File Level transport in sap xi

Hi XI Experts,
             I am involved in a file level transport for xi 3.0, can some one send me the steps on how it is done?
I am not using CMS and i have seen the generic weblogs on the overview of transports like "Overview of Transition from Dev to QA in XI" and "XI Software Logistics 1: SLD Preparation".
Any other documents other than these two will be greatly appreciated.
Regards,
Anirban.

>>>you said about copying SLD, Any other suggestions?
this is only the case if you have many SLDs
as SAP suggests it's better to have only one, central SLD
...if you do then there's not much you have to do
just the configuration for the directory as I mentioned
file transports are numbered so you know which one was exported first, second (from the same scenario for example)
>>>>when we import idocs or rfc in xi do they automatically reflect in target after transport or we need to reimport them again
are you talking about the metadata or IR?
if metadata then I always do it in the PRD XI
I know that it should import itself with the first flow but still...
if you're talking about IR then no you cannot do
anything to your software component on the PRD XI
it's blocked for changes and it should stay like this...
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI FAQ - Frequently Asked Questions</a>

Similar Messages

  • SIK Transport files and None unicode SAP system

    Dear all,
    I have a question about SIK Transport files.
    As you know, when we install BOE SIK,we need transport some files into SAP system.
    There is  a TXT file for describing how to use SIK transport files in SAP system.
    I found that there is no detail about none unicode SAP system in this TXT file.
    All of them is about unicode.
    If your SAP system is running on a BASIS system earlier than 6.20, you must use the files listed below:
    (These files are ANSI.)
    Open SQL Connectivity transport (K900084.r22 and R900084.r22)
    Info Set Connectivity transport (K900085.r22 and R900085.r22)
    Row-level Security Definition transport (K900086.r22 and R900086.r22)
    Cluster Definition transport (K900093.r22 and R900093.r22)
    Authentication Helpers transport (K900088.r22 and R900088.r22)
    If your SAP system is running on a 6.20 BASIS system or later, you must use the files listed below:
    (These files are Unicode enabled.)
    Open SQL Connectivity transport (K900574.r21 and R900574.r21)
    Info Set Connectivity transport (K900575.r21 and R900575.r21)
    Row-level Security Definition transport (K900576.r21 and R900576.r21)
    Cluster Definition transport (K900585.r21 and R900585.r21)
    Authentication Helpers transport (K900578.r21 and R900578.r21)
    The following files must be used on an SAP BW system:
    (These files are Unicode enabled.)
    Content Administration transport (K900579.r21 and R900579.r21)
    Personalization transport (K900580.r21 and R900580.r21)
    MDX Query Connectivity transport (K900581.r21 and R900581.r21)
    ODS Connectivity transport (K900582.r21 and R900582.r21)
    If our SAP BASIS system  is beyond 6.20,but iit is not unicode system.
    Could we use these transport files to none unicode SAP system ?
    Thanks!
    Wayne

    Hi Wayne,
    the text and the installation guide is clearly advising based on the version of your underlying BASIS system and differentiates 620 or 640 and higher.
    so based on the fact that you system is a BI 7 system you are in the category of a 640 (or higher) basis system and therefore you have to use the Unicode ENABLED transports.
    ingo

  • Upload sap file to transport manger system

    Hi All
    I want to upload files from SAP to transport manger
    SAP gave me 4 files K903079.CE1,K903080.CE1,R903079.CE1 and R903080.CE1
    they said i need to use stms to upload those file to the system
    can some one give explaination how i need to do it ?
    Thanks in Advance

    hi
    copy the co-file (K.) under "\usr\sap\trans\cofiles" & data file (R.) under "\usr\sap\trans\data" @ OS level.
    then log to the server using SAP-GUI, execute t-code "stms", select the corresponding SID into which this files are to be imported. then in the menu select "extras" > "other request" >"add", then specify the request number as <sid>K9<nnnnn> and say "ok". automatically the request will added to the import queue.
    then select the request & click the "truck icon", it will automatically imported into ur system.
    hope this will help you.
    with regards,
    rajesh.

