File Storage Issues

I recently assembled a project with Studio that combined live action shots mixed with screen grabs imported using the Ishowu (shiny white box) program. These grabs are now scattered all over my desktop and I need to do a little cleanup. Unfortunately, when I put them into new folders, I get messages in my project that the 'media has gone offline'. I understand what I must do for future projects, however, I want to clean up my desktop without destroying this project in Studio. Does anybody have any advice on how to do this? Thanks much.

Simply open up the FCP HELP (located on the menu bar) and have a bit of read on that subject - i.e. media has gone offline.
In all likelihood you'll come across the concept of "reconnecting media" which is what you want to do.
While you are poking around in there (the FCP Help PDFs) spend some time reading on project organization and work flow. You'll benefit greatly from developing a stronger conceptual understanding of how the program works. The manuals are well written and quite informative - some of the best I've run across.
In addition to that, our own Shane Ross (a forum member) has an instructional DVD for sale on getting organized in FCP that you may find useful. I believe a link to it can be found over in the Creative Cow website.
Good luck,
x

Similar Messages

File storage issue

Cannot store a Numbers file into an iDisk folder, although I can store a Pages file into a folder. How to overcome this issue?
Thanks

It would be more efficient to ask in the forum dedicated to iWork for iPad.
Here just a few helpers own an ipad.
Yvan KOENIG (VALLAURIS, France) vendredi 25 mars 2011 20:49:21

Oracle 10g RAC using ASM - Storage Issue

I’ve an issue related to Oracle 10g RAC.
I’ve 2 node cluster each being Dell 2850 Server with RHEL 4.0
I’ve EMC CX300 SAN storage with following partitions
/orasoft     10 Gb          OCFS2 File system
/oracrs          2 Gb          OCFS2 File system
/orabackup      100 Gb          OCFS2 File system
The datafiles are on ASM which is not directly visible in OS.
I’ve common Oracle Home installed in /orasoft/db_1 which is shared by both nodes in cluster.
I’ve faced an issue recently related to EMC storage.
The /orasoft partition displays 1.4 Gb space available using df command.
With both nodes sharing the common Oracle Home (/orasoft/db_1), when ever I try to touch a file I get an error as No Space left on device. I’m unable to start any service with the same reason.
Is this setup correct ??
Can anyone help me with this storage issue ??

Need a clarification here...what do you mean by "Storage System"...do you mean a server/node or the SAN storage system. If you are referring to a server/node's local storage, then it would NOT be possible for use by RAC, since the disk space has to be shared among the nodes.
Here is what you can do:
- Create two partitions/devices (for example Disk_1 and Disk_2) in the SAN storage
- Create a ASM disk group which would mirror Disk_1 to Disk_2.
Again, please note that the partitions have to be visible and be accessible read/write from both the nodes/servers.
HTH
Thanks
Chandra Pabba

Oracle 10g RAC+ASM - Storage Issue

I’ve an issue related to Oracle 10g RAC.
I’ve 2 node cluster each being Dell 2850 Server with RHEL 4.0
I’ve EMC CX300 SAN storage with following partitions
/orasoft     10 Gb          OCFS2 File system
/oracrs          2 Gb          OCFS2 File system
/orabackup      100 Gb          OCFS2 File system
The datafiles are on ASM which is not directly visible in OS.
I’ve common Oracle Home installed in /orasoft/db_1 which is shared by both nodes in cluster.
I’ve faced an issue recently related to EMC storage.
The /orasoft partition displays 1.4 Gb space available using df command.
With both nodes sharing the common Oracle Home (/orasoft/db_1), when ever I try to touch a file I get an error as No Space left on device. I’m unable to start any service with the same reason.
Is this setup correct ??
Can anyone help me with this storage issue ??

Hi,
If you create a new diskgroup you may be to add the same diskgroup to parameter file or spfile and which will be needing down time.
sugestion: Instead of creating new diskgroup you should to add disk to existing group.if you add asm disk to existing group your all problem will be solved and Oracle itself will be managing all.And than i am sure no need to add entry in the parameter or spfile like +db_create_file_dest=.....
regards,
Sher khan

My home network has an Airport Extreme w/Time Capsule as the base and then an Airport Express and a second Airport Extreme to reach different areas of the house. Is there a way to use the second Airport Extreme for file storage on this network?

