File name issue in mail adapter attachement.
HI all,
i built a scenario proxy to mail in which the data will be sent as attachement to the mail id coming from proxy it self.
I added the transform bean and xi mail adapter bean correctly..
The scenario is working fine without errors...
however the issue is. i have given the file name in for module key :
Transform = Transform.ContentDisposition = attachement;filename="xyz.csv"
but while testing the attachement is coming as "untitled.txt"
i need the attachement to be named as "xyz.csv" only.
where went wrong ...please give ur inputs.
Thanx.
Hi Kiran
Then there is no need to use Transformation bean for this
In Mapping map the mail package Content_type field with
text/plain;name="xyz.csv"
and select mail package and keep attachments in receiver mail adapter
This will work
Thanks
Gaurav
Similar Messages
-
Not renaming attachment xml file name in receiver mail adapter
Hi,
I receive SOAP from GRC and need send to Partner an email.
I have SOAP to MAIL scenario where an xml file is picked up and transformed and zipped into the target format in XI which has to be sent as an attachement in an email on the receiver side.
I am getting the mail with the attachement. But I would like to rename the attachment as the name "NFE.XML" and the ZIP File as the name "nfe.zip"
I am using MAIL adapter with Modules above.
Number Module Name Module Type Module Key
1 AF_Modules/PayloadSwapBean Local Enterprise Bean Transform
2 AF_Modules/MessageTransformBean Local Enterprise Bean ContentType
3 AF_Modules/PayloadZipBean Local Enterprise Bean zip
4 sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean Local Enterprise Bean mail
Module Configuration :
Module Key Parameter Name Parameter Value
Transform swap.keyName payload-name
Transform swap.keyValue NFE
ContentType Transform.ContentType application/xml; name="NFe.xml"
zip zip.filenameKey ContentType
zip zip.mode zip
I am using transport protocol "XIPAYLOAD" and set "KEEP ATTACHMENTS"
I have with result example above :
Name from ZIP : PayloadName.zipu200E(4KB)u200E
Name from attachment : PayloadName
Regards,
RicardoHi Shobhit,
The module tab of your mail adapter will look like this.
Processing Sequence
Module Name Type Module Key
localejbs/AF_Modules/MessageTransformBean rename LocalEnterpriseBean
sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean mail Local EnterpriseBean
Module Configuration
Module Key Parameter Name Parameter Value
rename Transform.ContentDescription File
rename Transform.ContentDescription attachement;filename="yourfilename.ext"
rename Transform.ContentType application/text;name="yourfilename.ext"
Thanks
Amitanshu -
Renaming attachment file name in receiver mail adapter
Experts,
I have a file to mail scenario where an xml file is picked up and transformed into the target format in XI which has to be sent as an attachement in an email on the receiver side.
I am getting the mail with the attachement. But I would like to rename the attachment as the name of the picked up file.
I am using Adapter specific message attributes on both sides but the attachment is named as untitled.xml.
Please advise. Can this be achieved by using the swap bean or the message transform bean?
Regards,
ShobhitHi Shobhit,
The module tab of your mail adapter will look like this.
Processing Sequence
Module Name Type Module Key
localejbs/AF_Modules/MessageTransformBean rename LocalEnterpriseBean
sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean mail Local EnterpriseBean
Module Configuration
Module Key Parameter Name Parameter Value
rename Transform.ContentDescription File
rename Transform.ContentDescription attachement;filename="yourfilename.ext"
rename Transform.ContentType application/text;name="yourfilename.ext"
Thanks
Amitanshu -
How can i get message id as file name in Receiver Mail Adapter
Hi All,
We are working on file to mail scenario. Client requirement is " Attached file name should be the message id" How can we achieve this.
