File getting Delayed
Hi,
My scenario is that daily I am getting one file at a specified time but sometime that file gets delayed by 3 hour or 4 hours.
when I check log in moni I get following.
Where I can see that the message took time in DB_ENTRY_QUEUING.
<SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
<SAP:Timestamp type="end" host="cipip">20090830133000.143302</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="DBQUEUE">DB_ENTRY_QUEUING</SAP:Name>
<SAP:Timestamp type="begin" host="cipip">20090830133000.143309</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="DBQUEUE">DB_ENTRY_QUEUING</SAP:Name>
<SAP:Timestamp type="end" host="cipip">20090830221511.553973</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_XML_VALIDATION_RQ_INB</SAP:Name>
<SAP:Timestamp type="begin" host="cipip">20090830221511.557395</SAP:Timestamp>
Can somebody please suggest what this problem is as I am facing this problem only for this particular inteface.
Regards,
Nidhi
Hi Nidhi,
No you are looking at the Perfomance node of SOAP Header. There you will not find the Queue into which this interface message went.
Either check SAP:QIdInternal parameter in Runtime (in SOAP Header) or in SXMB_MONI scroll toward right and see the column Queue ID.
See whether all messages of this interface goes to the same queue, if yes then check sxmb_admin to see whether some queue configuration is made for this queue (which is resulting in the delay)
Regards
Suraj
Similar Messages
-
For whatever reason, I am frequently getting delays in seeing the characters after I type when using Firefox- ie- Firefox, G mail, etc- but not when using other apps like Skype. I have downloaded the latest add-ons and Flow Scroll w no improvement and moved the remote sensor closer to the keyboard and changed the batteries numerous times but because the issue is with only certain programs I wonder if it is Firefox that is having the problem? Thanks in advance for your help~ Jim
You can check for problems with the sessionstore.js and sessionstore.bak files in the Firefox profile folder that store session data.
Delete the sessionstore.js file and possible sessionstore-##.js files with a number and sessionstore.bak in the Firefox profile folder.
*Help > Troubleshooting Information > Profile Directory: Show Folder
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Multiple_profile_files_created
Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost and you will have to recreate them (make a note or bookmark them).
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
MBP late 2009 getting delays/timeouts while mount/dismount or plug/unplug
sigh
Running a MBP late 2009 with 3GHz, 8GB RAM and 500GB HDD (300GB free).
When I mount/dismount a drive it takes up to 1 min for the finder to respond again (getting the whirling ball).
When I plug/unplug headphones it takes up to 1 min for the finder to respond again
(getting the whirling ball).
Shutting down means it gets to to final screen and stays there for 2 min, then it powers down.
After any restart, it would mount/dismount plug/unplug fast (within 1 or 2 sec's). Then after a few min's, above behaviour starts.
So I do not get any crashes. I get delays where the finder is blocked for up to 1 min.
I updated to 10.6.4 some weeks ago and it started around that time.
What can I do?So I deleted cache files for various apps (incl. finder) and ran several tools (ie. mycleanmac) and still the same behaviour:
Whenever the finder has to update some settings, ie. disks, networks, screens, outputs... it hangs for a full minute and then goes on.
Any ideas?
Thank you in advance -
Hot backup getting delayed everyday
Hi All,
Everyday our hot backup job is getting delayed by a significant time. Before the tablespaces are placed into begin backup mode we spotted the alert log flooded with the below message ,
Mon May 21 00:23:46 2012
Incremental checkpoint up to RBA [0x396b.3365.0], current log tail at RBA [0x396
b.3386.0]
Mon May 21 00:54:03 2012
Incremental checkpoint up to RBA [0x396b.3b81.0], current log tail at RBA [0x396
b.3b98.0]
Mon May 21 01:24:21 2012
Incremental checkpoint up to RBA [0x396b.495a.0], current log tail at RBA [0x396
b.497a.0]
Mon May 21 01:54:47 2012
Incremental checkpoint up to RBA [0x396b.5109.0], current log tail at RBA [0x396
b.5137.0]
Mon May 21 02:25:13 2012
Incremental checkpoint up to RBA [0x396b.6771.0], current log tail at RBA [0x396
b.67b6.0]
Also after the tablespaces are placed into begin backup mode before the end backup occurs the altert log is also flooded with the below messages,
Incremental checkpoint up to RBA [0x396b.24107.0], current log tail at RBA [0x39
6b.24afe.0]
Mon May 21 05:58:39 2012
Incremental checkpoint up to RBA [0x396b.2569e.0], current log tail at RBA [0x39
6b.257f2.0]
Mon May 21 06:28:56 2012
Incremental checkpoint up to RBA [0x396b.2815a.0], current log tail at RBA [0x39
6b.28925.0]
Mon May 21 06:59:14 2012
Incremental checkpoint up to .