My home network has an Airport Extreme w/Time Capsule as the base and then an Airport Express and a second Airport Extreme to reach different areas of the house. Is there a way to use the second Airport Extreme for file storage on this network? Network is administered through an iMac running OS X Yosemite 10.10.2. Ideally, would like for the second Airport Extreme hard drive to appear on the list of devices in the Finder window.

Ok.. gottcha
The problem is network wise.. Yosemite is about equal to tin cans and string.. pathetic.
Here is my usual set of instructions to get anything working on Yosemite.
The best way to fix problems is a full factory reset of all the AE in the network.
Factory reset universal
Power off the AE.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the AE to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
Then redo the setup from the computer with Yosemite.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg AEgen5 and AEwifi for basestation and wireless respectively.
Even better if the issue is more wireless use AE24ghz and AE5ghz with fixed channels as this also seems to help stop the nonsense.
2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. Ensure the AE always takes the same IP address.. this is not a problem for AE which is router.. it is a problem for AE which is bridged.. you will need to set static IP in the main router by dhcp reservations or use static IP in the AE which is tricky.
4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric..
5. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
6. Now mount the disk of the second AE in finder... manually.
Use Go, Connect to Server and type in the AE ip address.
SMB://10.0.1.2
Where you will replace that address with the actual address. The network resource should be discovered and then it will request the password.. type that in and make sure you tick to save it in your keychain.
There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
Do as much as you want of the above... not all of it is necessary.. only if you want it reliable.. or as reliable as Yosemite in its current incarnation can manage.
The most important thing is point 6.. mount the disk using direct IP address and not names.. dns in Yosemite is fatally flawed.
See http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/

What's the FASTEST file storage option ?

Hi all,
Im building an application in Java where indexing and storing of data is a major area of the app. It should be able to store the data as well as retrieve them rapidly as well as the files should be small in size.
Knowing Java's popularity with XML, I've chosen that as one candidate, but the problem is Im not too sure how the above 2 criteria will match with XML.
1) Is XML fast enuf considering retrieval of data ?
2) And how about the[b] storage sizes ?
Or should I scrap XML and build my own version file structure such as a B-tree ?
How difficult would that be considering limited development time ?
thanx in advance ....

Anyway to deal with this post piece by piece.
I agree with you that database infact rules out other
options when it comes to speed and storage. Im not in
anyway trying to abuse XML as a storage mechanism. If
I had the freedom to use a database, I know I wudnt
even hav posted this question, cos database wins
hands down in ease of programmin, maintain, store and
rapid response.
Okay first of all my post was not a personal attack against you. There are plenty of people who abuse or ty to abuse XML as a storage mechanism with extremely unhappy results. I want to make that point clear not just to you but to any future readers of this thread so that if they are considering such a course of action they should come back to reality.
It wud be insane to ask the client to
to install a DBMS jus to make sure the P2P app wud
run. As for the details about the solution, it is a
P2P app, but not to share content as such traditional
ones. Its supposed to help ppl arrive at better
seacrh results on a Web Search Engine.Well this was dealt with previously. In short using JDBC does NOT imply a full blown database server. It could be a standalone database like Access or you could write your own driver that accesses a proprietary file directly or you could use a plain text driver.
The point is that if you use JDBC you decouple your application from the storage. This is the important point. Because it means you can switch the storage mechanism as best fits you later without having to rewrite gobs of code.
>
As for the requiremtns, I need a storage mechanism
sm to store the rankings a user might have given
indivuidually per page or website. I need to store
them as well as access them anytime I want and share
them with the peers. Not only rankings I need to
store other deatils like the search string, the
datetime of the query etc.All the more reason to look at a database of some sort... an embedded database would be fine.
>
I will let you know more of the requiremtns as soon
on as I advance onto it. Right now Im not
concentratin on the storage part of it. ( Jus
thinking of goin ahead with XML ) and rather
implementing the P2P communication area. I was jus
doing some research on what would be the best storage
option for dealing with the app's "data". I read
on a book that B-Tress and such data structures can
actually be implemented on file storage thus giving
better performance. And also I was looking for
material ( white papers and such ) discussing the
various issues of each storage option available
currently which will stand as proof for the final
solution I am gonna take.
Okay here is the problem with all this. How do you think databases implement indexes?
Hint: while it is all in the end vednor specific the answer is some sort of tree structure.
So again back to the point if you want to write your own tree structure go right ahead... I think it's pointless but go right ahead. What you should do though is write it so that your application accesses this structure through JDBC so that later when you decide that re-inventing the wheel was not such a hot idea you can change the storage implementation without destroying your application.

