File Name in the Send Port with PGP Encryption

Hello,
The File Name in the Send Port should be set with the mask like ABC.txt.pgp. Since I have used the PGP Encryption Component it is generating the File name like ABC.pgp.txt.pgp. But what I need is just the ABC.txt.pgp. How can be this be done. Any help is
greatly appreciated.
Thanks

What you are seeing is the expected behavior. If you are referring to this:
https://code.msdn.microsoft.com/windowsdesktop/BizTalk-Sample-PGP-ebcbc8b2
or one of it's derivatives, it will internally modify FILE.ReceivedFileName to append .pgp if that property is set.
So, if you use just %SourceFileName%, you will likely get the desired result. Otherwise, you will have to explicitly set FILE.ReceivedFileName to ABC.txt somewhere before the PGP component.
You can also modify the source code to remove this behavior.

Similar Messages

Adding file name in the sender Adaptor

Hi ,
I am facing some problem in adding file name .
The scenario is like this :
The file needs to be send from on system and needs to be Archived . Once processed, the archived file should be prefixed with ARCH_ so that it is not picked up again .And the other thing given is the file name used will be of the format XXX_YYY_nnnnnnnnnn.DAT where nnnnnnnnnn is the date stamp .
Please help it's urgent ......
Thanks and regards
Anita

Hi,
if you can have XML achvived files you can use
standard
processing mode: Archive
with one swich you can set the timestamp mode
yyyMMdd-hhMMss-SSS_.
ref
http://help.sap.com/saphelp_nw04/helpdata/en/e3/94007075cae04f930cc4c034e411e1/content.htm
Regards,
michal

Variable Substitution in file name on the sender CC in PI 7.1

Hi
I am working on a File to File scenario, where I need to shorten the file name to something like mode1, mode2 or mod3,
How can i achive this, Please let me know if there is any example
Thanks
PR
Edited by: PR on Oct 29, 2009 1:08 PM
Edited by: PR on Oct 29, 2009 1:09 PM

Hi,
Mode1, mode2 and mode3 are file names?
You can achieve this by using 'Advanced Selection for Source File' in Communication channel in ID.
Refer the advanced selection of Source file concept from following link:
http://help.sap.com/saphelp_nw70/helpdata/en/e3/94007075cae04f930cc4c034e411e1/content.htm
-Supriya.

How to find the File name using the FTP Adapter

hi all,
how to find the File name using the FTP Adapter with BPEL.
Regards

Found the solution for this.
First In the mediator's routing rule use assign property $in.property.jca.file.FileName to $out.property.jca.file.FileName
In the BPEL's receive activity go to the properties tab and get the property to a BPEL variable. That should do it.
Thanks for the posts

No Name of the Sender in whatssap notifications in iPhone

Whenever i receive whatssap message notifications on my ios home screen , it doesnt display the name of the sender.
Instead of that , the names which each of the contacts have included in their "whatssap profile" section, is being displayed along with their message.
& for contacts who have not included their name in the profile sections, whenever they send me a message, my notifications shows " Whatssap" as the name of the sender along with their message
When i click on whatssap application , the names of all contacts in the chat section is as per my contacts list only. I dont see these names during the notifications.
For eg
Suppose I have a contact name as Michael in my iphone. ( Michael may have put his name in profile section of whatssap as Mike ).
So,, whenever Michael sends me whatssap message , i should receive notification as "Michael -- & the message he sent".
But I receive notification as " Mike -- & the message he sent"

Since your using a 3rd party app ask whatsapp.

Send port with same file name as receive

I have a filename "abc.docx". I need to create a send port where I should set the file name in a such a way that I should have the same file name as received.
I have set the filename in the send port as "%SourceFileName%" but it does not seem to be working.
How to set the send port to have the same file name as received by the receive port? Send location should hold the same file name

could you please also mention what is happening when you set
%SourceFileName% . what kind of output filename are you getting then when used %SourceFileName%
? incase if you are not getting any file at all in the output, then its not the issue with %SourceFileName%
macro.
Please mark the post as answer if this answers your question. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

RQ: Receive files in folder with name of the sende...