Thanks & Regards,
PurshothammHi,
To have the file name as message id, I think the below blogs can help you
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
/people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii
Regards,
Vijay N -
Email attachment name in sender mail adapter to the receiver file adapter
HI ,
Ths is regarding email to file scenario. I am trying to create file (in rceiver file adapter) with the same name as the email attachment that i read from mail sender adapter. I want ro use adapter module for this. I could find from blogs that there is module - GetAttachmentName - available that i can use for this in sender mail adapter.
Can you please let me know what whetehr i neeed to mention any module key and parameters for this.
I assume , i need to do following steps :Please confirm.
1. i can use this module - after payload swap module and before standard mail adapter module in sender mail adapter
2. select ASMA option in advanced tab in sender mail adapter
3. In receiver file adapter select ASMA option in advanced tab in sender mail adapter
4. Also select file name option in ASMA in sender mail adapter
Thanks,
VamsiHi Vamsi,
your scenario is also described here: Re: sender mail adapter - attachment name
If you use the Module getAttachmentName, which is described here,
http://wiki.sdn.sap.com/wiki/display/XI/AdapterModulePI7.0GetAttachmentName
your scenario should work as you described it.
You just need to make sure that the Attachment Name that you read in the first place, is mapped to the Filename Attribute of the
Fileadapter (http://sap.com/xi/XI/System/File/FileName).
regards,
Daniel -
HI Experts,
I have a scenario. Import IDOC into PI and PI transform IDOC to Excel. Using mail adapter attach that Excel using pi and send to vendor. Can you please help me on the same?
Thanks
SaiSreevastavHi Sai,
you can use XSLT or java mapping or adapter module to convert IDOC xml to XLS. Please refer the below blog
Convert incoming XML to Excel or Excel XML – Part 1 - XSLT Way
Convert incoming XML to Excel Sheet Part 2 – Adapter Module way
Convert incoming XML to Excel Sheet
then after converting to Excel, you can use the payloadswap bean in mail adapter
XI: Sender mail adapter - PayloadSwapBean - Step by step
regards,
Harish -
How to find the File name using the FTP Adapter
hi all,
how to find the File name using the FTP Adapter with BPEL.
RegardsFound the solution for this.
First In the mediator's routing rule use assign property $in.property.jca.file.FileName to $out.property.jca.file.FileName
In the BPEL's receive activity go to the properties tab and get the property to a BPEL variable. That should do it.
Thanks for the posts -
Mail adapter- Attachment file name of scheme ddmm
Hi ,
I am working on File to Mail scenario.
I checked on SDN, but I could not find exact solution.
My requirement is :
I need to mail HTML report file as attachment.
To generate attachment file, I have done XSL mapping.
Attachment file name should be : yyyymmdd.htm
Mail text should be: This is autogenerated mail, please do not reply.
Mail subject: SAP XI report ddmmyyy
Please provide your inputs.
Best Regards,
DivyeshHi Henrique,
Thanks a lot for your response.
Your answer is very helpful.
I tried your code.
I am getting error in RWB: here I am including audit Log:
2009-04-02 17:39:41 Success MP: Entering module processor
2009-04-02 17:39:41 Success MP: Processing local module localejbs/CreateAttachment
2009-04-02 17:39:41 Success MP: Processing local module localejbs/sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean
2009-04-02 17:39:41 Success Mail: message entering the adapter
2009-04-02 17:39:41 Success Mail: Receiver adapter entered with qos ExactlyOnceInOrder
2009-04-02 17:39:41 Success Mail: calling the adpter for processing
2009-04-02 17:39:42 Error Mail: call failed; java.io.IOException: Missing mandatory element <sap:Manifest><sap:Payload><sap:Name>
2009-04-02 17:39:42 Success Mail: sending a delivery error ack ...