Can I use one 2tb external hard drive for time capsule and file storage?

I would like to use time capsule, but also keep the hard drive on my desktop for file storage. Can I do this?

Apple advises against doing that.
Any data stored on the disk that Time Machine is backing up to can not be backed up.
Plus the data outside of the Time Machine backup database cause problems when Time Machine starts cleaned up old backups to recover space for new backups.
For these reason it is advised that the Time Capsule disk be used for one or the other but not both.
Allan

.tdm file storage vi's slow editing vi's

I am developing software using Labview 8.5 and have recently added some file storage vi's for the .tdm format for use in DIAdem 10.2. Upon using the open storage, set file properties, write channel group, write channel, and close storage vi's, the editing has become extremely slow - for any operation I try to perform there is a 10-15seconds delay before it occurs. If I remove the .tdm vi's from my diagram then the editing goes back to normal and changes/operations occur almost instantaneously as expected. My project is not large as far as I am concerned (Front panel - 121k, block diagram=1538k, code=0.2k, data=957k, total=2617k, total vi size on disk=389k)
I saw a similar post to the .tdm storage vi's causing this to occur back in 2005 and was supposed to have been on the fix list but it does not appear that it has 3 years later. I am sure many others are using these vi's so not sure what I may have done differently to cause the editing to slow down so much.
Anyone with ideas and fix would be greatly appreciated as I cannot afford to sit around 10-15 seconds for every step of my developement.

Yes, sometimes Storage VIs are slow. But They are Express VIs, supplying the easy configuration for users. If you feel they are too slow, I suggest that you can use TDMS files instead.

ICloud storage issue; Restoring iPhone calendar from iMac after accidental iCloud deletion

I set up iCloud to back up calendars and contacts and for find my phone. Initially, it seemed to work alright. Then I got messages on iPhone that there wasn't enough iCloud storage, even though the storage tab showed that I had used none of my iCloud storage at all. So I turned off iCloud/contacts. In iTunes I switched back from iCloud backup to backup from my iMac.
Later I got the same message about not enough room in iCloud even though only calendars involved. So I truned off iCloud/calendar on my iPhone and was given the choice of keeping the calendars from the iCloud or deleting them (a foolish choice without a failsafe!!!). I clumsily and mistakenly hit delete. My calendars have most recently been synced with my new iMac and appear on the iMac and should also be in TM. But right now there is no data in my iPhone calendar.
When i go to calendars within the iiphone calendar there is a check next to Calender under "from MY Mac" and no reference to iCloud. (There are no separate calendars for me, my wife, and joint. Does this mean somehow these calendars have been merged because of iCloud?)
I don't want to do another sync until I can make sure that the sync with the iMac will resotre the calendar(s) to the iPnone. How do I do this?
Do I have to do anything on the iMac before I try a sync?
How do I avoid these problems in the future? The only thing I really would like from iCloud is "find my phone". How do I keep that capability without backing up or su=yncing otherwise anything through iCloud?
Is iCloud still Beta?

