File marshalling and unmarshalling exception
Hello All,
I just want to know that if I have an object which is serialized and another object which is not serialized then it is mandatory to serialize that object in the current example
For example
ArrayList is serialized by default.
So can this particular example run.
class ABC {
void go(){
ArrayList a = new ArrayList();
a.add(new ABC());
Do I need to serialize ABC also ?.
Thanks and regards,
Sachin
Why it has to be serialize. If ArrayList is
serializable then can't it hold the ABC object with
it ?. It can hold it but it can't serialize it.
The concept is dead simple really. If you want to Serialize a class then it must implement Serializable. It doesn't matter what the class is inside of or how many classes you have or anything else. Each and every class you want to serialize must implement Serializable.
Means seems I am confused with serialization.
Does anyone have a good tutorial on serialization ?.I don't think you really need a tutorial for a straightforward concept like this but http://java.sun.com/docs/books/tutorial/essential/io/providing.html
Similar Messages
-
Marshalling and Unmarshalling on xml
is this the one of the way of parsing xml??
If by "marshalling and Unmarshalling on xml" you mean converting between XML and Java, then yes, JAXB can be a viable alternative to SAX or DOM, depending on your requirements.
It is a simpler solution if it's the binding that you actually need.
If Java representation of XML isn't relevant and you're only concerned about firing events when a particular XML artifact is detected, then SAX would be more indicated.
Take the good habit of listing your actual requirements before considering a range of options. -
Hello! I have one iTunes library on my iPod and one iTunes library on my computer. When I connect my iPod touch to my PC, however, I cannot find any files in my iPod except for pictures. How can I find the music files so I can add them to my iTunes?
You can't do that.
And before you decide to store any music that you own on a computer at work, talk to your IT department. Many organizations do not permit it for legal reasons. Standard policies are that anything stored on company owned computers is the property of the company. It could not be legally stored on their machines unless you transfer the licenses and all copies, physical and digital, to the company, meaning you no longer own the music. If they were to be audited and could not prove that they own the music, they would be subject to copyright violation penalties. Just use your iPod when you're at the office if you want to listen to music. -
How can I get a file to copy all of the files in a directory except itself and the source of the copy function will be the directory the final program is in? This application must be in Lab View 8.
you mean something like this (see below)?
Now you may have to implement code to check if the destination folder exists and to create it, etc. But if you use the Front Panel Control to select the destination folder, it should be okay.
Not the best implementation, mind you but you'll get the idea..
Message Edited by JoeLabView on 04-18-2007 03:43 PM
Attachments:
copy folder contents.PNG 10 KB -
i just recently upgraded my itouch from 4.1 to ios 5, and updated to itunes 10.5. but when i synced my music files,ebooks and other apps, all is working except when im trying to sync my video files. it says, canot be synced as cannot be played on this ipod. but those are the same files that i have when i was using the old 4.1 version and its syncing just fine.. the itunes advanced tab "create iphone or ipod version" is not working either so i cant convert it to be xferred and synced. what can i do to have my video files synced?
i had the same problem but i just got a new video converter and made it convert videos to ipod/iphone format and then put them into itunes. i would suggest GOM encoder as the encoder can convert them and then once they're finished converting, put them automatically into your itunes for you. from there you can just sync them to your ipod.
-
File.delete() and File.deleteOnExit() doesn't work consistently..
I am seeing some odd behavior with trying to delete files that were opened. Usually just doing new File("file.txt").delete() would work. However, in this case, I have created an input stream to the file, read it in, saved it to another location (copied it), and now I am trying to delete it.
The odd thing is, in my simple application, the user can work with one file at a time, but I move "processed" files to a lower pane in a swing app. When they exit it, it then archives all the files in that lower pane. Usually every file but the last one opened deletes. However, I have seen odd behavior where by some files don't delete, sometimes all of them wont delete. I tried the deleteOnExit() call which to me should be done by the JVM after it has released all objects such that they don't matter and the JVM ignores any object refs and directly makes a call (through JNI perhaps) to the underlying OS to delete the file. This doesn't work either.
I am at a loss as to why sometimes some files delete, and other times they don't. In my processing code, I always close the input stream and set its variable to null. So I am not sure how it is possible a reference could still be held to the object representing the file on disk.and then, in the other class
public int cdplayerINIToMMCD(File aDatabase, String thePassword) throws IllegalArgumentException {
/*---------DATA---------*/
String dbLogin, dbPassword;
JFileChooser fc;
INIFileFilter ff;
int dialogReturnVal;
String nameChosen;
File INIFile;
ProgressMonitor progressMonitor;
BufferedReader inFileStream;
String oneLine;
int totalLines = 0;
int linesParsed = 0;
boolean openDBResult;
int hasPassword;
if ((aDatabase == null) || (!aDatabase.exists()) ||
(FileManagement.verifyMMCD(aDatabase) == FileManagement.VERIFY_FAILED)) {
throw new IllegalArgumentException();
else {
currentDB = aDatabase;
if(thePassword == null) {
dbPassword = "";
else { dbPassword = thePassword; }
dbLogin = dbPassword; //For MSAccess dbLogin == dbPassword
//Ask the user for the cdplayer.ini file.
//Create a file chooser
if (System.getProperty("os.name").indexOf("Windows") > -1) {
fc = new JFileChooser("C:\\Windows");
else {
fc = new JFileChooser();
fc.setMultiSelectionEnabled(false);
fc.setDragEnabled(false);
//Create a new FileFilter
ff = new INIFileFilter();
//Add this filter to our File chooser.
fc.addChoosableFileFilter(ff);
fc.setFileFilter(ff);
//Ask the user to locate it.
do {
dialogReturnVal = fc.showOpenDialog(mainFrame);
if (dialogReturnVal == JFileChooser.APPROVE_OPTION) {
nameChosen = fc.getSelectedFile().getAbsolutePath();
if(nameChosen.toLowerCase().endsWith(INIFileFilter.FILE_TYPE)) { INIFile=new File(nameChosen); }
else { INIFile = new File(nameChosen+INIFileFilter.FILE_TYPE); }
if (!INIFile.exists()) {
continue; //If the name specified does not exist, ask again.
else { break; }
else { //User clicked cancel in the open dialog.
//Ignore what we've done so far.
return(IMPORT_ABORTED);
} while(true); //Keep asking until cancelled or a valid file is specified.
//Determine how many lines will be parsed.
try {
//Open the INI for counting
inFileStream = new BufferedReader(new InputStreamReader(new FileInputStream(INIFile)));
while ((inFileStream.readLine()) != null) {
totalLines++;
//Close the INI file.
inFileStream.close();
} catch (IOException ex) { return(IMPORT_FAILED); }
//Make a progress monitor that will show progress while importing.
progressMonitor = new ProgressMonitor(mainFrame, "Importing file","", 0, totalLines);
progressMonitor.setProgress(0);
progressMonitor.setMillisToPopup(100);
progressMonitor.setMillisToDecideToPopup(1);
//Make our DatabaseHandler to insert results to the database.
dbh = new DatabaseHandler();
//Open the database connection.
do {
try {
openDBResult = dbh.openDBConnection(currentDB, dbLogin, dbPassword);
} catch(JDBCException ex) { return(IMPORT_JDBC_ERROR); } //OUCH! can't write anything.
catch(SQLException ex) {
openDBResult = DatabaseHandler.OPNCN_FAILED;
//Can not open the database. Is it password protected?
hasPassword = JOptionPane.showConfirmDialog(mainFrame, "Could not open the database. "+
"The password is wrong or you have not specified it.\n"+
"Do you want to enter one now?", "New password?", JOptionPane.YES_NO_OPTION);
if (hasPassword == MMCDCatalog.DLG_OPTN_YES) {
dbPassword = JOptionPane.showInputDialog(mainFrame, "Please enter your "+
"password for the DataBase:");
dbLogin = dbPassword; //For MSAccess, login == password
//If the password wasn't the problem, then we can't help it.
else { return(IMPORT_FAILED); }
} while(openDBResult != DatabaseHandler.OPNCN_OK); //If it is OK, no exception thrown.