Then the tablespaces are placed into end backup mode resulting in significant delay.
Please help how we can reduce the backup time and also please throw some light on these checkpoint related messages.Hi Jonathon ,
Thanks for your valuable suggestion.
Here in our environment all the tablespaces go into hot backup mode at a time instead of one by one through a script.
Previously when the hot backup used to work fine the number of incremental checkpoints between begin backup and end backup were significantly less. It is also evident from the excerpt of the alert log file.
alter tablespace PROAIMIS01 begin backup
Completed: alter tablespace PROAIMIS01 begin backup
Mon Apr 19 01:02:47 2010
alter tablespace SYSTEM begin backup
Completed: alter tablespace SYSTEM begin backup
Mon Apr 19 01:02:47 2010
alter tablespace MAPDS01 begin backup
Completed: alter tablespace MAPDS01 begin backup
Mon Apr 19 01:02:47 2010
alter tablespace ADMN01 begin backup
Completed: alter tablespace ADMN01 begin backup
Mon Apr 19 01:02:47 2010
alter tablespace PACESIS01 begin backup
Completed: alter tablespace PACESIS01 begin backup
Mon Apr 19 01:02:47 2010
alter tablespace CTPDS01 begin backup
Completed: alter tablespace CTPDS01 begin backup
Mon Apr 19 01:07:47 2010
***Completed checkpoint up to RBA [0x1ced.2.10], SCN: 10912956469916***
***Mon Apr 19 01:14:13 2010***
***Incremental checkpoint up to RBA [0x1ced.fd.0], current log tail at RBA [0x1ced.***
***10a.0]***
***Mon Apr 19 01:44:32 2010***
***Incremental checkpoint up to RBA [0x1ced.73f.0], current log tail at RBA [0x1ced***
***.89e.0]***Mon Apr 19 01:51:58 2010*alter tablespace CTPIS01 end backup*Mon Apr 19 01:51:58 2010
Completed: alter tablespace CTPIS01 end backup
Mon Apr 19 01:51:58 2010
alter tablespace MAPDS01 end backup
Completed: alter tablespace MAPDS01 end backup
Mon Apr 19 01:51:58 2010
alter tablespace SYSAUX end backup
Completed: alter tablespace SYSAUX end backup
Mon Apr 19 01:51:58 2010
alter tablespace AUDT01 end backup
Completed: alter tablespace AUDT01 end backup
Mon Apr 19 01:51:59 2010
alter tablespace PROAIMIS01 end backup
Completed: alter tablespace PROAIMIS01 end backup
Mon Apr 19 01:51:59 2010
alter tablespace MAPIS01 end backup
Completed: alter tablespace MAPIS01 end backup
Mon Apr 19 01:51:59 2010
alter tablespace UNDO01 end backup
Completed: alter tablespace UNDO01 end backup
Mon Apr 19 01:51:59 2010
alter tablespace USER01 end backup
Completed: alter tablespace USER01 end backup
Mon Apr 19 01:51:59 2010
alter tablespace PROAIMDS01 end backup
Completed: alter tablespace PROAIMDS01 end backup
Mon Apr 19 01:51:59 2010
alter tablespace PACESIS01 end backup
Completed: alter tablespace PACESIS01 end backup
Mon Apr 19 01:52:00 2010
alter tablespace XDB01 end backup
Completed: alter tablespace XDB01 end backup
Mon Apr 19 01:52:00 2010
alter tablespace ADMN01 end backup
Completed: alter tablespace ADMN01 end backup
Mon Apr 19 01:52:00 2010
alter tablespace SYMANTEC_I3_ORCL end backup
Completed: alter tablespace SYMANTEC_I3_ORCL end backup
Mon Apr 19 01:52:00 2010
alter tablespace CTPDM01 end backup
Completed: alter tablespace CTPDM01 end backup
Mon Apr 19 01:52:00 2010
alter tablespace PACESDS01 end backup
Completed: alter tablespace PACESDS01 end backup
Mon Apr 19 01:52:00 2010
alter tablespace SYSTEM end backup
Completed: alter tablespace SYSTEM end backup
Mon Apr 19 01:52:01 2010
alter tablespace CTPDS01 end backup
Completed: alter tablespace CTPDS01 end backup
Mon Apr 19 01:52:01 2010
alter tablespace PERF01 end backup
Completed: alter tablespace PERF01 end backup
Mon Apr 19 01:52:01 2010
alter database backup controlfile to trace
Completed: alter database backup controlfile to trace
Mon Apr 19 01:52:01 2010
alter database backup controlfile to '$CTLBKPDIR/$ORACLE_SID-$dt-$tm.ctl'
Completed: alter database backup controlfile to '$CTLBKPDIR/$ORACLE_SID-$dt-$tm.
