File/FTP to ABAP Proxy (file as attachment)

I have the following scenario: File/FTP -> XI -> ABAP Proxy but not the normal case. What I need is the picked file as attachment and the file name. I hope this is possible.
I have found the following blogs:
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
/people/michal.krawczyk2/blog/2006/04/19/xi-rfc-or-abap-proxy-abap-proxies-with-attachments
I have no idea where I have to start. How I should define the sender and receiver message interface? How I have to configure the sender file/ftp adapter?
I'm using PI 7.1 SP 7.

At the moment I have the following problem. I always get an error during mapping the request message. This is the error message:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_MT_SCANFILE_to_MT_SAP_SCANFILE_</SAP:P1>
<SAP:P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException:</SAP:P2>
<SAP:P3>Fatal Error: com.sap.engine.lib.xml.parser.ParserE</SAP:P3>
<SAP:P4>xception: XMLParser: No data allowed here: (hex) ~</SAP:P4>
<SAP:AdditionalText />
<SAP:Stack>Während des Anwendungs-Mappings com/sap/xi/tf/_MT_SCANFILE_to_MT_SAP_SCANFILE_ ist eine RuntimeException aufgetreten. com.sap.aii.utilxi.misc.api.BaseRuntimeException:Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XMLParser: No data allowed here: (hex) ~</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
And if I use transaction sxmb_moni I see that the payload MainDocument is my pdf document and I can read it.
MG%PDF-1.3
%âãÏÓ
2 0 obj
/WinAnsiEncoding
endobj
3 0 obj
<<
%Devtype POST2 Font COURIER normal Lang DE
/Type /Font
/Subtype /Type1
/BaseFont /Courier
/Name /F001
/Encoding 2 0 R
>>
endobj
4 0 obj
<<
/Length 5 0 R
u2026.
I believe there is still an error at my communication channel configuration of the ftp sender adapter.

Similar Messages

Interface ABAP Proxy - File - Synchronous - (Is it possible???)

Hi Experts,
I want execute ABAP Proxy which will create File in FTP. On final, i need return "OK" information to the ABAP Proxy.
Is it possible? ABAP Proxy <-> File Synchronous? Without BPM and Custom Module Adapter. Just using RequestResponseBean???
Tks in advance.

Hi Raj,
Tks. I implemented the Acknowledgements Request and changed the ABAP Proxy to Async. But the Ack returns to the ECC with the error and is not saved in the Message. The error follows below:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>

<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="PERSIST">REQUEST_MESSAGE_NOT_FOUND</SAP:Code>
<SAP:P1>4EE24DEB4EA60650E10080000A09071E</SAP:P1>
<SAP:P2>CENTRAL</SAP:P2>
<SAP:P3></SAP:P3>
<SAP:P4></SAP:P4>
<SAP:AdditionalText></SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace=""></SAP:ApplicationFaultMessage>
<SAP:Stack>Requisição mensagem 4EE24DEB4EA60650E10080000A09071E pipeline CENTRAL versão desconhecida</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Any Idea about this error?
Tks in advance.

FILE TO INBOUND ABAP PROXY - " LOOP_IN_MESSAGE_ROUTING ERROR "

Hi ,
Getting the following Error in *FILE TO INBOUND ABAP PROXY* which is updating a Database table in R/3.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIProtocol</SAP:Category>
<SAP:Code area="MESSAGE">LOOP_IN_MESSAGE_ROUTING</SAP:Code>
<SAP:P1>is.01.lgscms</SAP:P1>
<SAP:P2>IS</SAP:P2>
<SAP:P3>XI</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>XI protocol error</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
How to rectify the Error..
Regards,
Ravi

Hi Ravi !
Check if the url for the receiver is
http://<host>:<port>/sap/xi/engine?type=receiver
or
http://<host>:<port>/sap/xi/engine?type=entry
if using XI 3.0
Regards,
Matias.
Edited by: Matias Denker on Feb 25, 2008 2:12 PM