//Import the ini file
try {
//Open the INI file for parsing.
inFileStream = new BufferedReader(new InputStreamReader(new FileInputStream(INIFile)));
//Read and parse the INI file. Save entries once parsed.
while ((oneLine = inFileStream.readLine()) != null) {
parseLine(oneLine);
linesParsed++;
progressMonitor.setNote("Entries imported so far: "+entriesImported);
progressMonitor.setProgress(linesParsed);
if ((progressMonitor.isCanceled()) || (linesParsed == progressMonitor.getMaximum())) {
progressMonitor.close();
break;
//Close the INI file.
inFileStream.close();
} catch (IOException ex) {
//Make absolutely sure the progressMonitor has disappeared
progressMonitor.close();
if (dbh.closeDBConnection() != DatabaseHandler.CLSCN_OK) {
JOptionPane.showMessageDialog(mainFrame, "Error while reading the INI file.\n"+
"Error while attempting to close the database", "Error", JOptionPane.INFORMATION_MESSAGE);
else {
JOptionPane.showMessageDialog(mainFrame, "Error while reading the INI file.",
"Error", JOptionPane.INFORMATION_MESSAGE);
return(IMPORT_FAILED);
//Make absolutely sure the progressMonitor has disappeared
progressMonitor.close();
//Close the database connection
if (dbh.closeDBConnection() != DatabaseHandler.CLSCN_OK) {
JOptionPane.showMessageDialog(mainFrame, "Error while closing the database after import.",
"Error", JOptionPane.INFORMATION_MESSAGE);
//Did the user cancel?
if (totalLines != linesParsed) {
return(IMPORT_ABORTED);
//Success!
//Everything ok. Return the number of entries imported.
return(entriesImported);
} -
A File Reference and its evolving life!
Hi all,
I've noticed something that came as a little bit of a surprise to me, but I think I have the explanation, at a hand-wavy higher level anyway. What I have not established is if this is a 'bug' or a 'feature', and if there are any ways the following issue can be avoided at the NI function/api layer.
Consider the file open and file close function. You open a file, you use the reference to the file to write/read data, then at some point you close the reference and the close function spits out the file-path. Here are a couple of tid-bits you may not be aware of (that are easy to test):
Q1) After your application opens/creates a file and starts using the file-reference to make file writes, if an external source changes the file-name of that file... guess what will happen on your next write function call?
A1:: The write successfully updates the newly re-named file with your new data without producing an error or a warning. (At least this is the case if your program is running on a vxWorks cRIO target and the file-name is changed directly on the cRIO via an FTP browser.)
Did this surprise you? It did surprise me! -My handwavy explanation is that the file-pointer is perhaps managed/maintained by the OS, so when the OS tells the file-system to rename that file, the pointer that LabVIEW holds remains valid and the contents of the memory at the pointer location was updated by the OS.
Q2) Continuing from the situation setup in Q1, after writing several new chunks of data to a file now currently named something completely different than when the file reference was originally created, you use the close function to close the file-reference. What do you expect on the file-path output from the close function?? What do you actually get??
A2:: The close function will 'happily' return the ORIGINAL file-name, not the actual file-name it has been successfully writing to(!). This has some potentially significant ramifications on how/what you can use that output for. At this point there is a ton of room for pontifications and more or less 'crazy' schemes for what one could do, but I argue that the bottom line is that your application has at that point completely lost the ability to accurately and securely track your file(s). Yes, you could list a folder and try and 'figure out' if your file-name was re-named during writing and you can in various ways make more or less good 'guesses' on which file you in reality just had open, but you can never really know for sure.
So, what do you guys think?? Is the behavior of returning the (incorrect) original file-path when you close the handle a BUG or a FEATURE?? Would it not be possible for LabVIEW to read back the data contained in the (OS?) pointer location and as needed update the file out path data when it closes a reference? Should we not EXPECT that this would be the behavior?
Q3) Again, continuning from the above situation, lets assume we are back at the state in Q1, writing data to a (re)named file. What happens if the file is deleted by an external process? What happens to the file reference? File function calls using the reference?
A3:: This one is less surprising. The file reference remains 'valid' (because it is a valid reference), but depending on the file function you are calling, you will get error such as error 6 (binary write reports this), or error 4 (a TDMS write will report this error), etc. So as long as you don't rely on file ref-num tests to establish if you are good to go with a file-write or file-action, you should be safe to recover in an appropriate way.. Just don't forget to close the file-reference, even if the file is 'gone', the reference will still remain in memory until you 'close' it (with an error)(?I might be wrong about this last part?)
I am not sure if the above is possible on e.g. Windows, Windows would probably prevent you from re-naming a file that has an open file-handle to it, but this is definitley observable on at least vxWorks cRIO targets. (I don't have PharLap ETS or RTLinux devices so I can't test on those targets.. if you want to test its pretty straigth forward to make a simple test app for it.)
[begin rant-mode related to why I found this out and why this behavior BITES]
There are situations where the above situation could cause some rather annoying issues that, for somewhat contrived reasons related to cRIO file API performance, CPU and memory resource management, are non-trivial to work around. for example, using the NI "list folder" to listing folders take a very hefty chunk of time at 100% cpu that you cannot break up, so polling/listing folders after every file update (or even on a less regular interval) is a big challenge, and if you are really unlucky (or didn't know any better) and gave the list command in a folder with 1000's of files (as opposed to less than about 100 files), the list will lock your CPU at 100% for 10's of seconds... Therefore, you might be tempted to maintain your own look-up table of files so that your application can upload/push/transfer and/or delete files as dictated by your application specific conditions... except that only works until some prankster or well-intention person remotes in and starts changing file-names, because then your carefully maintained list of file-names/paths' suddenly fall appart.
[\end rant]
QFang
CLD LabVIEW 7.1 to 2013Hey guys, thanks for turning out your comments on this thread!
-Deny Access : still able to re-name (and delete) the file via FTP browser (didn't test other file avenues). I think this is for the same reason that NI vxWorks targets (such as cRIO-9014) do not support the concept of different users with different rights, as such, everyone have access rights to everything at the OS level. Another issue for me would be that "Deny Access" does not work on TDMS file references, so even if it worked, it would not help me.
--> I strongly suspect that these things are non-issues or issues that can be properly managed, on the new NI LinuxRT targets since (the ftp is disabled by default) it supports user accounts and user restrictions on files/folders. The controller could simply create the files in a tree where 'nobody else' has write access.
Obviously nobody should mess around with files on a (running) cRIO, but customers don't always do what they are supposed to do.
As far as the 'resources' or overhead to update the file-refnum with the new information, this would not be needed to be done in a polling fashion, simply, when the file-close function is called, as part of that call it updates its internal register from the pointer data, so this should be a low overhead operation I would think? If that is a true concern, a boolean input defaulting to not updating or a separate 'advanced close' could be created?
I've included a zip with the LV2013 project and test VI's (one for tdms one for binary) that I've used. nothing fancy, but in the interest of full disclosure. The snippet is the 'binary file' test vi, in case you just want a quick peak:
Steve Bird's findings of (yet) another behavior on Pharlap systems is also very interesting, I think!!
[EDIT] JUST TO CLARIFY, on vxWorks, the re-named file keeps being successfully written to, unlike the PharLaps' empty file that Steve Bird found.
QFang
CLD LabVIEW 7.1 to 2013
Attachments:
cRIO Tests.7z 30 KB -
XP pro file sharing and guest password - how to enable guest password?
Hi,
I want to share files between two Windows XP pro computers. I would also like that these shares can only be accessed with a password.
Here's a description of my setup:
I have two laptops: over 1 yo Fujitsu-Siemens (FS) running on Windows XP pro (finnish) and a brand new Thinkpad T61 (TP) running on Windows XP pro (english). Both of theses computers have guest account enabled and these accounts have also been password protected. FS's guest account is called "vieras" because of the language settings and TP's guest account is of course just "guest". Guest account passwords have been enabled using "net user <user name> *".
I've disabled simple file sharing on both computers, set shared folder permission to only contain these users: TP - "Guest (TP\Guest)" and FS - "Vieras (FS\Vieras)". Both computers have F-secure on them so I've made firewall rules which enable following services both ways to a specific IP: Ping / ICMP echo request and reply ; Windows file sharing and network printers ; Windows network browsing ; ICMP / Internet Control Message Protocol. I've also enabled these services on Windows firewall.
These computers can connect to each other either via Wi-Fi access point (b-mode) or directly using an ad-hoc Wi-Fi configuration (g-mode). Obviously the latter is used for more bandwidth hungry file transfers. Also, sometimes a cross-over Ethernet cable is used as well for even faster file transfers.
Everything on my setup works just fine except just one thing. I connect to a shared resource by running the computer's IP address. When I connect from TP to FS it prompts for username and password. FS accepts both english and finnish names for the guest account provided that the password is correct. But here's the problem... When connecting from FS to TP _no password or username prompt appears_. If I browse TP's shared folder sessions (under My Computer -> manage) I can see that FS is logged on as "vieras" i.e. FS's guest account.
Since I enabled FS's network shares over a year a go I can't remember everything I did to make it work. Every relevant configuration on TP and FS seem to be identical (e.g. "Security settings -> local policies -> security options -> Accounts: limit local account use of blank passwords to console logon only -> enabled") but still TP accepts connections without password prompt.
