File merge using BPM

Hi,
I am trying to merge few files using BPM . I have tried for splitting the files . Can any one guide me how to proceed with the correlation and Receiver Determinations.

hi,
chek the below blogs,
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
/people/narendra.jain/blog/2005/12/30/various-multi-mappings-and-optimizing-their-implementation-in-integration-processes-bpm-in-xi
Using a BPM to collect messages for a set interval of time
/people/daniel.graversen/blog/2006/09/07/using-a-bpm-to-collect-messages-for-a-set-interval-of-time
Illustration of Multi-Mapping and Message Split using BPM in SAP Exchange Infrastructure
/people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
Various multi-mappings and Optimizing their Implementation in Integration Processes (BPM) in XI.
/people/narendra.jain/blog/2005/12/30/various-multi-mappings-and-optimizing-their-implementation-in-integration-processes-bpm-in-xi
regards
chandra

Similar Messages

File to file error using BPM

Hi...
I am doing File to File scenario using BPM. I am getting the below error. Could you please help me out in this.
Runtime error
Unable to read payload from the message object

Check the mapping indepently i.e go to Interface Mapping and give the input xml from the SXMB_MONI and test it.
Probably problem with some tranformations ,format.
if problem persists
There seems to be an issue with the XML files.
Correct them and try to open the XML file in IE.
During the testing of the mapping, please set the trace level to all and test the mapping once again.
reward points if found helpfull
regards
chandra.k

File to file scenario using BPM

Hi,
Did you check in RWB--Communication channel monitoring or SXMB_MONI for the reason?
Thanks!

Hi,
The problem is when i insert the xml file in the sender directory I don receive the output file.
1) while checking the CC please check whether your file is being picked-up from the sender directory.
2) Is your file format the one that you have given in the sender CC? (XYZ.xml, XYZ.txt....)
3) See if the return code of your BPM is 0.....login to SAP GUI --> go to transaction SXI_CACHE -->select Integration Process and see for your BPM....if it is not 0 then use the Repeat Activation option (available above the BPM list).
I also want to kno why do we need to use BPM?
If you are talking about the use of BPM in this aprticular blog, then please note that this scenario can be done without a BPM also....BPM is used just to show the basic functinality.....
How to decide whether your scenario requires a BPM depends on the requirements...refer this checklist for more info:
http://help.sap.com/saphelp_nw70/helpdata/EN/1c/287842f9e03654e10000000a155106/frameset.htm
Regards,
Abhishek.

Could any one provide me with the links of file to file scenario using BPM

Could any one provide me with the links of file to file scenario using BPM

Hi,
omit RFC part
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

Alerts-Idoc to File Scenario using BPM

Dear all,
At the sender side,I am sending 2 Idoc's orders03,orders04 Idocs I am Merging in to single at my mapping level and sending to the respective receivers.
When even some error occurs at system level or application level,an alert must be sent to the respective valid receipents.
My question is,when creating the Alert Rule how to use the interfaces(orders03,04) (here I have multiple senders).
Is Alert rule required in BPM scenario's?if not let me know how alerts would be triggered for bpm scenarios.
Thanks,
Srini

Hi,
Let me see if I had you requirement correct.
When the Idoc is sent from R3, sender partner type is LS and Receiver Partner Type is LI.
If yes,
1. Create a Party in ID.
2. The Agency , Scheme and Identifier will have values,
Agency --> Receiver Business System name or Business Service Name to be used for File.
Scheme --> ALE#LI
Identiier --> Value of the RCVPRN field in the idoc control Record. Basically the Receiver Partner Name.
All the Configuration In ID will use this Party as the Receiver Party and the corresponding Service asthe Receiver service.
No need for a sender party as sender partner is LS.
Regards
Bhavesh

Two Files merging using File adapter in Bpel 2.0

Hi All,
I have two different files (File 1 and 2) of same format(Two columns each) , now i want to merge these two files using their data and form a consolidated file (File 3 with four columns).
Please advise on how to make it possible using file adapter.
Example:
File 1 Format: A1 and A2 - are two columns of number and sring type
File 2 Format : B1 and B2 - are two columns of number and string type
Consolidated File 3 Format : A1 B1 A2 B2 - forming a single row if A1=B1 and also populating A2 and B2.
Thanks
Karthick.

Hi Karthick,
I would say read both files completely. Then create a transform and select both messages as an input creating one output. With XSLT it should not be too hard to combine the two inputs. You could loop on one file and then select each row from the other file. That output can be written to file.
I don't know what triggers the process, but you could either let bpel be triggered by the polling on one file and read the other synchronously. Or read both files synchronously.
Regards,
Martien

Problem: Merging same Files into 1 File using BPM, Receiver File empty.