  • Error when adding EPA file to transport request via CTS

    I have a rather strange problem.  Sometimes when attempting to add an EPA file to a Transport Request via CTS I get the following error in my logs with a corresponding short dump.  This does not happen all the time.
    #000255D36E8F005B00015391000003DC00046C0470FF1359#1244666238275#com.sap.portal.pcdadmintools#sap.com/irj#com.sap.portal.pcdadmintools#MOROZOWSKIJO#24750##rp1.conair.com_RP1_2406850#MOROZOWSKIJO#28167c7055fe11dea0f1000255d36e8f#SAPEngine_Application_Thread[impl:3]_10##0#0#Error#1#/System/Server#Java### [com.sapportals.portal.pcd.admintools.export.ExportCTSHandling] Could not attach epa file to transport request
    [EXCEPTION]
    {0}#1#com.sap.tc.di.draft.ts.TsExecutionException: Error executing function (check stacktrace for details):CTS_FILE_APPEND_TO_REQUEST, (service=com.sap.tms)
         at java.lang.Throwable.<init>(Throwable.java:216)
         at java.lang.Exception.<init>(Exception.java:59)
         at com.sap.tc.di.draft.ts.TsException.<init>(TsException.java:19)
         at com.sap.tc.di.draft.ts.TsServiceException.<init>(TsServiceException.java:16)
         at com.sap.tc.di.draft.ts.TsExecutionException.<init>(TsExecutionException.java:16)
         at com.sap.tc.di.draft.cts.impl.adapters.jco.TmsJCoExceptions.throwTsServiceException(TmsJCoExceptions.java:74)
         at com.sap.tc.di.draft.cts.impl.adapters.jco.TmsJCoExceptions.throwTsException(TmsJCoExceptions.java:35)
         at com.sap.tc.di.draft.cts.impl.adapters.jco.TmsJCoAdapter.addFileToRequest(TmsJCoAdapter.java:536)
         at com.sap.tc.di.draft.cts.impl.adapters.jco.TmsTransportService.handOverAsStream(TmsTransportService.java:253)
         at com.sap.tc.di.draft.cts.impl.adapters.jco.TmsTransportService.requestUpdate(TmsTransportService.java:202)
         at com.sap.tc.di.draft.ts.impl.TransportRequestImpl.transmit(TransportRequestImpl.java:97)
         at com.sap.tc.di.draft.ts.impl.TransmissionPackageImpl.transmit(TransmissionPackageImpl.java:49)
         at com.sapportals.portal.pcd.admintools.export.ExportCTSHandling.attachFileToPackage(ExportCTSHandling.java:209)
         at com.sapportals.portal.pcd.admintools.export.pages.ExportStatusPage.prepareGenericPageSettings(ExportStatusPage.java:417)
         at com.sapportals.portal.pcd.admintools.export.pages.ExportStatusPage.dispatchPageRequest(ExportStatusPage.java:241)
         at com.sapportals.portal.pcd.admintools.export.ExportMain.doContent(ExportMain.java:89)
         at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:166)
         at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:111)
         at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:200)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:115)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:177)
         at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
         at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
         at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:200)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:115)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:177)
         at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
         at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
         at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:438)
         at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:404)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:848)
         at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:79)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:848)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:332)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:0)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:335)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:963)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:249)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:0)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:92)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:30)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:35)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:103)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
    Caused by: com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: The current application triggered a termination with a short dump.
         at java.lang.Throwable.<init>(Throwable.java:194)
         at java.lang.Exception.<init>(Exception.java:41)
         at java.lang.RuntimeException.<init>(RuntimeException.java:43)
         at com.sap.mw.jco.JCO$Exception.<init>(JCO.java:1117)
         at com.sap.mw.jco.MiddlewareJRfc.generateJCoException(MiddlewareJRfc.java:516)
         at com.sap.mw.jco.MiddlewareJRfc$Client.execute(MiddlewareJRfc.java:1224)
         at com.sap.mw.jco.JCO$Client.execute(JCO.java:3909)
         at com.sap.mw.jco.JCO$Client.execute(JCO.java:3417)
         at com.sap.tc.di.draft.cts.impl.adapters.jco.TmsJCoAdapter.executeFunction(TmsJCoAdapter.java:112)
         at com.sap.tc.di.draft.cts.impl.adapters.jco.TmsJCoAdapter.executeFunction(TmsJCoAdapter.java:133)
         at com.sap.tc.di.draft.cts.impl.adapters.jco.TmsJCoAdapter.addFileToRequest(TmsJCoAdapter.java:531)
         ... 38 more
    Edited by: Jon Morozowski on Jun 10, 2009 10:57 PM