I've tried to get TP's password prompts enabled for a while now without any success. I did a lot of searching on the subject but I could only find instructions on how to disable guest account password prompts for network shares.
Has anyone had similar experiences or does anyone know what I should try out next? Thanks...
Solved!
Go to Solution.Success!
I solved my problem by changing guest account passwords. I tried to keep things simple by using the same guest password on both computers. This however allowed FS to log on to TP without guest password for some unknown reason. My logic would tell me that having the same guest password would allow both computers to log in without password but this wasn't obviously the case. I guess Windows has its own logic that I can't figure out or this issue had something to do with different language setups. Anyhow my shares work now like I want them to work. -
I bought a pdf book last year and had no problem reading it for a few months then all of a sudden I could no longer open it and to this day. Any other pdf download off internet I can still open and read, except for that particular book. Operating system is Windows 7 Home Premium, Adobe Reader XI 11.0.07. When trying to open file I get msg "You did'nt login or your session has expired. Please log in to read this document for the first time". (Like I said I have read it before). So I log in but that prompts me to give the name of the file I want to export or convert to Word or something else, which is not what I want to do of course. I have not purchased any service from Adobe or Acrobat as I only need to read. Thanks for your help..
Thank you for your reply. Operating system is Windows 7 Home Premium, Adobe Reader XI 11.0.07. When trying to open file I get msg "You did'nt login or your session has expired. Please log in to read this document for the first time". (Like I said I have read it before). So I log in but that prompts me to give the name of the file I want to export or convert to Word or something else, which is not what I want to do of course. I have not purchased any service from Adobe or Acrobat as I only need to read. Thanks for your help.
-
Excel is throwing error when it click print : 'No printers are installed. To install a printer click the File tab, and then click Print. Click No Printers Installed, and then click Add Printer. Follow the instructions in the Add Printer dialog box'
Word, and powerpoint application are working fine.
Environment : Windows 7 64-bit, MS Office 2013 64-bit
Steps to recreate
(i) Create new user account and add to any group ( do not log on using this
account)
(ii) runas /user:<new user account> <fullpath>\excel.exe
it will ask password so enter on command prompt
(iii) open any excel document and click File->Print
(iv) verify result (it is failing) it pop ups below error
Error:`Microsoft Excel
No printers are installed. To install a printer click the File tab, and then click
Print. Click No Printers Installed, and then click Add Printer. Follow the
instructions in the Add Printer dialog box.Sorry for late reply i was not at work
I have a default set excel is still throwing error. Interestingly winword , powerpoint and publisher are working fine. I am able to print from all office applications except Excel.
Probably excel behaves differently from other office applications.
Probably it is a bug in excel
Workaround : Log on to a system once using newly created account then runas excel using this account then print works fine.
It means something in user profile should be configure to run excel print operation. Could you please somebody help what I need to configure in user profile that makes print operation success? -
Hi!
I have a WD my book external hard drive plugged into my imac and I want to share it over my network with my apple tv. I went into system preferences > sharing, checked "file sharing" and added my external hard drive to the shared folder. So now it is listed in "shared folders" but under "users" everything is grayed out (it says "read and write" for "everyone" - but "read and write" is grayed out, and it doesn't let me add or subtract users). Now I can access all of the folders I shared from my imac except for the externalhard drive. What's going on?Hi RRFS!,thanks for help.I forgot to tell that hard drive has 2 partitions 1:format :Mac OS Extended (Journaled) and that works properly,2:format:MS-DOS (FAT32) and when i "get info" for both :first has shering & permitions:You can read and write - with name and privilege, second has shaing & prermissions:You can read and write- without name and privilege
-
hi could anyone give code for filename and file path name from application and presentation server....
I need to give file name and file path on selection screen for both the servers....Hi Abhay,
Refer to the below code:
*& Report ZHYPERION *
*& Project : SubSea7
Created on : 07/02/2007
Created by : Puneet Jhari.
*& Purpose : For SAP Interface download Hyperion.
REPORT zhyperion NO STANDARD PAGE HEADING MESSAGE-ID zhyper.
Start of Data Declaration
TYPE-POOLS : truxs,vrm.
TABLES : glpct,cepc.
DATA : var TYPE i,
total TYPE f.
DATA : BEGIN OF wa2,
ryear LIKE glpct-ryear,
rbukrs LIKE glpct-rbukrs,
racct LIKE glpct-racct,
ksl01 LIKE glpct-ksl01,
END OF wa2.
DATA : BEGIN OF wa3,
ryear LIKE glpct-ryear,
rbukrs LIKE glpct-rbukrs,
racct LIKE glpct-racct,
ksl01 LIKE glpct-ksl01,
END OF wa3.
DATA : BEGIN OF wa4,
racct LIKE glpct-racct,
END OF wa4.
DATA : BEGIN OF wa5,
rbukrs LIKE glpct-rbukrs,
racct LIKE glpct-racct,
total1(8) TYPE p DECIMALS 2,
END OF wa5.
DATA : BEGIN OF wa9,
khinr LIKE cepc-khinr,
racct LIKE glpct-racct,
total1(8) TYPE p DECIMALS 2,
END OF wa9.
DATA : BEGIN OF wa6,
khinr LIKE cepc-khinr,
prctr LIKE cepc-prctr,
rprctr LIKE glpct-rprctr,
ryear LIKE glpct-ryear,
rbukrs LIKE glpct-rbukrs,
racct LIKE glpct-racct,
ksl01 LIKE glpct-ksl01,
END OF wa6.
DATA : BEGIN OF wa7,
khinr LIKE cepc-khinr,
prctr LIKE cepc-prctr,
rprctr LIKE glpct-rprctr,
ryear LIKE glpct-ryear,
rbukrs LIKE glpct-rbukrs,
racct LIKE glpct-racct,
ksl01 LIKE glpct-ksl01,
END OF wa7.
DATA : itab3 LIKE TABLE OF wa2,
itab4 LIKE TABLE OF wa3,
itab5 LIKE TABLE OF wa4 WITH HEADER LINE,
itab6 LIKE TABLE OF wa5 WITH HEADER LINE,
itab7 LIKE TABLE OF wa6,
itab8 LIKE TABLE OF wa7,
itab10 LIKE TABLE OF wa9.
DATA : flag(1) TYPE c,
temp(6) TYPE c.
DATA : itab2 TYPE truxs_t_text_data,
itab9 TYPE truxs_t_text_data WITH HEADER LINE.
DATA : name TYPE vrm_id,
list TYPE vrm_values,
value LIKE LINE OF list,
FILNAM11 TYPE STRING,
FILNAM21 TYPE STRING.
End of Data Declaration
Begin of Selection Screen
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: r1 DEFAULT 'X' RADIOBUTTON GROUP g1 USER-COMMAND rad1,
r2 RADIOBUTTON GROUP g1 .
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-005.
PARAMETERS: rbukrs1 TYPE glpct-rbukrs MODIF ID ful,
khinr1 TYPE cepc-khinr AS LISTBOX VISIBLE LENGTH 20
MODIF ID sam ,
ryear1 TYPE glpct-ryear MODIF ID ful,
ryear2 TYPE glpct-ryear MODIF ID sam,
rpmax1 TYPE i MODIF ID ful,
rpmax2 TYPE i MODIF ID sam,
filnam1 TYPE rlgrap-filename MODIF ID ful,
filnam2 TYPE RLGRAP-FILENAME MODIF ID sam.
SELECTION-SCREEN END OF BLOCK b3.
End of Selection Screen
AT SELECTION-SCREEN OUTPUT
AT SELECTION-SCREEN OUTPUT.
PERFORM populate. "For populating the drop-down list.
CLEAR VALUE.
REFRESH LIST.
NAME = 'KHINR1'.
VALUE-KEY = '1S7_NOCASV'.
VALUE-TEXT = '1S7_NOCASV'.
APPEND VALUE TO LIST.
VALUE-KEY = '1S7_NOCJOT'.
VALUE-TEXT = '1S7_NOCJOT'.
APPEND VALUE TO LIST.
LOOP AT SCREEN. "For toggling between the selection screens.
IF r1 EQ 'X'.
IF screen-group1 = 'SAM'.
screen-active = 0.
ENDIF.
ELSEIF r2 EQ 'X'.
IF screen-group1 = 'FUL'.
screen-active = 0.
ENDIF.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
For the Drop-Down Listbox
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
id = name
values = list
EXCEPTIONS
ID_ILLEGAL_NAME = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Begin of Data Selection
START-OF-SELECTION.
When Company Code radio button is selected.
IF r1 EQ 'X'. "If Company Code radio button is selected.
IF rbukrs1 IS INITIAL.
MESSAGE i002.
LEAVE TO SCREEN 1000.
ENDIF.