2009-04-02 17:39:42 Success Mail: sent a delivery error ack
2009-04-02 17:39:42 Error MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: java.io.IOException: Missing mandatory element <sap:Manifest><sap:Payload><sap:Name>
2009-04-02 17:39:42 Error Mail: error occured: com.sap.aii.af.ra.ms.api.RecoverableException: java.io.IOException: Missing mandatory element <sap:Manifest><sap:Payload><sap:Name>
2009-04-02 17:39:42 Error Exception caught by adapter framework: java.io.IOException: Missing mandatory element <sap:Manifest><sap:Payload><sap:Name>
2009-04-02 17:39:42 Error Delivery of the message to the application using connection Mail_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: java.io.IOException: Missing mandatory element <sap:Manifest><sap:Payload><sap:Name>.
2009-04-02 17:39:42 Success The message status set to WAIT.
Can you please provide me help on this?
Best Regards,
Divyesh -
Dynamic attachment name in receiver mail adapter
Hi all,
i am doing a receiver mail scenario (PI 7.1). my requirement is like this :
Receiver file need to be send in receiver mail attachment and attachment name should be dynamic
format for the attachment name should be like this
R+value from a particular field in payload +Timestamp
for example my file name should be like this R001_510815021009062532.xml
which is R+ 001_510815 + 021009062532 + .xml
can anybody suggest me how to go for this requirement? is ther any UDF or should i go for adapter module developement?
Thanks
sandeep sharma
Edited by: sandeep sharma on Oct 13, 2009 8:55 AMHi K Fatima,
I read your solution.I have a similar requiement but I need to send the entire output payload as an attachment,so I am using XSLT to send the payload as an attachment.
I am creating the file name through dynamic configuration in XSLT but the name of attachment is not as required but its any random generated name:
*code used:*
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:fo="http://www.w3.org/1999/XSL/Format" xmlns:map="java:java.util.Map"
xmlns:dyn="java:com.sap.aii.mapping.api.DynamicConfiguration"
xmlns:key="java:com.sap.aii.mapping.api.DynamicConfigurationKey">
<xsl:output method="xml" version="1.0" encoding="UTF-8" />
<xsl:output indent="yes" />
<xsl:param name="inputparam"/>
<!-- mail parameters -->
<xsl:template match="*">
<ns:Mail xmlns:ns="http://sap.com/xi/XI/Mail/30">
<xsl:variable name="new-value" select="Shipment/InternalShipmentNum"/>
<Subject>Mail</Subject>
<From>xyz</From>
<To>abc</To>
<xsl:variable name="dynamic-conf"
select="map:get($inputparam, 'DynamicConfiguration')" />
<xsl:variable name="dynamic-key"
select="key:create('http://sap.com/xi/XI/System/File', 'Directory')" />
<xsl:variable name="dynamic-value"
select="dyn:get($dynamic-conf, $dynamic-key)" />
<xsl:variable name="new-value"
select="concat($dynamic-value, 'subfolder\')" />
<xsl:variable name="dummy"
select="dyn:put($dynamic-conf, $dynamic-key, $new-value)" />
<!--Content type -->
<Content_Type>application/xml</Content_Type>
<!Content Description>
<Content_Disposition>attachment;filename "<xsl:copy-of select="$new-value"/>"</Content_Disposition>
<!--Content Disposition -->
<Content_Description><xsl:copy-of select="$new-value"/></Content_Description>
<Content>
<xsl:copy-of select=".">
<xsl:apply-templates/>
</xsl:copy-of>
</Content>
</ns:Mail>
</xsl:template>
</xsl:stylesheet>
Please suggest ! I need the value in "Shipment/InternalShipmentNum" as name of attachment.
Thanks in advance!
Indu Khurana -
Dynamic attachment name with receiver mail adapter and use mail package
We need to send mapped XML payload as attachment (with dynamic name) to a recepient (recepient email id is part of input xml payload, but not part of the mapped XML payload).