    Here is the short dump in the ABAP system.
    Short text of error message:
    INTERNAL ERROR UPDATING REQUEST DESC OF RP1K900690
    Long text of error message:
    Technical information about the message:
    Message class....... "PU"
    Number.............. 601
    Variable 1.......... "INTERNAL ERROR UPDATING REQUEST DESC OF"
    Variable 2.......... "RP1K900690"
    Variable 3.......... " "
    Variable 4.......... " "
    I have checked the RFC destination in the J2EE Admin and that works OK.  This has me kind of stumped.

  • Advantages of CTS+ over File system transport

    Hello experts,
    I have searched a lot on SDN ,but couldn't find a document which exactly explains the advantages and disadvantages of CTS+ over File system Transport basically a table with points and the status of those points with CTS+ and File System Transport.
    Can you please help.
    Best Regards,
    Shweta

    The enhanced Change and Transport System (CTS+) enables you to transport Portal/Java objects and SAP-related non-ABAP applications in your system landscape, along with your ABAP objects. You can also administer non-ABAP systems in a CTS transport domain in SAP NetWeaver Application Server ABAP.
    http://help.sap.com/saphelp_nw70/helpdata/en/45/ec25370fdc3481e10000000a1553f6/content.htm
    You can integrate NWDI with CTS+ and have the transports moved through CTS+.
    Also, you utilize CTS+ for portal related transports as well.
    To start with, have a look at the following How to guides:
    http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b0ebf83b-6201-2b10-b58b-c14d3d3b6f61
    http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0249083-c0ab-2a10-78b8-b7a7854b1070
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/f0f75302-bf8b-2b10-d991-ee42c8de8eec
    Regards
    Pothana

  • Error when creating files for transport request SAPK-700BGINPLMWUI

    Hello experts,
    We're upgrading our 46c System to ERP 6.0 EHP4.
    In Phase  EHP_INCLUSION we get the following error Message: Disassembling package queue failed, rc = "2", reason = "Error when creating files for transport request SAPK-700BGINPLMWUI"
    We've already checked the SAINT version; Upgrade Fix, SAPCAR version. We've checked our TMS as well and everything seems  O.K.
    Any help would be really appreciated!!!
    Complete Error message:
    EhP component PLMWUI, 700                                                                               
    Looking for SAINT package for 'PLMWUI' ...                                                                               
    R3upReadNewPackages:                                                                               
    patchType='U', langVect='DEC'                                                                               
    RFC Login to: System="X05", Nr="00", GwHost="sxt ", GwService="sapgw00"                                                 
    RFC Login succeeded                                                                               
    Calling function module "spda_read_new_packages" by RFC                                                                     
      ismovesVersion='0'                                                                               
    R3upReadNewPackages: exit: rc=0                                                                               
    ... No matching package found.                                                                               
    R3upReadNewPackages:                                                                               
    patchType='I', langVect='DEC'                                                                               
    RFC Login to: System="X05", Nr="00", GwHost="sxt ", GwService="sapgw00"                                                 
    RFC Login succeeded                                                                               
    Calling function module "spda_read_new_packages" by RFC                                                                     
      ismovesVersion='0'                                                                               
    R3upReadNewPackages: exit: rc=0                                                                               
    Found: name = 'PLMWUI', release = '700', package = 'SAPK-700BGINPLMWUI', type = 'AOI'                                  
    ... Matching package found: 'PLMWUI','700','SAPK-700BGINPLMWUI'                                                             
    (trc) R3upPatchDisassembleQueue: 1 package queue entries                                                                    
    (trc) R3upPatchDisassembleQueue: force=YES                                                                               
    (trc) R3upPatchDisassembleQueue: 1 packages will be disassembled                                                            
    Starting disassembling package queue                                                                               
    Date & Time: 20100319133139                                                                               
    Starting RFC Login to: System = "X05", GwHost = "sxt ", GwService = "sapgw00"                                           
    RFC Login to: System="X05", Nr="00", GwHost="sxt ", GwService="sapgw00"                                                 
    RFC Login succeeded                                                                               
    Calling function module "SPDA_DISASSEMBLE_QUEUE" by RFC                                                                     
    Input table IT_PATQ:                                                                               
    "SAPK-700BGINPLMWUI","000","AOI","PLMWUI","700","SAP PLM Web UI","00"                                                       
    Call of function module "SPDA_DISASSEMBLE_QUEUE" by RFC succeeded                                                           
    Logging off from SAP system                                                                               
    Date & Time: 20100319133139                                                                               
    Disassembling package queue failed, rc = "2", reason = "Error when creating files for transport request SAPK-700BGINPLMWUI"

