File Sharing within the Linux filesystem. How to do?

I folks,
i need a java solution to implement a file sharing at the linux filesystem.
Two java applications which are running in the Linux world need the access to one file at the linux filesystem. How can i do this with java???
Any suggestions?

Read/Write access required from both apps I assume? Do both apps run in the same account that owns the file(s)? Is it possible or feasable to put the file information into a database running on Linux instead?
Norman

Similar Messages

I have CS 6 installed on a Win 7 OS machine. I can not connect to the internet to get updates from within the program. How do I fix this?

I have CS 6 installed on a Win 7 OS machine. I can not connect to the internet to get updates from within the program. How do I fix this?

IP routing doesn't work the way many folks might initially think it does; functional IP routing requires manual configuration and the establishment of static routes and default routes specific to the local network configurations, and it's very easy to get it wrong, or to get the default route swapped. Multiple NIC boxes don't magically work, either. (Been there, done that, wondered what happened to my network when the paths got reordered or my route settings were messed up, etc.)
Routing configuration errors can be quite subtle, too. (Again, voice of experience. Ever had a thousand-seat office LAN accidentally routing through your desktop? As the, um, unnamed guilty party discovered, getting into that configuration was subtle. Seeing the performance crater on the fellow's box and on the LAN was obvious.)
Knowing how IP routing works is a prerequisite to getting this configuration to work; there's manual configuration required. Clearly something has gone weird here.
What to do? Read up on IP routing. I'll again suggest the threads and the manual mentioned earlier.
And in general, I prefer to avoid using my comparatively expensive Mac boxes as sub-optimal IP routers or as firewall boxes. General-purpose operating systems and generic x86 boxes are going to be inherently poor IP routers. Dedicated routers (or embedded or surplus x86 boxes with routing software loaded) offload the Mac boxes here, and are also typically easier to configure manage. And "real" IP routers can have hardware specific to efficiently routing packets. Use of an outboard firewall or firewall-router box also greatly simplifies gateway routing, too; it's a configuration that many folks and many businesses tend to use.

Kobo APP download Docs, PDF's Kobo said to convert the PDF using Adobe Digital Editions, then I'd be able to upload to the Kobe APP via iTunes. Where is File Sharing under the Apps tab located?

I've uploaded my PDF to Adobe Digital Editions, but can't find where on iTunes to select file sharing under the Apps Tab... as specified in the instructions in the Kobo APP for the iPhone... and a rep from Kobo told me it was possible.

For future questions, this forum is for questions from those managing sites on iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with an issue if you ask in the general iTunes forums.
Regards.

I want to classify my pictures within the album. How do I do it.

I want to classify my pictures within the album. How do I do it.

Alpha within the album in the ''photos'' section
Claude

HT202213 i cant find the Home Sharing on the newest iTunes how can i find it?

i cant find the Home Sharing on the newest iTunes how can i find it?

If you mean to turn it on, Advanced menu -> Turn On Home Sharing.
http://www.apple.com/support/homesharing/
Regards.

I have a MAC running Maverick. MP3 sounds will not play in Safari or FireFox, but will play if you download the file locally to the Desktop. How to resolve this?

I have a MAC running Maverick. MP3 sounds will not play in Safari or FireFox, but will play if you download the file locally to the Desktop. How to resolve this?

You probably have an internet plugin installed that is preventing the MP3s from playing. I just checked a site with an MP3, and it played, rather than downloaded.
The internet plugin folders are at:
/Library/Internet Plug-ins and
~/Library/Internet Plug-ins
(~/Library is hidden by default. Let me know if you don't know how to access it.)
My internet plugins were all in /Library; there were none in ~/Library.
Try moving these folders to the desktop (don't delete them), restarting, and then seeing if the MP3s play.
They it will be trial and error to see which plugin is responsible.

File sharing and the "current version" feature

hi,
i see that there is a "current version" feature while using the file sharing features in "creative cloud".
How can I use this feature ?
ie. change or add versions to show up in the same area above to be used for communication with customers/clients etc.
-Where can i go to offer suggestions to this part of CC ?
-I would really love to see greater features for commenting, file sharing, and basically overall colaboration.
Any kind assistance in this would be greatly appreciated,
Respectfull,
RC.

It looks like you already have file syncing working from the Creative Cloud application. If not you can sign up here http://blogs.adobe.com/creativecloud/file-and-typekit-font-sync-rolling-out/.
Then all you need to do is open a file in your Creative Cloud Files folder, make an edit and save the file with the same name. A new version will appear.

Where is the iPad App file sharing in the new itunes?

I exported a file from ArtRage App. One is supposed to go to iPad Tab, then Apps Section, and scroll to the bottom and find the file. But I just updated to the new iTunes and I don't see a way get the file anywhere within it. What should I do to get the file in the New itunes? the only help information I can find is from the last version. ...I should not have updated...
Thank you.