I could probably do this using the adapter module (as per the following link),
http://wiki.sdn.sap.com/wiki/display/XI/Adapter%20Module%20PI%207.0%20Set%20Attachment%20Name?bc=true
I would like to explore if this would be feasible using Mail package and XI payload.I already have a Java mapping that is converting the input XML to required Output format. If I am using Mail package (XI Payload), how do I go about sending this Output XML from java mapping as attachment to email id available in the input payload?Hi,
1) XML payload as attachment (with dynamic name)
2) recipient (recipient email id is part of input xml payload, but not part of the mapped XML payload)
These two is possible by using Mail Package. You have a standard xsd for mail package which you can download from the SAP Note 748024.
The xml created in you java mapping which will be your attachment should be put into the <content> tag of the mail package xml structure. and the file name can be set in the <Content_Type> tag.
<?xml version="1.0"; encoding="UTF-8"?>
<p2:Mail xmlns:p2="http://sap.com/xi/XI/Mail/30">
<Subject>My Invoice</Subject>
<From>from email address<;/From>
<To>to email address</To>
<Content_Type>text/plain;name="MyFile.csv";</Content_Type> --> file name here
<Content>123;A49;aaa</Content> -> attachment xml here
</p2:Mail>
And you have to select MailPackage in the receiver mail adapter.
Regards,
Aravind -
Sender mail adapter - attachment name
Hi there
We have configured a sender email adapter to receive text/csv attachments and save them to a file system. What we are having a problem with is reading the attachment name. So we are using Dynamis Configuration to create the file name using the subject line - Which is not ideal. Ideally we would like to use the same name as the origianl attachment but haven't found any way of doing that. We even tried using Content-type in the Variable Header (XHeaderName1) suing variable transport binding but it doesn't show up in the Dynamic Config part of the SOAP message.
Is there any way of reading the name of the file attachment? We are on PI release 7.0.
Any help would be appreciated.
Cheers
SalilHi Vitor
There are 2 scenarios that I can think of -
1. You are saving the email attachment as a file. In that case use step 3 in the earlier reply to get the attachment name and save the file witht that name.
2. You are sending the XML straight to a receiver using HTTP, IDOC, JDBC etc. in which case you would need the attachment name much earlier that step 3. For that I guess you would have to write another adapter module on the sender mail adapter(at Position 3 where position1 = payloadswap bean, 2 = custom module to get the attachment name) and add an xml tag to your incoming message. These adapter modules are really powerful and are like user exits in ABAP. In that case you would have to change the Data Type in the Integration repository to reflect that extra tag. Here is some code from a module we wrote to totally change the structure of the xml coming in. The key thing to remember is this module is that you can read the whole message byte by byte. There might be smarter ways of doing it (like using the SAP XML parser factory class) but since I'm not a Java programmer I stuck to the basics. Here's the code( you could also look at the example given in sap help where they remove (or add I'm not sure) CR(carriage return) from CRLF (CR Line feed).