    Hello Anthes,
    Please Check the things in following sequence :
    1.Use latest SAPehpi, R3trans and tp versions.
    2. users/group authorization issue and/or ownersip limitations (set 777) .Reboot the server to make sure, that the authorisations are updated and there is no lock on a file in the EHPI dir.Repeat the phase.
    Folders where permissions should be 777 are Upgrade directory, Data Directory, Cofile directory and .../EPS/in.
    3. Source file corruption can be ruled out by execution
    R3trans -l /usr/sap/<SID>/..../abap/data/R-700BGINPLMWUI.SAP (The data file corresponding to the Package which is giving error). Check if this ends fine.
    Note 2050
    4. Confirm that your transport tool is 'healthy' by testing it in STMS. In SPAM in client 000 use the function Disassemble package and enter the package <Package name>.
    5. Try to update the kernel if it not helps.
    Best Regards
    Niraj

  • .doc File not opening in SAP

    Hi,
         I am a Network Engineer & i am a noob in SAP.
    One of our Customers is implementing SAP in their Enterprise & they are learning it.
    Today, there is an error came in the SAP.Some users are not able to open a .doc File from the SAP Window.SAP expert is saying that its a PC Error.We have re formatted the PC & re installed the Microsoft Office in it.Still, the error is coming in 3 PCs.
    Due to this, they (Users) are not able to download the reports.
      I am attaching a Screen Shot which will give you  the exact type of Error it is showing.Please help me step by step if you know the solution.
    Thanks in Advance!!
    Click on the Link for the Screen Shot:
    [SAP Error|http://i357.photobucket.com/albums/oo15/rajeevpayal/SAP_Error.jpg]
    <MOVED BY MODERATOR TO THE CORRECT FORUM>
    Edited by: Alvaro Tejada Galindo on Sep 28, 2011 3:42 PM

    Hi,
    EXECUTE I18N TRANSACTION CODE--> EXPAND I18N CUSTOMIZING > DOUBLE CLICK ON MS WORD EDITOR--> SELECT BOTH CHECK BOX FOR SCRIP AND SMARTFORMS AND CLICK ON ACTIVE...........
    NOW YOUR FILE CAN OPEN IN SAP...
    ABOVE MENTION STEPS ONLY WORK IN ECC VERSION...
    REGARDS,
    KRISHNA

  • Bex transport  in SAP BW 3.1

    Hello everybody,
    how do you organize Bex transport in SAP BW?
    In our installation, we find it necessary that some queries need to be designed in development system and tested before transport in production. We would like the person who's creating these queries to be able to create and release the transport for his query himself. With just one standard Bex transport this seems difficult to implement:  In our constellation, the standard Bex transport can not be transported to production system, because it may contain test queries, which are not wanted in productive system at all and collects changes of different projects and persons, so it may contain objects that are still in test status, while others need to be transported to production system. Collecting into different requests is only possible if the concerned objects belong to different packages?
    Collecting the needed objects in a transport request manually can't be done without releasing the Bex transport first because otherwise the objects are locked.
    How do you organize Bex transports in your system landscape?
    Thanks for any suggestions, Kathrin!