FILE TO INBOUND ABAP PROXY - error

Hi,
Getting the following Error in FILE TO INBOUND ABAP PROXY which is updating a Database table in R/3.
Error:
com.sap.aii.utilxi.misc.api.BaseRuntimeException
thrown during application mapping
com/sap/xi/tf/_file2proxy_mm_: RuntimeException in
Message-Mapping transformatio~
How to rectify the error...
Ravi

Hi,
The error mentioned is indicating about the Message Mapping error.
I think you need to test your Message Mapping with test tab.
Here Goto SXMB_Moni and select the related message and double click on it.
It will show you the various steps in Message flow.
Take the Inbound Message and look for Payload in it. Open it in right side window and right click on it to see source code.
Copy it in Message Mapping and test it
Thanks
swarup

File to server abap proxy

in my file to server abap proxy scenario,<b>filexisap .</b>
i have some doubt in configuration part.
i have to create one http destination but not clear where it should be created?in xi or in sap system??

Hi
you can either key in the Details of the R3 system in the XI adapter directly or you can maintain a HTTP destination on your XI in SM59 and use this in the XI adaper.
regards
krishna

Problem receiving acknowledgement: abap proxy == file adapter

Hi experts,
I am developing an asynchrone interface using PI 7.0. The scenario is: SAP ==> FILE.
In SAP I have created an abap proxy in wich I requested an acknowledgement when calling from the abap code. In PI I have created an Integration Process with a receive step, and a send step. In de send step I am asking for a transport acknowledgement.
When I test the interface and I look in the SXMB_MONI in PI, I see the acknowledgement given back to the IP, but in the SAP backend system I don't receive anything in the abap proxy which had send the original message. In de SXMB_MONI from SAP I see a "?" Still awaiting acknowledgement.
Can anyone help me with this scenario? I really need an acknowledgement from the file adapter in the calling abap proxy.
Regards, Jeroen

You need to crate a REceiver Agreement for this sender...
The Integration Server sends an acknowledgment message back to the sender (CENTRAL_BACK). It uses the name of the sender system for logical and technical backward routing.
If the sender is addressed using an ABAP proxy, you must define a corresponding receiver agreement for this sender.
http://help.sap.com/saphelp_nw04/helpdata/en/29/345d3b7c32a527e10000000a114084/content.htm
-SM

Process a PDF File to an ABAP Proxy

Hello,
Does anyone know how to process a pdf file straight to an abap proxy.
With just a flat sender file adapter without conversion to a xsd:Base64Binary field straight to a Abap-proxy.
Error message :
SAP:Code area="ABAP">PARSE_APPLICATION_DATA</SAP:Code>
<SAP:P1>Request Message</SAP:P1>
<SAP:P2>CX_ST_MATCH_ELEMENT</SAP:P2>
<SAP:P3>/1SAI/TXS00000000000000000543</SAP:P3>
<SAP:P4>XML Bytepos.: 0 XML Path: Error Text: Element 'mt_pdf' expected</SAP:P4>
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error during XML => ABAP conversion (Request Message; error ID: CX_ST_MATCH_ELEMENT; (/1SAI/TXS00000000000000000543 XML Bytepos.: 0 XML Path: Error Text: Element 'mt_pdf' expected)) Element 'mt_pdf' expected</SAP:Stack>
I HAVE READ ALL the possibilities with java coding in the module tab etc. etc.
JUST is there "simple' way to solve this.
regards meinhart

Hi Meinhart,
I think you need to go with Conversion agent here.
Ref: http://www.saptechnical .com/Tutorials/XI/PDF/Index.htm
This would help you....
Thanks,

XML File Sender to ABAP Proxy

Hi Experts,
                I have a scenario like File to ABAP Proxy. Input file is huge like 60 MB and it's a XML file. Currently, it's consuming large resources in both XI & R/3 system.
                 I would like to use the option of Recordsets per message using the File Content Conversion. As the Input file being the XML, how the parameters under the File Content Conversion can be handled? Can you please throw some input on this?
Thanks,
Kumar.