Created on Aug 8, 2007
To change the template for this generated file go to
Window>Preferences>Java>Code Generation>Code and Comments
package jdbcPackage;
import javax.ejb.CreateException;
import javax.ejb.SessionBean;
import javax.ejb.SessionContext;
import com.sap.aii.af.mp.module.*;
import com.sap.aii.af.ra.ms.api.*;
@author Salil.Mehta Soltius NZ Ltd
To change the template for this generated type comment go to
Window>Preferences>Java>Code Generation>Code and Comments
public class jdbcClass implements SessionBean, Module {
private SessionContext myContext;
public void ejbRemove() {
public void ejbActivate() {
public void ejbPassivate() {
public void setSessionContext(SessionContext context) {
myContext = context;
public void ejbCreate() throws CreateException {
public ModuleData process(
ModuleContext moduleContext,
ModuleData inputModuleData)
throws ModuleException {
// put your code here
try {
Message msg = (Message) inputModuleData.getPrincipalData();
XMLPayload payload = msg.getDocument();
String payEnc = payload.getEncoding();
byte[] payByte = payload.getContent();
byte[] payByteOut = new byte[payByte.length];
byte[] payByteTemp = new byte[payByte.length];
int i;
int j;
int actualCount = 0;
char xmlTagFound = ' ';
char endXmlTagFound = ' ';
char tagFound = ' ';
System.arraycopy(payByte, 0, payByteTemp, 0, payByte.length);
// Step 1 - Conversions
// convert "< to <" and "> to >"
// convert " to "
// This will remove any carriage returns and line feeds
// and the <XML* and </XML* tags plus the <row> and </row> tags
for (i = 0; i < payByte.length; i++) {
// convert < to < and > to >
if (payByteTemp<i> == '&') {
if (payByteTemp[i + 1] == 'l') {
if (payByteTemp[i + 2] == 't') {
if (payByteTemp[i + 3] == ';') {
payByteTemp<i> = '<';
payByteTemp[i + 1] = '\n';
payByteTemp[i + 2] = '\n';
payByteTemp[i + 3] = '\n';
if (payByteTemp<i> == '&') {
if (payByteTemp[i + 1] == 'g') {
if (payByteTemp[i + 2] == 't') {
if (payByteTemp[i + 3] == ';') {
payByteTemp<i> = '>';
payByteTemp[i + 1] = '\n';
payByteTemp[i + 2] = '\n';
payByteTemp[i + 3] = '\n';
if (payByteTemp<i> == '&') {
if (payByteTemp[i + 1] == 'q') {
if (payByteTemp[i + 2] == 'u') {
if (payByteTemp[i + 3] == 'o') {
if (payByteTemp[i + 4] == 't') {
if (payByteTemp[i + 5] == ';') {
payByteTemp<i> = '"';
payByteTemp[i + 1] = '\n';
payByteTemp[i + 2] = '\n';
payByteTemp[i + 3] = '\n';
payByteTemp[i + 4] = '\n';
payByteTemp[i + 5] = '\n';
// This will take in the initial xml declaration from the Byte array
// And we also don't want the stuff after the xml declaration till
// we reach the first <row> tag
if (xmlTagFound == ' ') {
if (payByteTemp<i> == '>') {
xmlTagFound = 'X';
payByteOut[actualCount++] = payByteTemp<i>;
if (xmlTagFound == 'X') {
payByteOut[actualCount++] = '\r';
continue;
if (xmlTagFound == 'X') {
if (payByteTemp<i> == '<') {
if (payByteTemp[i + 1] == 'r') {
if (payByteTemp[i + 2] == 'o') {
if (payByteTemp[i + 3] == 'w') {
if (payByteTemp[i + 4] == '>') {
xmlTagFound = 'Y';
} else {
continue;
} else {
continue;
} else {
continue;
} else {
continue;
} else {
continue;
// Carriage return and line feed
if ((payByteTemp<i> == '\r') || (payByteTemp<i> == '\n')) {
continue;
// <XML_*> tag
if (payByteTemp<i> == '<') {
if (payByteTemp[i + 1] == 'X') {
if (payByteTemp[i + 2] == 'M') {
if (payByteTemp[i + 3] == 'L') {
tagFound = 'X';
endXmlTagFound = ' ';
continue;
// </XML_*> tag
if (payByteTemp<i> == '<') {
if (payByteTemp[i + 1] == '/') {
if (payByteTemp[i + 2] == 'X') {
if (payByteTemp[i + 3] == 'M') {
if (payByteTemp[i + 4] == 'L') {
tagFound = 'X';
endXmlTagFound = 'X';
continue;
// <row> tag
if (payByteTemp<i> == '<') {
if (payByteTemp[i + 1] == 'r') {
if (payByteTemp[i + 2] == 'o') {
if (payByteTemp[i + 3] == 'w') {
if (payByteTemp[i + 4] == '>') {
tagFound = 'X';
continue;
// </row> tag
if (payByteTemp<i> == '<') {
if (payByteTemp[i + 1] == '/') {
if (payByteTemp[i + 2] == 'r') {
if (payByteTemp[i + 3] == 'o') {
if (payByteTemp[i + 4] == 'w') {
if (payByteTemp[i + 5] == '>') {
tagFound = 'X';
continue;
if ((payByteTemp<i> == '>') && (tagFound == 'X')) {
tagFound = ' ';
continue;
if (tagFound == ' ') {
if (endXmlTagFound == 'X') {
continue;
payByteOut[actualCount++] = payByteTemp<i>;
byte[] payByteExp = new byte[actualCount];
System.arraycopy(payByteOut, 0, payByteExp, 0, actualCount);
payload.setContent(payByteExp);
msg.setDocument(payload);
inputModuleData.setPrincipalData(msg);
} catch (Exception e) {
ModuleException me = new ModuleException(e);
throw me;
return inputModuleData; -
Mail Adapter - attachment file?