Hi All,
I am trying a scenario where I need to merge two similar files into one single file (Append) using BPM
I am following the same structure as defined in the predifined BASIS Namespace i.e. http://sap.com/xi/XI/System/Patterns for Integration Process BpmPatternCollectPayloads. The only thing I changed is that inside my loop I am having a container dat counts till 2.
Now when m testing d interface, the file @ reciver directory is generating, but without any data i.e an empty xml is generating. PI is also not showing any error anywhere.
My Message mapping structure is as follows:
Sender Side:
<Message>    (1..1)
   <Message1> (1..1)
       <MT_myMessageType> (0..unbounded)
                <Records> (1..1)
                        <Id(Used for correlation)> (1..1)
                        <Name>   (1..1)
                        <Address> (1..1)
Receiver Side:
<Message>    (1..1)
   <Message1> (1..1)
       <MT_myMessageType> (1..1)
                <Records> (0..Unsbounded)
                        <Id(Used for correlation)> (1..1)
                        <Name>   (1..1)
                        <Address> (1..1)
Can anyone plz help me.

Inbound Message after PE, is empty, so the Request Message Mapping (Technical routing) step is also showing a Empty XML without any structure.
So you mean to say The inbound Message for BPM -
> File is empty?.....this clearly means that
1) the transformation step in BPM is not producing the required XML
2) some validation is imposed in the mapping...which if not satisfied is not creating the target structure.....
Can you ensure that the transformation step outside the block is working properly....and that your BPM design is exactly same as in BpmPatternCollectPayload (except the number of times the loop is executed)......
just few days back even i was stuck in a similar situation....the transformation step outside a Block was not producing a particular element in the target......i made some dummy changes in the mapping and then again included in the transformation step and then my BPM worked fine.......so the conclusion is either the data from block is not going into the transformation step or the transformation step is not creating the target.....
Regards,
Abhishek.
Edited by: abhishek salvi on Jun 30, 2009 12:10 PM

** How to deliver multiple files using BPM (From RFC output)

Hi Friends,
I am doing File-RFC-File scenario using BPM. I am using BAPI_SFLIGHT_GETLIST as my RFC (Standard RFC). If we execute this RFC, it will return the results in tables form. Assume that, the inputs to RFC is like below.
FromCountryKey : US
FromCity: NEW YORK
ToCountryKey: DE
ToCity: FRANKFURT.
The outputs from the RFC is like below.
26 Entries
CAR
CONN
FLDATE
AIR
AIR
DEPTIME
SEATSMAX
SEATSOCC
|
DL
0106
19.05.2008
JFK
FRA
19:35:00
280
266
UA
3516
20.05.2008
JFK
FRA
16:20:00
380
364
LH
0401
23.05.2008
JFK
FRA
18:30:00
220
209
LH
0401
28.05.2008
JFK
FRA
18:30:00
220
208
UA
3516
28.05.2008
JFK
FRA
16:20:00
380
367
DL
0106
16.06.2008
JFK
FRA
19:35:00
280
261
UA
3516
17.06.2008
JFK
FRA
16:20:00
380
357
LH
0401
20.06.2008
JFK
FRA
18:30:00
220
213
DL
0106
14.07.2008
JFK
FRA
19:35:00
280
1
UA
3516
15.07.2008
JFK
FRA
16:20:00
380
86
LH
0401
18.07.2008
JFK
FRA
18:30:00
220
123
DL
0106
11.08.2008
JFK
FRA
19:35:00
280
56
UA
3516
12.08.2008
JFK
FRA
16:20:00
380
67
LH
0401
15.08.2008
JFK
FRA
18:30:00
220
114
DL
0106
08.09.2008
JFK
FRA
19:35:00
280
0
UA
3516
09.09.2008
JFK
FRA
16:20:00
380
164
LH
0401
12.09.2008
JFK
FRA
18:30:00
220
64
DL
0106
06.10.2008
JFK
FRA
19:35:00
280
80
UA
3516
07.10.2008
JFK
FRA
16:20:00
380
8
LH
0401
10.10.2008
JFK
FRA
18:30:00
220
16
DL
0106
03.11.2008
JFK
FRA
19:35:00
280
11
UA
3516
04.11.2008
JFK
FRA
16:20:00
380
33
LH
0401
07.11.2008
JFK
FRA
18:30:00
220
53
DL
0106
01.12.2008
JFK
FRA
19:35:00
280
0
UA
3516
02.12.2008
JFK
FRA
16:20:00
380
45
LH
0401
05.12.2008
JFK
FRA
18:30:00
220
25
|
We need to create output file for each record. In this case, the system should generate 26 output files.
I imported the RFC and created the required interfaces and designed BPM also.
Start --> Receive step --> Synchronous Send --> Asynchronous Send
But, I stuck in how to deliver each record to the output file from BPM.
Any idea, friends. (like using BPM Multi-line option. or 'Receiver From' property in the Send Step)
Kindly help me friends to solve this issue.
Thanking you.
Kind Regards,
Jeg P.