    Hi Kathrin,
    if you create a query in the development-system, the query will go to the Package $TMP, so no Transport is necessary. If you have a naming-convention, like <InfoProvder>_QU_nnnn or someting else for non-test Queries, it is easy to fetch them in the Transport Connection (Admin Workbench) and transport them in the production-system.
    Hope this helps,
    Regards
    Frank

  • How to check the current EHP stack level? in SAP

    Dear All,
    How to check the current EHP stack level? in SAP  . i have checked forum before i am posting but still comfused .
    same one said SAP_APPL , EA_Appl  and SAP _HR is 60n if n=1.2.3.4. if n =1 is enhanced package 1 similarly 2,3,4 .
    some one said SAP_BASIS 701,702,703,704 . according ehp1,2,3,4.
    Pls check the details and confirm either is ehp1 or ehp4 .
    Component version is simply shows SAP ECC 6.0 in system -> status.
    Software Component  - Release  - SP level
    SAP_ABA     701     0007
    SAP_BASIS     701     0007
    PI_BASIS     701     0007
    ST-PI     2008_1_700     0003
    SAP_BS_FND     701     0008
    SAP_BW     701     0007
    SAP_AP     700     0021
    WEBCUIF     700     0008
    SAP_APPL     604     0008
    SAP_HR     604     0029
    SAP_HRCAR     604     0029
    SAP_HRCAT     604     0029
    SAP_HRCAU     604     0029
    SAP_HRCBE     604     0029
    SAP_HRCBR     604     0029
    SAP_HRCCA     604     0029
    SAP_HRCCH     604     0029
    SAP_HRCCL     604     0029
    SAP_HRCCN     604     0029
    SAP_HRCDE     604     0029
    SAP_HRCDK     604     0029
    SAP_HRCES     604     0029
    SAP_HRCFI     604     0029
    SAP_HRCFR     604     0029
    SAP_HRCGB     604     0031
    SAP_HRCHK     604     0029
    SAP_HRCID     604     0029
    SAP_HRCIE     604     0029
    SAP_HRCIN     604     0029
    SAP_HRCIT     604     0029
    SAP_HRCJP     604     0029
    SAP_HRCKR     604     0029
    SAP_HRCMX     604     0029
    SAP_HRCMY     604     0029
    SAP_HRCNL     604     0029
    SAP_HRCNO     604     0029
    SAP_HRCNZ     604     0029
    SAP_HRCPH     604     0029
    SAP_HRCPT     604     0029
    SAP_HRCRU     604     0029
    SAP_HRCSE     604     0029
    SAP_HRCSG     604     0029
    SAP_HRCTH     604     0029
    SAP_HRCTW     604     0029
    SAP_HRCUN     604     0029
    SAP_HRCUS     604     0029
    SAP_HRCVE     604     0029
    SAP_HRCZA     604     0029
    SAP_HRGXX     604     0029
    SAP_HRRXX     604     0029
    EA-IPPE     400     0018
    EA-APPL     604     0008
    EA-DFPS     600     0018
    EA-FINSERV     604     0007
    EA-GLTRADE     604     0008
    EA-HR     604     0029
    EA-HRCAR     604     0029
    EA-HRCAT     604     0029
    EA-HRCAU     604     0029
    EA-HRCBE     604     0029
    EA-HRCBR     604     0029
    EA-HRCCA     604     0029
    EA-HRCCH     604     0029
    EA-HRCCN     604     0029
    EA-HRCDE     604     0029
    EA-HRCDK     604     0029
    EA-HRCES     604     0029
    EA-HRCFI     604     0029
    EA-HRCFR     604     0029
    EA-HRCGB     604     0029
    EA-HRCHK     604     0029
    EA-HRCID     604     0029
    EA-HRCIE     604     0029
    EA-HRCIN     604     0029
    EA-HRCIT     604     0029
    EA-HRCJP     604     0029
    EA-HRCKR     604     0029
    EA-HRCMX     604     0029
    EA-HRCMY     604     0029
    EA-HRCNL     604     0029
    EA-HRCNO     604     0029
    EA-HRCNZ     604     0029
    EA-HRCPH     604     0029
    EA-HRCPT     604     0029
    EA-HRCRU     604     0029
    EA-HRCSE     604     0029
    EA-HRCSG     604     0029
    EA-HRCTH     604     0029
    EA-HRCTW     604     0029
    EA-HRCUN     604     0029
    EA-HRCUS     604     0029
    EA-HRCVE     604     0029
    EA-HRCZA     604     0029
    EA-HRGXX     604     0029
    EA-HRRXX     604     0029
    EA-PS     604     0007
    EA-RETAIL     604     0007
    FINBASIS     604     0008
    ECC-DIMP     600     0018
    ERECRUIT     604     0008
    FI-CA     604     0008
    FI-CAX     604     0007
    INSURANCE     600     0018
    IS-CWM     600     0018
    IS-H     600     0024
    IS-M     600     0018
    IS-OIL     600     0018
    IS-PS-CA     604     0007
    IS-UT     600     0018
    LSOFE     600     0018
    SEM-BW     604     0008
    ST-A/PI     01M_ECC600     0001
    Regards
    Edited by: satheesh0812 on Nov 17, 2011 7:57 AM

