File Path using file adapter

Hi Experts.
I have a file to proxy scenario where I just want to get the file path and dont want to read the whole file using sender file adapter.
Is there any way where i can just get the file path and the file should not get prosessed in XI/PI.
Thanks,
Aditya.

use ASMA with Dynamic conf.
Ref:
Accessing ASMA -
http://help.sap.com/saphelp_nw04/helpdata/en/43/03612cdecc6e76e10000000a422035/frameset.htm
Dynamic Conf vs variable substitution - /people/shabarish.vijayakumar/blog/2009/03/26/dynamic-configuration-vs-variable-substitution--the-ultimate-battle-for-the-file-name
Note:
the get method will help you retrieve the FileName ref. the code in this blog also - Same file name -
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14

Similar Messages

  • Take Source file path in sender adapter from an environment variable .

    Hi,
    Is it possible to take source file path(half file path) dynamically in sender file adapter.
    Please suggest any alternative to this.

    Hi,
    One option, use Dynamic Configuration and set the values in the Mapping.
    By the ways, the File Directory and the Filename are taken runtime in the file adapters after transportation.
    Only if you are using FTP will you need to key in the FTP addess user id password etc.
    Refer -- same way try for File adapter
    Dynamic Configuration of Some Communication Channel Parameters using Message Mapping
    Ps Note : I have personally never tried it to use the Dynamic Configuration for file path. But you can try.
    Thanks
    Swarup

  • How to read MS-Excel file by using file Adapter

    hi friends,
    I have an issue on read Operation by using file Adapter.
    It is necessary to read excel file by using file adapter. But in the native format of file adapter there is no option to read excel type of files.
    So friends, please help me how to solve this problem?
    Thanks in Advance..

    See also this post:
    Read Excel File Using FileAdapter in SOA 11g
    It might help you

  • Same file name using JMS adapter on sender side.

    Hi Friends,
    I got a requirement to capture file name using JMS adapter on the sender side.
    Can some one help me in resolving this issue.
    Regards,
    Jeevan.

    Hi ,
    You can use Dynamic Configuration in mapping.
    Create a UDF with input as file name and copy/paste this code
    DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
    //conf.removeAll();
    DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
    //String filename= conf.get(key);
    conf.put(key, fileName);
    key= null;
    return fileName;
    Thanks.

  • Max length of VI file paths and file names

    Hi,
    Is there a maximum allowed length of VI file paths and file names in LabVIEW? I'm running LV 6.0.2i on NT and is trying to save a VI inside a LLB and LabVIEW crashes each time. I have also tried to copy the VI from the LLB to a temp folder with the Librarian VI, but LabVIEW crashes as well. The total length of the file path is around 260 characters and I strongly suspect the file path length in combination with LLB because when I use a shorter path the problem disappear. If I use a long path without LLB (just regular VIs) a warning appear "Invalid file name" instead of LabVIEW crashing.
    Does anybody know the solution to this problem or must I use shorter filepaths? Perhaps it depends on which platform I am running
    LV on?
    Sincerely,
    Mattias Ericsson

    "Mattias Ericsson" wrote in message
    news:[email protected]..
    > Hi,
    >
    > Is there a maximum allowed length of VI file paths and file names in
    > LabVIEW? I'm running LV 6.0.2i on NT and is trying to save a VI inside
    > a LLB and LabVIEW crashes each time. I have also tried to copy the VI
    > from the LLB to a temp folder with the Librarian VI, but LabVIEW
    > crashes as well. The total length of the file path is around 260
    > characters and I strongly suspect the file path length in combination
    > with LLB because when I use a shorter path the problem disappear. If I
    > use a long path without LLB (just regular VIs) a warning appear
    > "Invalid file name" instead of LabVIEW crashing.
    >
    > Does anybody know the solution to
    this problem or must I use shorter
    > filepaths? Perhaps it depends on which platform I am running LV on?
    I believe windows has a 255 character pathname (file+path) limit. We once
    had that problem because we had a long filename and a longer pathname.
    Moved the directory up a couple levels and problem solved.