IF rpmax1 IS INITIAL.
MESSAGE i002.
LEAVE TO SCREEN 1000.
ENDIF.
IF ryear1 IS INITIAL.
MESSAGE i002.
LEAVE TO SCREEN 1000.
ENDIF.
IF filnam1 IS INITIAL.
MESSAGE i002.
LEAVE TO SCREEN 1000.
ENDIF.
MOVE FILNAM1 TO FILNAM11.
CASE rpmax1.
WHEN '01'.
SELECT ryear rbukrs racct ksl01
FROM glpct INTO TABLE itab3 WHERE rbukrs EQ rbukrs1 AND ryear EQ ryear1.
WHEN '02'.
SELECT ryear rbukrs racct ksl02
FROM glpct INTO TABLE itab3 WHERE rbukrs EQ rbukrs1 AND ryear EQ ryear1.
WHEN '03'.
SELECT ryear rbukrs racct ksl03
FROM glpct INTO TABLE itab3 WHERE rbukrs EQ rbukrs1 AND ryear EQ ryear1.
WHEN '04'.
SELECT ryear rbukrs racct ksl04
FROM glpct INTO TABLE itab3 WHERE rbukrs EQ rbukrs1 AND ryear EQ ryear1.
WHEN '05'.
SELECT ryear rbukrs racct ksl05
FROM glpct INTO TABLE itab3 WHERE rbukrs EQ rbukrs1 AND ryear EQ ryear1.
WHEN '06'.
SELECT ryear rbukrs racct ksl06
FROM glpct INTO TABLE itab3 WHERE rbukrs EQ rbukrs1 AND ryear EQ ryear1.
WHEN '07'.
SELECT ryear rbukrs racct ksl07
FROM glpct INTO TABLE itab3 WHERE rbukrs EQ rbukrs1 AND ryear EQ ryear1.
WHEN '08'.
SELECT ryear rbukrs racct ksl08
FROM glpct INTO TABLE itab3 WHERE rbukrs EQ rbukrs1 AND ryear EQ ryear1.
WHEN '09'.
SELECT ryear rbukrs racct ksl09
FROM glpct INTO TABLE itab3 WHERE rbukrs EQ rbukrs1 AND ryear EQ ryear1.
WHEN '10'.
SELECT ryear rbukrs racct ksl10
FROM glpct INTO TABLE itab3 WHERE rbukrs EQ rbukrs1 AND ryear EQ ryear1.
WHEN '11'.
SELECT ryear rbukrs racct ksl11
FROM glpct INTO TABLE itab3 WHERE rbukrs EQ rbukrs1 AND ryear EQ ryear1.
WHEN '12'.
SELECT ryear rbukrs racct ksl12
FROM glpct INTO TABLE itab3 WHERE rbukrs EQ rbukrs1 AND ryear EQ ryear1.
WHEN '13'.
SELECT ryear rbukrs racct ksl13
FROM glpct INTO TABLE itab3 WHERE rbukrs EQ rbukrs1 AND ryear EQ ryear1.
WHEN '14'.
SELECT ryear rbukrs racct ksl14
FROM glpct INTO TABLE itab3 WHERE rbukrs EQ rbukrs1 AND ryear EQ ryear1.
WHEN '15'.
SELECT ryear rbukrs racct ksl15
FROM glpct INTO TABLE itab3 WHERE rbukrs EQ rbukrs1 AND ryear EQ ryear1.
WHEN '16'.
SELECT ryear rbukrs racct ksl16
FROM glpct INTO TABLE itab3 WHERE rbukrs EQ rbukrs1 AND ryear EQ ryear1.
ENDCASE.
MOVE itab3 TO itab4.
LOOP AT itab3 INTO wa2.
flag = 0.
LOOP AT itab5 INTO wa4.
IF wa2-racct EQ wa4-racct.
flag = 1.
EXIT.
ENDIF.
ENDLOOP.
DELETE ADJACENT DUPLICATES FROM itab5.
IF flag = 1.
CONTINUE.
ENDIF.
LOOP AT itab4 INTO wa3.
IF wa2-rbukrs EQ wa3-rbukrs AND wa2-racct EQ wa3-racct AND
wa2-ryear EQ wa3-ryear.
total = total + wa3-ksl01.
ENDIF.
ENDLOOP.
wa5-rbukrs = wa2-rbukrs.
wa5-racct = wa2-racct+4(6).
wa5-total1 = total.
APPEND wa5 TO itab6.
CLEAR total.
APPEND wa2-racct TO itab5.
ENDLOOP.
If no data is available corresponding to the values entered.
IF itab6[] IS INITIAL.
MESSAGE i003.
ENDIF.
For making the file Comma separated
CALL FUNCTION 'SAP_CONVERT_TO_TEX_FORMAT'
EXPORTING
i_field_seperator = ','
I_LINE_HEADER =
I_FILENAME =
I_APPL_KEEP = ' '
TABLES
i_tab_sap_data = itab6
CHANGING
i_tab_converted_data = itab2
EXCEPTIONS
CONVERSION_FAILED = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
For downloading it to the Presentation Server
MOVE itab2[] TO itab9[].
OPEN DATASET filnam1 FOR OUTPUT IN LEGACY TEXT MODE.
LOOP AT itab9.
TRANSFER itab9 TO filnam1.
ENDLOOP.
CLOSE DATASET filnam1.
IF sy-subrc EQ 0.
MESSAGE s004.
ENDIF.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE =
filename = FILNAM11
FILETYPE = 'ASC'
APPEND = ' '
WRITE_FIELD_SEPARATOR = ' '
HEADER = '00'
TRUNC_TRAILING_BLANKS = ' '
WRITE_LF = 'X'
COL_SELECT = ' '
COL_SELECT_MASK = ' '
DAT_MODE = ' '
CONFIRM_OVERWRITE = ' '
NO_AUTH_CHECK = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
WRITE_BOM = ' '
TRUNC_TRAILING_BLANKS_EOL = 'X'
WK1_N_FORMAT = ' '
WK1_N_SIZE = ' '
WK1_T_FORMAT = ' '
WK1_T_SIZE = ' '
WRITE_LF_AFTER_LAST_LINE = ABAP_TRUE
IMPORTING
FILELENGTH =
tables
data_tab = itab2
FIELDNAMES =
EXCEPTIONS
FILE_WRITE_ERROR = 1
NO_BATCH = 2
GUI_REFUSE_FILETRANSFER = 3
INVALID_TYPE = 4
NO_AUTHORITY = 5
UNKNOWN_ERROR = 6
HEADER_NOT_ALLOWED = 7
SEPARATOR_NOT_ALLOWED = 8
FILESIZE_NOT_ALLOWED = 9
HEADER_TOO_LONG = 10
DP_ERROR_CREATE = 11
DP_ERROR_SEND = 12
DP_ERROR_WRITE = 13
UNKNOWN_DP_ERROR = 14
ACCESS_DENIED = 15
DP_OUT_OF_MEMORY = 16
DISK_FULL = 17
DP_TIMEOUT = 18
FILE_NOT_FOUND = 19
DATAPROVIDER_EXCEPTION = 20
CONTROL_FLUSH_ERROR = 21
OTHERS = 22
IF sy-subrc eq 0.
message s004.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
When Region radio button is selected.
ELSEIF r2 EQ 'X'.
IF khinr1 IS INITIAL.
MESSAGE i002.
LEAVE TO SCREEN 1000.
ENDIF.
IF rpmax2 IS INITIAL.
MESSAGE i002.
LEAVE TO SCREEN 1000.
ENDIF.
IF ryear2 IS INITIAL.
MESSAGE i002.
LEAVE TO SCREEN 1000.
ENDIF.
IF filnam2 IS INITIAL.
MESSAGE i002.
LEAVE TO SCREEN 1000.
ENDIF.
MOVE FILNAM2 TO FILNAM21.
CASE rpmax2.
WHEN '01'.
SELECT ckhinr cprctr grprctr gryear grbukrs gracct g~ksl01
INTO CORRESPONDING FIELDS OF TABLE itab7
FROM ( glpct AS g
INNER JOIN cepc AS c ON grprctr = cprctr )
WHERE c~khinr = khinr1 AND
g~ryear = ryear2.
WHEN '02'.
SELECT ckhinr cprctr grprctr gryear grbukrs gracct g~ksl02
INTO CORRESPONDING FIELDS OF TABLE itab7
FROM ( glpct AS g
INNER JOIN cepc AS c ON grprctr = cprctr )
WHERE c~khinr = khinr1 AND
g~ryear = ryear2.
WHEN '03'.
SELECT ckhinr cprctr grprctr gryear grbukrs gracct g~ksl03
INTO CORRESPONDING FIELDS OF TABLE itab7
FROM ( glpct AS g
INNER JOIN cepc AS c ON grprctr = cprctr )
WHERE c~khinr = khinr1 AND
g~ryear = ryear2.
