File deleted but no instance created

Hi,
I have created a process using a file adpter to read files and a FTP adapter to put the file. File adpeter is configured to delete the files after reading.
The process deletes the files after reading. However, there is no instance created for the process and there is no file put to the FTP location.
This phenomenon is happening only when the FTP information in the oc4j-ra.xml is:
<connector-factory location="eis/FtpAdapter" connector-name="FTP Adapter">
<config-property name="host" value="xxx.xxx.xxx.xxx"/>
<config-property name="port" value="21"/>
<config-property name="username" value="xxxxxxx"/>
<config-property name="password" value="xxxxxxx"/>
<config-property name="serverLineSeparator" value="\n"/>
<config-property name="serverLocaleLanguage" value=""/>
<config-property name="serverLocaleCountry" value=""/>
<config-property name="serverLocaleVariant" value=""/>
<config-property name="serverEncoding" value=""/>
<config-property name="useFtps" value="true"/>
<config-property name="walletLocation" value=""/>
<config-property name="walletPassword" value=""/>
<config-property name="channelMask" value="both"/>
<config-property name="securePort" value="990"/>
</connector-factory>
The above configuration is wrong. However, if the files are getting deleted from the source location, then we should as well get the instance created with the an errored state.
Message was edited by:
user486065
Message was edited by:
user486065

Without seeing logs I can't help you. But I bet there was an exception which rollbacked the whole transaction, even the audit trail. Therefore you don't see instance in BPEL console (and because file and ftp are non transactional adapters you ended in inconsistent state).
this can be caused by fact that your BPEL process is synchronous and you defined probably inMemoryOptimization to true. Which is valid just for synchronous (or transient) processes and basicaly it improves performance, because process is not dehydrated (it depends on completionPersistPolicy parameter). If inMemoryOptimization is false then this is good candidate for further investigation.
completionPersistPolicy says in which cases it should save audit trail.
and completionPersistLevel says how much data should be saved.
Have a look into BPEL admin guide for further explanations, because this was very-very lighweight explanation. http://www.oracle.com/technology/products/ias/bpel/documents/bpel_admin_10.1.3.1.0.pdf
But don't forget to check logs (you may check log4j logging level for your BPEL engine).

Similar Messages

Okay, i have 2 bugs with maverick. First, when I delete a file within a window, the files deletes but the preview doesn't delete until I close the window and reopen it. Second, I work on a network of computers and the search feature is now buggy...

Okay, i have 2 bugs with maverick. First, when I delete a file within a window, the files deletes but the preview doesn't delete until I close the window and reopen it. Second, I work on a network of computers and the search feature is now buggy... When I search for a file, A) it asks me if it's a name, or it wont produce anything, and B), its slower than in prior OS versions and in some instances I have to toggle to a different directory and go back to my original directory in the search: menu bar or the search wont produce anything... Very buggy.

It appears to me that network file access is buggy in Maverick.
In my case I have a USB Drive attached to airport extreme (new model) and when I open folders on that drive they all appear empty. If I right click and I select get info after a few minutes! I get a list of the content.
It makes impossible navigate a directory tree.
File access has been trashed in Maverick.
They have improved (read broken) Finder. I need to manage a way to downgrade to Lion again.

HT204053 best storage for filies deleted but used frequently wd drop box flash drive

best storage for filies deleted but used frequently wd drop box flash drive

Thanks LowLuster! With that info I have another questions if that's ok. First, I'm sure it's formatted to fat32. I have learned I can't transfer movies over 4gb. I use an external hard drive for those. The files are ones I've downloaded from YouTube in the mp4 format and are never over 1gb. They're all mb in size.
I didn't realize flash drives had limited writes. Is there any way to confirm I've reached the limit? Both times I reformatted it I was able to add back the videos I previously had on it. I would say there were a hundred or so. Both times I left some "growing room" on the flash drive so I could add more files. And, both times I was able to continuing adding until I had reached the max capacity. The problem occured after I tried deleting files to free up space. Does this make sense with "the amount you have used it" theory? Does it start to become buggy at that point, or does it just make writes to the drive impossible?
Thanks

