,
lifnr LIKE blf00-lifnr,
anred LIKE blfa1-anred,
bahns LIKE blfa1-bahns,
bbbnr LIKE blfa1-bbbnr,
bbsnr LIKE blfa1-bbsnr,
begru LIKE blfa1-begru,
brsch LIKE blfa1-brsch,
bubkz LIKE blfa1-bubkz,
datlt LIKE blfa1-datlt,
dtams LIKE blfa1-dtams,
dtaws LIKE blfa1-dtaws,
erdat LIKE lfa1-erdat,
ernam LIKE lfa1-ernam,
esrnr LIKE blfa1-esrnr,
konzs LIKE blfa1-konzs,
ktokk LIKE lfa1-ktokk,
kunnr LIKE blfa1-kunnr,
land1 LIKE blfa1-land1,
lnrza LIKE blfa1-lnrza,
loevm LIKE blfa1-loevm,
name1 LIKE blfa1-name1,
name2 LIKE blfa1-name2,
name3 LIKE blfa1-name3,
name4 LIKE blfa1-name4,
ort01 LIKE blfa1-ort01,
ort02 LIKE blfa1-ort02,
pfach LIKE blfa1-pfach,
pstl2 LIKE blfa1-pstl2,
pstlz LIKE blfa1-pstlz,
regio LIKE blfa1-regio,
sortl LIKE blfa1-sortl,
sperr LIKE blfa1-sperr,
sperm LIKE blfa1-sperm,
spras LIKE blfa1-spras,
stcd1 LIKE blfa1-stcd1,
stcd2 LIKE blfa1-stcd2,
stkza LIKE blfa1-stkza,
stkzu LIKE blfa1-stkzu,
stras LIKE blfa1-stras,
telbx LIKE blfa1-telbx,
telf1 LIKE blfa1-telf1,
telf2 LIKE blfa1-telf2,
telfx LIKE blfa1-telfx,
teltx LIKE blfa1-teltx,
telx1 LIKE blfa1-telx1,
xcpdk LIKE lfa1-xcpdk,
xzemp LIKE blfa1-xzemp,
vbund LIKE blfa1-vbund,
fiskn LIKE blfa1-fiskn,
stceg LIKE blfa1-stceg,
stkzn LIKE blfa1-stkzn,
sperq LIKE blfa1-sperq,
adrnr LIKE lfa1-adrnr,
mcod1 LIKE lfa1-mcod1,
mcod2 LIKE lfa1-mcod2,
mcod3 LIKE lfa1-mcod3,
gbort LIKE blfa1-gbort,
gbdat LIKE blfa1-gbdat,
sexkz LIKE blfa1-sexkz,
kraus LIKE blfa1-kraus,
revdb LIKE blfa1-revdb,
qssys LIKE blfa1-qssys,
ktock LIKE blfa1-ktock,
pfort LIKE blfa1-pfort,
werks LIKE blfa1-werks,
ltsna LIKE blfa1-ltsna,
werkr LIKE blfa1-werkr,
plkal LIKE lfa1-plkal,
duefl LIKE lfa1-duefl,
txjcd LIKE blfa1-txjcd,
sperz LIKE lfa1-sperz,
scacd LIKE blfa1-scacd,
sfrgr LIKE blfa1-sfrgr,
lzone LIKE blfa1-lzone,
xlfza LIKE lfa1-xlfza,
dlgrp LIKE blfa1-dlgrp,
fityp LIKE blfa1-fityp,
stcdt LIKE blfa1-stcdt,
regss LIKE blfa1-regss,
actss LIKE blfa1-actss,
stcd3 LIKE blfa1-stcd3,
stcd4 LIKE blfa1-stcd4,
ipisp LIKE blfa1-ipisp,
taxbs LIKE blfa1-taxbs,
profs LIKE blfa1-profs,
stgdl LIKE blfa1-stgdl,
emnfr LIKE blfa1-emnfr,
lfurl LIKE blfa1-lfurl,
j_1kfrepre LIKE blfa1-j_1kfrepre,
j_1kftbus LIKE blfa1-j_1kftbus,
j_1kftind LIKE blfa1-j_1kftind,
confs LIKE lfa1-confs,
updat LIKE lfa1-updat,
uptim LIKE lfa1-uptim,
nodel LIKE blfa1-nodel.
DATA: END OF vendor_file_x.
FIELD-SYMBOLS: <field>,
<field_1>.
DATA: delim TYPE x VALUE '09'.
DATA: fld_chk(4096),
last_char,
quote_1 TYPE i,
quote_2 TYPE i,
fld_lth TYPE i,
columns TYPE i,
field_end TYPE i,
outp_rec TYPE i,
extras(3) TYPE c VALUE '.,"',
mixed_no(14) TYPE c VALUE '1234567890-.,"'.
OPEN DATASET p_file FOR INPUT.
DO.
READ DATASET p_file INTO data_tab-data.
IF sy-subrc = 0.
APPEND data_tab.
ELSE.
EXIT.
ENDIF.
ENDDO.
* count columns in output structure
DO.
ASSIGN COMPONENT sy-index OF STRUCTURE vendor_file_x TO <field>.
IF sy-subrc <> 0.
EXIT.
ENDIF.
columns = sy-index.
ENDDO.
* Assign elements of input file to internal table
CLEAR vendor_file_x.
IF columns > 0.
LOOP AT data_tab.
DO columns TIMES.
ASSIGN space TO <field>.
ASSIGN space TO <field_1>.