WHEN '04'.
SELECT ckhinr cprctr grprctr gryear grbukrs gracct g~ksl04
INTO CORRESPONDING FIELDS OF TABLE itab7
FROM ( glpct AS g
INNER JOIN cepc AS c ON grprctr = cprctr )
WHERE c~khinr = khinr1 AND
g~ryear = ryear2.
WHEN '05'.
SELECT ckhinr cprctr grprctr gryear grbukrs gracct g~ksl05
INTO CORRESPONDING FIELDS OF TABLE itab7
FROM ( glpct AS g
INNER JOIN cepc AS c ON grprctr = cprctr )
WHERE c~khinr = khinr1 AND
g~ryear = ryear2.
WHEN '06'.
SELECT ckhinr cprctr grprctr gryear grbukrs gracct g~ksl06
INTO CORRESPONDING FIELDS OF TABLE itab7
FROM ( glpct AS g
INNER JOIN cepc AS c ON grprctr = cprctr )
WHERE c~khinr = khinr1 AND
g~ryear = ryear2.
WHEN '07'.
SELECT ckhinr cprctr grprctr gryear grbukrs gracct g~ksl07
INTO CORRESPONDING FIELDS OF TABLE itab7
FROM ( glpct AS g
INNER JOIN cepc AS c ON grprctr = cprctr )
WHERE c~khinr = khinr1 AND
g~ryear = ryear2.
WHEN '08'.
SELECT ckhinr cprctr grprctr gryear grbukrs gracct g~ksl08
INTO CORRESPONDING FIELDS OF TABLE itab7
FROM ( glpct AS g
INNER JOIN cepc AS c ON grprctr = cprctr )
WHERE c~khinr = khinr1 AND
g~ryear = ryear2.
WHEN '09'.
SELECT ckhinr cprctr grprctr gryear grbukrs gracct g~ksl09
INTO CORRESPONDING FIELDS OF TABLE itab7
FROM ( glpct AS g
INNER JOIN cepc AS c ON grprctr = cprctr )
WHERE c~khinr = khinr1 AND
g~ryear = ryear2.
WHEN '10'.
SELECT ckhinr cprctr grprctr gryear grbukrs gracct g~ksl10
INTO CORRESPONDING FIELDS OF TABLE itab7
FROM ( glpct AS g
INNER JOIN cepc AS c ON grprctr = cprctr )
WHERE c~khinr = khinr1 AND
g~ryear = ryear2.
WHEN '11'.
SELECT ckhinr cprctr grprctr gryear grbukrs gracct g~ksl11
INTO CORRESPONDING FIELDS OF TABLE itab7
FROM ( glpct AS g
INNER JOIN cepc AS c ON grprctr = cprctr )
WHERE c~khinr = khinr1 AND
g~ryear = ryear2.
WHEN '12'.
SELECT ckhinr cprctr grprctr gryear grbukrs gracct g~ksl12
INTO CORRESPONDING FIELDS OF TABLE itab7
FROM ( glpct AS g
INNER JOIN cepc AS c ON grprctr = cprctr )
WHERE c~khinr = khinr1 AND
g~ryear = ryear2.
WHEN '13'.
SELECT ckhinr cprctr grprctr gryear grbukrs gracct g~ksl13
INTO CORRESPONDING FIELDS OF TABLE itab7
FROM ( glpct AS g
INNER JOIN cepc AS c ON grprctr = cprctr )
WHERE c~khinr = khinr1 AND
g~ryear = ryear2.
WHEN '14'.
SELECT ckhinr cprctr grprctr gryear grbukrs gracct g~ksl14
INTO CORRESPONDING FIELDS OF TABLE itab7
FROM ( glpct AS g
INNER JOIN cepc AS c ON grprctr = cprctr )
WHERE c~khinr = khinr1 AND
g~ryear = ryear2.
WHEN '15'.
SELECT ckhinr cprctr grprctr gryear grbukrs gracct g~ksl15
INTO CORRESPONDING FIELDS OF TABLE itab7
FROM ( glpct AS g
INNER JOIN cepc AS c ON grprctr = cprctr )
WHERE c~khinr = khinr1 AND
g~ryear = ryear2.
WHEN '16'.
SELECT ckhinr cprctr grprctr gryear grbukrs gracct g~ksl16
INTO CORRESPONDING FIELDS OF TABLE itab7
FROM ( glpct AS g
INNER JOIN cepc AS c ON grprctr = cprctr )
WHERE c~khinr = khinr1 AND
g~ryear = ryear2.
ENDCASE.
MOVE itab7 TO itab8.
LOOP AT itab7 INTO wa6.
flag = 0.
LOOP AT itab5 INTO wa4.
IF wa6-racct EQ wa4-racct.
flag = 1.
EXIT.
ENDIF.
ENDLOOP.
DELETE ADJACENT DUPLICATES FROM itab5.
IF flag = 1.
CONTINUE.
ENDIF.
LOOP AT itab8 INTO wa7.
IF wa6-rbukrs EQ wa7-rbukrs AND wa6-racct EQ wa7-racct AND
wa6-ryear EQ wa7-ryear.
total = total + wa7-ksl01.
ENDIF.
ENDLOOP.
wa9-khinr = khinr1.
wa9-racct = wa6-racct+4(6).
wa9-total1 = total.
APPEND wa9 TO itab10.
CLEAR total.
APPEND wa6-racct TO itab5.
ENDLOOP.
*If no data is available corresponding to the values entered.
IF itab10 IS INITIAL.
MESSAGE i003.
ENDIF.
For making the file Comma separated
CALL FUNCTION 'SAP_CONVERT_TO_TEX_FORMAT'
EXPORTING
i_field_seperator = ','
I_LINE_HEADER =
I_FILENAME =
I_APPL_KEEP = ' '
TABLES
i_tab_sap_data = itab10
CHANGING
i_tab_converted_data = itab2
EXCEPTIONS
CONVERSION_FAILED = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
For downloading it to the Presentation Server
MOVE itab2[] TO itab9[].
OPEN DATASET filnam2 FOR OUTPUT IN LEGACY TEXT MODE.
LOOP AT itab9.
TRANSFER itab9 TO filnam2.
ENDLOOP.
CLOSE DATASET filnam2.
IF sy-subrc EQ 0.
MESSAGE s004.
ENDIF.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE =
filename = FILNAM21
FILETYPE = 'ASC'
APPEND = ' '
WRITE_FIELD_SEPARATOR = ' '
HEADER = '00'
TRUNC_TRAILING_BLANKS = ' '
WRITE_LF = 'X'
COL_SELECT = ' '
COL_SELECT_MASK = ' '
DAT_MODE = ' '
CONFIRM_OVERWRITE = ' '
NO_AUTH_CHECK = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
WRITE_BOM = ' '
TRUNC_TRAILING_BLANKS_EOL = 'X'
WK1_N_FORMAT = ' '
WK1_N_SIZE = ' '
WK1_T_FORMAT = ' '
WK1_T_SIZE = ' '
WRITE_LF_AFTER_LAST_LINE = ABAP_TRUE
IMPORTING
FILELENGTH =
tables
data_tab = itab2
FIELDNAMES =
EXCEPTIONS
FILE_WRITE_ERROR = 1
NO_BATCH = 2
GUI_REFUSE_FILETRANSFER = 3
INVALID_TYPE = 4
NO_AUTHORITY = 5
UNKNOWN_ERROR = 6
HEADER_NOT_ALLOWED = 7
SEPARATOR_NOT_ALLOWED = 8
FILESIZE_NOT_ALLOWED = 9
HEADER_TOO_LONG = 10
DP_ERROR_CREATE = 11
DP_ERROR_SEND = 12
DP_ERROR_WRITE = 13
UNKNOWN_DP_ERROR = 14
ACCESS_DENIED = 15
DP_OUT_OF_MEMORY = 16
DISK_FULL = 17
DP_TIMEOUT = 18
FILE_NOT_FOUND = 19
DATAPROVIDER_EXCEPTION = 20
CONTROL_FLUSH_ERROR = 21
OTHERS = 22
IF sy-subrc eq 0.
message s004.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
*& Form POPULATE
text
FORM populate.
CLEAR value.
REFRESH list.
name = 'KHINR1'.
value-key = '1S7_SUBSEA'.
value-text = '1S7_SUBSEA'.
APPEND value TO list.
value-key = '1S7_GEN'.
value-text = '1S7_GEN'.
APPEND value TO list.
value-key = '1S7'.
value-text = '1S7'.
APPEND value TO list.
value-key = '1S7_CORPTP'.
value-text = '1S7_CORPTP'.