5800:Files deleted, but still on the list

Help me please,
I'm a 5800 XM 'tube' user. Everything went well for a while, until I decided to connect my phone to a PC without PC Suite, and instead use the phone in mass storage mode.
I've deleted all image files in the memory card (the ones in the \Images\Backgrounds\).
As the result, the files are no longer exist in the memory card, but still exist in the image list everytime I open the Gallery. The icon of the file is like music note, and when I tap it, all of them (actually 37 of them all) would have the same name, which is one of the title of my song in the Music folder.
I can't delete them, I can't open them, in fact, nothing could be done to them. When I tried to do anything to them (like delete it), the icon will change into a 'key'.
So I'm stuck with these imaginary files that the phone thinks that I have.
So my question is:
How do I refresh the library of my Images like the way I refresh my Music Library? Isn't it suppose to be auto
refresh like in the real player file list?
I've tried to shut the phone down. No change.
I've tried to remove the memory card and put it back again. No result.
I've put back all the files like the way it used to be before I delete them. No can do.
I've transfer all my images and videos to my PC (this time using PC Suite) and deleted all files in the memory card. And voila! the gallery only consists of 37 imaginary files.
I suppose I have to format the memory card to be able to get rid of it, but is it true? What if after I format it, I get blank memory card of 8 GB with 37 imaginary files. Who knows?
Where is the file that consists of the list of the image files. If I delete the list file, will it solve the problem?
So, anyone with any suggestion, please help me?
I know I can just ignore it, but isn't a phone as sophisticated as the 'tube' should do better than that?
Thank you.

gimm wrote:
It worked but what if the files are in my phone and not in my memory card? Thanks...
Message Edited by gimm on 03-Oct-2009 05:24 AM
Unfortunately you will have to format your phone.
Before perfoming this please take a backup of your data.
Factory defaults-
Type *#7780# on your standby screen.
This will reset all your setting to default factory settings. User data wont be affected.
Soft reset-
Type *#7370#
This will reset the phone as well delete user data. Use when want to format the phone.
If none of these worked then you might want to do a hard reset.
For this you have to-
1. Switch off the phone.
2. Hold down the following three buttons: Green (the call answer button), * button, and '3' button.( Just in case of N78 it will be the multimedia key the small silver key on right side & for Nokia 5800XM - use the following buttons to do a hard reset, GREEN/RED/CAMERA keys pressed all at once on power up. this will only work on 5800's that have firmware version 20... and up. For Nokia N97 is SHIFT /SPACE BAR / BACKSPACE. )
3. While holding these buttons, hold the power button to switch on the phone.
4. Release the buttons when the phone shows the nokia hands logo or shows other signs of life like the language selection screen.
Message Edited by blueheartz on 03-Oct-2009 12:38 PM
Please thank me by giving 'KUDOS' star. It will help me to serve you better.
Currently using N82 and 5230. Next would be N?

File sent but no rows created in RFC

File - RFC
I can see no errors in the MM,
no errors in receiver adapter
receiver side CC is showing Green
the file is sent succesfully but I dont see any rows created in my RFC
help !!!!!
regards,
Nikhil.

do u mean to say that you have no errors in the both the sender and receiver channels in CC monitoring?
checked by executing the code directly. does it create the rows?
have you done the content conversion on the sender side? if not:
this can help u:
http://help.sap.com/saphelp_nw04/helpdata/en/ae/d03341771b4c0de10000000a1550b0/frameset.htm

Files deleted, but still taking up disc space.

When I delete files from my ext HD or USB flash drive the files are no longer visible but they're still using the disc space. I deleted everything from my 1G flash drive this morning, it was full, to be able to put different files on it and when I started adding the files I got a message telling me that there was no room left on the drive. The info bar at the bottom of the window even showed that there was only a small amount of disc space left, but there were no files to be found. I'm still in the process of the PC to Mac switch so I still have my old PC and use it from time to time. In order to completely delete these files I have to plug it in to the PC and delete them there. Only then is the drive actually empty. The same thing happens with external HD. Will I have to continue to be tied to my PC because if this or can this be fixed.
Thanks for any help.
Chris

Hi Matt, I haven't tried that with the flash drive yet but I did with the ext HD a couple of weeks ago and it wouldn't let me because it said the the files were locked, I even tried the "sudo rm -rf ~/.Trash/*" command in the terminal and it still wouldn't allow me to empty the trash, I didn't have the proper authority or something like that. That's when I discovered that once I ejected the HD the trash was suddenly empty. I plugged it in to the PC and emptied the "Trashes" folder, and back to the Mac and they were gone. Could it have something to do with the fact that these files, mostly music files but some PDFs and Word files, are coming from a PC, even though they're all Mac compatible?