Hi
You can do it by creating one another message interface having structure same as your table.
What you have to do is create a mapping in such a way that for each record in table one message(newly created) must be created.
Use that mapping in an interface mapping, remember occurence of target message should be 0..Unbounded both in message mapping and interface mapping.
Now create one single line message and one multiline message in BPM for newly created message.Use transformation step with new interface mapping, mention source(RFC response) and target message(use multiline element of new message) for the transformation step.
Use send step inside a block,set block mode to "forEach", and attach new message to that send step.
Use multiline and single element of new message in the property window of block.
Now your BPM will look like
Start ---> Receiver ---> Synchronous send ---> Transformation ---> Block ---> Async Send(within block)
I think in this way you can implement what you want.
Regards
Sami
Reward points if helpful.

File to RFC scenario using BPM : a synchronous one

Hi All
I am doing File>RFC>File scenario using BPM with help of the blog
RFC Scenario using BPM --Starter Kit
here everything is explained but i am getting error while the processing of BPM part
Input file is being picked (this part is success) but rest BPM and response i am not getting back in .
interface names
filereq_MI >Filetoabstract_MI>Sync_MI>RFCtoabstract_MI>Fileres_MI
(abstract means its an abstract interface)
i have configuered the Integration process as follows
Start>Recieve>synch_send>send>end
step : Recieve
mode : asynch
message:Filetoabstract_MI
step : synch_send
mode : synch
synch interface : synch_send
req message:Filetoabstract_MI
res message : RFCtoabstract_MI
step : send
mode : asynch
message:RFCtoabstract_MI
and i have given interface mapping during second (synch_send) step but here mapping is giving problem its showing exception error during mapping
error is there
1) Integration process ---> file
2) Integration process-->R/3 system

Hi,
Configure the Integration Engine According to this Blog and Trigger the Process again
Configuration of a Central Integration Server
Regards
Seshagiri

Interface mappin in File to File using BPM

Hey guys
why is it that in a asynchronous File to File scenario using BPM,we make interface mapping between outbound message interface and the abstract message interface whereas in general its between outbound and inbound message interface.also why we dont have any interface mapping between Abstract interface and inbound interface.
thanx
ahmad

Ashish,
From the link,
http://help.sap.com/saphelp_nw04/helpdata/en/43/d92e428819da2ce10000000a1550b0/content.htm
<i>Every step of an integration process uses Integration Server resources.
●      Every message that is sent to the Process Engine is duplicated.
●      Every message that is sent from the Process Engine is duplicated.
●      A work item is created for the process itself and for every step the process contains.
This means that for a process that just receives one message that is sent without being processed further, four messages and three work items are created.
For this reason, you must ensure that you take Integration Server resources into account when you define integration processes. </i>
So, by having the transformation outside the BPM , you are avoiding one message to be stored inside your BPM and therby the replication. The message that hits the BPM is the transformed message directly which avoid consumption of resources.
So, as much as possible keep mappings outside the BPM.
Regards,
Bhavesh

File to File output not received using BPM

Hi...
   I am doing simple File to File scenario using BPM. Everything id fine. But i am not getting output in receiver side.Could you please help me out in this issue.
Thanks
Leela

Let me tell you ID configuration for this blog...
1)Sender Agreement :
Sender service : Source Service interface : source_ob
Receiver service : BPM
create sender channel
2)Receiver agreement :
   Sender service :BPM    interface : target_abs
   Receiver service : Target service
3)Receiver determination 1:
Sender service : Source service interface : source_ob
Receiver service : BPM
4) Receiver determination 2:
    Sender service : BPM interface : target_abs
    Receiver service : Target
5)Interface determination 1:
      Sender service : Source interface : source_ob
       Receiver service : BPM
Inbound interface : target_abs
Interface mapping : specify the interface mapping name
6)Interface determination 2:
      Sender service : BPM interface : target_abs
       Receiver service : Target
Inbound interface : Target_IB
Interface mapping : N/A
Check the above config with ur configuration

About File To File using BPM

Hi,
Can any body send the file to file scenario using BPM and also some other typical scenario's on BPM with screenshots.
Thanks in advance .
Regards,
Prem.S

hi
these r some useful blogs for bpm scenarios.
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
FILE TO FILE SCENARIO USING BPM
Interface mappin in File to File using BPM
/people/udo.martens/blog/2005/09/30/one-logical-system-name-for-serveral-bpm-acknowledgements
/people/siva.maranani/blog/2005/05/22/schedule-your-bpm
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
/people/sravya.talanki2/blog/2005/08/24/do-you-like-to-understand-147correlation148-in-xi
/people/michal.krawczyk2/blog/2005/09/04/xi-do-you-realy-enjoy-clicking-and-waiting-while-tracing-bpm-steps
/people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
Regards
rajesh

Upload attachment using BPM File Chooser in OBPM 10g

Hi,
I am currently working on OBPM 10g.
Can anyone please help me with upload attachment using BPM File Chooser using BPM Presentation?????

