File Handling (Check for existing file)

now my problems is that i need to have a code that upon a request checks for a file (in the home dir) and if the file exists reads the information and ouputs it. here is an example:
check if file TEST.DATA exists?
check approved TEST.DATA exists
information outputed...
if the file is missing i need to have an error message...
PS. sorry if the question falls under "lame" but i am fairly new to java and i dont know the commands that well... thank you in advance!

File.exists()
Reading Text from a File
Useful places to seek for information:
- Java API documentation
- The Java Tutorial
- Code examples from Java developpers Almanac
- Google
- ...

Similar Messages

Why does multiple handles created for the file File (RW-) C:\Windows\winsxs\x86_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.4940_none_d08cc06a442b34fc

I am analysing the file handles created by my desktop application and when i generate a report using handle.exe, in report i could see multiple file handles created for
1) File (RW-) C:\Windows\winsxs\x86_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.4940_none_d08cc06a442b34fc
2) File (RW-) C:\Windows\winsxs\x86_microsoft.windows.common-controls_6595b64144ccf1df_6.0.7601.17514_none_41e6975e2bd6f2b2
I could see around 80 entries of file1 and around 5-10
file 2 .
What my understanding about the WinSxS, should load the dll only once and should keep referencing the same dll. But what my results out from handle.exe contains multiple file handles created. Is there a glitch in system or is it expected behavior? If there
is a problem how to fix it?
My system configuration is as follows
OS windows7 enterprise edition , service pack1..
64 bit os, intel core i7 processor
.net framework 4.5
Thanks
Srikanth

As this thread has been quiet for a while, we assume that the issue has been resolved. At this time, we will mark it as ‘Answered’ as the previous
steps should be helpful for many similar scenarios.  <o:p></o:p>
If the issue still persists and you want to return to this question, please reply this post directly so we will be notified to follow it up. You
can also choose to unmark the answer as you wish.  <o:p></o:p>
In addition, we’d love to hear your feedback about the solution. By sharing your experience you can help other community members facing similar
problems.  <o:p></o:p>
Thanks!<o:p></o:p>
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Can't get Firefox to load at all after trying fixes from support web site. Have checked for lock file, processes running, reboot, reinstall. NO JOY.

I'm running Vista for operating system on an HP laptop that's about 2 years old. I've installed all current updates.
I've always used Firefox. It started crashing and creating processes but not launching. Went to support and scoped it out -- there was a lock file my profile directory. I deleted it, and Firefox started loading.
Used it a few times -- closed the app each time on exist as per suggestions on support site info. One time -- back to square one, wouldn't load, just created a process. Reboot, ending process, checking for lock file, reinstalling -- all unsucessful.

Brian
Below is from using a SIP build. It does offer G722, but it's way down on the list so it's never used...
m=audio 32678 RTP/AVP 0 8 18 102 9 116 101
a=rtpmap:0 PCMU/8000
a=rtpmap:8 PCMA/8000
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=no
a=rtpmap:102 L16/16000
a=rtpmap:9 G722/8000
a=rtpmap:116 iLBC/8000
a=fmtp:116 mode=20
a=rtpmap:101 telephone-event/8000
Taking Sreekanth's suggestion to try a Skinny build, I get the following when I make a call. It offers codecs in the order I SET THEM AND ONLY THE CODECS I SET! YAY!
m=audio 19374 RTP/AVP 9 0 101
a=rtpmap:9 G722/8000
a=fmtp:9 bitrate=64
a=rtpmap:0 PCMU/8000
a=rtpmap:101 telephone-event/8000
Using a Skinny build on the phones also solved other issues. The phones use G711 when the whole path supports G711 and G722 when the whole path supports G722. It doesn't always use G722 and rely on transcoding for the call paths that can't use it. It's fantastic.. The phones also receive the QoS tagging that I set and that seems to result in better audio quality than on the SIP builds, which never did get those settings. Finally, it even solved a slow Exchange 2013 answer issue I have been experiencing for quite some time. I practically fell out of my chair when I saw everything that was fixed just by switching...
Cisco, PLEASE FIX YOUR SIP BUILDS! It's insane how the SCCP builds work perfectly and the SIP builds don't, especially with how much these phones cost.. I was thinking of possibly acquiring some 9951s, which are SIP only. I'm a little leery about that at this point. If they have the same kinds of issues as the SIP builds for the 7975g, there's no SCCP alternative to use..
Sreekanth
Thank you for suggesting a Skinny build.. That was about the only thing I didn't try. I am happy beyond belief that this is working so well now, even though the SIP builds should be just as well developed as the SCCP ones.