  • Getting the File Path of file attached to Document(CV03N)

    Hi,
    We are migrating DOCUMENTS(Document Info Record)data from SAP 3.1i Version to SAP ECC6.0 Version. Here i want to transfer file path of file attached in 3.1i(From DRAW-FILEP) but, i can not able to find complete path of that particular file in FILEP field, it holds only the file name.
    Please help me getting that complete file path.
    JMP

    Hi Maruthi,
    If you want access or see the file name in the document you need to supply three fields.
    FILEP, DTTRG, DAPPL in DRAW table.
    I have used the LSMW with IDOC method and assigned the fields DOCFILE1, DATACARRIER1 and WSAPPLICATION1.
    Thanks,
    Satheesh

  • Hoe to logical file name using "FILE" transcation

    I want to create a logical file name using  "FILE" transaction , i have file path '/xfer/OUT/IDD0230 ' that cureently hard coded in program but i want to avoid hard code .

    You need to go to FILE transction, create new entry.
    You need to specify Physical name i.e value hardcoded in your program
    and corresponding new Logical Path which enduser will be entering.
    In code u ned to decode Logical path to physical path as its actual path.
    Award points if helpful.
    Shital

  • "File file path:to:file is already open" how do i close it?

    I am trying to write a script that pops up a dialog box, asks for text and saves this to a .csv and a .txt This is so i can quickly record what i am doing and the times i am doing it, makes quick notes and various things like that. However it is failing with the message "File file path:to:file is already open" so how do i close the file or get around this. Cheers
    Script Below
    tell me to activate
    display dialog "Enter the log message:" default answer "" buttons {"Cancel", "Ok"} default button "Ok"
    copy the result as list to {the log_message, the button_pressed}
    if the button_pressed is not "Cancel" then
    set curTime to (do shell script "date \"+%H:%M:%S\"")
    set curDate to (do shell script "date \"+%Y%m%d\"")
    set new_foldername to curDate
    set this_folder to (path to current user folder) as text
    set fPath2 to this_folder & "Documents:Logs:Date:" as alias
    --set this_folder to "Macintosh HD:Users:username:" as alias
    tell application "Finder"
    if not (exists folder new_foldername of fPath2) then
    make new folder at fPath2 with properties {name:new_foldername}
    end if
    end tell
    set fPath to (path to current user folder as Unicode text) & "Documents:Logs:Date:" & curDate & ":"
    set fName to curDate & ".csv"
    set myFile to open for access file ((fPath as string) & fName) with write permission
    write curTime & "," & log_message & return to myFile starting at eof
    close access myFile
    set fName2 to curDate & ".txt"
    set myFile to open for access file ((fPath as string) & fName2) with write permission
    write curTime & " " & log_message & return to myFile starting at eof
    close access myFile
    end if

    Hi Richard,
    Run this in the script editor:
    set f to choose file
    close access f
    Navigate to the file you left open. Probably there was an error and the file was left open because it never reached the 'close access' command.
    gl,

  • Upload file without using file upload UI Element

    Hi all.
    I need upload a .txt file without using file upload UI Element because filename is not insert by user. The filename is generated by program. I try to use 'GUI_UPLOAD' and 'WS_UPLOAD' but don't work.
    Many thanks in advance.

    As you correctly pointed out we cannot use the gui_upload and gui_download fm's in webdynpro because they require sap gui and WD Components generally run in a HTML or Portal environment.
    The only option available is File Upload Element

  • How to get the incoming file name using JMS adapter and SOAP adapter

    Hi Everybody,
       In one of my interface i need to get the file name of incoming flat file using JMS adapter at sender side. and then i am using xslt to convert it to IDOC and then posting to  SAP IDOC.
    my incoming filname are in this form price<DateTimestamp>.txt. when i do the tranformation this incoming file name should be part of one element in the IDOC which i am posting.
    EX:
    <IDOC
    <REF>price<DateTimestamp>.txt</REF>
    </IDOC>
    Hope it is clear to everybody. I need your suggestion how i can capture this incoming file name and send it as part of IDOC.
    Thanks
    raj

