Adding file name in the sender Adaptor

Hi ,
I am facing some problem in adding file name .
The scenario is like this :
The file needs to be send from on system and needs to be Archived . Once processed, the archived file should be prefixed with ARCH_ so that it is not picked up again .And the other thing given is the file name used will be of the format XXX_YYY_nnnnnnnnnn.DAT where nnnnnnnnnn is the date stamp .
Please help it's urgent ......
Thanks and regards
Anita

Hi,
if you can have XML achvived files you can use
standard
processing mode: Archive
with one swich you can set the timestamp mode
yyyMMdd-hhMMss-SSS_.
ref
http://help.sap.com/saphelp_nw04/helpdata/en/e3/94007075cae04f930cc4c034e411e1/content.htm
Regards,
michal

Similar Messages

File Name in the Send Port with PGP Encryption

Hello,
The File Name in the Send Port should be set with the mask like ABC.txt.pgp. Since I have used the PGP Encryption Component it is generating the File name like ABC.pgp.txt.pgp. But what I need is just the ABC.txt.pgp. How can be this be done. Any help is
greatly appreciated.
Thanks

What you are seeing is the expected behavior. If you are referring to this:
https://code.msdn.microsoft.com/windowsdesktop/BizTalk-Sample-PGP-ebcbc8b2
or one of it's derivatives, it will internally modify FILE.ReceivedFileName to append .pgp if that property is set.
So, if you use just %SourceFileName%, you will likely get the desired result. Otherwise, you will have to explicitly set FILE.ReceivedFileName to ABC.txt somewhere before the PGP component.
You can also modify the source code to remove this behavior.

Variable Substitution in file name on the sender CC in PI 7.1

Hi
I am working on a File to File scenario, where I need to shorten the file name to something like mode1, mode2 or mod3,
How can i achive this, Please let me know if there is any example
Thanks
PR
Edited by: PR on Oct 29, 2009 1:08 PM
Edited by: PR on Oct 29, 2009 1:09 PM

Hi,
Mode1, mode2 and mode3 are file names?
You can achieve this by using 'Advanced Selection for Source File' in Communication channel in ID.
Refer the advanced selection of Source file concept from following link:
http://help.sap.com/saphelp_nw70/helpdata/en/e3/94007075cae04f930cc4c034e411e1/content.htm
-Supriya.

Dynamic file name of the attachment in sender mail adapter

Hi
I have configured a sender mail adapter which receives some attachments.
Right now the file name of the attachment is hardcoded to "MailAttachment-1" "MailAttachment-2" using the content-description from "AF_Modules/PayloadSwapBean" module.
I want to set it to dynamic ie. instead of "MailAttachment-1"... i want it with real name of the attach.
please suggest a solution w/o the need to develop a custom adapter module.
Thanks!
Regards,
Mariano.

Thanks Prateek,
Now, i can see that the name of the original file is into the content type named as text/xml; name"name of the file.xml" when i send the email from outlook.
If i send it from hotmail, this is not happend.
Do you know why happend this?
If i always would have the original name inside the content type, my problem will be solved.
Edited by: Mariano Vidal on Feb 13, 2009 2:26 PM

Retrieving the file name in the adapter module in the sender file adapter

hi,
i need to retrieve the file name, in the adapter module. This module is placed in the sender file channel.
After the file adapter has picked up the file from the file directory, the file is placed in the archived directory.Custom adapter mofule is place in the file shanel. i need to retrieve the file name of the file in the adapter module. Is it possible to retrieve the file name?
Also is it possible to retrieve the archive directory path in module?
Regards,
Meenkashi

Hi Meenakshi,
I guess you are looking for this
/people/daniel.graversen/blog/2006/10/05/dynamic-configuration-in-adapter-modules
Regards
Suraj

Previously Firefox would show a number at the end of the file name (renaming the file by adding a number) showing that I had already downloaded a file at least once before. Recently that isn't happening. How do I get that feature back?

When downloading, previously Firefox would show a number at the end of the file name (renaming the file by adding a number) showing that I had already downloaded a file at least once. Now that isn't happening. How do I get that feature back?

When downloading, previously Firefox would show a number at the end of the file name (renaming the file by adding a number) showing that I had already downloaded a file at least once. Now that isn't happening. How do I get that feature back?

RQ: Receive files in folder with name of the sende...