With iTunes 11 you can enable the left-hand sidebar via option-command-S on a Mac, control-S on a PC. Then select the iPad on that left-hand sidebar, and on the right-hand side of iTunes select the Apps tab and scroll down it, and you should see the file sharing section - select that app on the left-hand side of that section

Need to reference file name within the XML Output

Not sure if this is possible, as I'm new to the livecycle/XML world. But I need to be able to reference a file within the XML output from the PDF.
The Scenario is that a pdf form of a business card will be issued to 50 franchisees for them to type in their names and mobiles, click submit and the XML file to be sent to myself, and be imported in to InDesign populating their data ready for printing. Up to here I have it working perfectly.
However as each franchisee have a combination of up to 5 logos to place in the bottom corner to save having to have various templates with different combinations of logos and having to ensure the correct templates are used. I intend to reference each companies combination as an EPS and make the reference within the xml out and have it import directly in with the other data. I can type the code directly within the xml but I would like to have the form reference it directly in the xml output. Is this possible or am expecting to much of livecycle? Any help/advice greatly appreciated.
David

Hi MadhavaGanji,
I have post how to validate the file name, header row against definition table which stored the file name and column definition.
Take a look and see if this is helpful.
http://sqlage.blogspot.com/2013/11/ssis-validate-file-header-against.html
http://sqlage.blogspot.com/

File Sharing With the BEFW11S4 in Vista....

I have two computer connect to my router on a network, Both computers are running Windows Vista. I am able to see each computer on the network map in the network and sharing center. But when I go to the network folder the computers do not apper at all... I made sure they both was are in the same workgroup unfortunately the are still not visable to each other better less able to read or change any files on each indiviual machines. Does anyone know how I can make this computers visable to one another. I really wanna stop running up and downstairs to do thinks on each machine when I can share between computers and not have to copy stuff to a memory card or backup harddrive just to get the information upstairs.

Go to network and sharing centre and turn on network discovery and file sharing on both computers.
Greetings from Northern Ontario, Canada

Airdrop file sharing - what about ethernet? How strange.

Overall I like Lion, but sometimes I wonder what Apple is thinking. You have a file sharing app for your LAN, but then any wired computer is excluded? You have Macs on the same LAN, why not allow Airdrop to work over the wired connection?
I suppose you would have to change the name. Seems silly to have to leave the wireless receiver on with an ethernet connected Mac just to do Airdrop.
But really, other than that oddity, I like Lion.

Hi-
A suggestion as a possible simpler alternative-
The standard method of file sharing is structured so as to protect your system and your privacy by limiting the access and privileges of remote users. However in your particular situation, there is only one person - yourself- who already owns and controls both Macs, and so there is no privacy/security issue raised by granting full control to yourself when logged in remotely.
You might therefore therefore try it this way:
Enable File Sharing on both Macs. You shouldn't need to designate particular additional folders.
From the iMac: when you connect remotely to the MBP, enter the username and password of the user account that is on the MBP, not your current iMac username and password.
You should then be effectively logged in as the MBP user, not the iMac user. You should be able to navigate to the place on the MBP where you want to save things, presumably within the Home folder of the logged-in MBP account. If the MBP account is an admin account, you could navigate to the Shared folder as well. The files that you save should end up being owned by the MBP user account, and therefore should remain editable once you are physically back at the MBP.
Likewise if you want to share files that are on the iMac, then when you are sitting at the MBP, connect by entering the username and password of the user account on the iMac.

Unable to open CS3 Files from within the application

Good Afternoon
I work as IT Support for company looking after 10 ADOBE Creative Suite 3 end-users.
One of my colleagues is unable to open Illustrator or Photoshop files from within their respective applications, but she is able to open them from outside ok.
I have reinstalled ADOBE CS3 and this appeared to resolve the issue, only for it to return again a day later.
She has no other applications or processes running during her attempt to open a file from within CS3.
She will click on Open and the 'Open File' window will flash up for a split second, then the whole application will be frozen. It is as if the 'Open File' window is there, but isnt there because we cant click on it, but the application thinks it is displaying and so she can not click on anything else. The only way to close the application is to end the process under Task Manager.
While I am sitting here tearing what little amount of hair I have on my head, can anyone point me in the right direction?
Is this a Windows problem or an ADOBE problem do you think?
I look forward to any replies.
Thank you

Hi Bob
Ok...
Opened illustrator but was unable to open the 'Open File' window.
Changed the screen resolution, it suddenly worked!
Changed the screen resolution back to as it was before, it also worked.
What could cause this do you think?
By simply changing the screen resolution and back again, the 'Open File' window displayed itself.
Very bizarre!

I have photos that are rotated within a photo stream created from a project even though the photo displays properly within the project. How can I get the photos to have the proper rotation within the photo stream?

