File name with latest time stamp for inbound interface

Hi experts,
I have a requirement to develop an inbound interface in which I need to fetch the all files from the physical directory, and then retrieve the one with the latest timestamp. I found out the FM 'SUBST_GET_FILE_LIST', but this FM does not gives me the timestamp.
Is there any other FM/table through which this can be achieved?
Thanks,
Mohit.

Can you please try with these functionmodules???
1)ITS_DIRECTORY_LIST_FILES
2)CL_GUI_FRONTEND_SERVICES=>DIRECTORY_LIST_FILES

Similar Messages

  • File name with Dateand time stamp.

    Hi All,
    I want to generate a file with a date and time stamp.
    For that in File Receiver adaptor i am using option "Add Time Stamp" in File Construction mode. however it is generationg file name as: FileName_20082104_121211_645.txt . In this I don't know what these last three characters "_645" are? And In the File name i only want a file name with datetime stamp . I don't require underscore in between. for eg: FileName_20082104121211.txt (FileName_dateTime.txt)
    Can anybody suggest me the way to achive this?
    Thanks,
    Atul

    @FileName_20082104_121211_645
    The date time stamp in XI's file adapter will be in that format. This is to avoid over writing of files created simultaneously at the same time. So the last 3 digits is a form of an unique id to distinguish between the same.
    In case you want the format as FileName_20082104_121211, use the dynamic configuration and create the file name inside the mapping itself and pass it across.
    To get an idea about the same, ref:
    /people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14 - an usage of the same.
    http://help.sap.com/saphelp_nw04/helpdata/en/43/03612cdecc6e76e10000000a422035/frameset.htm

  • When I open up an e-mail attachment a box pops up PRINT TO FILE below that line OUTPUT FILE NAME with an empty line for the file name vs. simply going to my default printer?

    when I open up an e-mail attachment a box pops up PRINT TO FILE below that line OUTPUT FILE NAME with an empty line for the file name vs. simply going to my default printer?

    Make sure that '''''Print to File''''' isn't selected in the native print dialog box ''(see screenshot below)'' middle-right, and make sure your Printer is selected at the top of that dialog box.
    ''I'm a little confused why an email attachment would need to go directly to the printer, but that's what you asked about.''

  • Using the regex to match the file name with date time

    Hello all,
    currently I had problem to match the following file name with the date time. Of course I can use this regex like ""(\\\\w+|.+).(zip)" to match it. However in the current application i need to parse the file name and get the current date time to check if it is matched. Does anyone have good idea?
    {code}
    testfile10-08-09-2008-08-21-04-24-0443.zip
    testfile11-08-09-2008-08-22-04-24-0441.zip
    {code}
    thanks in advanced!

    lauehuang wrote:
    Hello all,
    currently I had problem to match the following file name with the date time. Of course I can use this regex like ""(\\\\w+|.+).(zip)" to match it.That regex doesn't make a lot of sense:
    - with "\\\\w" you probably meant "\\w";
    - "\\w+|.+" doesn't make sense: you can simply do ".+" in that case;
    - ".(zip)" will also match the string "%zip" or "Ezip".
    However in the current application i need to parse the file name and get the current date time to check if it is matched. I don't know what you mean by that.

  • Read file  : File name conatins the Time stamp from payload

    Hi
    I have to scenario where i am creating file name  based on the payload field ( Date/time), theni have to pick up the files based on the File Name :
    Ex:  0212200910:01:02
           0212200910:01:03
           0212200910:01:01
    then the sender adapter should pick up the file 0212200910:01:01 file first and 0212200910:01:02 second
    0212200910:01:03 third ...
    the sender adater pick up files based on file name i.e Timestamp
    how to achieve that

    Hi,
    In the Sender File Adapter, goto Processing Tab and change Processing Sequence to By Name.
    Regards,
    Balaji.M

  • Reading from a file. How to ask the user for file name at run time????