Apple walked me through this and helped me revert to backing up on my iMac, using iCloud only for find my iPhone and iMac. The process, however, is not straightforward and what the respective mac and iPhone support people (yes, they have that kind of specialization) led me through was clearer, if somewhat convoluted, than any instructions on Apple's support or community pages.
Since my main concern was not losing my calendar and contacts information, the key was saving that, via export, to my desktop. Sorry I didn't write down all the other steps - but I see that as Apple's job. Back in the days of the IIC, Apple's manual was a model of clarity and completeness at the same time.
Bottom line is while my immediate concerns were resolved, the underlying iCloud storage issue was not. On my iPhone, I was being told that my attempts to backup to the iCloud failed because I didn't have enough storage, even though I determined almost none of my alloted space was used. This issue is not helped by the multiplicity of settings relating to iCloud, or the interfaces (such as the iCloud on the iMac through Mavericks) which present a screen of icons without additional information.
For my purposes, iCloud remains Beta.

PS CS3, Camera Raw 4.6 Update and Nikon D810 NEF File Reading Issue

Currently Have Photoshop CS3 & Adobe Bridge CS3 2.1.1.9.
According to Adobe, Camera Raw 4.6 supports Nikon D810 NEF files. I have downloaded Camera Raw 4.6 Update. When
I try to open Nikon D810 NEF files, I get Photoshop CS3 error that says
"cannot complete request your because it is not the right kind of
document. These NEF files wont open in Adobe Bridge at all. What am I doing wrong?

Hey,
Before I purchased, let me get your thoughts on another option that just occurred to me which involves:
1)Editing my D810 NEF files in LR 5.6, which I have, then exporting/saving the edited files as JPEGs.
2) Doing any additional editing, as necessary (i.e. that might require layering or selections..etc) , with the JPEGs with Bridge or PS CS3.
This method wont involve any additional software purchase now.. right? Am I missing anything. here? Since my final output to my customers are JPEGs any way, wont this work? Will I be at any disadvantage. Am I missing anything. here?
From: ssprengel <[email protected]>
To: charles cash <[email protected]>
Sent: Monday, October 6, 2014 9:49 AM
Subject: PS CS3, Camera Raw 4.6 Update and Nikon D810 NEF File Reading Issue
PS CS3, Camera Raw 4.6 Update and Nikon D810 NEF File Reading Issue created by ssprengel in Adobe Camera Raw - View the full discussion
You can buy it from here:
http://creative.adobe.com/plans
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6795004#6795004
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Adobe Camera Raw by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Azure File Storage - Creating a directory at the root level using REST

I have a Xamarin / iOS project, and looking to use Azure File Share as a back-end.
With that in mind, I'm playing around with the REST API and have generally got things working with (a) Blobs and (b) Account-level access to Files.
Specifically, I can successfully request a list of File Shares, so I have the general call structure worked out.
However, I'm stumped about the exact incantation necessary to create a new directory at the root level of a share.
I've tried the following three variants, but all result in Forbidden - Server failed to authenticate the request
request.Host: myaccount.file.core.windows.net
request.AbsolutePath: /myshare/subdirname1
request.Query: ?restype=directory
string to sign: PUT\n\n\n\n\n\n\n\n\n\n\n\nx-ms-date:Sun, 30 Nov 2014 16:07:25 GMT\nx-ms-version:2014-02-14\n/myaccount/myshare/subdirname1\nrestype:directory
request.Host: myaccount.file.core.windows.net
request.AbsolutePath: /myshare/subdirname1/
request.Query: ?restype=directory
string to sign: PUT\n\n\n\n\n\n\n\n\n\n\n\nx-ms-date:Sun, 30 Nov 2014 16:07:58 GMT\nx-ms-version:2014-02-14\n/myaccount/myshare/subdirname1/\nrestype:directory
request.Host: myaccount.file.core.windows.net
request.AbsolutePath: /myshare//subdirname1
request.Query: ?restype=directory
string to sign: PUT\n\n\n\n\n\n\n\n\n\n\n\nx-ms-date:Sun, 30 Nov 2014 16:06:16 GMT\nx-ms-version:2014-02-14\n/myaccount/myshare//subdirname1\nrestype:directory
I did note that trying to get the contents of an (empty) root directory doesn't behave quite the way I'd expect
request.Host: myaccount.file.core.windows.net
request.AbsolutePath: /myshare/
request.Query: ?resttype=directory&comp=list
string to sign: GET\n\n\n\n\n\n\n\n\n\n\n\nx-ms-date:Sun, 30 Nov 2014 16:23:17 GMT\nx-ms-version:2014-02-14\n/myaccount/myshare/\ncomp:list\nrestype:directory
Authenticates OK, but generates FAILURE BadRequest - The requested URI does not represent any resource on the server.
Which is different behaviour from pulling the list of blobs from an empty container (returns 200 with an empty xml list of blobs.
I've been through the File Service REST API document (dn167006) and found the azurestoragesamples on codeplex, but the former is unclear on working with the root level and the latter is from 2011 and predates File Storage.
Any insights?