Hi Kumar,
     I guess u cannot use File Content Conversion for an input file which is in XML format. But if ur concern is to handle the large file then, u can go thru the following link which talks abt handling large files...
<a href="/people/alessandro.guarneri/blog/2007/02/21/sap-xi-acting-as-a-huge-file-mover:///people/alessandro.guarneri/blog/2007/02/21/sap-xi-acting-as-a-huge-file-mover
Regards,
Akshay

FTP to ABAP Proxy Scenario - getting error CO_TXT_CHANNEL_PASSWORD_ERROR

We have transported PI and EP data from development server to respective production, every thing is running fine except the abap proxy scenarios i.e. PI reads file from ftp location and calls the abap proxy but we are getting following errors:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>

<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="OUTBINDING">CO_TXT_CHANNEL_PASSWORD_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Unable to read user password from communication channel of type Error when accessing the secure store (access ID = FD768D4A8772DB50E1000000AC10041E) Error while reading from the secure store: ERROR_UNKNOWN: Cannot find entry in secure store (SECSTORE,023)</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Any solution?
Please note that I have searched and applied solutions given on SDN forums but didn't get any success. So I am looking for new suggestions.
Regards,
Jawed Ali

Jawed ,
Please test the HTTP destination of your receiver comm channel.
Which is the RFC connection to your R3 system.
Transaction SM59 and check the logon parameter for the connection you are using.
Regards,

Mail Sender to Abap Proxy Receiver with Attachements

Hi All,
Scenario: I need to create a ticket in Solman from a mail. I intend to do the scenario as Mail sender to Abap Proxy receiver asynchronous.
I have configured my sender mail adapter and am able to get the mails in XI. The attachements also appear in Inbound payload as MailAttachement-1, MailAttachement-2 etc. I have checked use mail packege and keep attachements in sender adapter.
Transport Protocol: IMAP4
Message Protocol: XIPAYLOAD
Queries:
1. My Inbound Data Type is the mail Package -- ximail30_xsd. Here in sxmb_moni I can see the mail attributes like from, to and the mail body in content. But How can I read the attachements in my message mapping.
2. How can I pass these attachements to Abap Proxy ( I do not need to alter attachments only pass to proxy ). These attachements have to be attached to the Solman ticket in SOLMAN server.
Appreciate your kind response to my above queries.
Thanks.
Regards,
Siddhesh S.Tawate
PS: I have tried using PayloadSwapBean in adapter module but still the content at source remains same.