    I have the code to read from a file but my problem is how to prompt the user for the file name at run time.
    import java.io.File;
    import java.io.FileNotFoundException;
    import java.util.InputMismatchException;
    import java.util.Scanner;
    public class FileRead {
        public static void main(String args[]) {
            Scanner scan = null;
            File file = new File("Results.txt");
            String number;
            try {
                scan = new Scanner(file);
                while (scan.hasNext()){
                number = scan.next();
                System.out.println(number);}
            catch (FileNotFoundException ex1){
                System.out.println("No such file");
            catch (IllegalStateException ex2){
                System.out.println("Did you close the read by mistake");
            catch (InputMismatchException ex){
                System.out.println("File structure incorrect");
            finally{
                scan.close();}
    }Any hints would be greatly appreciated. Thank you in advance

    I have read through some of the tutorials that you have directed me too and they are very useful, thank you. however there are still a few things that i am not clear about. I am using net beans 5.0 I have placed a text file named Results.txt into the project at the root so the program can view it.
    When I use the code that you provided me with, does it matter where the file is, or will it look through everywhere on the hard drive to find a match?
    This code compiles but at run time it comes up with this error
    run-single:
    java.lang.NoClassDefFoundError: NamedFile
    Exception in thread "main"
    Java Result: 1
    BUILD SUCCESSFUL (total time: 3 seconds)
    import java.util.Scanner;
    import java.io.*;
    class NamedFileInput
      public static void main (String[] args) throws IOException
        int num, square;   
        // this Scanner is used to read what the user enters
        Scanner user = new Scanner( System.in );
        String  fileName;
        System.out.print("File Name: ");
        fileName = user.nextLine().trim();
        File file = new File( fileName );     // create a File object
        // this Scanner is used to read from the file
        Scanner scan = new Scanner( file );     
        while( scan.hasNextInt() )   // is there more data to process?
          num = scan.nextInt();
          square = num * num ;     
          System.out.println("The square of " + num + " is " + square);
    }his is the code that i used. It is the same as the code you posted for me (on chapter 23 I/O using Scanner and PrintStream) Sorry im just really stuck on this!!

  • I am using OSX 10.9.5 and Outlook Web App for emails. When I download an attachment it replaces the space in the file name with   - how can I change this?

    I am using OSX 10.9.5 and Outlook Web App for emails. When I download an attachment it replaces the space in the file name with %20  - how can I change this?

    Click on the below link :
    https://get.adobe.com/flashplayer/otherversions/
    Step 1: select Mac OS  X 10.6-`0.`0
    Step 2 : Safari and FIrefox
    Then click on " Download Now"  button.

  • CUOM 2.3 sends multiple notifications for Event StoppedGSUPerformancePolling with same time stamps

    Hi Alll,
    I have a CUOM Version 2.3 which shows mutiple notifications per Device for Event StoppedGSUPerformancePolling with same time stamps. The message below is generated from the default All_Events for all devices.
    Does anyone have a solution for that.
    Regards Michael
    This message is generated 8 times with the same time stamp in all messages.
    ** This message is generated from Cisco Unified Operations Manager **
    ALERT ID                = 00012OW
    CREATION TIME           = Sat 30-Oct-2010 16:31:57 CEST
    MODIFIED TIME           = Sat 30-Oct-2010 17:00:58 CEST
    STATUS                  = Active
    SEVERITY                = Critical
    MANAGED OBJECT          = 183.201.141.193
    MANAGED OBJECT TYPE     = VoiceGateway
    ASSOCIATED EVENTS       =
        Cleared:183.201.141.193:Unresponsive
        Active:183.201.141.193:StoppedGsuPerformancePolling
    CUSTOMER IDENTIFICATION = Voice Port
    CUSTOMER REVISION       = Voice Port

    if you get SNMP timeout on multiple devices then the fault usually lies in the path that the polling follows to get to these devices and back to the server.
    The problem obviously lies in the part path they have in common.
    It is not unusual to see the highest backbone loads during the night, due to backups being taken.
    Make sure the most important inter-switch links have no errors.
    I would rather fix this then turn off alerting.
    Cheers,
    Michel

  • FM for getting teh file name with path

    Hi guys,
    Is there an fm getting the file name with path given the physical path and file name? Thanks!

    Hi Mark,
    Function Module WS_FILENAME_GET is obsolete, dont use it.
    Use the Method file_open_dialog of  class cl_gui_frontend_services as given below.
    DATA:
        lt_filetable TYPE filetable,
        lf_rc        TYPE i,
        lv_filename(50) TYPE c,
        lv_fileext(3) TYPE c,
        ls_file TYPE file_table,
        lv_file TYPE localfile,
        lv_title TYPE string.
      lv_title = sy-title.
      lv_progname = sy-cprog.
      CALL METHOD cl_gui_frontend_services=>file_open_dialog
        EXPORTING
          window_title            = lv_title
          file_filter             = '*.txt'
          multiselection          = abap_false
        CHANGING
          file_table              = lt_filetable
          rc                      = lf_rc
        EXCEPTIONS
          file_open_dialog_failed = 1
          cntl_error              = 2
          error_no_gui            = 3
          not_supported_by_gui    = 4
          OTHERS                  = 5.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE 'S' NUMBER sy-msgno
                   DISPLAY LIKE 'E'
                   WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        EXIT.
      ENDIF.
    * Number of selected filed must be equal to one.
      CHECK lf_rc = 1.
    * Access selected file
      READ TABLE lt_filetable INTO ls_file INDEX 1.
      CHECK sy-subrc = 0.
      lv_file = ls_file-filename.
      SPLIT lv_file AT '.' INTO lv_filename lv_fileext.
    Revert back if you need clarifications.
    Regards
    Karthik D