I have a photo stream that was created from a subset of photo from a rather large Aperature project. Some of the photos show up rotated within the photo stream but are not rotated within the project. Why is this happening and how do I fix the rotation within the photo stream? I do have the latest version of Aperature and have all of the necessary updates applied to my devices used to view the photo stream. The photos do show up rotated within the photo stream segment of Aperature, so I am sure it is not an issue with the output device (iPad and Apple TV). I do know that I cannot edit photos within a photo stream, but no amount of editing within the project allows the photos to be properly rotated within the photo stream. All help would be greatly appreciated.

That will work, but it is the long way 'round.
As Frank noted, Book Albums are just specialized Albums. Albums can show any Image in your Library, regardless of where the Album is located on the Library Inspector, and regardless of which Project contains the Image. You can put your Albums anywhere (in a Folder called "Books" for example). You can put Images from anywhere in your Library in any Album.
The easy way 'round:
- Make a new Book Album
- Select Images you may want to put in your Book. Flag them.
- Select some more. Flag them.
- Go to the "Flagged" container (listed near the top of the Library Inspector), select all, and drag-and-drop them to your Book Album.
- Repeat as needed, or just drag-and-drop directly into the Book Album.
Note that you can remove any Image from any Album (including Books) by selecting and hitting the "{Delete}" key. This _does not remove the Image from the Project that contains it, or from the Library.
Note, too, that once the Images are in your Book Album, you then put them in the Book you are creating for publication. The Book Album contains the superset of Images with which you populate the Book itself. The Book Album also holds the Book.
A good (imho ) introduction to the parts of Aperture can be found in this short guide I wrote.
The User Manual is helpful. Here is
the chapter on making Books.
From that chapter, here is
the section detailing how to create and populate a Book Album.

File sharing in the File server preference pane

System preferences to File Server to File sharing. When I choose a share point folder and want to change permissions, I click the radio button to restrict access to certain users and save. When I re-enter the the folder it defaults back to let everybody have access. If I try to delete the folder it won't delete. When I create a new folder by re-choosing the folder, I get <folder Name>1 and then I cannot delete it. Is there a plist in preferences I can delete to clear this problem?

Hello Peter,
Thanks for your answer.
There must be something wrong in the different steps I follow.
Firts I set Time machine on the server for each user, shoosing the Volume "SmartStor" (a network volume attached on the Mac Mini server) it creates a "Shared items" folder with a "Backups" folder in.
In Server Admin tools I can see in the AFP services the share point /Backups
In Workgroup Manager I set the Time Machine's preferences for the different computers and computers' group with the path afp://myserver.local/Backups/
At least on my client's computer I can shoose the volume "Backups" "on my server".
And it doesn't work... even with all the logins and password, User's, Dir Admin and Server Admin.
With User's and Dir Admin it runs quickly and tells "the volume is not reachable on account of wrong user's name or password"
With Server Admin login and password it runs indefinitly, nothing occurs ...
Is there something to do in terminal ?
Well I tried to find explanations on the web but I found nothing for the moment... The informations are to set a network volume in Terminal in place of the default one...
'Hope to find soon, I can't stand that something runs for every one but not with me...

File sharing on the iPad in iTunes

From what I've read, a lot of people are having problems with the file sharing in iTunes for the iPad (under the apps tab), the problem is pervasive and goes back to last year. I'm trying to back up all the files in the apps that support file sharing (Pages and Good Reader primarily). Occasionally, one or two apps show up for a few seconds, long enough for me to use the "save to" function. Normally, they show up as blank. Anyone had any luck getting this to work? I think its an iTunes bug. I've tried closing iTunes, resyncing the iPad, disconnecting the iPad and reconnecting, even connecting the iPad from a powered down state. None of it works. I'm connecting to a Windows 7 computer (where all my music and movies are stored), but am considering trying to sync with my Macbook Pro, though I'm not sure what this will do (same iTunes account).
Using iTunes 10.4.1.10 (latest version as of 9/5/11)
iPad 1, iOS version 4.3.5 (again, latest version)

tangobravozab wrote:
Occasionally, one or two apps show up for a few seconds, long enough for me to use the "save to" function. Normally, they show up as blank.
Do you mean that the files show up and not the apps? You should see the apps in the window under the File Sharing section of the apps tab in iTunes. You use the "save to" function with the files themselves. This is the one function that still works fine for me as long as the files are already in the documents window in iTunes.
I have been using Pages for months on the iPad and my Mac, and it has been so long since I have been able to move a file from the iPad to iTunes using the "send to iTunes" option from the share and print section of the tools in Pages that I have given up. This worked flawlessly for me prior to the iOS 4.3.5 update and the previous iTunes and Pages '09 for Mac updates.
This has really soured me on the most recent iTunes update and I will continue to put it off as long as I can. If software updates start causing problems, what's the use in downloading them?
I hope you find a solution - I know I am stumped on my end.

File Sharing within the Linux filesystem. How to do?

Similar Messages

Maybe you are looking for