    If they are passing it in message id or correlation id,
    you can access it using
    <xsl:variable name="dynamic-conf" 
            select="map:get($inputparam, 'DynamicConfiguration')" />
        <xsl:variable name="dynamic-key"  
            select="key:create('http://sap.com/xi/XI/System/JMS', 'DCJMSMessageID/ DCJMSCorrelationID')" />
        <xsl:variable name="dynamic-value"
            select="dyn:get($dynamic-conf, $dynamic-key)" />
    Check this:
    http://help.sap.com/saphelp_nw70/helpdata/en/f4/2d6189f0e27a4894ad517961762db7/content.htm
    Thanks,
    Beena.

  • Flat File to Flat File Scenario using File Adapter

    Hi Experts,
                    In my scenario, requirement is Flat File to Flat file through File Adapter in PI. At sender end, we would need to use Sender File Adapter (NFS) and receiver end we would need to use Receiver File Adapter (FTP). File would be coming as a encrypted format, and the file needs to be sent in encrypted format.
                    Any idea how to proceed with this requirement would be helpful.
    Thanks and Regards
    Soumya

    Hi Soumya,
    You need to choose the FTP in the "transport protocol" option. Then in the FTP connection parameters choose the option Connection Security and assign the value "FTPS for control and Data Connection". Then the "Command Order" will show up below that option and you could leave the default value itself. If you are using Public private key certificates of X.509 then you could choose the option "Use x.509 certificate for client authentication" and assign the values to the "keystore" and "certificate & private key" fields.
    Note: To use the FTP with SSL you need to add the CA certificate to the TrustedCAs keystore view.
    Regards,
    Vishnu.

  • How to get full path of a file uploaded using file control on a jsp ?

    Hi all...
    I have a jsp on which i am using a file element (input type="file") to upload files present on the physical file system.. Thats working fine.. But i want to retrieve the full path of the file uploaded for further computation.
    What are the possible ways which can give me the full path ?? (e.g. "D:\data\text\Output.txt" )
    Thanks all for attending the question..
    Regards
    Prasad

    Some browsers send the full path. Some do not.
    You can not affect this in any way shape or form.
    All you can count on receiving is a filename - no path information.
    So you will have to have some other way for the user to pass along this information.
    If they are uploading to a "remote web site" they could specify a folder to put the uploaded file in.
    You could classify it and put all image files in "images" and all script files in "scripts" etc etc by default, and let the user deal with it in their own HTML.
    Hope this helps,
    evnafets

  • Duplicate File issue using FTP adapter - BizTalk 2010

    Hi We encountered an Issue of picking Duplicate files in BizTalk 2010 from the FTP Location. Need your assistance on this.
    Mainframe sends multiple files a 0 KB file to FTP and BizTalk picks during a particular service window using FTP Adapter. 
    Receive Location has a pipeline component which decodes the MF file(EBCDICRow format). 
    Send Port transmits the file which is decoded in the Receive location. There is no mapping or orchestration involved. 
    When 2 files are placed in FTP Location. BizTalk Transmits the files successfully
    No suspended messages in BizTalk but we see below error in event log. we tried reproduce the issue but no luck. 
    Host Instance running FTP Location is Clustered  
     There was a failure executing the receive pipeline: "XXXX.XX.Pipelines.Receive_XXX_TransactionsMC_passthru, XXX.XX.Pipelines, Version=1.0.0.0, Culture=neutral, PublicKeyToken=c2d1f476d5c2f97d"
    Source: "EbcdicRowDeCode" Receive Port: "XXX.XX.MCSTransactionsMC" URI: "ftp://XXXXXXXX:21/'XXXX'/MCSDT.DEFKOP.R001.D*.T*" Reason: Unable to cast object of type 'Microsoft.BizTalk.Streaming.BasicStreamWrapper' to type 'XXX.BizTalk.Pipeline.Components.Streams.V3.VirtualStream
    MF Puts below Files at FTP Location
    PSNOX.MCSDT.DEFKOP.R001.D150406.T009000
    PSNOX.MCSDT.DEFKOP.R001.D150406.T002100
    BizTalk Picks ( at specified Service window) and Transmits as 
    PSNOX.MCSDT.DEFKOP.R001.D150406.T009000
    PSNOX.MCSDT.DEFKOP.R001.D150406.T009000
    PSNOX.MCSDT.DEFKOP.R001.D150406.T002100
    Regards
    -Sri