ctl'
Mon Apr 19 01:52:03 2010
Beginning log switch checkpoint up to RBA [0x1cee.2.10], SCN: 10912957698129
Thread 1 advanced to log sequence 7406
Completed: alter tablespace PACESDS01 end backup
Mon Apr 19 01:52:00 2010
alter tablespace SYSTEM end backup
Completed: alter tablespace SYSTEM end backup
Mon Apr 19 01:52:01 2010
alter tablespace CTPDS01 end backup
Completed: alter tablespace CTPDS01 end backup
Mon Apr 19 01:52:01 2010
alter tablespace PERF01 end backup
Completed: alter tablespace PERF01 end backup
Mon Apr 19 01:52:01 2010
alter database backup controlfile to trace
Completed: alter database backup controlfile to trace
alter tablespace ADMN01 end backup
Completed: alter tablespace ADMN01 end backup
Completed: alter tablespace CTPDS01 begin backup
Mon Apr 19 01:07:47 2010
Completed checkpoint up to RBA [0x1ced.2.10], SCN: 10912956469916
Mon Apr 19 01:14:13 2010
Incremental checkpoint up to RBA [0x1ced.fd.0], current log tail at RBA [0x1ced.
10a.0]
Mon Apr 19 01:44:32 2010
Incremental checkpoint up to RBA [0x1ced.73f.0], current log tail at RBA [0x1ced
.89e.0]
Mon Apr 19 01:51:58 2010
alter tablespace CTPIS01 end backup
Mon Apr 19 01:51:58 2010
Completed: alter tablespace CTPIS01 end backup
Mon Apr 19 01:51:58 2010
alter tablespace MAPDS01 end backup
Completed: alter tablespace MAPDS01 end backup
Mon Apr 19 01:51:58 2010
alter tablespace SYSAUX end backup
Completed: alter tablespace SYSAUX end backup
Mon Apr 19 01:51:58 2010
alter tablespace AUDT01 end backup
Completed: alter tablespace AUDT01 end backup
Mon Apr 19 01:51:59 2010
alter tablespace PROAIMIS01 end backup
Completed: alter tablespace PROAIMIS01 end backup
Mon Apr 19 01:51:59 2010
alter tablespace MAPIS01 end backup
Completed: alter tablespace MAPIS01 end backup
Mon Apr 19 01:51:59 2010
alter tablespace UNDO01 end backup
Completed: alter tablespace UNDO01 end backup
Mon Apr 19 01:51:59 2010
alter tablespace USER01 end backup
Completed: alter tablespace USER01 end backup
Mon Apr 19 01:51:59 2010
alter tablespace PROAIMDS01 end backup
Completed: alter tablespace PROAIMDS01 end backup
Mon Apr 19 01:51:59 2010
alter tablespace PACESIS01 end backup
Completed: alter tablespace PACESIS01 end backup
Mon Apr 19 01:52:00 2010
alter tablespace XDB01 end backup
Completed: alter tablespace XDB01 end backup
Mon Apr 19 01:52:00 2010
alter tablespace ADMN01 end backup
Completed: alter tablespace ADMN01 end backup
Mon Apr 19 01:52:00 2010
alter tablespace SYMANTEC_I3_ORCL end backup
Completed: alter tablespace SYMANTEC_I3_ORCL end backup
Mon Apr 19 01:52:00 2010
alter tablespace CTPDM01 end backup
Completed: alter tablespace CTPDM01 end backup
Mon Apr 19 01:52:00 2010
alter tablespace PACESDS01 end backup
Completed: alter tablespace PACESDS01 end backup
Mon Apr 19 01:52:00 2010
alter tablespace SYSTEM end backup
Completed: alter tablespace SYSTEM end backup
Mon Apr 19 01:52:01 2010
alter tablespace CTPDS01 end backup
Completed: alter tablespace CTPDS01 end backup
Mon Apr 19 01:52:01 2010
alter tablespace PERF01 end backup
Completed: alter tablespace PERF01 end backup
But for the last couple of days the number of incremental checkpoints seem to be higher between begin backup and end backup like below,
Incremental checkpoint up to RBA [0x396d.3129.0], current log tail at RBA [0x396
d.366c.0]
Tue May 22 03:14:23 2012
Incremental checkpoint up to RBA [0x396d.147a8.0], current log tail at RBA [0x39
6d.15ac8.0]
Tue May 22 03:44:45 2012
Incremental checkpoint up to RBA [0x396d.1c679.0], current log tail at RBA [0x39
6d.1d177.0]
Tue May 22 04:15:08 2012
Incremental checkpoint up to RBA [0x396d.20387.0], current log tail at RBA [0x39
6d.205dd.0]
Tue May 22 04:45:30 2012
Incremental checkpoint up to RBA [0x396d.20dcf.0], current log tail at RBA [0x39
6d.2109e.0]
Tue May 22 05:15:48 2012
Incremental checkpoint up to RBA [0x396d.23af5.0], current log tail at RBA [0x39
6d.23d6a.0]
Tue May 22 05:46:05 2012
Incremental checkpoint up to RBA [0x396d.245e3.0], current log tail at RBA [0x39
6d.245ef.0]
Tue May 22 05:47:08 2012
Also the parameter log_checkpoint_interval is set to zero here.