  • Save the file and give date & time stamp

    1. Reading the Excel file from the selection screen as a parameter.
    2. Using F.M. ALSM_EXCEL_TO_INTERNAL_TABLE reading Excel file into
        Internal table.
    3. Implementing the Business Logic.
    4. Move output to Final Internal table.
    5. Final internal table should generate a Flat file. By using GUI_DOWNLOAD.
    6. That flat file should be saved with the name and location given in the Excel.
    7. When ever I run the program output file will generate in the same location but with date and time stamp. Because I’m running the program for range of employees say initially I run for 1 – 10,000 employees next 10,001- 20,000 like that.
    Whenever I run for 2nd time it will overwrite the previous output, that’s the reason I’m using date and time stamp.
    Eg:
    PERSONAL Numbers              Name                                         Location
    00000001                 xxxxx-24.04.2007-10.30          C:\        
    00000002                 xxxxx-24.04.2007-10.35
    00000003                 xxxxx-25.04.2007-10.40
    00000004                                  xxxxx-25.04.2007-10.30
    Can any one help me how to save the file and give date & time stamp through hardcode?
    please help me in this issue.

    I am not clear with your problem. Based on the understanding of your question,
    there  can be two cases.
    1- U want to insert time stamp in the output file.
    2- Time stamp is already there, u just have to solve the overwriting issue.
    If your question goes with option 2, You can make use of import parameters
    <b>CONFIRM_OVERWRITE</b> : Which will ask for confirmation before overwriting.
    <b>APPEND</b> : which you can choose either to append the data to the existing file or overwrite it.
    Please inform if the issue is not resolved.
    Message was edited by:
            BINU RAJ BINU

  • WRT610N certain file types have wrong time stamp

    Hi, I have searched this forum for a similar problem with no luck - so here goes...
    I have a WRT610N router using the latest firmware 1.00.03 B15. After upgrading the firmware I reset router for 30 sec., and then powerdown for 30 sec. as I have read on this forum, and yes the USB drive was disconnected before hand, but I still have this problem when creating/saving certain file types on the USB drive attached to the router.
    I have discovered that MS Word and PowerPoint files (.doc & .ppt) are saved with the correct date and time, but MS Excel, Notepad, and HTML files (.xls, .txt, and .mht) are saved with a time stamp that is one hour later!!! There may be other file types that are affected by this as well.
    Example: I create/save a Word file and also an Excel file at 1:00 PM, When I use Windows Explorer to view the details of the files on the USB drive, the Word file has a timestamp of 1:00 PM, but the Excel file has a timestamp of 2:00 PM (in the future). All other functions on the router seem to be OK.
    If I create these five file types on the C: drive they all have the same timestamps, I also have a Netgear SC101 NAS which shows the correct timestamps. I only have this problem when using the USB drive connected to the WRT610N. I tried this on 3 different computers - all have the same issue.
    This may seem like a minor issue, but Im using SmartSync Pro to back up all the drives on the LAN and it uses the file's timestamp to determine if it should be backedup or not. So Im concerned that backups may not be done properly, or God knows what it will do with files from the future!
    Im using WinXP SP3, the USB drive is a WD2500BEVS - 250GB with 4 partitions (largest is 120GB) all formatted as NTFS.
    I would appreciate it if others would try this and post their results here so I would know whether to bug Linksys for a fix, or if I have problems elsewhere in my configuration.  Thank you.

    Well, 15 days, 40 views, 0 replies.
    Could one kind sole, just one, please; startup Notepad, save an empty .txt file to the USB drive on the router, and then let me know if the file had the correct time stamp?
    Preferably someone with a ver 1 router, firmware 1.00.03 B15, and running WinXP SP3.
    Thanks in advance.

  • Lightroom 5 will not sort images properly, either by file name or capture time.  How can I fix this issue?