APPEND value TO list.
value-key = '1S7_BRRE'.
value-text = '1S7_BRRE'.
APPEND value TO list.
value-key = '1S7_BRCON'.
value-text = '1S7_BRCON'.
APPEND value TO list.
value-key = '1S7_BRCJOB'.
value-text = '1S7_BRCJOB'.
APPEND value TO list.
value-key = '1S7_BRCJBU'.
value-text = '1S7_BRCJBU'.
APPEND value TO list.
value-key = '1S7_BRCJCO'.
value-text = '1S7_BRCJCO'.
APPEND value TO list.
value-key = '1S7_BRCJIR'.
value-text = '1S7_BRCJIR'.
APPEND value TO list.
value-key = '1S7_BRCJEN'.
value-text = '1S7_BRCJEN'.
APPEND value TO list.
value-key = '1S7_BRCJPI'.
value-text = '1S7_BRCJPI'.
APPEND value TO list.
value-key = '1S7_BRCJSU'.
value-text = '1S7_BRCJSU'.
APPEND value TO list.
value-key = '1S7_BRCJFL'.
value-text = '1S7_BRCJFL'.
APPEND value TO list.
value-key = '1S7_BRCJOT'.
value-text = '1S7_BRCJOT'.
APPEND value TO list.
value-key = '1S7_BRCASV'.
value-text = '1S7_BRCASV'.
APPEND value TO list.
value-key = '1S7_BRCASE'.
value-text = '1S7_BRCASE'.
APPEND value TO list.
value-key = '1S7_BRCOOC'.
value-text = '1S7_BRCOOC'.
APPEND value TO list.
value-key = '1S7_BRCOHD'.
value-text = '1S7_BRCOHD'.
APPEND value TO list.
value-key = '1S7_BRCGEN'.
value-text = '1S7_BRCGEN'.
APPEND value TO list.
value-key = '1S7_BRDRI'.
value-text = '1S7_BRDRI'.
APPEND value TO list.
value-key = '1S7_BRDJOB'.
value-text = '1S7_BRDJOB'.
APPEND value TO list.
value-key = '1S7_BRDASV'.
value-text = '1S7_BRDASV'.
APPEND value TO list.
value-key = '1S7_BRDASE'.
value-text = '1S7_BRDASE'.
APPEND value TO list.
value-key = '1S7_BRDAEW'.
value-text = '1S7_BRDAEW'.
APPEND value TO list.
value-key = '1S7_BRDAEO'.
value-text = '1S7_BRDAEO'.
APPEND value TO list.
value-key = '1S7_BRDAET'.
value-text = '1S7_BRDAET'.
APPEND value TO list.
value-key = '1S7_BRDOOC'.
value-text = '1S7_BRDOOC'.
APPEND value TO list.
value-key = '1S7_BRDOHD'.
value-text = '1S7_BRDOHD'.
APPEND value TO list.
value-key = '1S7_BRVER'.
value-text = '1S7_BRVER'.
APPEND value TO list.
value-key = '1S7_BRVJOB'.
value-text = '1S7_BRVJOB'.
APPEND value TO list.
value-key = '1S7_BRVASV'.
value-text = '1S7_BRVASV'.
APPEND value TO list.
value-key = '1S7_BRVASE'.
value-text = '1S7_BRVASE'.
APPEND value TO list.
value-key = '1S7_BRVOOC'.
value-text = '1S7_BRVOOC'.
APPEND value TO list.
value-key = '1S7_BRVOHD'.
value-text = '1S7_BRVOHD'.
APPEND value TO list.
value-key = '1S7_UKRE'.
value-text = '1S7_UKRE'.
APPEND value TO list.
value-key = '1S7_UKCON'.
value-text = '1S7_UKCON'.
APPEND value TO list.
value-key = '1S7_UKCJOB'.
value-text = '1S7_UKCJOB'.
APPEND value TO list.
value-key = '1S7_UKCJBU'.
value-text = '1S7_UKCJBU'.
APPEND value TO list.
value-key = '1S7_UKCJCO'.
value-text = '1S7_UKCJCO'.
APPEND value TO list.
value-key = '1S7_UKCJIR'.
value-text = '1S7_UKCJIR'.
APPEND value TO list.
value-key = '1S7_UKCJEN'.
value-text = '1S7_UKCJEN'.
APPEND value TO list.
value-key = '1S7_UKCJPI'.
value-text = '1S7_UKCJPI'.
APPEND value TO list.
value-key = '1S7_UKCJSU'.
value-text = '1S7_UKCJSU'.
APPEND value TO list.
value-key = '1S7_UKCJFL'.
value-text = '1S7_UKCJFL'.
APPEND value TO list.
value-key = '1S7_UKCJOT'.
value-text = '1S7_UKCJOT'.
APPEND value TO list.
value-key = '1S7_UKCASV'.
value-text = '1S7_UKCASV'.
APPEND value TO list.
value-key = '1S7_UKCASE'.
value-text = '1S7_UKCASE'.
APPEND value TO list.
value-key = '1S7_UKCOOC'.
value-text = '1S7_UKCOOC'.
APPEND value TO list.
value-key = '1S7_UKBA'.
value-text = '1S7_UKBA'.
APPEND value TO list.
value-key = '1S7_UKBATE'.
value-text = '1S7_UKBATE'.
APPEND value TO list.
value-key = '1S7_UKCOHD'.
value-text = '1S7_UKCOHD'.
APPEND value TO list.
value-key = '1S7_UKCGEN'.
value-text = '1S7_UKCGEN'.
APPEND value TO list.
value-key = '1S7_UKDRI'.
value-text = '1S7_UKDRI'.
APPEND value TO list.
value-key = '1S7_UKDJOB'.
value-text = '1S7_UKDJOB'.
APPEND value TO list.
value-key = '1S7_UKDASV'.
value-text = '1S7_UKDASV'.
APPEND value TO list.
value-key = '1S7_UKDASE'.
value-text = '1S7_UKDASE'.
APPEND value TO list.
value-key = '1S7_UKDAEW'.
value-text = '1S7_UKDAEW'.
APPEND value TO list.
value-key = '1S7_UKDAEO'.
value-text = '1S7_UKDAEO'.
APPEND value TO list.
value-key = '1S7_UKDAET'.
value-text = '1S7_UKDAET'.
APPEND value TO list.
value-key = '1S7_UKDOOC'.
value-text = '1S7_UKDOOC'.
APPEND value TO list.
value-key = '1S7_UKDOHD'.
value-text = '1S7_UKDOHD'.
APPEND value TO list.
value-key = '1S7_UKVER'.
value-text = '1S7_UKVER'.
APPEND value TO list.
value-key = '1S7_UKVJOB'.
value-text = '1S7_UKVJOB'.
APPEND value TO list.
value-key = '1S7_UKVASV'.
value-text = '1S7_UKVASV'.
APPEND value TO list.
value-key = '1S7_UKVASE'.
value-text = '1S7_UKVASE'.
APPEND value TO list.
value-key = '1S7_UKVOOC'.
value-text = '1S7_UKVOOC'.
APPEND value TO list.
value-key = '1S7_UKVOHD'.
value-text = '1S7_UKVOHD'.
APPEND value TO list.
value-key = '1S7_NORE'.
value-text = '1S7_NORE'.
APPEND value TO list.
value-key = '1S7_NOCON'.
value-text = '1S7_NOCON'.
APPEND value TO list.
value-key = '1S7_NOCJOB'.
value-text = '1S7_NOCJOB'.
APPEND value TO list.
value-key = '1S7_NOCJBU'.
value-text = '1S7_NOCJBU'.
APPEND value TO list.
value-key = '1S7_NOCJCO'.
value-text = '1S7_NOCJCO'.
APPEND value TO list.
value-key = '1S7_NOCJIR'.
value-text = '1S7_NOCJIR'.
APPEND value TO list.
value-key = '1S7_NOCJEN'.
value-text = '1S7_NOCJEN'.
APPEND value TO list.
value-key = '1S7_NOCJPI'.
value-text = '1S7_NOCJPI'.
APPEND value TO list.
value-key = '1S7_NOCJSU'.
value-text = '1S7_NOCJSU'.
APPEND value TO list.
value-key = '1S7_NOCJFL'.
value-text = '1S7_NOCJFL'.
APPEND value TO list.
value-key = '1S7_NOCJOT'.
value-text = '1S7_NOCJOT'.
APPEND value TO list.
value-key = '1S7_NOCASV'.
value-text = '1S7_NOCASV'.
APPEND value TO list.
value-key = '1S7_NOCASE'.
value-text = '1S7_NOCASE'.
APPEND value TO list.
value-key = '1S7_NOCOOC'.
value-text = '1S7_NOCOOC'.