Workflow triggered.. But no instance created for BO.. !

Hi.. I am triggering a workflow.. its been successful but the BO instance not been created..
The workflow object is not-set.. !
Any idea how to solve this.. ?
Cheers

Hi Mate.. Thanks for that..
When I check the workflow container it says <No Instance> for the BO ZBUS2075.. Which I copied from BUS2075 and add a event to it..
Its triggering a event from that BO.. but there is no instance of that object available in workflow container..
The Key Field status <Not Set>
Not sure is something with BO I need to activate.. ?
Cheers

InDesign file Opens but can't create working IDML File

Hello all, I'm working on an a Mac OS X system and have an InDesign CS4 file (originally created on a PC) that opens without any problems. When I try to export an IDML from this InDesign file, the IDML makes InDesign crash when trying to open it. I have also tried exporting an INX and come across the same problem. I have narrowed it down and it appears that the problme has to do with the Master pages. Does anyone have any suggestions/guesses what the issue may be?

Well, you have the IDML file, so your problem is trivial! Divide and Conquer!
Just keep removing portions of the IDML file until you find the problem! Then inspect carefully or post a small excerpt.
Are you running 7.0.4? It fixed a lot of IDML export problems, though I don't know about import problems.
What does the thread0 section of your crash report look like?

Why file.delete() won't work?

I looked throught the forum and I have seen that my problem isn't the most uncommon one. I'm trying to delete a file using file.delete().But it always return false. I have used the file for reading(and sometimes writing) before but I have closed the stream, I have checked that many time ;).
This has me a little confused. The file ins't write protected either. Is there perhaps anyway to close all streams assosiated with a certain file?

     try {
            boolean success = (new File(currentFile)).delete();
            if (!success) {
               statusLabel.setText("Error");
            readPatients();
         catch (SecurityException se) {
            System.out.print(se);
         }Should work, shouldn't it?

REST API: Create Deployment throwing error BadRequest (The specified configuration settings for Settings are invalid. Verify that the service configuration file is a valid XML file, and that role instance counts are specified as positive integers.)