    I am using Lightroom 5 with OSX 10.9.2 and the sorting feature is not working properly.  When I try to sort my library by file name or capture time, it does not sort properly.  The order of images is mixed and stays that way, even after reboot.  The file information is correct, the sorting is the only issue.  The library is approximately 6,000 images and I am also using a plug in with the Publishing Service feature.  Any help on how to fix this issue without losing my editing work done on the library would be appreciated.  Thanks! Dan

    Thanks! I'm trying to sort by capture time or file name, and neither sorts correctly.  file names 3450, 3451, etc. before files 0234, 0235, etc.  It makes no sense.  Same with capture time.  Times are accurate in meta data, but sorting is just wrong.  I'm using a ShootProof plug in that is only used for uploading files to the web. The issue is in the main library folder, so I'm not sure the plugin has anything to do with it.  Any sort I seem to choose: capture time ascending order, file name descending order, whatever, yields a different yet inaccurate sort.  The below sort is flagged, by file name ascending order.  This is the bottom of the list where it goes from file brigitte_terry_w6408... to brigitte_terry_film_0039... to brigitte_terry_w2825...  Regardless of the 'film' file, the w2825... files should be displayed above w6408.  Thanks for any help!

  • Date and Time stamp for the archives

    Hi,
    I'm trying to set up a date/time stamp field for a Documaker archive.
    I've added a TIME_STAMP field in my APPIDX.DFD and I populate the field using a DAL script, invoked by a PreTransDAL line in my AFGJOB file. That works fine but, the DAL script being invoked for every transaction, it adds to the processing time.
    I do not need an exact date/time stamp for each transaction in the batch, I could use the same one for all the transactions. That would require the TIME_STAMP global variable to be populated once, at the job level, at the beginning of each batch.
    Any suggestions?
    Thanks.

    Hi Gaetan,
    Try using a BatchBannerBeginScript to populate a GVM with the date/time, and then reference this GVM in your APPIDX.DFD. In this manner the value will be updated at the start of processing for each batch rather than each transaction. Or, consider the possibility of adding the transaction date/time into the extract data and then sourcing from that point. Either should work. In my experience most customers prefer that the archive date/time come from the system of record rather than the time the transaction was archived -- unless of course the customer actually wants to record the time the transaction was archived, in which case the method I've described above should work.
    Enjoy!
    Andy

  • Multiple channel data with different time stamp logging

    I have peaks and valleys from multiple channels with different time stamp but I am not able to log to a single file. Any idea on how to do this?
    Attachments:
    Single Point Peak Valley Log.vi ‏53 KB

    Hi Dennis,
    Sorry for that I have modified the VI.
    Because the peak and valley of every channel will occur at different time and I want to log the peak/valley with the time stamp.
    How can I log them on the same file.
    Attachments:
    Single Point Peak Valley Log_Mod.vi ‏53 KB

  • Shared photo-stream, makes long file names with 42 random characters

    Windows icloud 3.1, in a shared photo-stream, makes file names with 42  random characters long. It didn't do this in iCloud  2. I have installed  iCloud 3.1 on a windows 8.0 and 8.1 machine and two Windows 7 machines.  They all do the same thing.  It used to give me file names like  "IMG_0001.jpg" now it gives me random file names like  "01a9fc3363330464233a142486180f0c1622eb9fca.jpg" all the pictures are  out order.
    Does anyone have fix for this? Does any one else have this  problem? I have posted this before and know one else that uses windows  seams to have this problem exect me. I did call Apple and they did some  research and bumped me up to senior  techs and eventuality Apple told me this is working the way it was  designed to. This is extremely stupid, I need the sequential file names  so the pictures will sort correctly.

    I have never found a solution for this.
    I did find a Work Around. What I do when I receive a folder full of pictures from another ios iPhone user, I copy all the photos as a batch from the PhotoStream folder into a free Windows program called "FastStone Photo Resizer" from www.FastStone.org. This program allows you to resize the photos as a batch to what ever size you wish. In my case I resize them to 2560 x 1440 which fills my 27" monitor and reduces the file size of each picture from 2MB or 3MB down to about 450 KB without degrading the picture as far as what you see on the screen.
    This program will also within the same batch operation, allow you to sort the pictures by "Date Taken" which is the Date and Time the picture was taken. It gets this information from the EXIF data in the jpg file. This program will then rename the files with different numbering format options including date, time, alphanumberic and with just simple numbers starting at what ever number you wish to start with. I can get files that look like this again "IMG_0001.jpg" and have all the pictures in the correct order that they were taken. At this point, I save the pictures directly to a folder on my PC. The cool thing about this is, all the EXIF data is preserved as well. I can process a 100 pictures in less that 60 seconds. I hope this helps. For me, I can now live with this iCloud numbering defect.

Maybe you are looking for