APPEND value TO list.
value-key = '1S7_NOCOHD'.
value-text = '1S7_NOCOHD'.
APPEND value TO list.
value-key = '1S7_NOCGEN'.
value-text = '1S7_NOCGEN'.
APPEND value TO list.
value-key = '1S7_NODRI'.
value-text = '1S7_NODRI'.
APPEND value TO list.
value-key = '1S7_NODJOB'.
value-text = '1S7_NODJOB'.
APPEND value TO list.
value-key = '1S7_NODASV'.
value-text = '1S7_NODASV'.
APPEND value TO list.
value-key = '1S7_NODASE'.
value-text = '1S7_NODASE'.
APPEND value TO list.
value-key = '1S7_NODAEW'.
value-text = '1S7_NODAEW'.
APPEND value TO list.
value-key = '1S7_NODAEO'.
value-text = '1S7_NODAEO'.
APPEND value TO list.
value-key = '1S7_NODAET'.
value-text = '1S7_NODAET'.
APPEND value TO list.
value-key = '1S7_NODOOC'.
value-text = '1S7_NODOOC'.
APPEND value TO list.
value-key = '1S7_NODOHD'.
value-text = '1S7_NODOHD'.
APPEND value TO list.
value-key = '1S7_NOVER'.
value-text = '1S7_NOVER'.
APPEND value TO list.
value-key = '1S7_NOVJOB'.
value-text = '1S7_NOVJOB'.
APPEND value TO list.
value-key = '1S7_NOVASV'.
value-text = '1S7_NOVASV'.
APPEND value TO list.
value-key = '1S7_NOVASE'.
value-text = '1S7_NOVASE'.
APPEND value TO list.
value-key = '1S7_NOVOOC'.
value-text = '1S7_NOVOOC'.
APPEND value TO list.
value-key = '1S7_NOVOHD'.
value-text = '1S7_NOVOHD'.
APPEND value TO list.
value-key = '1S7_GORE'.
value-text = '1S7_GORE'.
APPEND value TO list.
value-key = '1S7_GOCON'.
value-text = '1S7_GOCON'.
APPEND value TO list.
value-key = '1S7_GOCJOB'.
value-text = '1S7_GOCJOB'.
APPEND value TO list.
value-key = '1S7_GOCJBU'.
value-text = '1S7_GOCJBU'.
APPEND value TO list.
value-key = '1S7_GOCJCO'.
value-text = '1S7_GOCJCO'.
APPEND value TO list.
value-key = '1S7_GOCJIR'.
value-text = '1S7_GOCJIR'.
APPEND value TO list.
value-key = '1S7_GOCJEN'.
value-text = '1S7_GOCJEN'.
APPEND value TO list.
value-key = '1S7_GOCJPI'.
value-text = '1S7_GOCJPI'.
APPEND value TO list.
value-key = '1S7_GOCJSU'.
value-text = '1S7_GOCJSU'.
APPEND value TO list.
value-key = '1S7_GOCJFL'.
value-text = '1S7_GOCJFL'.
APPEND value TO list.
value-key = '1S7_GOCJOT'.
value-text = '1S7_GOCJOT'.
APPEND value TO list.
value-key = '1S7_GOCASV'.
value-text = '1S7_GOCASV'.
APPEND value TO list.
value-key = '1S7_GOCASE'.
value-text = '1S7_GOCASE'.
APPEND value TO list.
value-key = '1S7_GOCOOC'.
value-text = '1S7_GOCOOC'.
APPEND value TO list.
value-key = '1S7_GOCOHD'.
value-text = '1S7_GOCOHD'.
APPEND value TO list.
value-key = '1S7_GOCGEN'.
value-text = '1S7_GOCGEN'.
APPEND value TO list.
value-key = '1S7_GODRI'.
value-text = '1S7_GODRI'.
APPEND value TO list.
value-key = '1S7_GODJOB'.
value-text = '1S7_GODJOB'.
APPEND value TO list.
value-key = '1S7_GODASV'.
value-text = '1S7_GODASV'.
APPEND value TO list.
value-key = '1S7_GODASE'.
value-text = '1S7_GODASE'.
APPEND value TO list.
value-key = '1S7_GODAEW'.
value-text = '1S7_GODAEW'.
APPEND value TO list.
value-key = '1S7_GODAEO'.
value-text = '1S7_GODAEO'.
APPEND value TO list.
value-key = '1S7_GODAET'.
value-text = '1S7_GODAET'.
APPEND value TO list.
value-key = '1S7_GODOOC'.
value-text = '1S7_GODOOC'.
APPEND value TO list.
value-key = '1S7_GODOHD'.
value-text = '1S7_GODOHD'.
APPEND value TO list.
value-key = '1S7_GOVER'.
value-text = '1S7_GOVER'.
APPEND value TO list.
value-key = '1S7_GOVJOB'.
value-text = '1S7_GOVJOB'.
APPEND value TO list.
value-key = '1S7_GOVASV'.
value-text = '1S7_GOVASV'.
APPEND value TO list.
value-key = '1S7_GOVASE'.
value-text = '1S7_GOVASE'.
APPEND value TO list.
value-key = '1S7_GOVOOC'.
value-text = '1S7_GOVOOC'.
APPEND value TO list.
value-key = '1S7_GOVOHD'.
value-text = '1S7_GOVOHD'.
APPEND value TO list.
value-key = '1S7_GVRE'.
value-text = '1S7_GVRE'.
APPEND value TO list.
value-key = '1S7_GVCON'.
value-text = '1S7_GVCON'.
APPEND value TO list.
value-key = '1S7_GVCJOB'.
value-text = '1S7_GVCJOB'.
APPEND value TO list.
value-key = '1S7_GVCJBU'.
value-text = '1S7_GVCJBU'.
APPEND value TO list.
value-key = '1S7_GVCJCO'.
value-text = '1S7_GVCJCO'.
APPEND value TO list.
value-key = '1S7_GVCJIR'.
value-text = '1S7_GVCJIR'.
APPEND value TO list.
value-key = '1S7_GVCJEN'.
value-text = '1S7_GVCJEN'.
APPEND value TO list.
value-key = '1S7_GVCJPI'.
value-text = '1S7_GVCJPI'.
APPEND value TO list.
value-key = '1S7_GVCJSU'.
value-text = '1S7_GVCJSU'.
APPEND value TO list.
value-key = '1S7_GVCJFL'.
value-text = '1S7_GVCJFL'.
APPEND value TO list.
value-key = '1S7_GVCJOT'.
value-text = '1S7_GVCJOT'.
APPEND value TO list.
value-key = '1S7_GVCASV'.
value-text = '1S7_GVCASV'.
APPEND value TO list.
value-key = '1S7_GVCASE'.
value-text = '1S7_GVCASE'.
APPEND value TO list.
value-key = '1S7_GVCOOC'.
value-text = '1S7_GVCOOC'.
APPEND value TO list.
value-key = '1S7_GVCOHD'.
value-text = '1S7_GVCOHD'.
APPEND value TO list.
value-key = '1S7_GVCGEN'.
value-text = '1S7_GVCGEN'.
APPEND value TO list.
value-key = '1S7_GVDRI'.
value-text = '1S7_GVDRI'.
APPEND value TO list.
value-key = '1S7_GVDJOB'.
value-text = '1S7_GVDJOB'.
APPEND value TO list.
value-key = '1S7_GVDASV'.
value-text = '1S7_GVDASV'.
APPEND value TO list.
value-key = '1S7_GVDASE'.
value-text = '1S7_GVDASE'.
APPEND value TO list.
value-key = '1S7_GVDOOC'.
value-text = '1S7_GVDOOC'.
APPEND value TO list.
value-key = '1S7_GVDOHD'.
value-text = '1S7_GVDOHD'.
APPEND value TO list.
value-key = '1S7_GVVER'.
value-text = '1S7_GVVER'.
APPEND value TO list.
value-key = '1S7_GVVJOB'.
value-text = '1S7_GVVJOB'.
APPEND value TO list.
value-key = '1S7_GVVASV'.
value-text = '1S7_GVVASV'.
APPEND value TO list.
value-key = '1S7_GVVASE'.
value-text = '1S7_GVVASE'.
APPEND value TO list.
value-key = '1S7_GVVOOC'.
value-text = '1S7_GVVOOC'.
APPEND value TO list.
value-key = '1S7_GVVOHD'.
value-text = '1S7_GVVOHD'.
APPEND value TO list.
value-key = '1S7_GCRE'.
value-text = '1S7_GCRE'.
APPEND value TO list.
value-key = '1S7_GCCON'.
value-text = '1S7_GCCON'.
APPEND value TO list.
value-key = '1S7_GCCJOB'.
value-text = '1S7_GCCJOB'.
