Take Source file path in sender adapter from an environment variable .

Hi,
Is it possible to take source file path(half file path) dynamically in sender file adapter.
Please suggest any alternative to this.

Hi,
One option, use Dynamic Configuration and set the values in the Mapping.
By the ways, the File Directory and the Filename are taken runtime in the file adapters after transportation.
Only if you are using FTP will you need to key in the FTP addess user id password etc.
Refer -- same way try for File adapter
Dynamic Configuration of Some Communication Channel Parameters using Message Mapping
Ps Note : I have personally never tried it to use the Dynamic Configuration for file path. But you can try.
Thanks
Swarup

Similar Messages

Problem in reading the excel file path in WINDOWs machine from UNIX environ

Hello friends,
My requirement is to read each row of the excel sheet and sent that row to the database. I have implemented it by using jxl and apache poi framework. locally in my WINDOWS machine it is working fine..
But when i deploy the code in UNIX machine. My application runs on a Unix server , trying to read the excel file in WINDOWS environment. I am not able to retrieve the file path. for ex : C:\Documents and Settings\sabbanik\My Documents\KARUNAKAR\excel.xls
I am getting error in this line
workbook = Workbook.getWorkbook(filepath)
Error message : input file not found.
Thanks in advance..

You said: I am getting error in this line workbook = Workbook.getWorkbook(filepath) >
Based on this, I will assume you are trying to use OLE to access information about the Excel file. As mentioned by Andreas, your code will be executing on the server (Unix) and since Excel isn't on the server (and cannot be) an error will result. OLE can only be used in Windows environments (client or server). To access client side OLE calls and content, you need a java bean and Excel installed on the client machine. Oracle provides WebUtil as an option to writing your own Java Bean. To use this, you will need to be running Forms 10.1.2 or newer. Details can be found here along with a demo:
http://www.oracle.com/technetwork/developer-tools/forms/webutil-090641.htm

FSRM [Source File Path] and DFS

Hi,
When i use the [Source File Path] in a notification email it does not show the source file path but instead shows d:\xxxx which is the local drive of the server hosting the destination share.
The users has a lot of problems with file types that are not allowed. But i can't find a good way to show them the file that has been blocked with out showing them the local server drives or shares and this is not a good way.
Any suggestions to what could be done so i can show the users what files have been blocked?

Hi,
I get the reply from FSRM Discussions team.
The source file path in this case does not relate to the copy operation (FSRM has no clue where this is copied from) – rather to the location of the file that caused the problem.
If the path for the file that caused the notification is a shared folder or volume, we can use [Source File Remote Paths] instead of [Source File Path] to insert the path in UNC format (\\Server\Share\).
Best Regards,
Mandy
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Call rfc sender adapter from non-sap systems

Hi,
is ist possible to connect to an rfc sender adapter from non-sap systems? I want to use the the RFC-Connector from http://rfcconnector.com, but in the client connect options there is no way to specify the program id.
Best regards,
Daniel

hi,
you don't need to use RFC type T (with program ID) - you can use whole connection string - just like in the example:
http://www.rfcconnector.com/documentation/examples/client/#functioncall
so just specify: host system number etc.
it should work like that - but let me know as I don't know this RFC connector
Regards,
Michal Krawczyk

Search c:\ drive and return file path for winword.exe and save as variable

Hi all, here is what I'm trying to do;
1. Search C:\ drive for winword.exe
2. take the file path and save it as a variable.
3. Then based on the path value, use the switch statement to run "some command"
Essentially I'm trying to find what the file path for winword.exe is, then run a command to modify the registry. I already have the script that will modify the registry like I want but the problem it, the path is hard coded in the script, I want to
now look for all versions of word and set the right file path so I can make the right registry changes.

This should get you started:
http://ss64.com/ps/get-childitem.html
Don't retire TechNet! -
(Don't give up yet - 13,085+ strong and growing)

Prevent ftp sender adapter from tranfering files from subdirectories

I have a scenario with a ftp sender adapter. In the configuration of the ftp sender adapter I have defined a base directory "/dir" and a file pattern "*". The directory /dir as a subdirectory /dir/subdir. Now the ftp adapter transfers also files from this directory. But I don't want that. Any solution?

Hi,
I am not sure whether it is made so intentionally be SAP. However, if you wish to resolve this issue, you can specify a wild card for file names, such as the file extension (for example, *.txt).
Hope this helps,
Bhanu

How to Get the Source File Path in the Receiver Side

Hi Experts,
Here We are Trying to Do How to Get the Sender Information ( File Name & Path ) on the Receiver Side .
According to the Michal Blog
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
Here we Are Able to Get only the File Name.
But If I Want to get the Total File Path Also means What Should I Do Here ????
Please Let Me Know
Regards
Khanna

Khanna,
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey fkey = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
DynamicConfigurationKey dkey = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","Directory");
String fname = conf.get(fkey);
Sring path = conf.get(dkey);
String final=fname""path;
return ""final"";
Best regards,
raj.