Hello,
I don't know is I'm on the right place and I don't know is there same request, so I apologize if it exist...
Please, make option the received files to be saved in folder with the name of the sender. For example: my friend with skype name XYZ send me a file 'foo.bar' that will be saved in \My Documents\Skype_save (I changed the default dir); another friend with name XXY send me file 'foo1.bar' and again it will be in \My Documents\Skype_save, but when there are many files it is difficult to sort them and know whose files sended by who... So the good choise is if the files are saved in folder with name XYZ, XXY etc... Example:
\Skype_save\XYZ\foo.bar
\Skype_save\XXY\foo1.bar
I'm sorry for my bad english, it's not my native language. I hope you can understand what I mean with this folders

There is no automatic option in Skype that can do what you are trying to accomplish. However, you can in advance create save folders named as your contacts and and each time you receive a file, to save the file in the appropriate folder.
For this to function, you have to set the option in Tools -> Options -> IM settings -> Show advanced options to “Choose a folder where to save the file every time”.

Dynamic file name of the attachment in sender mail adapter

Hi
I have configured a sender mail adapter which receives some attachments.
Right now the file name of the attachment is hardcoded to "MailAttachment-1" "MailAttachment-2" using the content-description from "AF_Modules/PayloadSwapBean" module.
I want to set it to dynamic ie. instead of "MailAttachment-1"... i want it with real name of the attach.
please suggest a solution w/o the need to develop a custom adapter module.
Thanks!
Regards,
Mariano.

Thanks Prateek,
Now, i can see that the name of the original file is into the content type named as text/xml; name"name of the file.xml" when i send the email from outlook.
If i send it from hotmail, this is not happend.
Do you know why happend this?
If i always would have the original name inside the content type, my problem will be solved.
Edited by: Mariano Vidal on Feb 13, 2009 2:26 PM

Bug:Downloading pdf file from the web,file name in dialog box populates with incorrect file name

Hi Gurus
When downloading any pdf file from the web using adobe Reader X the file name dialog box populates with incorrect file name
compared to the saved file name of the document downloaded.
Clarity
1. Download any pdf file from the web
2. Click File, Save as note the populated File Name
3. Compare the populated file name with the saved file name of the documant yuo are downloading.
4. The file Name is incorrect...
Is there any work around on this issue?Can someone please help?..
OS:Windows7
Reader: Adobe Reader X
I've tried a couple of other versions and still get the same results...

Are you downloading the file (right-click, save link as), or just opening it by clicking it?
If the latter, then what happens is the file is loaded to the temporary internet files folder by IE and assigned a temporary name, which is then used when you're trying to save it.
You can test this out by going to File - Document Properties before trying to save and looking at the file's location.

Saving a file pdf file and the file name appears on a PC with + signs in the name of the file - How do I eliminate the file name coming up with the + signs?

A pdf file is created from a word document and then posted to our dealer portal. It allows the dealer to open the pdf file and then either print and/or save off to a hard drive. The issue is the file name has + signs in between all the words. Is there a way to eliminate the file names coming up with the plus signs? It is not being saved that way. Any help you can provide would be appreciated.

Use a proper file name for the WORD document. MS decided several years ago to allow spaces, but that is not standard and is likely what the issue is. A good alternative is to replace spaces in file names with underbars, "_".

Retrieving the file name in the adapter module in the sender file adapter

hi,
i need to retrieve the file name, in the adapter module. This module is placed in the sender file channel.
After the file adapter has picked up the file from the file directory, the file is placed in the archived directory.Custom adapter mofule is place in the file shanel. i need to retrieve the file name of the file in the adapter module. Is it possible to retrieve the file name?
Also is it possible to retrieve the archive directory path in module?
Regards,
Meenkashi

Hi Meenakshi,
I guess you are looking for this
/people/daniel.graversen/blog/2006/10/05/dynamic-configuration-in-adapter-modules
Regards
Suraj

How to not append '.PART' to the file name of the currently downloading file, and just download the file with its normal filename

In Windows, when Firefox (I'm currently using 7.0) downloads a file, it appends ''.PART'' to the file name of the currently downloading file and just renames it to its original file name after it finishes downloading.
I sometimes like to watch a currently downloading video file, so it will be better if Firefox just downloads the file to its actual filename (like what Opera does), so I can easily double click the incompletely downloaded file and watch it with the video player assigned to that file extension, rather than the awkward ''Right click -> Open With -> Choose Default Program'' route with .part files.
Does anyone know how to set Firefox to do this?