Hi,
Please find below the part of code that might help you. I have given code only responsible for attachements part of the ticket.
loop at lt_attach into l_attachment.
        count = count + 1.
        if count = 1.
          first_line = 1.
        endif.
        l_type = l_attachment->GET_CONTENT_TYPE( ).
        split l_type at '"' into l_type
                                 file_name
                                 l_name.
        l_name = file_name.
        split file_name at '.' into file_name
                                    file_type.
        l_xstring = l_attachment->GET_BINARY_DATA( ).
        strlen = xstrlen( l_xstring ).
        Compute int = ( strlen div 255 ).
        Compute rem = ( strlen mod 255 ).
        if rem <> 0.
          int = int + 1.
        endif.
        count1 = int.
        if count = 1.
          last_line = count1.
        else.
          if int = 1.
            first_line = last_line.
          else.
            last_line = first_line + count1.
          endif.
        endif.
        wa_APPX_HEADERS-APPXNO = count.
        wa_APPX_HEADERS-DESCR = l_name.
        wa_APPX_HEADERS-FILETYP = file_type.
        wa_APPX_HEADERS-FILENAM = l_name.
        wa_APPX_HEADERS-FILEFM_UL = 'BIN'.
        wa_APPX_HEADERS-FIRSTL = first_line.
        wa_APPX_HEADERS-LASTL = last_line.
        wa_APPX_HEADERS-FILELEN = strlen.
        wa_APPX_HEADERS-LAST_USR = sy-uname.
        GET TIME STAMP FIELD wa_appx_headers-TIMESTAMP.
        append wa_APPX_HEADERS to it_APPX_HEADERS.
        while count1 <> 0.
          count1 = count1 - 1.
          if count1 <> 0.
            wa_APPX_LINES_bin-LINE = l_xstring+0(255).
            shift l_xstring left by 255 places in BYTE MODE.
          ELSE.
            wa_APPX_LINES_bin-LINE = l_xstring.
          endif.
          append wa_APPX_LINES_bin to it_APPX_LINES_bin.
          clear: wa_APPX_LINES_bin, wa_APPX_LINES.
        endwhile.
        first_line = last_line + 1.
        clear: strlen, count1, file_name, file_type, l_type, int, rem, l_xstring, l_attachment.
      endloop.
CALL FUNCTION 'BAPI_NOTIFICATION_CREATE'
        EXPORTING
          NOTIF_EXT                = wa_NOTIF_EXT
        NOTIF_CRM                = wa_NOTIF_CRM
IBASE_DATA               =
     IMPORTING
       NUMBER                   = Refnum
       NUMB                     = Numb
       REFNUM                   = Ticket_No
       SYSID                    = SYSID
        TABLES
          NOTIF_PARTNERS           = it_NOTIF_PARTNERS
        NOTIF_NOTES              = it_NOTIF_N_EXT
          NOTIF_SAP_DATA           = it_NOTIF_SAP_DATA
        NOTIF_TEXT_HEADERS       = it_NOTIF_TEXT_HEADERS
        NOTIF_TEXT_LINES         = it_NOTIF_TEXT_LINES
        APPX_HEADERS             = it_APPX_HEADERS
        APPX_LINES               = it_APPX_LINES
        APPX_LINES_BIN           = it_APPX_LINES_BIN
         RETURN                   = RETURN
Please observe how first and last line of attachement is calculated. That is what created problem for me initially.
Hope this helps.
Regards,
Siddhesh S.Tawate

Dynamic file naming with File/FTP adapter

Hi all,
I have a requirement for writing files with names of the files based on a customer ID.... a dynamic name based on a value retrieved from the customer DB.
I have already tried using the dynamic file naming suggestion in the bpel dev guide, it does not work. I followed the instructions, the process fails to compile and throws "part" and "undefined variables" errors etc.
Has anyone succesfully used file/ftp adapter to write files with dynamic file names (using a varibale), not %SEQ% or %datetime% formats?
Thanks,
Hasan

You can create a header variable that will allow you to set the outbound file name inside the process. This variable is a message type. From the type chooser select:
Message Types
Partner Links
Outbound Partner Link
Outbound wsdl
Message Types
Imported WSDL
fileAdapterOutboundHeader.wsdl
OutboundHeader_msg
This variable will have a part filename.
Set this part to whatever you wish your file to be named.
Select the invoke to your outbound file/ftp partnerlink. Move to the adapters tab and select the header variable you created as the Input Header Variable.

Receive CSV attachment via Mail Adapter and process into ABAP proxy

Hi,
I have the following scenario:
1. Receive e-mail with CSV attachment
2. Process through Mail adapter (KeepAttachments = Yes in order to retain the CSV attachment)
3. Receive into ABAP proxy (with CSV attachment)
The next step is to read the attachment in the ABAP proxy and process the CSV attachment data into CRM.
The CSV attachment contains the data I wish to process - the body of the e-mail will not contain this information.
The problem I have is reading the attachment data in the proxy - not sure of the methods/class to call - anyone got any ideas ?
Another question is this the best way to do this and process the CSV attachment data ?
I know I could use the PayloadSwapBean to switch the payload to the attachment but then I am stumped with how the attachment is processed through PI 7.1 - how do you transform the CSV format payload into XML so PI will be able to process it through mapping.
Either option is viable - an answer to either question would be great.
1. How do you read the attachment data in an inbound ABAP proxy ?
2. How do you transform the CSV attachment data after the PayloadSwapBean from CSV to XML ?
Kind regards
Colin.

