Soap to File Scenario with BPM

Hi Guys
I have create my Soap to File Scenario using BPM to split the file on "Transformation step" into 7 files and it must save these files to my FTP Server, when testing on sxmb_moni I don't get any errors but when checking on the FTP server no files are created, and I understand that it should be showing all seven processing on the sxmb_moni, but that is not happening.
I have used the ForEach mode on my Block.
What could I be doing wrong.
Thanks!!
Yonela

go to runtime work bench to see communication channel, especailly the receiver channel.
To see what happened on it

Similar Messages

File to Web service (SOAP) to File scenario with out BPM in PI 7.1

Hi All,
I have scenario File to Web service (SOAP) to File scenario with out BPM.i am getting the below error:
1) Error MP: unexpected exception caught com.sap.aii.af.service.cpa.impl.exception.CPAObjectKeyException: Value of key must not be null: ObjectId
2) Error ROB: error during processing: com.sap.aii.af.lib.mp.processor.ModuleProcessorException: Processing Error
PI server is 7.1 with SP:8
I have configured the scenario like this
1) 2 File channels - Sender & Receiver ,1 RFC channel - Receiver. We need to note that, the additional Module parameters need to be added only for sender File channel
2) Created Sender Agreement
3)Created Receiver Determination
4)Created Interface Determination
5)Created Receiver Agreement
Regards,
Ramesh

Hi,
Thanks for your reply!!
My Scenario is File to SOAP to File.
Configred modules in Sender channal below:
Prcessing sequence:
Number       Module Name                                        Module Key
1..........       AF_Modules/RequestResponseBean.......1
2..........       CallSapAdapter..........................................2
3..........       AF_Modules/ResponseOnewayBean.......3
Module Configuration:
Module Key                                       Parameter Name                                       ParameterValue
1                                                        passThrough                                            true
3                                                        receiverChannel                                       receiverChannel name
3                                                        receiverService                                        receiverService name
please tell any more confiration requered.
Regards,
Ramesh

Issue in File to RFC to File Scenario with BPM using Block Step

Hi Everybody,
                       I am doing File to RFC to File Scenario for multiple records using BPM using Block Step. The File Message is getting posted and after that, the message is getting stuck up in the qRFC Monitor (Inbound Queue).
                    After seeing the message in Inbound Queue, I am trying to execute and release the message. But when i execute the LUW, it says " Function module doesnt exist or EXCEPTION raised" in Inbound queue.
Could somebody suggest me the outcome of this? What does this mean and how to
release the stuck up message in Queue.
Thanks and Regards,
N.Jayanth Kumar

Hi Rajesh,
                       After going through the blog, i saw the trace messages. It says
" The   exception occurred (program: CL_SWF_XI_INBOUND=============CP, include CL_SWF_XI_INBOUND=============CM00F, line: 19)"
Regards,
N.Jayanth Kumar

File-Soap-File scenario with asynch - synch bridge

Hi,
I am new to PI and I'm trying to develop a FIle-SOAP-File scenario with asynch-synch bridge. These are the components in my integration builder:
Business Component to act as both the sender and receiver
1 outbound communication channel to pick up the file from ftp server
1 SOAP communication channel
1 inbound communication channel to write file to the ftp server
receiver determination
interface determination
sender agreement
receiver agreement
In my outbound channel, I am using:
Processing sequence:
1     AF_Modules/RequestResponseBean                Local Enterprise Bean     1
2     CallSapAdapter                                                         Local Enterprise Bean     2
3     AF_Modules/ResponseOnewayBean                Local Enterprise Bean     3
Module configuration:
1     passThrough                         true
3     receiverChannel                        inbound communication channel to write file to the ftp server
3     receiverService                         Business component where the channel above is found.
When I run the scenario, I am able to get the file from ftp server, map it to SOAP format according to the wsdl, forward the message to SOAP adapter, send it to web service, get the response back from web service, map the data to a regular file format. However, it fails to write back to the ftp server. I am getting Java null pointer error at AF_Modules/ResponseOnewayBean.
2010-07-28 15:48:01     Information     SOAP: completed the processing
2010-07-28 15:48:01     Information     SOAP: continuing to response message 2ce3ec60-9a9a-11df-b109-00145ec5c1ae
2010-07-28 15:48:01     Information     The message was successfully delivered to the application using connection SOAP_http://sap.com/xi/XI/System.
2010-07-28 15:48:01     Information     The message status was set to DLVD.
2010-07-28 15:48:02     Information     The message was successfully transmitted to endpoint http://vs06cs01.sce.com:8000/sap/xi/engine?type=entry using connection File_http://sap.com/xi/XI/System.
2010-07-28 15:48:02     Information     The message status was set to DLVD.
2010-07-28 15:48:02     Information     The application sent the message synchronously using connection File_http://sap.com/xi/XI/System. Returning to application.
2010-07-28 15:48:02     Information     MP: processing local module localejbs/AF_Modules/ResponseOnewayBean
2010-07-28 15:48:02     Error     MP: exception caught with cause java.lang.NullPointerException:
2010-07-28 15:48:02     Error     File processing failed with java.lang.NullPointerException:
Had anyone encountered this error? Any suggestions is greatly appreciated.
Thanks.