Do not use the existing Fuego.Ui.FileChooser component. This OOTB Oracle BPM component would work fine if you're trying to get a file from the server where the Engine is running, but will not work if you want a file from the end user client's machine.
Take a look at a project I uploaded to http://www.4shared.com/file/aq-cY2qN/_2__FileChooserDemo.html
It has both a JSP and a BPM Object presentation. The BPM Object presentation has a button called "Attach File", If you click in the presentation editor and then click the Properties tab you'll see that its "Name" property is "AttachFile" and the Action property is set to "submit". This means that it will return the text "AttachFile" in the result predefined variable in the screenflow. If you open the screenflow, you'll see the conditional transition from the "AttachmentViewerInteractive" to the "FileChooser" task. The name of this transition is "AttachFile". Because this was named "AttachFile", the logic behind this transition evaluates if "result ==AttachFile".
Be careful with this example project. It will succeed when a small text or binary file < 100k is selected. It will go to the "File is too big" task in the screenflow shown below when the file > 100k. To make this maximum size limit larger, simply add a new line in your
<Oracle BPM Enterprise Home Directory>\webapps\workspace\WEB-INF\workspace.properties file:
# Max size of a file coming from a client machine (default is 100k)
fuego.workspace.servlet.Attachment.MAX_ATTACHMENT_SIZE=2000000
Once the file has been retrieved, do not store this as an instance variable unless it has been marked as a “Separated” instance variable.
The “AttachView1.jsp” is invoked from the Interactive activity’s “FileChooser” task in the screenflow.
Once the end user selects the file from the JSP, work flows to the “Add file” task. This is where you can retrieve the selected file’s:
- Name: fileHolder.file_filename variable
- Content type: fileHolder.file_content_type variable
- Contents: fileHolder.file binary variable
Dan

Soap to File Scenario with BPM

Hi Guys
I have create my Soap to File Scenario using BPM to split the file on "Transformation step" into 7 files and it must save these files to my FTP Server, when testing on sxmb_moni I don't get any errors but when checking on the FTP server no files are created, and I understand that it should be showing all seven processing on the sxmb_moni, but that is not happening.
I have used the ForEach mode on my Block.
What could I be doing wrong.
Thanks!!
Yonela

go to runtime work bench to see communication channel, especailly the receiver channel.
To see what happened on it

Problem in merging two files using BPM

Hello Frens,
I am doing a scenario for merging of two files N:1 using BPMu2026
I have to merge two files into one file. The two input files are as below :
File1 : Id, Name, Age, Place
File2 : ID, Street, Adrress
And output File is : ID, Name, Age,place, street, Address
For this scenario I have defined three datatypes , message types and the message interfaces as below :
For File1: Mi_file1_ob, Mi_file1_abs
For File2: Mi_file2_ob, Mi_file2_abs
For output : mi_output_ib, mi_ouput_abs
In interface mapping I have selected two source interface and one targetu2026
For Integration process I have selected two receives as two branches of fork and transformation to collect them and a send..
In IR part I have defined three communication channels sender1, sender2 and a receiver . I have imported the integration from IP and rest is sameu2026
I am facing a problem for getting the outputu2026
When I checked in sxmb_moni everything is fine and sxi_cache and the return code is also 0 but I am not getting the outputu2026
Can anyone help me in finding out the problem..
Thanks in advance...

Hi,
Have a look into these blogs and links
/people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
http://help.sap.com/saphelp_nw04/helpdata/en/de/766840bf0cbf49e10000000a1550b0/content.htm
you can design the ccBPM. To know more about Correlation -with e.g
http://help.sap.com/saphelp_nw2004s/helpdata/en/0e/56373f7853494fe10000000a114084/content.htm
/people/sravya.talanki2/blog/2005/08/24/do-you-like-to-understand-147correlation148-in-xi
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm
/people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi
Re: Correlation
http://help.sap.com/saphelp_nw04/helpdata/en/a5/64373f7853494fe10000000a114084/content.htm
i hope this will help you.
Regards
Aashish Sinha
PS : reward points if helpful

File merge using BPM

Similar Messages

Maybe you are looking for