Issues with Receive Adapter receiving a file that has not completed uploading while send multiple files on the Send Adapter

Hello,
I am only a few weeks old into BizTalk so I am new to this application.
The pieces I have for my development environment consists of the following:
FTP Server ---[SFTP Adapter]---> BizTalk 2013 ---[FILE Adapter]---> Internal Network Share Drive
I currently configured a simple PassThru, One way Receive/Send in BizTalk where the Receive Port receives a file via SFTP
Adapter from our FTP server and the Send Port sends the file via the FILE Adapter to our Internal Network share drive.
The setup works great with small files. However, when I receive a large file on the FTP server, the Send Port sends multiple instances of the file on the FTP server because the Receive Adapter sees that the file is there, but not yet
fully uploaded.
Can someone please guide me as to how I can determine when a file is fully uploaded to the FTP server before the Receive Adapter fires?
Thanks,
Mitch

Yap BizTalk does not have control over locking the file during read/write Operation and its the third party which need to take care of this (by rename the file after upload ) .
If the file size is too large I would suggest to bypass the message box as it has performance bottleneck during peak hours
Apart from being repetitive, this is not good advice. There is no indication that the file is too large or will cause any "performance" issues.
The concurrency problem can happen with a file of any size.

How can I change the source file so it is direct from external hard drive?

I am trying to make a movie on imovie of a snowboarding trip that I went on, there is around 80 to 100 gig of mp4 movies that will not fit on my computer that I have stored on my external harddrive. I had the movie half finished then found I could do no more as I had no space left in my mac. I had to delete everything and start again but I'm not doing this until I can find a way of changing the source file so I can take them direct from my external hard drive as to not use up all my computers available space. I have moved imovie to my external hard drive but it still tries to read from a movie file on my mac, how can I change that so it will read from a source file on my external hard drive, is it possible?? Can someone help me??

Hi Bengt, Thanks for your input, much appreciated.
I have a WD 1TIG hard drive and are using usb connection, is it possible to use fire wire with these? I have had trouble with a lot of the videos I Imported, once they downloaded the file in the viewer window showed up blank and when I mouse over them it places a picture of another file in the window and wont drag and drop into the movie window, like their corrupted or something? Had to delete just about all of them and start again. Also is it possible to select a bunch of videos in the viewer window as to change the dates to the correct dates? All I have been able to do is "select all" which is no help.

How can i read only .txt file and skip other files in Mail Sender Adapter ?

Hi Friends ,
 I am working on scenario like , I have to read an mail attachement and send the data to R3.
 It is working fine if only the .txt file comes.
 Some times ,html files also coming along with that .txt files. That time my Mail adapter fails to read the .txt file.
 I am using PayLoadSwap Bean and MessageTransformBean to swap and send the attachment as payload .
 Michal as told to write the Adapter module to skip the files .But i am not ware of the adapter moduel . If any blogs is there for this kind of scenarios please give me the link.
 Otherwise , please tell me how to write adapter module for Mail Sender Adapter?
 How to download the following
 newest patch of XI ADAPTER FRAMEWORK CORE 3.0
from SAP Service Marketplace. Open the file with WinZip and extract the following
SDAs:
aii_af_lib.sda, aii_af_svc.sda
aii_af_cpa_svc.sda
 I have searche in servive market place .But i couldn't find that . Can you please provide me the link to download the above .
 If any other suggestions other than this please let me know.
Regards.,
V.Rangarajan

=P
Dude, netiquette. Messages like "i need this now! Do it!" are really offensive and no one here is being payed to answer anyone's questions. We're here because we like to contribute to the community.
Anyway, in your case, just perform some search on how you could filter the files that are attached to the message. The sample module is just an example, you'll have to implement your own. Tips would be to query the filename of the attachments (or maybe content type) and for the ones which are not text, remove them.
Regards,
Henrique.

FLEX debugger not hitting breakpoints, because Flash sometimes embeds source file paths with wrong letter case?