XI30 File Adapter - check for (NOT) incoming file

Hi!
We use XI30 SPS15 and have the following challenge: We expect every
week on a certain day a file coming from a customer. So far so good.
But now we want to check whether such a file has really come within a
given period of time and if not, we want to take some action (e.g.
trigger Alert or s.th. like that).
Business Background is: If the customer does not send the file or he
sends it too late, we cannot bill him in time, thus increasing our DSO.
Is there any mechanism within the XI to check things like these and to
trigger an alert? I've read the File Adapter Documentation as well as
the BPM documentation but I could not find any hint.
Any help would be great. Thanx!
Regards,
Volker kolberg

hi volker,
this is not supported in standard but...
you can do it very easily with standard ABAP job scheduling
- you schedule a job (every week, day etc.)
which starts a raport that send a RFC (or abap proxy call to the XI)
- then the RFC starts a BPM and inside it triggers a
java proxy that checks for a file
- if the proxy finds the file then if copies it to some other folder (which is monitored by another flow)
- if it doesn't find the file it triggers an error - sends mail or anything
the only thing you need to code is a few lines in java
to check the existance of a file + copying nothing else:)
this is the easiest way I believe till now <= Sp15
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI FAQ - Frequently Asked Questions</a>

HT1725 The files seems to be corrupted. To redownload the file, choose "Check for Available Downloads" from the Store menu.

While downloading apps from iTunes Store following error is repeatedly coming "The files seems to be corrupted. To redownload the file, choose "Check for Available Downloads" from the Store menu."? Please suggest any solution.

Contact itunes support.

Error: License File Exception (check the log file for details): ENT_PE_NODE not found in datastore

Hi;
i have install 2 MCS 7816 (publisher and suscriber) with call manager version 6.1, i have load the files licenses for the publisher and the phones, but when i load the file license for the suscriber in publisher server i had the error messeage :
Error : License File Exception (check the log file for details): ENT_PE_NODE not found in datastore
what s the solution.
Thanks for your help

Hello,
I seen this issue before, all you have to do is Contact Cisco Licensing team. In order to generate new licenses for your server.
Thanks,

Encode Video Files not working for avi files

Hi,
I've been trying to convert some .avi files to apple format using Lion's native 'Encode video files' function however keep getting a 'avconvert: source file not found for source file://fileparthhere avconvert: failed to create an export session. Check setup
I can't work out why as this has worked before in Lion and works fine for other video formats. The only thing I've done is remove Final Cut Express HD and can't add it again as I don't own it anymore
Suggestions? Is there a encoder to make this work or should it work anyway?
Thanks

If you click Yes the project file will be updated when you save it. That has nothing to do with the media.
Are the Lesson and Media folders still in the Book Files folder (or whatever it's called)?
Select one of the clips in the browser and use Edit>Item Properties. One of the first lines is Source. That gives you the file path for where your media is supposed to be located. What does it say? If nothing is there, use the File>Reconnect function and point the application to where the media is located.

64 bit Photoshop CS 5.1 Extended crashes every time I create a new file or open an existing file

I installed the 64 bit version of Photoshop CS 5.1 Extended successfully. It opens fully without issue. However, any time I create a new file or open an existing file, it crashes.
I figured this would have something to do with my graphics card, but it still does the same thing after updating the drivers & nVidia software. Seems like my whole trial will end up expiring before I ever even get to use it!! Please help!!
System details:
Windows 7 Home Premium, 64 bit
Service Pack 1
AMD Athlon II X2 215 Processor 2.7 GHz
4 GB RAM
nVidia GeForce 6150SE nForce 430
Thoughts?