APPEND value TO list.
value-key = '1S7_GCCJBU'.
value-text = '1S7_GCCJBU'.
APPEND value TO list.
value-key = '1S7_GCCJCO'.
value-text = '1S7_GCCJCO'.
APPEND value TO list.
value-key = '1S7_GCCJIR'.
value-text = '1S7_GCCJIR'.
APPEND value TO list.
value-key = '1S7_GCCJEN'.
value-text = '1S7_GCCJEN'.
APPEND value TO list.
value-key = '1S7_GCCJPI'.
value-text = '1S7_GCCJPI'.
APPEND value TO list.
value-key = '1S7_GCCJSU'.
value-text = '1S7_GCCJSU'.
APPEND value TO list.
value-key = '1S7_GCCJFL'.
value-text = '1S7_GCCJFL'.
APPEND value TO list.
value-key = '1S7_GCCJOT'.
value-text = '1S7_GCCJOT'.
APPEND value TO list.
value-key = '1S7_GCCASV'.
value-text = '1S7_GCCASV'.
APPEND value TO list.
value-key = '1S7_GCCASE'.
value-text = '1S7_GCCASE'.
APPEND value TO list.
value-key = '1S7_GCCOOC'.
value-text = '1S7_GCCOOC'.
APPEND value TO list.
value-key = '1S7_GCCOHD'.
value-text = '1S7_GCCOHD'.
APPEND value TO list.
value-key = '1S7_GCCRD'.
value-text = '1S7_GCCRD'.
APPEND value TO list.
value-key = '1S7_GCCGEN'.
value-text = '1S7_GCCGEN'.
APPEND value TO list.
value-key = '1S7_GCDRI'.
value-text = '1S7_GCDRI'.
APPEND value TO list.
value-key = '1S7_GCDJOB'.
value-text = '1S7_GCDJOB'.
APPEND value TO list.
value-key = '1S7_GCDASV'.
value-text = '1S7_GCDASV'.
APPEND value TO list.
value-key = '1S7_GCDASE'.
value-text = '1S7_GCDASE'.
APPEND value TO list.
value-key = '1S7_GCDOOC'.
value-text = '1S7_GCDOOC'.
APPEND value TO list.
value-key = '1S7_GCDOHD'.
value-text = '1S7_GCDOHD'.
APPEND value TO list.
value-key = '1S7_GCVER'.
value-text = '1S7_GCVER'.
APPEND value TO list.
value-key = '1S7_GCVJOB'.
value-text = '1S7_GCVJOB'.
APPEND value TO list.
value-key = '1S7_GCVASV'.
value-text = '1S7_GCVASV'.
APPEND value TO list.
value-key = '1S7_GCVASE'.
value-text = '1S7_GCVASE'.
APPEND value TO list.
value-key = '1S7_GCVOOC'.
value-text = '1S7_GCVOOC'.
APPEND value TO list.
value-key = '1S7_GCVOHD'.
value-text = '1S7_GCVOHD'.
APPEND value TO list.
value-key = '1S7_APRE'.
value-text = '1S7_APRE'.
APPEND value TO list. -
Function module for logical file path and name
Hello all,
I am wondering is there any function module available to translate a logical file path to a physical file path and a logical file name to a physical file name? Thanks a lot!
Regards,
AnyiPlease check the FM FILE_NAME_GET.
CALL FUNCTION <b>'FILE_GET_NAME'</b>
EXPORTING
logical_filename = 'ZDELCHKREP'
parameter_1 = it_cntry-cntry
IMPORTING
file_name = l_file
EXCEPTIONS
file_not_found = 08.
CALL FUNCTION <b>'FILE_GET_NAME_USING_PATH'</b> EXPORTING
logical_path = 'ZDELCHKREP'
file_name = l_file
IMPORTING
file_name_with_path = l_file.
Message was edited by: Anurag Bankley
Message was edited by: Anurag Bankley -
UDF to read a file name and use some of its contents to map fields in target.
I have a scenario where I need to take the month and year from the file name and map it to suitable fields in the target. Ex - filename_apr2014 from this i should be able to read the month and year and map it. How to do this? I tried the udf -
public String getFileName(Container container){
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String ourSourceFileName = conf.get(key);
return ourSourceFileName;
got this error while testing the mapping -
Runtime exception when processing target-field mapping /ns0:MT_<<>>_Output/I<<>>; root message: Exception:[java.lang.NullPointerException: while trying to invoke the method com.sap.aii.mapping.api.DynamicConfiguration.get(com.sap.aii.mapping.api.DynamicConfigurationKey) of a null object loaded from a local variable at slot 2] in class <<>> method getSourceFileName[com.sap.aii.mappingtool.tf7.rt.Context@5b04fc0f]
See error logs for detailsHi Satish - You declared "conf" twice.
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
UDF -
String filename = "";
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create( "http:/"+"/sap.com/xi/XI/System/File","FileName");
filename = conf.get(key);
return filename;
And did you define the variable slot 2 in any of your UDF's?
The above UDF return the filename and you should handle the sub string later.. -
UCM: File is missing. Exception type is 'java.lang.Throwable'.
We have been having an intermittent issue with SES crawling UCM's data. There is a loose correlation between the issue occurring and the following exception appearing in UCM's Content Server Log:
File is missing. Exception type is 'java.lang.Throwable'. [ Details ]
An error has occurred. The stack trace below shows more information.
!syFileMissing,42000034474,1,61242!syExceptionType,java.lang.Throwable
java.lang.Throwable
at intradoc.common.IdcLogWriter.doMessageAppend(IdcLogWriter.java:81)
at intradoc.common.Log.addMessage(Log.java:268)
at intradoc.common.Log.errorEx2(Log.java:216)
at intradoc.common.LoggingUtils.logMessage(LoggingUtils.java:97)
at intradoc.common.SystemUtils.reportErrorEx(SystemUtils.java:462)
at intradoc.common.SystemUtils.errEx(SystemUtils.java:547)
at intradoc.common.SystemUtils.err(SystemUtils.java:538)
at intradoc.indexer.CommonIndexerBulkLoader.handleLoadError(CommonIndexerBulkLoader.java:544)
at intradoc.indexer.CommonIndexerBulkLoader.loadRecordWebChange(CommonIndexerBulkLoader.java:205)
at intradoc.indexer.IndexerBulkLoader.createBulkLoad(IndexerBulkLoader.java:309)
at intradoc.indexer.IndexerBulkLoader.doWork(IndexerBulkLoader.java:164)
at intradoc.indexer.Indexer.doIndexing(Indexer.java:431)
at intradoc.indexer.Indexer.buildIndex(Indexer.java:340)
at intradoc.server.IndexerMonitor.doIndexing(IndexerMonitor.java:1012)
at intradoc.server.IndexerMonitor$4.run(IndexerMonitor.java:832)
Can anybody tell me what conditions would cause this error?well yes:
panel.addGLEventListener(new GLR());
"GLR" implements "GLEventListener" and defines the required methods
I installed the Netbeans OpenGL Pack on NetBeans 6.5 and there is a problem with that...mh :(
Ok I also tried to create a GLPanel-Sample-Project and modify it but netbeans don't know "javax.swing.GroupLayout;" I installed the JDK as well.
mh what can i do: try to fix my actual error or try to get GroupLayout in java.swing^^
Maybe you are looking for
-
Fonts in Reports 9i for RH Linux
I deployed my forms/reports application on 9iAS for linux. I have generally used Ariel font in all of my reports. Those reports which have bold font of Ariel print the text a bit larger and therefore my text is not printed fully. Reports having Ariel
-
Field Posting Key in BAPI_ACC_DOCUMENT_POST ?
Hi I need to post documents like FB01 , i'm already using BAPI_ACC_DOCUMENT_POST and it works so i can now create documents with the header and itmes positions , filling the tables header, accountreceivable items and currency items. I already found
-
Pulling Data from an imported web service into a data grid - Flex 3.0
Hi all, I have created a web service from Oracle using JDeveloper and imported it into my Fex 3 project, and I am trying to populate a data grid with the data from the web service. I was trying to emulate the example found in my Adobe Flex 3.0 for D
-
With this code : boardImage = createImage(view.width, view.height); try { BufferedImage bi = ImageIO.read(new File(boardImg)); boardGraph = boardImage.getGraphics(); boardGraph.drawImage(bi, 0, 0, null); I've got sometimes a blank image, I stop my pr
-
Help - french accents words not displaying/storing correctly in database
Hello - I have 2 databases running in 2 different character sets. I am able to insert the following french accents in both databases and stored correctly also in db and displayed correctly in sql plus - à À Ä ä Â â é É È è Ë ë Ê ê î Î ï Ï ç Ç Û û ô æ