    Hi Sateesh,
    SAP_ABA 701 0007
    SAP_BASIS 701 0007
    PI_BASIS 701 0007
    ST-PI 2008_1_700 0003
    SAP_BS_FND 701 0008
    SAP_BW 701 0007
    SAP_AP 700 0021
    WEBCUIF 700 0008
    SAP_APPL 604 0008
    Based on the component information provided by you, I can conclude that your system is ECC 6.0 EHP4.
    EHP4 is derived from your component SAP_APPL 604.
    In addition to this your EHP4 system has NW stack on NW 7.0 EHP1.
    Hence your system is ECC 6.0 EHP4 with NW 7.0 EHP1.
    Hope this answers your query.
    Regards,
    Deepak Kori

  • Error while uploading mpp file from OPENPS to SAP PS

    Hi,
    I am trying to upload project .mpp file from OPENPS to SAP PS with following feild:
    ID, Description, Task calander, Start Date, End Date, Object type
    but at the time of uploading it showing error:
    1: E CN194 The stauts could not be created while creating network.
    2. E BS001 No status object is available for wbs #
    3. E CN068 WBS element control area is not same as network control area.
    Kindly sugguest me to resolve all these issue.
    Mukul

    Hi,
    Are you creating new project or updating existing project ? from error it seems to be you are trying to update the existing project you are trying assign the network to WBS which are not having same controlling area and user staus is active.
    Please check your .mpp project data.
    regards,

  • Flat file to XML in SAP SFTP adapter

    Hello All
    I am trying to convert flat file to xml using SAP SFTP adapter.
    Flat File is like below:
    AABEN;20141106;20141106;45;0.00
    AABOL;20141106;20141106;45;0.00
    ABGRI;20141106;20141106;45;0.00
    ADDEA;20141106;20141106;45;0.00
    ALADA;20141106;20141106;45;58.43
    AMSCH;20141106;20141106;45;0.00
    ANOLV;20141106;20141106;45;0.00
    ANROY;20141106;20141106;45;0.00
    AVMCD;20141106;20141106;45;0.00
    Message Type structure I created like below
    In Server SFTP adapter in Module tab I am using "AF_Modules/MessageTransformBean" and conversion type ="StructPlain2XML"
    I am getting error = "Error: com.sap.aii.af.sdk.xi.adapter.trans.TransformException: Transformer Conversion3.0.5226 Error initializing Class: java.lang.Exception: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found (4408) Parameter 'xml.keyFieldName' is missing (4403) Parameter 'xml.keyFieldType' is missing (4403) ; nested exception caused by: java.lang.Exception: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found (4408) Parameter 'xml.keyFieldName' is missing (4403) Parameter 'xml.keyFieldType' is missing (4403) "
    I am not using any key field then please let me know how to overcome this issue.
    I searched on SDN but did not get any perfect answer.
    Thanks
    Dheeraj Kumar

    Hello Dheeraj,
    Thanks for your reply. I created a new discussion,
    Flatfile to XML
    Thanks well in advance for your help!
    -Satish.