I installed the 64 bit version of Photoshop CS 5.1 Extended successfully. It opens fully without issue. However, any time I create a new file or open an existing file, it crashes.
I figured this would have something to do with my graphics card, but it still does the same thing after updating the drivers & nVidia software. Seems like my whole trial will end up expiring before I ever even get to use it!! Please help!!
System details:
Windows 7 Home Premium, 64 bit
Service Pack 1
AMD Athlon II X2 215 Processor 2.7 GHz
4 GB RAM
nVidia GeForce 6150SE nForce 430
Thoughts?

Is xmp files only availble for RAW files?

When we develop a RAW image with Camera Raw, we always get an xmp file with all the settings,
But after I developed a JPG image, I saw the Camera Raw Settings icon appeared above the right upper corner of the image thumbnail in Bridge,
however, I couldn't find the xmp file.
Is xmp files only availble for RAW files? JPGs or TIFs don't have xmp files for their Camera Raw settings??

Read-only didn't work for me, on a single jpg file, although it did lead to some interesting behavior. Set the read-only attribute on a jpg file in Windows XP and then tried the following:
1. Opened in Bridge, then into ACR 5.4. Performed some edits, then tried "Done", received permissions error and would not save edits.
2. Did the same except now invoked "Open", went into CS4 with edits intact and allowed saving out as different file. However, the ACR edits were not saved within the jpg, as expected, nor was a xmp created.
3. Removed the read-only attribute, repeated (2). Even though did not save file in CS4 the "Open" action did embed the edits into the jpg.
So read-only doesn't really allow creation of a xmp file, other than perhaps temporarily for transfer to Photoshop. It does lead to somewhat inconsistent behavior, in that I would have expected the "Open" to fail also since it could not bury the edits in the jpg.
Richard Southworth

Ld: file was built for unsupported file format...for architecture armv7

hi:
I recently developed a project with custom ANE and I get this error msg when compile ipa since I upgraded the sdk from 3.5 to 3.8.
ANE compile CMD:
adt -package -storetype pkcs12 -keystore ane.p12 -storepass 1234 -target ane yund.ane extension.xml -swc yunding.swc -platform iPhone-ARM -platformoptions platform.xml IDS.framework library.swf libIslandIDSANE.a
platform.xml:
<platform xmlns="http://ns.adobe.com/air/extension/3.5">
     <sdkVersion>6.1</sdkVersion>
     <linkerOptions>
                    <option>-w</option>
        <option>-ios_version_min 4.2</option>
                    <option>-framework Foundation</option>
                    <option>-framework StoreKit</option>
                    <option>-framework AdSupport</option>
                    <option>-framework QuartzCore</option>
                    <option>-framework UIKit</option>
                    <option>-framework CoreGraphics</option>
                    <option>-framework SystemConfiguration</option>
                    <option>-framework Foundation</option>
                    <option>-lz</option>
     </linkerOptions>
             <packagedDependencies>
                    <packagedDependency>IDS.framework</packagedDependency>
          </packagedDependencies>
</platform>
msg:
ld: file was built for unsupported file format ( 0x56 0x65 0x72 0x73 0x69 0x6f 0x6e 0x73 0x2f 0x43 0x75 0x72 0x72 0x65 0x6e 0x74 ) which is not the architecture being linked (armv7): C:\Users\timoo\AppData\Local\Temp\139d9782-79fd-422a-8c15-da1da2da8c53/IDS.framework/IDS for architecture armv7
Compilation failed while executing : ld64
help me
thx