I was trying to figure out why breakpoints were working fine for source files in some locations but not others. FlashDevelop's debugger (which I believe is actually the FLEXSDK debugger) was successfully connecting, tracing output, and hitting breakpoints in SOME files, but not others.
I downloaded SWFInvestigator from Adobe Labs and checked the embedded debug paths for various source files to see what was going on.
I discovered that files in which no breakpoints could be hit had their paths embedded in all lowercase (e.g. "c:\users\username\desktop\source\myproject" instead of "C:\Users\username\Desktop\source\MyProject").
So I have two questions:
First, is this a Flex debugger issue, or a FlashDevelop plugin issue? Letter case shouldn't matter or interfere with matching file paths in Windows.
Second, what could possibly influence the letter case of embedded paths in a SWF output by Flash Professional (CS6), such that they are sometimes all lowercase and other times maintain the same case from the file system? And why would that affect a debuggers ability to hit breakpoints in Windows 7? I am compiling in multiple ways. Sometimes clicking Publish within Flash. Sometimes the file being published is not even open in Flash, and my JSFL script file is passed to Flash.exe containing embedded file paths to open the document. Usually, everything seems to work fine, no matter where I publish from, regardless of whether the FLA file is open or not. I'm honestly starting to believe that it depends on how the FLA was last opened in Flash Professional, as though it saves some sort of last access path internally and uses that to embed debug information.

I don't think it's the source path in my case, because it's simply the dot ".", although I did check that because it would most likely influence the embedded paths.
In the library path, I use relative paths exclusively, since all my individual project folders exist in the same "source" folder.
Here's how I arrived at the conclusion that something more complex or "stateful" must be occuring:
I publish my files with a one-click application, which does the following
updates version timestamps (static constants) in specific files via regex match
fills in a JSFL template with the FLA filename and writes the JSFL file to disk, then passes the JSFL file path to flash.exe for publication
the JSFL then runs a command, which signals the main application via cross-process communication that the script has finished publishing
That all makes it easy for me to update and publish multiple projects and deploy them, with a single click. Here is the JSFL template I created, which has been drastically simplified since the days where it used to search to see if the file was open in Flash, select the document, and call publish. Now it just uses the publishDocument method to silently publish files without opening them.
var filepath = "FLAFILEPATH"; //template parameter: the URI (beginning with "file:///") of the FLA file to publish
fl.publishDocument( filepath, "PUBLISHPROFILENAME" );
FLfile.runCommandLine("COMPLETECOMMAND");
The C# app replaces the strings in all caps with the actual values. The COMPLETECOMMAND is actually populated with the application's own executable path, along with a "complete" switch, which lauches a 2nd instance, which handles the complete switch by broadcasting a signal over an interprocess channel and then terminates. The main instance captures the signal, triggers a wait handle, and continues with publishing the next file. Here is the core code for it:
private string fillTemplate( string fla_directory, string fla_filename, string publish_profile_name )
    string fileuri = "file:///" + Path.Combine( fla_directory, fla_filename ).Replace( '\\','/' );
    return EmbeddedResources.OpenAndPublish //JSFL template file embedded as string resource
        .Replace( "FLAFILEPATH", HttpUtility.JavaScriptStringEncode( fileuri ) )
        .Replace("COMPLETECOMMAND", HttpUtility.JavaScriptStringEncode( "\"" + Application.ExecutablePath + "\"" + " -publishcomplete" )) //call self with -publishcomplete switch to signal main instance's publishCompleteSignal
        .Replace("PUBLISHPROFILENAME", HttpUtility.JavaScriptStringEncode( publish_profile_name ) );
private static readonly string FLASH_PATH = @"C:\Program Files (x86)\Adobe\Adobe Flash CS6\Flash.exe";
public void publish( string fla_directory, string fla_filename, string publish_profile_name )
    Program.publishCompleteSignal.Reset();
    string template = fillTemplate( fla_directory, fla_filename, publish_profile_name );
    string curdir = Environment.CurrentDirectory;
    string tempJSFLfilepath = Path.Combine( curdir, "temp_script.jsfl" );
    File.WriteAllText( tempJSFLfilepath, template );
    Process p = Process.Start( FLASH_PATH, tempJSFLfilepath );
    Program.publishCompleteSignal.WaitOne( 30000 ); //timeout after 30 seconds
Here's where it gets interesting. The FLAFILEPATH has ALWAYS been passed in as all lower case, yet this publication method has worked 99% of the time for hundreds of publish operations every day. This applies to both the publication of the first SWC, which is referenced by the second published SWF (both were being published with lowercase paths), yet the paths for the main SWF were remaining in lowercase, while those in the referenced SWC were maintaining the correct case from the file system.
So there may be any number of things going on here. SWCs may be published differently than SWFs, such that SWCs always have the correct letter case for debug source files, regardless of how the source FLA project was opened. Ensuring the path passed to publishDocument uses the right case definitely fixes the problem, but it doesn't explain why it usually worked, despite having always been passing a lowercase string. The only variable I can think of in all of this is Windows itself or Flash, such as whether the document was open in Flash at the time the silent JSLF publishDocument command ran, and how that FLA was last opened (via shortcut, via "recent documents" in Flash, via recent documents in Windows. It has to be something, even if it's something as obscure as how the folder path was last accessed in windows, although I strongly suspect it's just how (in terms of path case) the FLA was last opened in Flash.
In any case, I'm happy that passing the right case to JSLF's publishDocument command fixes the problem, so I'm not going to spend any more time trying to figure out how opening the FLA in various ways could affect the embedded debug paths. The only thing that should be done is to address how paths with the wrong case are handled when they do get embedded that way for whatever reason. Perhaps the flex debugger should be updated to use case-insensitive matches in case-insensitive file systems, unless, perhaps, this is a FlashDevelop debugger issue after all.