Hi Colin
As you are not interested in processing the body of email. Swap the payload to the attachment using the PayloadSwapBean
Change the content from CSV to XML using MessageTransformBean. Now pass this information to Proxy. You dont need to deal with attachments in proxy.
It is not possible to read attachment in server proxy because the class and interface you create will not have data type which can refer to an attachment processing interface in ABAP.
Thanks
Gaurav

ABAP Proxy generation terminated (WSDl choice element not supported)

Hello
Im trying to generate ABAP proxy from WSDL file (A valid XSD file has imported as External definitions in to XI Integration Repository and created Out bound Interface which gives WSDL file for Proxy generation in SPROXY).
Unfortunately one of the WSDL file element "<choice>" not supported by ABAP Proxy Generation. it gives the following error.
Proxy generation terminated: WSDL error (<choice> not supported)
Message no. SPRX038
Syntax of <choice> element code in WSDL file:
<xsd:choice minOccurs='1' maxOccurs='1'>
<xsd:element name='Employees' minOccurs='1' maxOccurs='1'>
</xsd:element>
</xsd:choice>
Can some one please help if already come across this kind of problem.
Please suggest me if there any alternate element for WSDL <choice>.
Regards
Rajesh

Hi Aamir
Thanks for your help...
I have gone through attached thread.
Does It means should i change <choice> element with any alternate element. If it is the case can u suggest me any alternate to <choice> element.
Can u pls tell what are all changes i need to do in WSDL file to support ABAP proxy generation.
Regards
Rajesh

ABAP Proxy Exception

Hello everybody i have this error in my sxmb_moni of xi for a abap proxy server receiver:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIProxy</SAP:Category>
<SAP:Code area="ABAP">DYNAMIC_CALL_FAILURE</SAP:Code>
<SAP:P1>UNCAUGHT_EXCEPTION</SAP:P1>
<SAP:P2>ZFUS_CL_MI_FMGOB_CAT_FONDOS_C1</SAP:P2>
<SAP:P3>EXECUTE_SYNCHRONOUS</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText>Unable to execute the dynamic application call (kernel error ID UNCAUGHT_EXCEPTION, class ZFUS_CL_MI_FMGOB_CAT_FONDOS_C1, method EXECUTE_SYNCHRONOUS)</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
any suggestions?
Regards,
Julio Cesar