Hi All,
We are trying to access the Create Deployment method stated below
http://msdn.microsoft.com/en-us/library/windowsazure/ee460813
We have uploaded the Package in the blob and browsing the configuration file. We have checked trying to upload manually the package and config file in Azure portal and its working
fine.
Below is the code we have written for creating deployment where "AzureEcoystemCloudService" is our cloud service name where we want to deploy our package. I have also highlighted the XML creation
part.
byte[] bytes =
new byte[fupldConfig.PostedFile.ContentLength + 1];
            fupldConfig.PostedFile.InputStream.Read(bytes, 0, bytes.Length);
string a = Encoding.UTF8.GetString(bytes, 0, bytes.Length);
string base64ConfigurationFile = a.ToBase64();
X509Certificate2 certificate =
CertificateUtility.GetStoreCertificate(ConfigurationManager.AppSettings["thumbprint"].ToString());
HostedService.CreateNewDeployment(certificate,
ConfigurationManager.AppSettings["SubscriptionId"].ToString(),
"2012-03-01", "AzureEcoystemCloudService", Infosys.AzureEcosystem.Entities.Enums.DeploymentSlot.staging,
"AzureEcoystemDeployment",
"http://shubhendustorage.blob.core.windows.net/shubhendustorage/Infosys.AzureEcoystem.Web.cspkg",
"AzureEcoystemDeployment", base64ConfigurationFile,
true, false);
<summary>
/// </summary>
/// <param name="certificate"></param>
/// <param name="subscriptionId"></param>
/// <param name="version"></param>
/// <param name="serviceName"></param>
/// <param name="deploymentSlot"></param>
/// <param name="name"></param>
/// <param name="packageUrl"></param>
/// <param name="label"></param>
/// <param name="base64Configuration"></param>
/// <param name="startDeployment"></param>
/// <param name="treatWarningsAsError"></param>
public static
void CreateNewDeployment(X509Certificate2 certificate,
string subscriptionId,
string version, string serviceName, Infosys.AzureEcosystem.Entities.Enums.DeploymentSlot deploymentSlot,
string name, string packageUrl,
string label, string base64Configuration,
bool startDeployment, bool treatWarningsAsError)
Uri uri = new
Uri(String.Format(Constants.CreateDeploymentUrlTemplate, subscriptionId, serviceName, deploymentSlot.ToString()));
XNamespace wa = Constants.xmlNamespace;
XDocument requestBody =
new XDocument();
String base64ConfigurationFile = base64Configuration;
String base64Label = label.ToBase64();
XElement xName = new
XElement(wa + "Name", name);
XElement xPackageUrl =
new XElement(wa +
"PackageUrl", packageUrl);
XElement xLabel = new
XElement(wa + "Label", base64Label);
XElement xConfiguration =
new XElement(wa +
"Configuration", base64ConfigurationFile);
XElement xStartDeployment =
new XElement(wa +
"StartDeployment", startDeployment.ToString().ToLower());
XElement xTreatWarningsAsError =
new XElement(wa +
"TreatWarningsAsError", treatWarningsAsError.ToString().ToLower());
XElement createDeployment =
new XElement(wa +
"CreateDeployment");
            createDeployment.Add(xName);
            createDeployment.Add(xPackageUrl);
            createDeployment.Add(xLabel);
            createDeployment.Add(xConfiguration);
            createDeployment.Add(xStartDeployment);
            createDeployment.Add(xTreatWarningsAsError);
            requestBody.Add(createDeployment);
            requestBody.Declaration =
new XDeclaration("1.0",
"UTF-8", "no");
XDocument responseBody;
RestApiUtility.InvokeRequest(
                uri, Infosys.AzureEcosystem.Entities.Enums.RequestMethod.POST.ToString(),
HttpStatusCode.Accepted, requestBody, certificate, version,
out responseBody);
<summary>
/// A helper function to invoke a Service Management REST API operation.
/// Throws an ApplicationException on unexpected status code results.
/// </summary>
/// <param name="uri">The URI of the operation to invoke using a web request.</param>
/// <param name="method">The method of the web request, GET, PUT, POST, or DELETE.</param>
/// <param name="expectedCode">The expected status code.</param>
/// <param name="requestBody">The XML body to send with the web request. Use null to send no request body.</param>
/// <param name="responseBody">The XML body returned by the request, if any.</param>
/// <returns>The requestId returned by the operation.</returns>
public static
string InvokeRequest(
Uri uri,
string method,
HttpStatusCode expectedCode,
XDocument requestBody,
X509Certificate2 certificate,
string version,
out XDocument responseBody)
            responseBody =
null;
string requestId = String.Empty;
HttpWebRequest request = (HttpWebRequest)HttpWebRequest.Create(uri);
            request.Method = method;
            request.Headers.Add("x-ms-Version", version);
            request.ClientCertificates.Add(certificate);
            request.ContentType =
"application/xml";
if (requestBody != null)
using (Stream requestStream = request.GetRequestStream())
using (StreamWriter streamWriter =
new StreamWriter(
                        requestStream, System.Text.UTF8Encoding.UTF8))
                        requestBody.Save(streamWriter,
SaveOptions.DisableFormatting);
HttpWebResponse response;
HttpStatusCode statusCode =
HttpStatusCode.Unused;
try
response = (HttpWebResponse)request.GetResponse();
catch (WebException ex)
// GetResponse throws a WebException for 4XX and 5XX status codes
                response = (HttpWebResponse)ex.Response;
try
                statusCode = response.StatusCode;
if (response.ContentLength > 0)
using (XmlReader reader =
XmlReader.Create(response.GetResponseStream()))
                        responseBody =
XDocument.Load(reader);
if (response.Headers !=
null)
                    requestId = response.Headers["x-ms-request-id"];
finally
                response.Close();
if (!statusCode.Equals(expectedCode))
throw new
ApplicationException(string.Format(
"Call to {0} returned an error:{1}Status Code: {2} ({3}):{1}{4}",
                    uri.ToString(),
Environment.NewLine,
                    (int)statusCode,
                    statusCode,
                    responseBody.ToString(SaveOptions.OmitDuplicateNamespaces)));
return requestId;
But every time we are getting the below error from the line
response = (HttpWebResponse)request.GetResponse();
<Error xmlns="http://schemas.microsoft.com/windowsazure" xmlns:i="http://www.w3.org/2001/XMLSchema-instance">
<Code>BadRequest</Code>
<Message>The specified configuration settings for Settings are invalid. Verify that the service configuration file is a valid XML file, and that role instance counts are specified as positive integers.</Message>
</Error>
Any help is appreciated.
Thanks,
Shubhendu