Accesing additional files in the sender adapter

Hi,
I'd like to use this option in the sender file adapter: http://help.sap.com/saphelp_nwpi71/helpdata/en/44/692ab8a4b633eae10000000a1553f6/frameset.htm
--> "In the sender file adapter, you can specify additional files to be included in the XI message as attachments" ... "Additional files are transported unchanged without conversion options"
After testing I'm getting two files in the soap message, which is what I wanted. But how can I get the content of the second file (not the main one).
For example, in a custom module in the file adapter I can get the main payload as this:
public ModuleData process(ModuleContext moduleContext, ModuleData inputModuleData)
 throws ModuleException {
Message msg = (Message) inputModuleData.getPrincipalData();
I guess that to get the second file it could be something like:
inputModuleData.getSupplementalData("?");
but don't really know what to insert there as a parameter.
Basically I would need to find out a way to access the content of that second file: it could be in a custom module, it could be in a graphical or java mapping...
Thanks!
Edited by: Jorge Lopez on Mar 17, 2009 11:09 AM

Finally I could access that attachment in a Java mapping using this code:
private String getAttachment(TransformationInput in){
 InputAttachments inpAttach = in.getInputAttachments();
 Collection<String> collIDs = inpAttach.getAllContentIds(true);
 Object[] arrayObj = collIDs.toArray();
 getTrace().addInfo("Number of attachments: " + arrayObj.length);
 String idAttachment = (String) arrayObj[0];
 return new String(inpAttach.getAttachment(idAttachment).getContent());
and so getting the attachment in a string.
You also have to set on the flag "Read Attachments" in the Operation Mapping (PI 7.1, old Interface Mapping), so that the ABAP side passes the attachment to the Java runtime.
I'm not sure if it's possible to access the attachment in the sender adapter in a custom module
Edited by: Jorge Lopez on Mar 18, 2009 4:06 PM

Reading File Path of local system from Server

Hi All,
I need a small help. I am uploading two csv files and reading them through a servlet. My application is working fine in localystem. but when the same code is uploaded it is not working. (I am using Tomcat Server).
It is giving "File not found exception". It is unable to read the local system csv file.
I dont want to save that file in server,but i want to read the file contents.
please help me how i can achieve this.
I apologize for my poor English.
Thanks in Advance.
Regards,
Devi.

When uploading, do you send the actual file or only the file path? Only the last will work when the server and the client are located at the same machine. And that's a common mistake of beginners while implementing file upload.

SSIS - Loop through files from a file path based on the value in the variable

Experts,
I have a requirement where I'll be loading multiple files in to a SQL server table and archive the files when loaded. However, the challenge is , the file path should be dynamic based on the value of a variable (say, @ProductName).
For example: If I am running the package for variable @ProductName="Product", the file path would be "\\....\Src\Product", in that case the ForEachLoop will loop through all the files in that folder, load them to the table and Archive
the files to the "\\....\Src\Product\Archive" folder.
Similarly, if the @ProductName="Product_NCP", the foreachloop container should loop through files in the "\\....\Src\Product_NCP" folder, load them to the table and archive them to the ""\\....\Src\Product_NCP\Archive"
folder.
Any suggestions? I should be able to run the package manually just by passing the "@Product" value, create Archive folder if it doesn't exist, load the data and archive the files.

Yes
1. Have a variable inside SSIS to get folder path. Set path based on your rule using an expression
like
(@[User::ProductName] == "Product" ? "\\....\Src\Product" : (@[User::ProductName] == "Product_NCP" ? \\....\Src\Product_NCP:..))
similary archive
(@[User::ProductName] == "Product" ? "\\....\Src\Product\Archive" : (@[User::ProductName] == "Product_NCP" ? "\\....\Src\Product_NCP\Archive" :..))
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

How to create dynamic source file path for lumira?

i have source file for lumira visualization on D:\lumira\SourceFiles\sample.xlsx;
also .lums file in D:\lumira\demo.lums
But when i use the same Lumira folder in different system i have to again create connection for the datasource for fetching the data.So please suggest me how can i use this file so that i don't need to create a new connection again and i should get the updated data i.e. the data should change according to the change in the datasource file.

Hi,
this isn't possible.
you need to go the Connections window in Lumira home page, and repoint the connection to the new location
regards,
H

Take Source file path in sender adapter from an environment variable .

Similar Messages

Maybe you are looking for