log_checkpoint_interval integer 0
And the parameter fast_start_mttr_target is set to 300
fast_start_mttr_target integer 300
Please suggest .. -
FIX for USB issue where Files get corupted after I sucsessfully transfer to N
MP3 Player: Muvo N200 GB
Firmware: Creative MuVo Micro N200 Audible Firmware Upgrade .2.0
OS: Windows 2000 pro
Machine: Ibm Thinkpad
PROBLEM:
drag a folder of MP3's to the N200 in the Windows Explorer
2 wait for the zig zag line on the MP3 player to go straight.
3 Stop the Muvo mass stoarge device
4 Unplug the USB from the computer
5 Turn the Muvo N200 on
6 Folder has vanished
7 Plug Muvo back into computer
8 Folder is there, all files are missing
Also .. if I plug the Muvo in right after I coppied the files (after step 4) the files exist. I dragged them to the desktop, compared them to the originals with a binary compare and they are identical ... just to see if the files got corrupted.
It seems that when I turn the Muvo on, the files get deleted.
I then installed the N200 Media Explorer with drivers .. didn't help at all.
I tried this on a different machine, exact same files, and it works fine. Same OS, no Media Explorer.
Also, this is my second N200. Sent the other one back after talking with support. Got an error at the end of a format. When I tried to install the .2 firmware, I could no longer turn the player on (didn't try recover). I'm sure this N200 will do the same on my thinkpad. I installed the firmware on the other machine (fool me once ....)
EDIT: <FONT color=#cc9900>Further testing showed that this is a problem with my thinkpad. The N200 works fine as a thumb dri've on every other machine I tried. I tried using another thumb dri've on my Thinkpad and it failed in the same way. Also tried a Muvo NX .. just for kicks and it didn't work either.
<FONT color=#cc9900>FUnny thing is that I can copy a file to the N200, read it back right away .. compare them and they are identical. ONce I remove the dri've, and plug it back in, the file is corrupted.
Message Edited by chrisjc on <SPAN class=date_text>06-03-2005 <SPAN class=time_text>03:5 PM
Message Edited by chrisjc on <SPAN class=date_text>06-03-2005 <SPAN class=time_text>03:54 PM
Message Edited by chrisjc on 06-3-2005 0:26 PM:smileyvery-happy:My N200 now works on my thinkpad, and I just have to report on what I did to fix it .. just in case this helps anyone however indirectly.
In the device manager, I changed all Host controllers from
Intel 8280CA/CAM USB Uni'veral Host Controller
to
Strandard Uni'versal PCI to USB Host Controller
And now My USB not only works on my N200, it also fixed an issue with my USB scanner.
HOW TO DO THIS:
Right Click on the My Computer ICON
select MANAGE
select Device Manager in the left hand column
expand Uni'versal Serial Bus Controller in right hand column
Click on Intel 8280CA/CAM USB Uni'veral Host Controller and
Select Driver Tab and select Update Driver
Next ... select radio button that says Display a list of Known.....
then select Standard...
do this for all Host controllers.
Good luck ... I've been through everything if you want to send me a message. -
The following error comes up when I try to install the updated Firefox:
"The operation can’t be completed because some items had to be skipped. For each item, choose File > Get Info, make sure “Locked” is deselected, and then check the Sharing & Permissions section. When you are sure the items are unlocked and not designated as Read Only or No Access, try again."
When I follow the instructions in the error message, it shows that my user name has read and write access. There are a couple other items that are read only. I tried to change this to read and write, but the Sharing and Permissions options are greyed out and will not let me change them. What is the work around for this? I would really like to install the new firefox.
Thanks.Hello,
Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default('''This will NOT delete profile info such as bookmarks and history'''):
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!
Thank you. -
I have all my music cd's on a hard drive as wav files when I try to add them to I tunes the files get there but no album info I end up with a bunch of track 1's by unknown artists. Is there a way to transfer each album over so it shows up like a normal CD
Try posting in a more appropriate forum, as this has noting to do with itunes U - the place where University/college/museums post education material.