Please find the request XML I have found it in debug mode
<CreateDeployment xmlns="http://schemas.microsoft.com/windowsazure">
<Name>742d0a5e-2a5d-4bd0-b4ac-dc9fa0d69610</Name>
<PackageUrl>http://shubhendustorage.blob.core.windows.net/shubhendustorage/WindowsAzure1.cspkg</PackageUrl>
<Label>QXp1cmVFY295c3RlbURlcGxveW1lbnQ=</Label>
<Configuration>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</Configuration>
<StartDeployment>true</StartDeployment>
<TreatWarningsAsError>false</TreatWarningsAsError>
</CreateDeployment>
Shubhendu G

Trying to delete file from trash but get this: The operation can't be completed because the item "File name" is in use. All other files delete except this one. Please help

Trying to delete file from trash but get this: The operation can’t be completed because the item “File name” is in use. All other files delete except this one. Please help

Maybe some help here:
http://osxdaily.com/2012/07/19/force-empty-trash-in-mac-os-x-when-file-is-locked -or-in-use//

How do i delete Older files from the directory before create a new file?

Hi,
How do i delete older files in a particular directory,
the senorio is count the number of .txt files in a directory and delete the older files if file count is more than 10. (if i add 11th file the very first file has to be deleted)
i have written the code to count the files and delete , but it is deleting all the files instead of older file
public class ExtensionFilter implements FilenameFilter {
private String extension;
public ExtensionFilter( String extension ) {
    this.extension = extension;
public boolean accept(File dir, String name) {
    return (name.endsWith(extension));
public class FileUtils{
public static void main(String args[]) throws Exception {
    FileUtils.deleteFiles("c:/countfile/", ".txt");
public static void deleteFiles( String directory, String extension ) {
    ExtensionFilter filter = new ExtensionFilter(extension);
    File dir = new File(directory);
    String[] list = dir.list(filter);
    File file;
    if (list.length == 0) return;
    for (int i = 0; i < list.length; i++) {
      //file = new File(directory + list);
file = new File(directory, list[i]);
if ((list[i]).length()>=10)
     System.out.print(file + " deleted : " + file.delete());
Thanks,
Jamin Rosina

What your code is doing now, is deleting all filenames that are longer than 10 characters.
Your problem lies in the line:
if ((list).length()>=10)

I have files that may have been created in various versions of Illustrator. We need to be able to open them, but all we have is CS6 suite. I have called and been told that "technicians at adobe" could perform a paid service to find out what the files were

I have files that may have been created in various versions of Illustrator. We need to be able to open them, but all we have is CS6 suite. I have called and been told that "technicians at adobe" could perform a paid service to find out what the files were created in and get them to be useable in InDesign 6, but I'd need an email address that was registered to our software to give the help desk person. After finding the correct email address, different adobe help number people told me to come here to ask as there is no phone support. Can anyone get me to an adobe technician that can provide a price quote for finding out what created these files and for getting them converted? Thanks.

Sorry, I understood you to say you had the whole CS6 suite, which includes Illustrator.
As far as finding out what the files are, sometimes you can look at them in a text editor to figure this out. See below; the, Creator Tool line. Not every software package makes it this easy, though.

Java.io.File.delete worked in 1.1, 1.2, 1.3 & 1.4, but not in 5.0

I have a logging utility I wrote originally in Java 1.0. A nightly housekeeping task runs which creates a ZIP file for the previous days log, then deletes the .log file. If I run this software with Java 5.0, the File.delete fails and the .LOG file remains on the disk. No exceptions are thrown. delete just returns false.
Any ideas?

to find a bug this basic! Each day I switch to a new log file, leaving the previous days file. I was never closing the old PrintStream... Jees... How embarrassing.

I have moved old Back Up files from my external hard drive to the trash and as the Trash previews the files, i.e. counts them (over 850,000 files) it then begins to delete but then stops. Is it possible to move the files out of the Trash file and then onl

I have moved old Back Up files from my external hard drive to the trash and as the Trash previews the files, i.e. counts them (over 850,000 files) it then begins to delete but then stops. Is it possible to move the files out of the Trash file and then only delete a small amount at one time?

See
Deleting backups via the Finder on Lion 10.7.x or later:
http://pondini.org/TM/12.html
Hold option (alt) while emptying the Trash.
See also
http://pondini.org/TM/E6.html
Message was edited by: WZZZ

File deleted but no instance created

Similar Messages

Maybe you are looking for