Thanks for the replies. I checked my module parameters and I realized that i entered the wrond business service. I fixed that and ensure that all 3 channels are running.
I ran the scenario again and it does not give me Java Null pointer exception. However, it gives me a different errror.
2010-07-29 08:52:31     Information     The message status was set to DLVD.
2010-07-29 08:52:31     Information     MP: processing local module localejbs/AF_Modules/ResponseOnewayBean
2010-07-29 08:52:31     Error     MP: exception caught with cause com.sap.aii.af.service.cpa.impl.exception.CPAObjectKeyException: Value of key must not be null: ObjectId
2010-07-29 08:52:31     Error     File processing failed with com.sap.aii.af.service.cpa.impl.exception.CPAObjectKeyException: Value of key must not be null: ObjectId
I am trying to check all my settings again. Any pointers regarding the errors above?
Thank you.

Business systems for Soap to file scenario

Hi Experts,
I am working on a soap to file scenario.Which type of business systems shall i create i.e Third party,As ABAP,As Java etc.Please suggest.
Thanks
Veeru

Hi,
Normally Business systems are created in SLD when you are provided with relevant system details. A business service is used in case of the system being an abstract unit.
In your case, it is better to go for Business service because you generally don't have such details for third party system.
Just go through this link for more understanding...
Difference between Business System and Business Service
Regards,
Chandra

Testing of SOAP to FILE Scenario

Hi all
I have done with SOAP to FILE scenario.
--> while defining web service what we need to give in the URL????
--> How to test this SOAP to FILE scenario to see wheather it is working fine or not, what are the all options
Thanks
Dheeraj

Hi Dheeraj,
Definitely you can test it through the microsoft infopath tool.
steps to follow:
Executing wsdl File Using Microsoft Info Path
1.>Click on the design a from template
2.>Select the Web service icon and click ok
3.>Select the radio button u2018receive and submit datau2019 and click on next.
4.>Enter the path of the generated wsdl which u have saved and click next.
5.>Select the interface and click next
6.>Select the interface and click next.
7.>Double click on parameters.
8.>Double click on the parameter (which you want to send as request). Then click on the query field and click ok.
9.>Click next. And click Finish
10.>Now drag the query fields on the data fields to the left side. And click preview.
Please follow these steps I hope you will be able to test it.
Thanks and regards,
Nutan

IDoc-to-File scenario with external Partner ... PCK necessary?

Hi all,
I have a question concerning to a IDoc-to-File Scenario with an external Partner. Here is a short Description of the Scenario:
The SAP ERP System creates an IDoc which should be send to the SAP Integration Server. The Integration Server respectively the IDoc-Adapter transform the IDoc in IDoc-XML. The Integration Server executes a Mapping and so on. In the final step the Integration Server should send the XML-File to a FTP Server in New York (external Partner) with the File/FTP-Adapter.
Have I to install the Partner Connectivity Kit at a Server in New York or is it working without the PCK? Which are my possibilities?
Thanks for your help
with kind regards
Christopher

Hello,
If the FTP server has connectivity to XI and if the
port is open XI can directly do the FTP using File
Adapter.
Thanks,
Himadri
Hi,
thanks for your quick answer.
What means "connectivity to XI"? Our SAP-Environment is in Germany and the FTP-Server is in New York. Is it enough to open the port in the firewall?
Thanks for your answer
Christopher Kühn

Error in SOAP to file scenario

Hey guys
i m doing a SOAP to File scenario and getting the following error.
<SAP:Stack>"COMMUNICATION FAILURE" during JCo call. Error opening an RFC connection.</SAP:Stack>
any idea where should i look ?
thanx
ahmad

Hey
i m still getting a red flag in MONI,the error is
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="MAPPING">JCO_COMMUNICATION_FAILURE</SAP:Code>
<SAP:P1>Error opening an RFC connection.</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>"COMMUNICATION FAILURE" during JCo call. Error opening an RFC connection.</SAP:Stack>
<SAP:Retry>A</SAP:Retry>
</SAP:Error>
i checked my mapping by copyin payload from MONI,its working fine.
thanx
ahmad