First, thank you for the quick response and the suggestion about looking at the response content for the string to sign being used. I wasn't aware of that and obviously it's a fantastic resource for figuring this kind of stuff out.
And what it immediately revealed is it wasn't some subtle oddity in my construction of the STS, it was that I was doing a client.GetAsync(...) and not a client.PutAsync(...). DOH!
With that sorted, it was trivial to fix.
In terms of the List Directories and Files, though, there's still a problem.
FAILURE BadRequest - The requested URI does not represent any resource on the server.
   request.Host: myaccount.file.core.windows.net
   request.AbsolutePath: /myshare
   request.Query: ?resttype=directory&comp=list
   urlQuery: myshare?resttype=directory&comp=list
   string to sign: GET\n\n\n\n\n\n\n\n\n\n\n\nx-ms-date:Sun, 30 Nov 2014 18:40:04 GMT\nx-ms-version:2014-02-14\n/myaccount/myshare\ncomp:list\nresttype:directory
The response XML is
<?xml version="1.0" encoding="utf-8"?>
<Error>
   <Code>InvalidUri</Code>
   <Message>The requested URI does not represent any resource on the server.\nRequestId:33d61aed-001a-0020-0cbd-51aea8000000\nTime:2014-11-30T18:40:04.9712797Z</Message>
   <UriPath>/myshare</UriPath>
</Error>
I originally thought it might be because the share was empty. However, I'm targeting the same share in which I created (apparently successfully) the subdirectory.
So I'm still confuzzled on that.

CCM 2.0 - Files Storage for high volume of files

Hi all,
I have seen in one message the following information:
<i>1. Files storage.
My point is that I think you've created a virtual folder on the SRM Server in SICF, which means that all your files are stored internally in the database, and not physically on the server.
The most simple way is to create a physical folder on the server OS, and then create analias in SICF to this folder. You then will be abble to load in mass the pictures on the server using FTP, or network Share.</i>
I want to upload images in the Catalog (CCM 2.0) and in my case I have high volume of files. Where is the best place to stored this data, in the database or in the server?
And if it is in the server, how I can create an alias?
Many thanks!!
Regards

Hi ,
What we had done for image upload for CCM 2.0 was like this:
1. in SE80 go to MIME repository -> drill down to services -> bc /sap/bsp - >Create a personal folder
2. Import your image .jpeg in this folder.
3. Derive an URL with the structue : server name/domain name/services/file name
4. test this URL in IE browser ,it should open the picture in IE for you.
5. then paste this URL in the characteristic 'image' of an item in master catalog in CAT
with this in EBP we could see the photos of the items.
BR
Dinesh
reward if helps

SQL Server 2008 .MDF File attaching issue

Hy all guys here is big Happy news about the SQL Server 2008 database.mdf file attaching issue on Windows 8.1 and SQL Server 2008
I found the solution like this
first you go to the directory of your computer and go to that folder where your database and other files are like
folder having database and files then > Right click and > security > then give full rights from which user you LOGIN and then apply > ok after that go to SQL Server 2008 > Right Click > run as administrator
Hurray your problem will be resolve I Resolved my issue too thanks to providing every solution
if you guys find solution please give me best regards thanks

Hi Farhan-Islam,
Glad to hear that your issue had been solved by yourself. Thank you for your sharing which will help other forum members who have the similar issue.
Regards,
Lydia Zhang

A way to qeury Azure File Storage direct from Automation?