Hello,
I don't know is I'm on the right place and I don't know is there same request, so I apologize if it exist...
Please, make option the received files to be saved in folder with the name of the sender. For example: my friend with skype name XYZ send me a file 'foo.bar' that will be saved in \My Documents\Skype_save (I changed the default dir); another friend with name XXY send me file 'foo1.bar' and again it will be in \My Documents\Skype_save, but when there are many files it is difficult to sort them and know whose files sended by who... So the good choise is if the files are saved in folder with name XYZ, XXY etc... Example:
\Skype_save\XYZ\foo.bar
\Skype_save\XXY\foo1.bar
I'm sorry for my bad english, it's not my native language. I hope you can understand what I mean with this folders

There is no automatic option in Skype that can do what you are trying to accomplish. However, you can in advance create save folders named as your contacts and and each time you receive a file, to save the file in the appropriate folder.
For this to function, you have to set the option in Tools -> Options -> IM settings -> Show advanced options to “Choose a folder where to save the file every time”.

Dynamic File Name - Suppress the Substitue varible

Hi All,
I am doing the scenarios like File name at the recevier end would be dynamic for that i take an extra field NAME mapped with UDF which return the file name dynamically. It is working fine and doing good. But the problem here is , this field is the first field in my target structure so i am getting an empty line in the target file.
So My structure as follows:
MT_BNK01 1..1
NAME 1..1
RECORD 0..Unbound
 --Record_data 0..Unbound
So in the recever side i written as follows
Recordset Structure:: RECORD
RECORD.fieldSeparator = 'nl'
RECORD.endSeparator = 'nl'
But according to this weblog i can suppress the empty line but it is not working
/people/sravya.talanki2/blog/2005/08/11/solution-to-the-problem-encountered-using-variable-substitution-with-xi-sp12
means, NAME is also in the same level of RECORD in the Structure. So How can i pass the structure as ??
I tried to pass the RecordSet Structure: NAME,RECORD
and following parameters, it is not working
NAME.fieldFixedLength =0
NAME.fieldLengthTooShortHandling = Cut
Can you please suggest me what could be the reason. Tell me what information i need to pass the RecordSet Structure and attrubute information also.
One more thing like, My sender side it is not picking the empty lines. What could be the reason. I given fieldSeparator and endSeparator as 'nl'. So to catch the empty line what i need to do???
Thanks in Advance,
Best Regards,
Vijay

Hi Vijaya,
This can be solved. Actually i had the same scenario where i was getting blank line for the header. Suppose Header was carrying the file name after i cut the value i would get a blank line in file.
So i added in content conversion parameter the following line
Header.endSeparator - '0'
then the first line was not blank.
Try this, i think your issue will be solved
Regards,
Ramesh P
Message was edited by:
 Ramesh Parashivamurthy

Should the web page address be included in the file name in the meta data dialog box?

In the page properties > meta data > below is a field with the label file name: (the the area to type in the field), after the field, it is labeled .html.
I have 2 questions here.
1. If I type in http//:www (my page url), do I include .html at the end? I didn't know if this is automatically added because it is off to the side of the field?
2. If I type in the entire URL address: http//:www (etc, etc).html, after closing the page properties dialog box, I make it a habit to double check my work. What happens is the http//:www.xxx changes to (htttpwww.xxx). It drops the //: on the URL.
So would it be better to just type in www.xxx (without the http//:www.xxx)
and do you type in the .html at the end?
I am assuming this will help with SEO page ranking or at least makes it easier for the search engines to crawl your site??
I hope this makes sense.
Advise would be very helpful.
Ben

You are absolutely correct with the URL Ben. Taking your above example, you just need to type in "Services" in the file name and the webpage will be exported as services.html and the URl will be www.xyz.com/services.html.
All the webpages (be it parent page or child page) gets physically saved at the root directory of your website on the server (where your website resides).
This name is just the name of the file using which it is physically stored and called from the server. It does not help search Engines to crawl deeper inside the website.
As I explained, "name which you wants the .html file to be stored with" here means the name of the physical file which is getting saved on the server.
Most users leave the file name same as Page name. If you have it different from page name then this will be the workflow :
Page Name : About
File Name : test
domain : www.mysite.com
Now if you are using a Menu Widget, it will list "About" in the Menu. And when end user will click on "About" then it will call the file named "test.html" from the server location (where all the files of your website are stored).
And it will open a page with address "www.mysite.com/test.html"
Hope I am able to explain the concept of File Name here. Please let us know if you have further queries on this.
Regards,
Sachin