Hi,
I use the Mail Adapter (XIPAYLOAD) in order to send an email from XI to a Mail Server (Lotus Notes); but content of my email is inside an attachment file.
If I choose "keep attachement", then I have an attachement file with "xxxx<b>.xml</b>".
e.g: [email protected]
If I don't choose "keep attachment", then I have an attachement file with "xxxx<b>.dat</b>".
e.g: att4a5o8.dat
Is there a solution to have the content directly in the email and not inside an attachement?
And is it possible to change the file name?
Regards
Mickael.Use the Option 'Use Mail Package'. In this case the message will be sent out inside the mail.
The mail package is a special message type you have to provide to the mail adapter. You have to do a mapping from your message to the mail package message type.
Here is a sample XSLT for creating a mail package out of any XML Message:
<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0">
<xsl:output method="xml" indent="yes" />
<xsl:template match="*">
<ns:Mail xmlns:ns="http://sap.com/xi/XI/Mail/30">
<Subject>Hallo</Subject>
<From>[email protected]</From>
<To>[email protected]</To>
<Content><xsl:copy-of select="/"/></Content>
</ns:Mail>
</xsl:template>
</xsl:stylesheet>
Regards
Stefan -
Problem Mail-Adapter attachment with specified name
Hi,
We have the following scenario:
We have some EDIFACT-suppliers which we have to connect over Mail-adapter.
We have to fullfill several specifications by sending the mail.
So we have to create a specific filename for the EDI-attachment and the subject. Therefore I used the adapterspecific attribute THeaderSUBJECT, which we set in Mapping. This works fine.
Now the problem: We have to send only the payload-document as attachment of the mail with the same name as the subject of the mail. So we can't use the keep-attachment flag because then all attachments of this message would be sent in the mail.
How is it possible to send only the payload as attachment without any other documents and with specified filename in the attribute THeaderSUBJECT?
Has anybody an idea how to solve this problem?
Regards
ThorstenHi,
I have found a solution.
In a new module I copy the original paload to the payload of a new message object without attachments.
After calling this module I call the standard module MessageTransformBean to transform the payload into the attachment of the message.
Here the code of my module:
String fileName = msg.getMessageProperty("http://sap.com/xi/XI/System/Mail","THeaderSUBJECT");
// Generate new message object
Context ctx = new InitialContext();
ConnectionFactory cf = (ConnectionFactory) ctx.lookup(com.sap.aii.af.ra.ms.api.ConnectionFactory.JNDI_NAME);
MessageFactory factory = cf.createMessageFactory("XI");
Message msgnew = factory.createMessage(msg.getFromParty(),msg.getToParty(),msg.getFromService(),msg.getToService(), msg.getAction());
msgnew.setConversationId(msg.getConversationId());
msgnew.setDeliverySemantics(msg.getDeliverySemantics());
msgnew.setCorrelationId(msg.getMessageId());
msgnew.setMessageProperty("http://sap.com/xi/XI/System/Mail","THeaderSUBJECT",fileName);
String contentType = new String("text/plain;name="" + fileName + """);
// Copy original message to the new message
XMLPayload payload = (XMLPayload)(msg.getDocument());
payload.setContentType(contentType);
payload.setDescription("file");
payload.setName(fileName);
msgnew.setDocument(payload);
Now it works like it should work.