Hello.
I am trying to create a runbook that will query a list of files in Azure File Storage. This works fine from a powershell prompt on an Azure VM, but it appears the same methods in Azure Automation return different objects:
Sample code to just list the files in a given folder:
workflow Get-AzureFileStorageInfo
# Get Azure File Storage Name and Key
$storageName = Get-AutomationVariable -Name 'File Storage Name'
$storageKey = Get-AutomationVariable -Name 'File Storage Key'
# Get subscription and certificate information
$subscriptionName = Get-AutomationVariable -Name "Subscription Name"
$connection = Get-AutomationConnection -Name "Azure Connection"
$certificate = Get-AutomationCertificate -Name $connection.AutomationCertificateName
# Set the current subscription
Set-AzureSubscription -SubscriptionName $subscriptionName -SubscriptionId $connection.SubscriptionID -Certificate $certificate
Select-AzureSubscription -Current $subscriptionName
# get azure file storage context and share object
#$ctx = New-AzureStorageContext $StorageName $StorageKey
$s = Get-AzureStorageShare -Name $StorageName
# get list of files from Azure File Storage
Write-Output "Files in the DEMO folder..."
$DemoFiles = Get-AzureStorageFile -Share $s -Path "DEMO"
Write-Output $DemoFiles
I get this error when I run it:
6/02/2015 4:54:34 PM, Error: Get-AzureStorageShare : Cannot bind parameter 'Context'. Cannot convert the
"Microsoft.WindowsAzure.Commands.Common.Storage.AzureStorageContext" value of type
"Deserialized.Microsoft.WindowsAzure.Commands.Common.Storage.AzureStorageContext" to type
"Microsoft.WindowsAzure.Commands.Common.Storage.AzureStorageContext".
At Get-AzureFileStorageInfo:25 char:25
+
+ CategoryInfo : InvalidArgument: (:) [Get-AzureStorageShare], ParameterBindingException
+ FullyQualifiedErrorId :
CannotConvertArgumentNoMessage,Microsoft.WindowsAzure.Commands.Storage.File.Cmdlet.GetAzureStorageShare
I am obviously calling it wrong from Azure Automation. Is there sample code online somewhere that can demo the right way to call it? Thanks!
Matt

Perfect. That worked! Thanks!
For others who might be following this I made the change as shown below:
workflow Get-AzureFileStorageInfo
# Get Azure File Storage Name and Key
$storageName = Get-AutomationVariable -Name 'File Storage Name'
$storageKey = Get-AutomationVariable -Name 'File Storage Key'
# Get subscription and certificate information
$subscriptionName = Get-AutomationVariable -Name "Subscription Name"
$connection = Get-AutomationConnection -Name "Azure Connection"
$certificate = Get-AutomationCertificate -Name $connection.AutomationCertificateName
# Set the current subscription
Set-AzureSubscription -SubscriptionName $subscriptionName -SubscriptionId $connection.SubscriptionID -Certificate $certificate
Select-AzureSubscription -Current $subscriptionName
InlineScript {
# get azure file storage context and share object
$ctx = New-AzureStorageContext $Using:StorageName $Using:StorageKey
$s = Get-AzureStorageShare -Context $ctx
# get list of files from Azure
Write-Output "Files in the DEMO folder..."
$DemoFiles = Get-AzureStorageFile -Share $s -Path "DEMO"
Write-Output $DemoFiles

Recording File Size issue CS 5.5

I am using CS 5.5, a Balckmagic Ultra Studio Pro through USB 3.0 being fed by a Roland HD Video switcher. Everything is set for 720P 60fps (59.94) and the Black Magic is using the Motion JPEG compression. I am trying to record our sermons live onto a Windows 7 machine with an Nvidia Ge-Force GTX 570, 16 GB of Ram and a 3TB internal raid array (3 drives). It usually works great but more often now when I push the stop button in the capture window, the video is not proceesed and becomes unusable. Is it a file size issue or what. I get nervous when my recording goes longer than 50 Minutes. Help

Jim thank you for the response. I have been away and busy but getting
caught up now.
I do have all drives formatted as NTFS. My problem is so sporadic that I
can not get a pattern down. This last Sunday recorded fine so we will see
how long it last. Thanks again.

File Storage Issues

Similar Messages

Maybe you are looking for