-
Music files getting renamed (why?), iTunes loses them
This has happened once every month or two since I started using iTunes on my laptop. I haven't been able to figure out what triggers it, but every now and then my music files get renamed. Not all of them, but, for example, this time every song on 24 albums out of about 100. It's always entire albums. When it has happened, I double-click on the song, I get the message saying the "original file could not be found", then I re-find it and it starts playing. When it starts playing, iTunes will usually rename it and/or move it to another folder. Sometimes the album ends up in the "unknown artists" folder, or in the "compilations" folder, but once I track it down (through iTunes "do you want to find it") it gets moved back where it belongs.
It was only this last time that I noticed that these lost files were not only getting moved, but they were getting renamed as well. When everything's working fine, my music has been moved and named like has been renamed by iTunes and looks like "C:\My Music\The Dresden Dolls\The Dresden Dolls\03 Missed Me.mp3". Some process in iTunes or in Windows is renaming only certain albums to look like "C:\My Music\Stephen Lynch\A Little Bit Special\10-Gerbil-Stephen Lynch-A Little Bit Special.mp3".
When the files get renamed like this, iTunes can't find them anymore until I go in and fix things, file by file. This takes forever. If not for the fact that I need to preserve my playlists and my play count numbers, I would just blast the whole library and reimport the folder, but I can't do that.
So, any one have any ideas why this happens, how to keep it from happening, and a way to fix things while preserving my metadata without having to double-click on a few hundred songs?
Windows XP ProActually, I found a good solution based on another question. If I re-import the folder, it finds all of those misnamed files and adds them to the library. Then I tell iTunes to keep my music folder organized, and it fixes all the file names and folders. Then after I make sure the original entries work again, I can sort the list by date added, and delete the new entries.
But I still have no idea why those albums are getting renamed. It's not just the most recent ones or the oldest ones, it's not ones that haven't been played, it's just random-seeming. -
File, get info, does not allow me to add grouping
This function used to work - File, get info. I could then change Artist, Album, Grouping, Genre, etc. Now for some reason, I can get the window to pop up, but everything is grayed out. I can see the info but cannot edit it. The only thing in black for editing is the start and stop time for the song. I don't want to edit this. I need to add a grouping title. This function used to work before the last program upgrades. Does anyone know why this might not be working? Is there a magic box somewhere that needs to be clicked on? Please help.
I had to go to were the songs were location on my hard drive and chance the security to allow full control then I could change it on iTunes
-
Cant do a file get from external server using file sender adapter with ftp
Hi all,
Up until now our company has only used the file sender adapter with ftp protocol to get a file from our XI server for processing and input the file into an integration process
I have a requirement to do an ftp file get from an external server
From our XI development server I can ftp directly to the external server and view the required directory using the command window via a DOS prompt (FTP open ...). So all firewall issues and communications are fine
Unfortunately I cannot currently pull files from the external server using the XI file adapter with ftp protocol from the XI development server AWB017
FTP Connection Parameters: External server name using port 21, Data Connection is Passive, No security, I supply a userid and password
Processing Parameters: Processing Mode is Archive (I tried test but this did not work either)
No messages appear in the RWB
Is there something else that I need to set up in order for the external ftp get to work via the XI file adapter?
Regards,
MikeThanks for your responses.
I have found the error messages in the File Adapter Monitor
Scenario 1
When I prefix the source directory with a forward slash, eg <b>/Folder/Subfolder</b> the error message is as follows
<b>EST: Error: Error connecting to ftp server 'ip address': FTPEx: /Folder/Subfolder: The system cannot find the path specified</b>
Scenario 2
When I DO NOT prefix the source directory with a forward slash, eg <b>Folder/Subfolder</b> a different error message is returned
<b>Error: Retrieving file 'FILENAME.XML' failed unexpectedly: FTPEx: Folder/Subfolder: The system cannot find the path specified</b>
At least in this scenario the adapter has been able to identify the file on the external FTP site but cannot retrieve it
Questions
I thought that the backslash prefix for the source directory was mandatory but I am receiving an error in each scenario
I receive the same error message whether the Processing Mode is 'Archive' or 'Test'
The logs on the external ftp server seem to indicate that I am simply connecting, sending username and password then quiting straight away. I am not issuing any commands that they can see
I thought that being a Sender adapter it would inherently execute a Pull or Get command
To recap, from our XI development server I can ftp directly to the external server and view the required directory using the command window via a DOS prompt (FTP open ...). So all firewall issues, communications, userid and password are fine
Has anyone experienced these issues?
Please advise on next course of action?
Regards,
Mike -
How did my stored files get converted from 'open with Adobe READER' to 'open with Adobe ACROBAT'? How can I get them re-set to open with 'Adobe Reader'?