Have you Found the way to solve this problem yet?
I have got the same problem. Here is the error log when building the IPA:
ld: warning: ignoring file /var/folders/c0/m8m1_z5915qblkj9d_7jhmcw0000gn/T/3cb383e9-0092-4b1c-909f-5c219b2fbcd4/Par tytrack.framework/Partytrack, file was built for unsupported file format ( 0x56 0x65 0x72 0x73 0x69 0x6f 0x6e 0x73 0x2f 0x43 0x75 0x72 0x72 0x65 0x6e 0x74 ) which is not the architecture being linked (armv7): /var/folders/c0/m8m1_z5915qblkj9d_7jhmcw0000gn/T/3cb383e9-0092-4b1c-909f-5c219b2fbcd4/Par tytrack.framework/Partytrack
ld: warning: CPU_SUBTYPE_ARM_ALL subtype is deprecated: /Users/apple/Documents/flexsdk/flex3.9/lib/aot/lib/libDebugger1.arm-air.a(avmplusDebugger .cpp.o)
Undefined symbols for architecture armv7:
"_OBJC_CLASS_$_Partytrack", referenced from:
      objc-class-ref in libcom.haibin.extension.PromotionAPI.a(partyTrackAPI.o)
ld: symbol(s) not found for architecture armv7
Compilation failed while executing : ld64
My platformoption.xml content is：
<platform xmlns="http://ns.adobe.com/air/extension/3.8">
    <sdkVersion>7.0</sdkVersion>
    <linkerOptions>
        <option>-ios_version_min 4.3</option>
        <option>-framework CoreData</option>
        <option>-framework UIKit</option>
        <option>-framework Foundation</option>
        <option>-framework Security</option>
        <option>-weak_framework AdSupport</option>
    </linkerOptions>
    <packagedDependencies>
        <packagedDependency>Partytrack.framework</packagedDependency>
    </packagedDependencies>
</platform>
And my build command are:
<target name="package" description="Create the extension package">
<exec executable="${FLEX_HOME}/bin/adt" failonerror="true" dir="${basedir}">
<env key="AIR_SDK_HOME" value="${FLEX_HOME}"/>
<arg value="-package"/>
<arg line="-storetype pkcs12"/>
<arg line="-keystore testkey.p12"/>
<arg line="-storepass 123456"/>
<arg line="-target ane"/>
<arg value="../${ANE_NAME}.ane"/>
<arg value="extension.xml"/>
<arg line="-swc ../swc/${ANE_NAME}.swc"/>
<arg line="-platform iPhone-ARM -platformoptions platform.xml -C ../iPhone-ARM/ . "/>
<arg line="-platform Android-ARM -C ../Android-ARM/ ."/>
<arg line="-platform default -C ../default/ ."/>
</exec>
</target>
File "Partytrack.framework " is in the directory "iPhone-ARM"

Trying to copy a 10gb file to a memory stick but theres an error msg file to large for the file format of the stick. is there a way around this

trying to copy a 10gb file to a memory stick but there's an error msg, file to large for the file format of the stick. is there a way around this

If you use 'Disc Utility' you can format the stick (this will erase its contents) to be exFat which will still work with Mac and Windows but allow a larger file sizes to be placed onto the stick.
Disc Utility > Click the drive on the left > Erase (tab) > Change format to ExFat > Erase > Try putting the file on to the stick again.

I can not delete files to clean up existing files. I can from my phone but not my PC

i can not delete files to clean up existing files. I can from my phone but not my PC

Hi chrisb64054279,
Are you referring to files stored in your Acrobat.com online account at https://cloud.acrobat.com/files? If so, what happens when you try to delete the files? Are you receiving an error message?
Please provide a few more details about the issue that you're encountering, including what operating system you're on, and what browser you're using (if any). We'll get this sorted out.
Best,
Sara

Checking for existing Rollback Segments

Hello you all,
Is there a possibility to check for existing rollback segments within procedures?
Thanks
Hans

Hello
If you just want to be able to find out what rollback segments there are, you can query dba_rollback_segs, which will give you all sorts of info about rollback segments.
Is that what you need or is it more involved?
David

Hello, I have already bought FIFA 14 unlock pack.But now I've installed on my iPod and make check for existing purshase and it happen ''The Apple ID you entered couldn't be found or your password was incorrect.'' What that means?

Please help me

What do you mean by ""make check for existing purchase and it happens (error message)."
Just what are yo doing when yo get that error message?

Check for a file to exist

Hi all, I have a script which returns the path for a file in this way:
set outfile to (choose file name with prompt "Choose output file." default name "out.iso")'s POSIX path
the path is then passed to the shell. Now, I want the script to check whether that file exists and if it does, the script needs to be stopped.
I tried some ways I found on the web but none seems to work.
Any help would be appreciated.
Thank you!
Lorenzo

Try using:
set outfile to (choose file name with prompt "Choose output file." default name "out.iso")'s POSIX path
set thefile to POSIX file outfile
tell application "Finder"
if exists thefile then
return --or other commands to stop script
end if
end tell
(57077)

File Handling (Check for existing file)

Similar Messages

Maybe you are looking for