    Hi Sri,
    There could be two reason for such a behavior:
    1) Using Non-Clustered Hosts: It is always recommended to use the clustered host for FTP adapter. Because FTP don't allow
    any locking mechanism on the files so in case of non-clustered with multiple host instances you might receive same file multiple times through different host instances.
    2) If the original document is still being written to the FTP server by the host application, the FTP adapter cannot
    delete the document and will retrieve another copy of the document at the next polling interval that is configured for the receive location. This behavior causes document duplication to occur. 
    Workaround could be:
    Configure the host application to write to a temporary folder on the same hard disk as the public FTP folder and to periodically move the contents of the temporary folder
    to the FTP folder. The temporary folder should be on the same hard disk as the public FTP folder to make sure that the move operation is atomic. An atomic operation is an operation that is functionally indivisible. If you write data to the public FTP folder
    by using the BizTalk Server FTP adapter, you can do this by specifying a Temporary Folder property in the FTP Transport Properties dialog box when you configure a send port. If you specify a Temporary Folder property, make sure that this folder is on the same
    physical disk as the public FTP folder.
    Configure the FTP receive location to operate within a service window when the host application is not writing data to the FTP server. You can specify the service window
    when you configure the receive location properties.
    Refer: Known Issues with the FTP
    Adapter
    Rachit
    Please mark as answer or vote as helpful if my reply does

  • Two Files merging using File adapter in Bpel 2.0

    Hi All,
    I have two different files (File 1 and 2) of same format(Two columns each)  , now i want to merge these two files using their data and form a consolidated file (File 3 with four columns).
    Please advise on how to make it possible using file adapter.
    Example:
    File 1 Format: A1 and A2 - are two columns of number and sring type
    File 2 Format : B1 and B2 - are two columns of number and string type
    Consolidated File 3 Format : A1 B1 A2 B2 - forming a single row if A1=B1 and also populating A2 and B2.
    Thanks
    Karthick.

    Hi Karthick,
    I would say read both files completely. Then create a transform and select both messages as an input creating one output. With XSLT it should not be too hard to combine the two inputs. You could loop on one file and then select each row from the other file. That output can be written to file.
    I don't know what triggers the process, but you could either let bpel be triggered by the polling on one file and read the other synchronously. Or read both files synchronously.
    Regards,
    Martien

  • Picking up file sequentially using file Adapter

    Hi Experts,
    I am working on a scenario, where two type of files are coming to the source directory namely "Data File" and "Flag File".
    First, all the data Files will be coming and after that one flag file will be coming containing names of all the data files.
    I am using two seperate Communication channels using "File Adapter"  to pick these files. One for all tha data Files and one for Flag File.
    As per our requirement we need to pick all data files first and then the flag file and process then in the same sequence.
    Is there any solution to do it without BPM.
    Regrads
    Pradeep

    Hi Pradeep,
         I don't think there is any mechanism where in you can direct the sequence of files to be picked ,more over you are using two communication channels .So both will act individually as per the poll interval.For your requirement. BPM Pattern Collect Message suits better as it always waits for Stop message to finish the integration process.In your case stop message can be your  Log file.
    Then all the data files will get processed at a time as soon PE receives the Stop msg (Log file).
    Thanks,
    Ram.

Maybe you are looking for