Please reply to my e-mail: [email protected]It sounds as if you downloaded Adobe Acrobat Pro. If you did, uninstall it. Then repair Adobe Reader.
The free Acrobat account has no connection to any of this. -
PDF file gets corrupted when generated from BSP
Hi,
I am generating a PDF file from a BSP page ( see the code below). The problem is that PDF file gets corrupted and I am unable to open it. I also tried to use other functions like GUI_Download and DOwnload as suggested by many and they also do not work either. Has any one generated a PDF from BSP and can some one help?
Data: GG type String.
event handler for data retrieval
data : event type ref to cl_htmlb_event.
class cl_htmlb_manager definition load.
class CL_HTTP_RESPONSE DEFINITION LOAD.
DATA : PARAMS TYPE PRI_PARAMS,
VALID TYPE C,
GV_SUCCESS_SPOOL_NO LIKE SY-SPONO.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING DESTINATION = 'LOCL'
COPIES = COUNT
LIST_NAME = 'TEST'
LIST_TEXT = 'Test NEW-PAGE PRINT ON'
IMMEDIATELY = ''
RELEASE = 'X'
NEW_LIST_ID = 'X'
EXPIRATION = DAYS
LINE_SIZE = 140
LINE_COUNT = 23
LAYOUT = 'X_PAPER'
SAP_COVER_PAGE = 'X'
RECEIVER = 'SAP*'
DEPARTMENT = 'System'
NO_DIALOG = 'X'
IMPORTING OUT_PARAMETERS = PARAMS
VALID = VALID.
IF VALID <> SPACE.
NEW-PAGE PRINT ON PARAMETERS PARAMS NO DIALOG.
write :/ 'Hello Message1'.
write :/ 'Hello Message2 '.
NEW-PAGE PRINT OFF .
ENDIF.
data : spool_no TYPE TSP01-RQIDENT .
spool_no = sy-spono.
DATA: itab TYPE TLINE,
witab TYPE TABLE OF TLINE,
output TYPE STRING,
outputx TYPE XSTRING.
data : l_pdf_len type i.
data: mi_bytecount type i.
DATA : APP_TYPE TYPE STRING VALUE 'APPLICATION/PDF' .
DATA: cached_response TYPE ref to if_HTTP_RESPONSE.
data : l_display_url type string .
data : guid type GUID_32 .
call function 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
SRC_SPOOLID = spool_no
NO_DIALOG = 'X'
IMPORTING
PDF_BYTECOUNT = mi_bytecount
TABLES
PDF = witab
EXCEPTIONS
ERR_NO_ABAP_SPOOLJOB = 1
ERR_NO_SPOOLJOB = 2
ERR_NO_PERMISSION = 3
ERR_CONV_NOT_POSSIBLE = 4
ERR_BAD_DESTDEVICE = 5
USER_CANCELLED = 6
ERR_SPOOLERROR = 7
ERR_TEMSEERROR = 8
ERR_BTCJOB_OPEN_FAILED = 8
ERR_BTCJOB_SUBMIT_FAILED = 9
ERR_BTCJOB_CLOSE_FAILED = 10
others = 11.
if sy-subrc EQ 0.
LOOP AT witab INTO itab.
CONCATENATE
output
itab-tdline
INTO output in character mode.
ENDLOOP.
endif.
CALL FUNCTION 'SCMS_STRING_TO_XSTRING'
EXPORTING
text = output
mimetype = 'APPLICATION/PDF'
IMPORTING
buffer = outputx.
concatenate cl_abap_char_utilities=>byte_order_mark_little
outputx
into outputx in byte mode.
response->set_header_field( name = 'content-type' value =
'APPLICATION/PDF; charset=utf-16le' ).
response->delete_header_field( name =
if_http_header_fields=>cache_control ).
response->delete_header_field( name = if_http_header_fields=>expires
response->delete_header_field( name = if_http_header_fields=>pragma )
response->set_header_field( name = 'content-disposition'
value = 'attachment; filename = TEST.PDF'
l_PDF_len = xstrlen( OUTPUTX ).
response->set_data( data = OUTPUTx
length = l_PDF_len ).
navigation->response_complete( ).
Regards
Amit AgrawalHI Craig Cmehil,
I have tried this code as well as given in the URL specified by you. But using this also browser shows the following content. It seems that PDF content is corrupted.