Missing file name in the sequence

Hi All,
I have struck with the problem which is finding the missing file name in the file_name column. This column also have sequence.
FAX_NAME RECEIVED SENDER FAX_SIZE
fax000000433.tif 01-JAN-07 redro 10k
fax000000434.tif 01-JAN-07 redro 10k
fax000000435.tif 01-JAN-07 redro 10k
fax000000436.tif 01-JAN-07 redro 10k
fax000000437.tif 01-JAN-07 redro 10k
 One file name missing
fax000000439.tif 01-JAN-07 redro 10k
fax000000440.tif 02-JAN-07 redro 10k
fax000000441.tif 02-JAN-07 redro 10k
fax000000442.tif 02-JAN-07 redro 10k
fax000000443.tif 02-JAN-07 redro 10k
fax000000444.tif 02-JAN-07 redro 10k
fax000000445.tif 02-JAN-07 redro 10k
fax000000446.tif 02-JAN-07 redro 10k
fax000000447.tif 02-JAN-07 redro 10k
fax000000448.tif 02-JAN-07 redro 10k
fax000000449.tif 02-JAN-07 redro 10k
fax000000450.tif 02-JAN-07 redro 10k
Here i want to retrive the Faxname(fax000000438) which is missing
The output like..
I've Designed one BIRT rptdesign for this this in the bellow formate..
FAX_NAME RECEIVED SENDER FAX_SIZE Missing_Faxes
I've tried with bellow query but i did't get.
select Fax_Name digits from(select min(digits) MN from (select translate(s, '0' || translate(s, '1234567890', ' '), '0') digits 7 from (select filename s from received_faxes))) connect by level8 minus select distinct digits from (select translate(s, '0' || translate(s, '1234567890', ' '), '0') digits 10 from (select filename s from received_faxes))
Could you pls help me..

This?
SQL> with t1 as
2 (select 'fax000000433.tif' nam from dual union
3 select 'fax000000434.tif' from dual union
4 select 'fax000000435.tif' from dual union
5 select 'fax000000436.tif' from dual union
6 select 'fax000000437.tif' from dual union
7 select 'fax000000439.tif' from dual union
8 select 'fax000000440.tif' from dual union
9 select 'fax000000441.tif' from dual),
10 t2 as
11 (select to_number(mid(nam,4,9)) faxno from t1),
12 t3 as
13 (select max(faxno) ma, min(faxno) mi from t2)
14 select (mi+level - 1) faxno from t3 connect by level <= ma - mi + 1
15 minus
16 select faxno from t2
17 ;
 FAXNO
 438
SQL>

How can I edit the file name of the home page?

How can I edit the file name of the home page?
Gr Ammani

I have a similar issue with regards to the filename...
When I navigate to my website, it doesnt work unless I actually type the filename at the end of it. Example: type in "www.whitelion.com" (this is my real domain name) and it doesnt work. When I type in "www.whitelion.com/index.html" then it works.
This is obviously inconvenient because my clients will never know to add the filename to the end of the site.
Is there any setting or way to get the page to appear by just typing the original domain name without adding the extension?
Thanks,
Emelia

Getting the swf file name of the module

i have a parent application and it loads a module xyz.swf.
however, i don't know the name of the module the parent application is loading.
is there a way i can get the module's swf file name in the module code without knowing it beforehand?
thanks

Hi All,
Iam able to do this by checking the Option ASMA in only sender adapter itself
Regards
Bopanna

Assign Logical file name for the physical file path through Program

Hi all,
I am having a physical file which is getting generated dynamically. It is having the date and time stamp in its name which is added at runtime.
Now I need to assign a logical file name for the physical file path through the program.
Is there any FM or any other method to assign the same.
Gaurav

I think it is not possible. becuase the date & time added at runtime. so if you check the table PATH you can find filename and their definitions
a®

Error: Enter either the physical file name or the logical file name

Hi Expert,
I have error: Enter either the physical file name or the logical file name, when upload BP with external data transfer.
My Step:
1. Define Sender Structure
2. Define Transfer Rules
3. Start Transfer
When execute step 3, there's displaying error: Enter either the physical file name or the logical file name
Can you help my problem?
Any document/link for upload BP with external data transfer.
Thanks and Regards,

Hi,
See thread: [CO-PA External Data Transfer|CO-PA External Data Transfer]
Regards
Leon

Mail running under LIon no longer grays out the name of the sender of an email that has been read. How can I get that to happen?

Under the old version of Mail, when an e-mail was read, the name of the sender was greted out so that I knew I had read that email. This does not seem to happen under the new Mail thaqt came with Lion. Help!?
Chuck Humphrey
[email protected]
303-997-2755

Kirk,
Thanks again for your suggestions. No, I don't get an
error message. In fact nothing happens. My name and
key are typed in and from what I understand, once you
do that with a real key it directs you to the
registration page. When I get done entering the
information the window just sits there without any
button or option to continue.
QT Pro is already in the QT (non-pro) you installed and the key (which is a hash of your name in part) allows the Pro features to work.
No redirect, internet, nothing like that. As such many people have activated and think they haven't. Just look at the menu items and see if the "Pro" logo is shown next to a few (which are greyed out and not available without Pro). If not you are done.

Adding file name in the sender Adaptor

Similar Messages

Maybe you are looking for