Regards
Thorsten -
How to keep same sender file name for receiver mail attachement
Hi,
i am working with File to Mail scanario. There i want to pick a flat file from native file system and then send it as email attachment. Now i am able to send the file but the flat is getting converted as an xml file. is there any method to keep the same sender file name and type for receiver mail attachment. i am not using any mail package. i am using XI payload and keep attachments.
Thanks in advance.
-SivaHi,
Yes,With out using the mail package u can send the Mail Attachments to the receiver side,
In that case no need of Integration Repository objects.
Chck this links.
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure
/people/community.user/blog/2006/09/07/email-reporting
/people/community.user/blog/2006/09/08/email-report-as-attachment-excelword
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address
/people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter
If u dont get ur requirement then let me know ur Mail id i will send u a Doc.
Regards,
Phani
Reward points if Helpful -
Dynamic attachment name in receiver mail adapter for 1 attachment?
Hi,
seems to be a tricky thing....
The sender interface (file) picks up an xml file and a pdf document.
The receiver wants to get the xml file as a txt file and the pdf, both sent together by mail.
We are following this thread:
"Sending multiple attachments winthin a single Receiver Mail adapter in required format".
So far we are able to generate the txt file and send it together with the pdf to the recipient.
The txt file gets its name from the payload of the xml file.
Unfortunately the pdf should be renamed to the same name as the txt file.
And here we are stuck.
We generate the filename for the txt file in the mapping to the mail message (as usual ximail30.xsd).
But for the pdf we are only able to set a static name in the channel module page using
Transform.ContentDisposition.
Any ideas how to solve this are really welcome!!!!
(Solutions that do not talk about using a new module to be written are prefered.)
Regards
DirkHi,
seems to be a tricky thing....
The sender interface (file) picks up an xml file and a pdf document.
The receiver wants to get the xml file as a txt file and the pdf, both sent together by mail.
We are following this thread:
"Sending multiple attachments winthin a single Receiver Mail adapter in required format".
So far we are able to generate the txt file and send it together with the pdf to the recipient.
The txt file gets its name from the payload of the xml file.
Unfortunately the pdf should be renamed to the same name as the txt file.
And here we are stuck.
We generate the filename for the txt file in the mapping to the mail message (as usual ximail30.xsd).
But for the pdf we are only able to set a static name in the channel module page using
Transform.ContentDisposition.
Any ideas how to solve this are really welcome!!!!
(Solutions that do not talk about using a new module to be written are prefered.)
Regards
Dirk
Maybe you are looking for
-
Ever since upgrading to 10.9 i have noticed my computer running out of ram during what i would call normal work conditions. I did not have this problem in 10.8, since upgrading i have to do a sudo purge to get my memory back. The only open programs a
-
I just bought a Tascam US144 interface to try and import various audio into Garageband. I get power to the 144 and see the LED indicating that it's capturing audio but nothing is recorded in GB. I have gone to preferences and set the audio input to t
-
Bulletin Board boot does not bring up services
Hello, I am trying to create a new tuxedo server, i have built it successfully and have included the server name in the servers section of the Config File . The Config File was built to create the Tuxconfig file.It successfully created the binary fil
-
The Contacts app continually adds last names that I edit out. this happens across MacBook, iPhone, and iCloud. I have even fully deleted the contact and reentered. I am about to move to Android !! From posts it looks like this is a common problem
-
In Windows Server 2012 how do I open the "Active Directory Domain Services Configuration Wizard" to install a child domain, a domain controller and a RODC other than thru a Notification?