My Output as shown on Browser Starts below this line----
DF-1.3
%âãÏÓ
2 0 obj
/WinAnsiEncoding
endobj
3 0 obj
<<
/Type /Font
/Subtype /Type1
/BaseFont /Courier
/Name /F001
/Encodg 2 0 R
>>
endobj
4 0 obj
<<
/Length 5 0 R
>>
stream
/F001 7.30 Tf 0 0 0.753 rg BT 18.00 570.65 Td 0 Tw <33302E30362E3230302020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020>Tj ET 0 0 0.753 rg BT 2950 570.65 Td 0 Tw
<20204854545020436F6E74726F6C202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020>Tj ET 0 0 0.753 rg BT 572.40 570.65 Td 0 Tw <2020202020202020202020202031>Tj ET q 0 0 0 RG 0.55 w 18.00 562.90 m
634. 562.90 l S Q 0 0 0.753 rg BT 18.00 551.45 Td 0 Tw <48656C6C6F20416D6974>Tj ET 0 0 0.753 rg BT 18.00 541.85 Td 0 Tw <48656C6C6F204765726176>Tj ET
endstream
endobj
5 0 obj
624
endobj
6 0 obj
<<
/Type /Page
/MediaBox
/Parent 1 0 R
/Resource
<<
/ProcSet
/PDF /Text
/Font
<<
/F001 3 0 R
>>
/XObject
<<
>>
>>
/Contents 4 0 R
>>
endobj
7 0 obj
<<
/Author (AMG )
/CreationDate (20050630 181301)
/Creator (Form X_58_170 EN)
/Producer (SAP R/3 Release 620 )
%SAPinfoStart TOA_DARA
%FUNCTI=( )
%MANDANT=( )
%DEL_DATE=(00000000)
%SAP_OBJECT=( )
%AR_OBJECT=( )
%OBJECT_ID=( )
%FORM_ID=( )
%FORMARCHIV=( )
%RESERVE=( )
%NOTIZ=( )
%SAPinfoEnd TOA_DARA
>>
endobj
1 0 obj
<<
/Type /Pages
/Kids
[ 6 0 R
/Count 1
>>
endobj
8 0 obj<<
/Type /Catalog
/Pages 1 0 R
/PageMode /UseNone
>>
endobj
xref
0 9
0000000000 65535 f
0000001801 00000 n
0000000017 0000n
0000000052 00000 n
0000000157 00000 n
0000000840 00000 n
0000000862 00000 n
0000001048 00000 n
0000001869 00000 n
trailer
/Size 9
/Root 8 0 R
/Info 7 0 R
>>
startxref
1944
%%EOF
Browser Displey Content Ends----
My Coding Starts----
Data: GG type String.
event handler for data retrieval
data : event type ref to cl_htmlb_event.
class cl_htmlb_manager definition load.
class CL_HTTP_RESPONSE DEFINITION LOAD.
DATA : PARAMS TYPE PRI_PARAMS,
VALID TYPE C,
GV_SUCCESS_SPOOL_NO LIKE SY-SPONO.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING DESTINATION = 'LOCL'
COPIES = COUNT
LIST_NAME = 'TEST'
LIST_TEXT = 'Test NEW-PAGE PRINT ON'
IMMEDIATELY = ''
RELEASE = 'X'
NEW_LIST_ID = 'X'
EXPIRATION = DAYS
LINE_SIZE = 140
LINE_COUNT = 23
LAYOUT = 'X_PAPER'
SAP_COVER_PAGE = 'X'
RECEIVER = 'SAP*'
DEPARTMENT = 'System'
NO_DIALOG = 'X'
IMPORTING OUT_PARAMETERS = PARAMS
VALID = VALID.
IF VALID <> SPACE.
NEW-PAGE PRINT ON PARAMETERS PARAMS NO DIALOG.
write :/ 'Hello Amit'.
write :/ 'Hello Gaurav '.
NEW-PAGE PRINT OFF .
ENDIF.
GV_SUCCESS_SPOOL_NO = sy-spono.
data : spool_no TYPE TSP01-RQIDENT .
spool_no = sy-spono.
write: GV_SUCCESS_SPOOL_NO.
*write: spool_no.
IF display_type = 'convertspool'.
DATA: itab TYPE TLINE,
witab TYPE TABLE OF TLINE,
output TYPE STRING,
outputx TYPE XSTRING.
data : l_pdf_len type i.
data: mi_bytecount type i.
DATA : APP_TYPE TYPE STRING VALUE 'APPLICATION/PDF' .
DATA: cached_response TYPE ref to if_HTTP_RESPONSE.
data : l_display_url type string .
data : guid type GUID_32 .
spool_no like TSP01-RQIDENT .