Hi
Below is the full details of above links
For link 4196517?
Q) Hi All,
I have got a requirement to raise an exception from existing ABAP Proxy depending on condition. XI consultant created a fault messge type and attached to the inbound interface message type. I have regenerated the ABAP proxy but I cant find any thing in excpetion tab to raise exception.
Please let me know the solution for this.
Answers : 1) Go to Sproxy .
Select the message interface for which you generated the proxy.
Click on the Structure tab. Do you see any Exception Class generated for fault message ?
2) Just follow all the steps defined in the below Blog and you will find the solution.
/people/shabarish.vijayakumar/blog/2006/11/02/fault-message-types--a-demo-part-1
3) I can't find any exception class there in 'Structure' tab. what might be the problem.
4) In SProxy ..under the Message Interface you will see Fault Message Type.
Click on Fault Message Type and check if you can see the fault message type created by xi consultant.
Also ask your xi team to login to IR and re-activate the interface.
5) I can't find any fault message type under Fault Message Type. I will ask my XI consultant to reactivate the interface.
Is this the only problem for this or is htere any other reason for not finding this fault message type in SPROXY.
6) Ideally the fault message type should be visible unless he has defined Software Dependencies and using MT from some other SC.
Even if the fault message type is not visible everything could be all right.
Ask him to check if he selected the fault message type while activating the interface.
Do update us when you get a reply from ur xi team.
7) I have checked with XI admin, he said that he created fault message types in Development Xi but R/3 Development refers to Production XI system in exchange profiles. He asked me to change it to XI development in exhange profile settings. So I am searching info on how to set exchange profiles.
8) The following link will guide you ..
http://help.sap.com/saphelp_nw04s/helpdata/en/c9/7a1041ebf0f06fe10000000a1550b0/frameset.htm
I dont think we need to do any changes in Exchange Profile for proxy communication.
Changing the RFC Destinations (in your R/3 system)- LCRSAPRFC & SAPSLDAPI should solve your problem.
II) For Link :4147406?
Q) Hi All,
We have an ABAP Proxy implemented for posting goods movement and it is calling BAPI function module to post good movement. We have got a requirement that if BAPI returns any error, this error message send back to SAP XI.
data call proxy
Legacy -
> XI -
> SAP R/3(call bapi)
<----
error message
Please let me know how to send the message back to XI.
Answers: 1) Refer the following
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy - ABAP Proxy to File
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy - File to ABAP Proxy
2) you can utilize the fault messages for such an usage -
Ref:
Fault messages -
/people/shabarish.vijayakumar/blog/2006/11/02/fault-message-types--a-demo-part-1
Handling Web Service SOAP Fault Responses in SAP NetWeaver XI -
/people/jin.shin/blog/2007/05/21/handling-web-service-soap-fault-responses-in-sap-netweaver-xi
3) You have to do Fault message implementation in this case...
A no. of exception will be there.For any error proxy will catch the exception and will write it in the fault message...so....from r/3 response will go to Xi as Fault message response in case any error/exception occours......
have look here...
Fault message implementation.
/people/shabarish.vijayakumar/blog/2006/11/02/fault-message-types--a-demo-part-1
4) Please go through it is very useful.
/people/krishna.moorthyp/blog/2005/12/23/monitoring-for-processed-xml-messages-in-abap-proxy --Monitoring for Processed XML messages in ABAP Proxy
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy --ABAP Proxies in XI(Client Proxy)
/people/sap.user72/blog/2005/12/29/service-enable-your-sap-application-component --- Service Enable Your SAP Application Component
5) the file adapter can work only asynchronous, so you cant have a response. You should build two asynchronous messages. File -> proxy inbound and after the bapi call an outbound proxy is called which is sending a second messge to the file adapter.
6) you can define a synchronous scenario which will include request/response messages.
send the response back to XI.
the file adapter supports BE QoS.
http://help.sap.com/saphelp_nw04s/helpdata/en/0d/5ab43b274a960de10000000a114084/frameset.htm
7)I have an interface Z_stock_move(message interface(inbound)) and class z_STOCK_MOVE in that. I have clicked exception tab but not able to add exception there as its not enabled for change.
Please let me know how to add the exception to an existing abap proxy.so that i can raise an exception when bapi call to goods movenment returns errors.
Might be useful to U.

WSDL error during generation of ABAP proxy for web service

Hi friends,
I am getting error during the generation of ABAP proxy object for web service developed in .NET .
Error : Proxy generation terminated: WSDL error (<extension> not supported).
How to make this WSDL file compatible for ABAP proxy.
I have tried to edit WSDL file in XML Spy but did not get any option to replace/remove the tag <extention>.
If any one worked on this. Please help me its urgent.
Thanks and regards,
Shivanand.

HI ,
I am having the same issue!!!
Does ABAP Proxy Generation support <extension> ?
Is there a list available of what is supported and what not (please consider I do not have access to sap notes)?
Thanks

File/FTP to ABAP Proxy (file as attachment)

Similar Messages

Maybe you are looking for