It is possible that your anti-virus software is corrupting the downloaded files or otherwise interfering with downloading files by Firefox and prevents Firefox from renaming the .part file.
Try to disable the real-time (live) scanning of files in your anti-virus software temporarily to see if that makes downloading work.
See "Disable virus scanning in Firefox preferences - Windows"
* http://kb.mozillazine.org/Unable_to_save_or_download_files

Notify a user after the message is been delivered to the FTP location by the send port

I have a scenario where I need to send an alert to the user after the file is been delivered to the FTP location.
If for any reason if the send port fails and the file is not delivered then the alert should not be sent. If the first attempt fails there will be a retry and the alert should not be sent on every retry. Only after successful delivery of message.
I have a limitation, Just need to implement using the send ports, No Orchestration or no custom artifacts.
Please advice.
Thanks in Advance.
Thanks Mallesh Bonla BizTalk Architect

Hi Mallesh,
If you don't want to use any custom artifacts like custom pipeline, then you can consider this option.
Create FTP Receive port/Location (Yes Its Receive) and let it poll for any new files to the FTP location where your send port with FTP has configured for.
In the FTP adapter property (of the above Receive location) set "Delete After Download" -No, "Enable
Timestamp Comparison"-Yes.
Create a send port with file for the above Receive port name. Configure this send port to send email/alert.
This configuration would send an email immediately when the FTP folder receives a file. i.e. As per your requirement, whenever file has been delivered
to the FTP folder/server, the above new receive location would trigger for the newly received file. Since you have enabled "Delete After Download" -No, file would not be deleted from the FTP folder and since you have "Enable Timestamp Comparison"
to Yes, adapter would not retrigger another transfer. In this case the new Receive location would only act as receiving trigger message whenever FTP folder receive a file.
This is the only way you can achieve your requirement without any custom artifacts just with the standard out-of-box components.
Otherwise use
la Cour option of promoting AckRequired to the context to enable delivery notification in messaging only way. If you use Orchestration, you know you can do this
with Delivery notification feature.
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

How do I share files uploaded into the Creative Cloud with other creative cloud members?

How do I share files uploaded into the Creative Cloud with other creative cloud members?

Should be easy. Try this...
In Thumbnails view, click the little triangle (pointing downward) in the lower-right corner of the asset you want to share.
In the blue icon bar that appears, click the Share icon (the third icon from the left, just right of the trash icon). The Share dialog should pop up.
In the Share dialog, enter the email address of the person with whom you want to share the asset, then click the Send Email button - they'll receive an email with a link to your asset. OR
You can also copy a link to the asset and then paste that into your own email client if you prefer. To do that, click the Link icon (looks like a "chain", and is to the right of the email "envelope" icon) - then click the Copy Link button.
Note that the Share options won't be available if your asset is set to "Private" - you can control whether an asset can be viewed (or downloaded) by others by clicking the Public/Private control (green or red "lock" icon).
You can also access the same Share controls if you click on the file to see it one-up (you can do this from either Thumbnails view or List view); click the Share icon near the upper right corner of the browser window (to the right of the asset name).
Hope that helps.

Dynamic File Name - Suppress the Substitue varible

Hi All,
I am doing the scenarios like File name at the recevier end would be dynamic for that i take an extra field NAME mapped with UDF which return the file name dynamically. It is working fine and doing good. But the problem here is , this field is the first field in my target structure so i am getting an empty line in the target file.
So My structure as follows:
MT_BNK01 1..1
NAME 1..1
RECORD 0..Unbound
 --Record_data 0..Unbound
So in the recever side i written as follows
Recordset Structure:: RECORD
RECORD.fieldSeparator = 'nl'
RECORD.endSeparator = 'nl'
But according to this weblog i can suppress the empty line but it is not working
/people/sravya.talanki2/blog/2005/08/11/solution-to-the-problem-encountered-using-variable-substitution-with-xi-sp12
means, NAME is also in the same level of RECORD in the Structure. So How can i pass the structure as ??
I tried to pass the RecordSet Structure: NAME,RECORD
and following parameters, it is not working
NAME.fieldFixedLength =0
NAME.fieldLengthTooShortHandling = Cut
Can you please suggest me what could be the reason. Tell me what information i need to pass the RecordSet Structure and attrubute information also.
One more thing like, My sender side it is not picking the empty lines. What could be the reason. I given fieldSeparator and endSeparator as 'nl'. So to catch the empty line what i need to do???
Thanks in Advance,
Best Regards,
Vijay

Hi Vijaya,
This can be solved. Actually i had the same scenario where i was getting blank line for the header. Suppose Header was carrying the file name after i cut the value i would get a blank line in file.
So i added in content conversion parameter the following line
Header.endSeparator - '0'
then the first line was not blank.
Try this, i think your issue will be solved
Regards,
Ramesh P
Message was edited by:
 Ramesh Parashivamurthy

File Name in the Send Port with PGP Encryption

Similar Messages

Maybe you are looking for