*spool_no = GV_SUCCESS_SPOOL_NO .
call function 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
SRC_SPOOLID = spool_no
NO_DIALOG = 'X'
IMPORTING
PDF_BYTECOUNT = mi_bytecount
TABLES
PDF = witab
EXCEPTIONS
ERR_NO_ABAP_SPOOLJOB = 1
ERR_NO_SPOOLJOB = 2
ERR_NO_PERMISSION = 3
ERR_CONV_NOT_POSSIBLE = 4
ERR_BAD_DESTDEVICE = 5
USER_CANCELLED = 6
ERR_SPOOLERROR = 7
ERR_TEMSEERROR = 8
ERR_BTCJOB_OPEN_FAILED = 8
ERR_BTCJOB_SUBMIT_FAILED = 9
ERR_BTCJOB_CLOSE_FAILED = 10
others = 11.
if sy-subrc EQ 0.
LOOP AT witab INTO itab.
CONCATENATE
output
itab-tdline
INTO output in character mode.
ENDLOOP.
endif.
*write : output.
CALL FUNCTION 'SCMS_STRING_TO_XSTRING'
EXPORTING
text = output
mimetype = 'APPLICATION/PDF'
IMPORTING
buffer = outputx.
*concatenate cl_abap_char_utilities=>byte_order_mark_little
*outputx
*into outputx in byte mode.
CREATE OBJECT cached_response TYPE CL_HTTP_RESPONSE EXPORTING add_c_msg = 1.
some Browsers have caching problems when loading Excel Format
response->set_header_field( name = 'content-type' value =
'APPLICATION/PDF' ).
response->delete_header_field( name =
if_http_header_fields=>cache_control ).
response->delete_header_field( name = if_http_header_fields=>expires
response->delete_header_field( name = if_http_header_fields=>pragma )
l_pdf_len = xstrlen( outputx ).
cached_response->set_data( data = outputx
length = l_pdf_len ).
cached_response->set_header_field( name = if_http_header_fields=>content_type
value = 'application/pdf' ).
cached_response->set_status( code = 200 reason = 'OK' ).
cached_response->server_cache_expire_rel( expires_rel = 180 ).
CALL FUNCTION 'GUID_CREATE'
IMPORTING
ev_guid_32 = guid.
CONCATENATE runtime->application_url '/' guid '.pdf' INTO l_display_url.
cl_http_server=>server_cache_upload( url = l_display_url
response = cached_response ).
RETURN.
My Coding Ends----
Any Further help on this.
Regards
Amit Agrawal -
I'm trying to setup a printer go wireless through my airport extreme, but every time I try to print the printing file gets paused. I'm in loop. PLEASE HELP! (The printer is a Brother 7020 monochrome)
I had the exact same problem
It turns out I was using a 20 foot USB cable between the printer and the Airport Extreme and the signal had become to weak to work. Try using nothing more than a 6 foot cable or try a new cable -
I have a shared file on my windows server that capture the responses from network. But unfortunately that file is getting refreshed after some interval. Sometime it shows 44 Kb size later become 4 and the previous data is totally erased.
Please help me with this. I have to keep that file getting appended !!
Thanks in advanceHi,
Does anyone modify the network file to erase previous data? Please check if there is any application affactting the network file. If you configure shadow copies on a shared file, you can recover a previous version of the file.
Shadow Copies of Shared Folders
http://technet.microsoft.com/en-us/library/cc771305.aspx
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Hi,
We have PI 7.1 installed in landscape. Some trace files getting generated at
server\sapmnt\SID\DVEBMGS01\j2ee\cluster\server0\jrfc07500_06148.trc and utilizing more disk space aroung 1 GB.
Could you please let me know from where trace can be disabled
thanksHi Yash,
Please find the details on this link:
http://help.sap.com/saphelp_nw04/Helpdata/EN/f6/daea401675752ae10000000a155106/content.htm
name
jrfc*.trc
location
directory j2ee/cluster/server* or defined path
how to switch on and off set JVM options for the server via the Config Tool and restart server: -Djrfc.trace=0/1, -Djco.trace_path=[defined_path]
Kindly let us know if this resolves the problem.
Thanks.
Regards,
Shweta
Maybe you are looking for
-
This is EXACTLY what happened to me! About two months ago, I received a text from Verizon stating, "Verizon appreciates your loyalty. You are currently on the $50/2GB plan. You can now get an extra 2GB of data per month for the same price you pay now
-
How do I install my plug-ins for Photoshop CC
I just installed Photoshop CC. I have been using CS6 with some plug in from topaz and others. How do I get the plug ins into PS CC? Thanks John
-
Wifi is connected but internet has stopped working
I have had my new ipod touch for a week and its been working fine. i had it connected to my wifi network at home with no problems until this morning when it stopped working. the wifi connectivity is fine and works with everything else, and the ipod r
-
After clicking 'sync wifi', my device disappears after disconnecting
instructions say to turn on syncing wifi then you can disconnect device and device is supposed to stay listed my device disappears from Device listing
-
Can not see ext HD on airport utility screen
Anyone know what might be wrong. Also I can not use my external HD to wirelessly backup via Time machine. Thanks