IDOC to XML file scenario with party

Hi All,
I am developing a IDOC to XML file scenario with party in which I have extended the MATMAS idoc and configured the receiver FILE communication channel.
But its giving me the error *"No receiver could be determined"* with party. If I run the same scenario without the sender party its working fine.
And sender is my R/3 system under party P_Party and receiver is my third party system under P_Party.
Thanks in advance.
Gaurang

U can give a try as follows.
In the Partner Profile of Sender R/3 system,
Give the Receiver Party P_Party in the PartnerNo. Give the 'Business Partner' as logical System type.
In XI, Party Definition of P_Party
Give the following Alternative Identifier
Agency -   Sender R/3 Business System
Scheme -   ALE#GP
Value    -    P_Party

JCO problem in SOAP to file scenario

Hey guys
i m doin a SOAP to file scenario and getting a JCO error in moni,the status of my queue in SMQ2 is SYSFAIL,when i check the TCP/IP connection in SM59 i find error in two places
AI_DIRECTORY_JCOSERVER and AI_RUNTIME_JCOSERVER .when i test connection for both of them i get the followin error "Error opening and RFC connection".
is this error dues to some server problem of something wrong in my scenario.?
the SOAP adapter in RWB is green.
i tried to unlock and delete the queue in SMQ2 but when i execute my scenario again,it gets SYSFAIL error.
thanx
ahmad

Hi,
If you restart the J2ee engine, it will work.
But The error may because of many reasons
-Might be because of lots of messages are to be processed simultaneously.
-Increasing the number of processes in VisualAdmin (VisualAdmin>JCO RFC Provider>AI_RUNTIME_<SID>) and see if that helps.
-This SAP Note may help u -709140.
Hope this helps,
Regards,
Moorthy

Doubt Regarding SOAP to File Scenario

Hi All,
I am trying to create a SOAP to File scenario .These are the following things I have done so far :
IR - 2 datatypes ( 1 for soap message and 1 for file message )
       2 message types for the corresponding messages
      2 Message interfaces, both are asynchronous
      1 message mapping
      1 interface mapping
ID- 2 business systems (1 to send soap, 1 to recieve file )
    2 communiccation channel (soap sender, file receiver )
soap sender adapter parameters - Interface Name - Message interface for soap message
                                                  interface namespace - scenario namespace
Then, i generated a wsdl file to expose the outbound message interface for soap message as a web service, url for message interface : http://host:port.XISOAPAdapter/MessageServlet?:service:channel.
After generating the wsdl file, i imported it in external definition
Could anyone plz. tell me, is this the right approach to creat this scenario ? how can I test this scenario?using altova spy ?

Hi,
The URL you have mentioned to genarate WSDL is not a valid one
http://host:port.XISOAPAdapter/MessageServlet?:service:channel.
Check the below valid URL
http://host:port/XISOAPAdapter/MessageServlet?channel=:service:channel.
You no need to import this to the Eexternal Definition as you already have DT,MT and MI, Any way this dosn't make any difference.
You can use SOAPGUI Tool to test:
->Create New Project -> provide WSDL you have genarated.
->Select Request and provide username and password and click the green button on top(Submit request to end URL).
Using altova spy:
Select SOAP Menu->Create New SOAP Request and provide your WSDL file and
SOAPMenu->Send Request To Server
Then you will get response..
Regards,
Prasanna

Problem in simple filetofile scenario with BPM

Hi
I am a starter to XI. I am implementing simple file2file scenario with BPMs.
But I am getting error while looking into SXMB_MONI.
Under "Monitor for Processed XML messages"
Number of XML message Found 3 (which is my input 3 xmls which is fine) but
"Status is RED Flag".
"Error Category: BPE_ADAPTER"
"Error ID: UNKNOWN_MESSAGE".
Please help me out with this problem.
Regards
Sam

Hi Raj,
When i click PE getting following error:
"Unable to perform action for selected message".
When i double click the row, it takes me to xml message versions where i can RED FLAG for "Call Adapter". In the trace i foudn the below at the end:
<trace level =1 type=system error> error exception return from pipeline processing"</trace>
Hope this helps to guide me mroe
sam

IDOC to FILE scenario With Screen shots

CAN YOU PLEASE SEND US THE DETAILS OF IDOC to FILE scenario With Screen shots and do the needful for me