ASSIGN COMPONENT sy-index OF STRUCTURE vendor_file_x TO <field>.
SEARCH data_tab-data FOR delim.
IF sy-fdpos > 0.
field_end = sy-fdpos + 1.
ASSIGN data_tab-data(sy-fdpos) TO <field_1>.
* Check that numeric fields don't contain any embedded " or ,
IF <field_1> CO mixed_no AND
<field_1> CA extras.
TRANSLATE <field_1> USING '" , '.
CONDENSE <field_1> NO-GAPS.
ENDIF.
* If first and last characters are '"', remove both.
fld_chk = <field_1>.
IF NOT fld_chk IS INITIAL.
fld_lth = strlen( fld_chk ) - 1.
MOVE fld_chk+fld_lth(1) TO last_char.
IF fld_chk(1) = '"' AND
last_char = '"'.
MOVE space TO fld_chk+fld_lth(1).
SHIFT fld_chk.
MOVE fld_chk TO <field_1>.
ENDIF. " for if fld_chk(1)=" & last_char="
ENDIF. " for if not fld_chk is initial
* Replace "" with "
DO.
IF fld_chk CS '""'.
quote_1 = sy-fdpos.
quote_2 = sy-fdpos + 1.
MOVE fld_chk+quote_2 TO fld_chk+quote_1.
ELSE.
MOVE fld_chk TO <field_1>.
EXIT.
ENDIF.
ENDDO.
<field> = <field_1>.
ELSE.
field_end = 1.
ENDIF.
SHIFT data_tab-data LEFT BY field_end PLACES.
ENDDO.
APPEND vendor_file_x.
CLEAR vendor_file_x.
ENDLOOP.
ENDIF.
CLEAR data_tab.
REFRESH data_tab.
FREE data_tab.
Rob -
Error while extracting XML file from the application server
Hi ,
I am writing a XML file into the application server, after which when i try to extract the file to the local server using the report - RFASLDPC ,
the file is extracted, but with a '#' symbol at the first position.
Because of which the XML File does not open. But after i open the file in notepad and manually delete the '#' symbol and then reopen the file, it works fine.
Is there any way to remove the '#' symbol while extracting itself ??
Thanks in advance,
Vikas.Select the option "No Character Set Conversion" in stead of Code page 1100.
However, I still have troubles -> the downloaded xml file misses a space on several places. This causes errors too. -
Printing files on the application server
Hi,
I am looking for ways to print files residing on the application server. Do you know of any function modules/transaction code that can do this?
Here is my situation:
I am using GRAPH_PRINT_POSTSCRIPT_FILE to print postscript file to the printer. I have no problem using this FM. The issue is that this function only prints files residing on the PC/local computer. It doesn't print any files on the application server.
Thanks in advance for any help you can provide.Hi,
use
CALL FUNCTION 'F4_DXFILENAME_4_DYNP'
EXPORTING
dynpfield_filename = 'P_FNAME'
dyname = 'ZFILE_HELP'
dynumb = sy-dynnr
filetype = 'P'
location = 'A'.
Thanks,
NN. -
Issue: XML File Downloading to Application Server
Hi All,
I am experiencing an issue downloading an XML File to the Application Server.
I'm using FM SAP_CONVERT_TO_XML_FORMAT to convert SAP data to XML Format.
After getting the XML data into XMLTAB, I'm using:
OPEN DATASET pfile_fs FOR OUTPUT IN BINARY MODE .
LOOP AT xmltab INTO xmltab_w.
TRANSFER xmltab_w TO pfile_fs.
CLEAR xmltab_w.
ENDLOOP.
CLOSE DATASET pfile_fs.
The xml file is downloaded show an Error in 'XML page cannot be displayed
Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later.
Invalid at the top level of the document. Error processing resource 'file:/shared/TEST/2009'
But when i download xml file using the FM WS_Download , the XML page has no errors .
I am unable to figure out what could be the issue, If this issue is due to some characters like Chinese or Japanese then .. is there any solution for this .
Please, give me your valuable suggestions.
Thank you,
PraseadDear Prasead,
Hope things are good at your end, i have got the same issue as well, could you please care to share the solution...Wud be of a gr8 help if you could do that, hope to have your response back.
Regards,
Abdul.
Maybe you are looking for
-
CUPC 8.6.3/Presence 8.5.2 Incoming call window does not appear
Updated CUPC client to 8.6.3 on a Windows 7 32-bit workstation. When a incoming call is placed, the incoming call windows to answer or send to VM is not appearing. On the Show server health from the Help menu is showing all green. Is there a setti
-
"Print Settings" are not stored in the print preset
Hi everybody, It seems that, no matter how many times i save and update the profile, all the print setting (image size, sharpening, bit depth, color management, ...) are store within the preset, all but the Epson Driver settings, which have to be sel
-
GuiXT for projects - to call application within transaction
Hi I'm using GuiXT for screen modifications and field layouts. I'm using Project Builder CJ20n. Everytime when i want to give a settlement rule to the WBS element within project i need to select the WBS element, g oto Edit --> Cost --> Settlement Rul
-
Cann't download from app store any more
can't download from the app store anymore ........every time i try to download free app .......it goes to home page then the app shows with waiting ......but dont start with the download
-
[solved] amarok stopped playing mp3's
EDIT: using Xine backend phonon with no problem, except now I have no system notfication sounds, Ah well. I have my system updated. Amarok will not play mp3's, although it will play flac's. I started "amarok --debug" and I see: amarok: [EngineControl