  • How to copy/send text file from FTPS to SAP ECC File Port

    Hi Frdns,
    I am working on one design, actually my requirement as follows
    I am receiving financial information document from Banks, which is in the form of BIA2 message format, it looks like text file. This information needs to be sending to SAP ECC system.
    I identified some approaches to full fill the requirement
    1)Using Conversion agent/or third party tools to convert BIA2 message in to XML, then using PI I will pick up the XML message, convert it in to IDoc.
    2)Without any conversion I will copy the same file (original BIA2 message) in to SAP ECC file port, in this case no conversion required, calling some program I will schedule it.
    I am looking forward t implement the second approach because it saves lot of money to my client.
    Now I am wondering using File adapter can i copy to SAP ECC File Port or I required ABAP proxy?
    What is the best approach to copy the BIA message text file from FTPS to SAP ECC File Port.??
    Regards,
    Raj

    Hi Raja,
    >>Now I am wondering using File adapter can i copy to SAP ECC File Port or I required ABAP proxy?
    Yes you can do this copy, the only restriction that can happen is the file size.. If you are sure that the fiel will be of few MB at the max then you can use the Configuration part alone and copy it to ECC folder. For doing this you need the following:
    1. Sender agreement (mention the sender interface as anything XYZ)
    2. Sender communication channel. Pick the file in binary mode
    3. Receiver determination (keep both the sender and receiver service as same)
    4. Interface Detemiantion (dont specify any mapping and keep the receiver interface name as XYZ)
    5. Create receiver agreement (with same service and interface)
    6. Use file adapter here
    Regards
    Suraj

  • In Yahoo Mail, only Firefox, not IE, quits in attachment of photo while I am going through my file levels for specific photo.

    Using Firefox 6.0; I try to attach file to email, in this case a photo; the Yahoo dialog box shows and as I browse through file levels, when reaching photos, as I click the file holding photo want, the dialog box closes before I can choose. If I try to widen the dialog box, it freezes and after few moments goes back to position before I tried to attach. At that point the Attach button is frozen, and I have to close and restart Firefox. Don't have problem with IE. Seems to be only when attaching photos, not other files, i.e. Word or Excel.

    The direct way to contact Apple is by telephone, there's a Contact Us link at the bottom right of this page with worldwide contact numbers. We are users here, with no real power to contact Apple.

  • Powershell program to upload multiple files with version control at the file level

    I have a network folder which contains multiple files refreshed daily.I then run a power
    shell scrip which uploads all the files . I have scheduled it to run once
    daily. I have version control at the directory level , is there a way to upload all the files daily and maintain the last X versions for each file , rite now it does it at a folder level . I want it at a file level
    powershell script
    if((Get-PSSnapin "Microsoft.SharePoint.PowerShell") -eq $null)
    Add-PSSnapin Microsoft.SharePoint.PowerShell
    #Script settings
    $webUrl = "http://sharepoint.contoso.com/Corporate/Sales/"
    $docLibraryName = "Shared Documents"
    $docLibraryUrlName = "Shared Documents\arizona" # specify your subfolder url here
    $localFolderPath = "C:\Test"
    #Open web and library
    $web = Get-SPWeb $webUrl
    write-host $webUrl
    $docLibrary = $web.Lists[$docLibraryName]
    write-host $docLibrary
    $files = ([System.IO.DirectoryInfo] (Get-Item $localFolderPath)).GetFiles()
    write-host $files
    ForEach($file in $files)
    if($file.Name.Contains(".pdf"))
    write-host $file
    #Open file
    try
    $fileStream = ([System.IO.FileInfo] (Get-Item $file.FullName)).OpenRead()
    #Add file
    $folder = $web.getfolder($docLibraryUrlName)
    write-host "Copying file " $file.Name " to " $folder.ServerRelativeUrl "..."
    $spFile = $folder.Files.Add($folder.Url + "/" + $file.Name,[System.IO.Stream]$fileStream, $true)
    write-host "Success"
    #Close file stream
    $fileStream.Close();
    catch
    Write "Error: $file.name: $_" >>c:\logfile.txt
    continue;
    #Dispose web
    $web.Dispose()