Hi Surya,
I thought i will just share a few basic thoughts that you need to take care while doing an IDOC to File Scenario. Just see if it helps you in anyways.
While doing an IDOC -> XI -> File scenario, The Points to noted are:
1. You dont need a DT, MT or a message interface for the IDOC as it itself acts as the Message Interface.
2. You import the IDOC and use the same in your mapping.
3. In this configuration note that you dont have a sender agreement as you dont have a sender IDOC adapter.
If it is that you wanted to send an IDOC from XI (File to IDOC) , then in this case:
points 1 and 2 will remain, but the 3 will not. You will need a sender agreement for the file and a receiver agreement for the IDOC.
IDOC -> File scenario ref:
<a href="/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters scenario</a>
File -> IDOC ref:
<a href="/people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping to IDOC</a>
To be able to trigger your IDOC from the SAP ISU system, you will have to set the partner profile in we20. Select your Business System (mostly under Logical system) and then create Outbound entries for whichever IDOC you want to trigger.
You define your basic type also in your partner profile settings, Please go thru the following links to get a better idea about partner profile:
http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b833243d711d1893e0000e8323c4f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b7cd343d711d1893e0000e8323c4f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/32/692037b1f10709e10000009b38f839/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/5e/b8f8bf356dc84096e4fedc2cd71426/frameset.htm
Also, I would suggest that you go through this blog by michal if any issue arises,
/people/michal.krawczyk2/blog/2005/03/29/xi-error--unable-to-convert-the-sender-service-to-an-ale-logical-system
/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
Also have a look at these forum threads...
IDOC TO FILE SCENARIO
idoc to file scenario
I hope this helps.
Regards,
Abhy Thomas

File to File Scenario with Secure Connection. Pls help urgent

Hello All,
I tried a lot to get a link/blog that expalin full scenario
for File to File Scenario with Secure Connection
Kindly let me know if somebody have link/doc for it
that describe all the steps to do configuring this scenario.
What is difference in simple words between
FTPS and SFTP.
Pls help it is urgent as I require for Project work urgently.
Regards

hi rich
go through these links
FTPs connection failed - error ".. certificate rejected by ChainVerifier"
Re: What is SFTP, FTI channels
http://help.sap.com/saphelp_erp2005/helpdata/en/e3/94007075cae04f930cc4c034e411e1/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/frameset.htm
FTPS implementation question.
http://help.sap.com/saphelp_nw04s/helpdata/en/43/0e16bfd7b021aee10000000a1553f6/frameset.htm
Server certificate rejected by ChainVerifier:FTPS server(Points Guaranteed)
/people/krishna.moorthyp/blog/2007/07/31/sftp-vs-ftps-in-sap-pi
File adapter
thanks
Kunaal

XML file to Proxy Scenario with BPM - ID Steps

Hi Guys,
Any one can help me to find about the scenario XML file to ABAP Proxy with BPM, ID steps please. Any link or logical routing, receiver determination and interface determination idea. Please correct me,
I have created Business Service as sender to send one xml file to BPM, BPM is sending a message to SNC system. I have created 2 receiver determinations, but I am confusing in interface determination, where to declare OM?
Please can any one respond bit quicker.
Thanks in advance
Regards
San

ES Repository
                     *Service Interfaces*
Create one outbound service interface for XML file.
Create one Inbound synchronous Interface for SNC system.
Create one Abstract Asynchronous interface ,same message type as you used for outbound service interface .This is for Integration process receive step.
Create one Abstract async interface for receiving the response from SNC system in Integration process.
Create one Abstract synchronous interface to be used in the Integration process for Send sync step.
Create on inbound asyn service interface for sending the response from integration process (received from SNC system) to the Receiver System.
              Operation Mapping.
Create an Operation Mapping using Abstract sync interface and inbound syn interfaces.
              Integration Process
start--->receive Step---->send Synchronous step----->send step.
Create two container elements
first with abstrat async interface for the XML request.
second for abstract asyn interface with the XML response structure (asyn receiver system structure)
In the send sync step select your abstract syn interface from the F4 help.and select the corresponding request and response message from the container element you defined earlier.
Integration Directory.
Create one sender File adapter Communication channel for XML file reading.
Create two receiver communication channel for sync system(receiver XI adapte for ABAP PROXY) and other for asyn receiver system .
Create 3 receiver determination
1.from sender to Integration process.
2.from Integration process to SNC system.
3. from Integration process to Asyn Receiver System.
Create 3 Interface determination.
Specify Operation mapping while you are creating interface determination from Integration Process to Syn BS.
Create one sender agreement
Create two Receiver agreement.
Regards
Kubra Fatima.

Soap to File Scenario with BPM

Similar Messages

Maybe you are looking for