    Check if this helps you
    http://blogs.technet.com/b/heyscriptingguy/archive/2013/04/28/weekend-scripter-use-powershell-to-upload-a-sharepoint-file-version.aspx
    # Add the Snapin
    Add-PSSnapin Microsoft.SharePoint.PowerShell
    # Retrieve specific Site
    $spWeb = Get-SPWeb http://SP01
    # Create instance of Folder
    $spFolder = $spWeb.GetFolder("Shared Documents")
    # Get the file on Disk that we want to upload
    $file = Get-Item C:\Documents\MyDoc.docx
    # upload the file.
    $spFolder.Files.Add("Shared Documents/MyDoc.docx",$file.OpenRead(),$false)
    $newVersion = $spFolder.Files.Add($spFile.Name, $file.OpenRead(), $spFile.Author, $spFile.ModifiedBy, $spFile.TimeCreated, (Get-Date))
    If this helped you resolve your issue, please mark it Answered

  • Transport layer SAP between development & quality

    Should we have to use two transport layers ( SAP& ZDEV(created )) between the development & quality system as their consolidate route  ?
    Transport layer
    SAP- Transport layer for SAP standard objects
    ZDEV- Transport layer between Devlopment & quality systems
    I assigned the consolidate route ZDEV between the Development & quality systems.Now ,How can I assign the transport layer SAP between the both systems as a consolidate route. Help me with your steps..

    HI,
    Z<SID> and SAP both are consolidation route as well as transport layer having different characteristic.
    ->A transport routes can be either a consolidation route or a delivery route. For a standard three-system
    landscape, the transport routes are as follows:
    -> A consolidation route connects the development system and the quality assurance system. This
    transport layer is named Z<SID>, where <SID> is the system ID of the development system.
    ->A delivery route is created between the quality assurance system and the production system.
    ->In the development system, if changes are made to objects whose development class refers to the
    (standard) transport layer corresponding to a consolidation route, these changes are recorded in
    requests and transported to the quality assurance system and then to the production system.
    If you change SAP objects, these changes are recorded in repairs, which can be transported in the
    same way but using the consolidation route "SAP".
    regards,
    kaushal

Maybe you are looking for

  • Safari 3.1. and Mac OSX 10.5.3

    Hi everybody, I accidentaly dumped Safari from my system because I never used it and I didn't like it very much. anyway, I am using Opera but to set Opera as my default Browser I need Safari to change this setting. So I downloaded the new 3.1. Safari

  • Chinese Characters in output file

    Hi All, We have recently made our SAP Unicode compliant. Now user started entering customer name in Chinese language. We have program to extract customer name. If I use following, then output file contains hash (#) OPEN DATASET file_name FOR OUTPUT I

  • Creating a preferences window

    Hi I wonder if there is any way to create in Director a preferences window (see example below). http://www.guide.lancs.ac.uk/tellguidemyname.html In particular what i would like to do is to allow my users to select the things they want to select from

  • How to disable only inactive firewall notification in the action center by GPO

    Hi I need to disable only inactive notifications firewall in the action center PCs through GPO. I have seen several posts and it seems possible disable by GPO only all notifications in the action center and not only firewall notifications. I have a D

  • Business content activation in fresh implementation

    Dear gurus Kindly excuse me if its an old cliched topic...I am new to implementation and i have been assigned to an end-to-end implementation project..my early work would be to know if standard business content available in BI will suffice our requir