File System URL alias

Hi Gurus,
I have a requirement wherein the files processed by a sender and receiver file adapter need to be "downloadable" from a http url
So for example the File sender directory is C:\inbound and File Receiver directory is C:\outbound the XI http url will be like this http://hostname.com/50800/DownloadDirectory
the /DownloadDirectory acts like an alias..
and opening this page will show a clickable link for the contents of C:\inbound and C:\outbound file systems, and the processed messages being downloadable like any other web link
How can we do this on an XI 3.0 system on Windows and Unix?

Hi
thanks for the reply
but i am looking for non-scenario based solution
i want it to be done using some configuration in XI WAS settings, or something similar
the way we define the IS URL in sxmb_adm, im looking for that kind of solution whether configuration in abap level or os level?

Similar Messages

File System Repository

Hi all,
I want to create the file system repository for my system .
Here is what i have done.
Created a directory on my local machine and shared it giving the folder full access.
Created a system in CM and system configuration (KM windows system) and I have done user Mapping
Created Network path and I have given my user name and pwd in that.
While creating the file system repository I have given Windows Landscape System as what I have given in CM and Security Manager as W2ksecurity Manager.
But it shows the following error in component Monitoring.
Startup error: The local root does not exist:
172.25.12.154\smilies
I have reffered the following link
[Integrating Documents from a Windows System into KM |http://help.sap.com/saphelp_nw04/helpdata/en/ed/b334ea02a2704388d1d2fc3e4298ad/frameset.htm]
What is the problem? Whether I have missed anything ?
Thanks & Regards,
Hemalatha J

Hi Hema,
1. Does the User specified in Network Path have full access to specified folder?
2. Check the Host within URL Generator Service (Content Management -> Global Services -> URL Generator Service)
3. Check your KM-Windows System (User Mapping Type = admin,user?)
4. Did you define an Alias for you KM-Windows System? The Property Windows Landscape System within the FileSystem Repository must point to the Alias name of your KM-Windows System
Best regards,
Denis

WEBDAV FILE SYSTEM, user name and password changed

Getting prompt as follows, WebDAV File System Authentication,
Enter your user name and password to access the server at the URL "http://idisk.mac.com/bobbiealiaswink/" in the realm "idisk.mac.com."
User name and password were changed recently by Mobile Me, now either or neither
are being recognized by prompt. Constant reminders every few minutes since upgrading Safari two day ago....I am going buggy with prompts...have tried every possible configuration. Is there a way to enter new access area to enter new username and password?

Hi Alias Bobbie, and a warm welcome to the forums!
If this doesn;t help...
http://discussions.apple.com/thread.jspa?threadID=2082353&tstart=0
Try this...
http://support.apple.com/kb/ts1544

How to display a dynamic image file from url?

Hey,I want to display a dynamic image file from url in applet.For example,a jpg file which from one video camera server,store one frame pictur for ever.My java file looks like here:
//PlayJpg.java:
import java.awt.*;
import java.applet.*;
import java.net.*;
public class PlayJpg extends Applet implements Runnable {
public static void main(String args[]) {
Frame F=new Frame("My Applet/Application Window");
F.setSize(480, 240);
PlayJpg A = new PlayJpg();
F.add(A);
A.start(); // Web browser calls start() automatically
// A.init(); - we skip calling it this time
// because it contains only Applet specific tasks.
F.setVisible(true);
Thread count = null;
String urlStr = null;
int sleepTime = 0;
Image image = null;
// called only for an applet - unless called explicitely by an appliaction
public void init() {
               sleepTime = Integer.parseInt(getParameter("refreshTime"));
          urlStr = getParameter("jpgFile");
// called only for an applet - unless called explicitely by an appliaction
public void start() {
count=(new Thread(this));
count.start();
// called only for applet when the browser leaves the web page
public void stop() {
count=null;
public void paint(Graphics g) {
try{
URL location=new URL(urlStr);
image = getToolkit().getImage(location);
}catch (MalformedURLException mue) {
               showStatus (mue.toString());
          }catch(Exception e){
          System.out.println("Sorry. System Caught Exception in paint().");
          System.out.println("e.getMessage():" + e.getMessage());
          System.out.println("e.toString():" + e.toString());
          System.out.println("e.printStackTrace():" );
          e.printStackTrace();
if (image!=null) g.drawImage(image,1,1,320,240,this);
// called each time the display needs to be repainted
public void run() {
while (count==Thread.currentThread()) {
try {
Thread.currentThread().sleep(sleepTime*1000);
} catch(Exception e) {}
repaint(); // forces update of the screen
// end of PlayJpg.java
My Html file looks like here:
<html>
<applet code="PlayJpg.class" width=320 height=240>
<param name=jpgFile value="http://Localhost/playjpg/snapshot0.jpg">
<param name=refreshTime value="1">
</applet>
</html>
I only get the first frame picture for ever by my html.But the jpg file is dynamic.
Why?
Can you help me?
Thanks.
Joe

Hi,
Add this line inside your run() method, right before your call to repaint():
if (image != null) {image.flush();}Hope this helps,
Kurt.

Download file from URL using ADF (urgent help required)

We have the following requirement:
On clicking a button we need to download the file present at a particular location(we have the URL).
I have written the following in .jspx file :
<af:commandButton id="btn1" >
                    <af:fileDownloadActionListener contentType="text/plain; charset=utf-8" method="#{bean.getFile}"/>
</af:commandButton>
The corresponding method in bean is :
public void getFile(FacesContext facesContext, OutputStream outputStream) {
HttpServletResponse response = null;
ServletOutputStream ouputStream = null;
currUrl = getFileURL("ID", 281);
response =
(HttpServletResponse)FacesContext.getCurrentInstance().getExternalContext().getResponse();
try {
ouputStream = response.getOutputStream();
ouputStream.write(this.getFileBytes(), 0,this.getFileBytes().length);
ouputStream.flush();
ouputStream.close();
} catch (IOException ioe) {
System.out.println("IO Exception");
public byte[] getFileBytes() {
URLConnection urlConn = null;
InputStream iStream = null;
URL url;
byte[] buf;
int byteRead;
try {
url= new URL("http://hjhj:34104/test.pdf");
urlConn = url.openConnection();
iStream = urlConn.getInputStream();
buf = new byte[5000000];
byteRead = iStream.read(buf);
if (byteRead > 0) {
System.out.println("Downloaded Successfully.");
return buf;
} catch (FileNotFoundException fnfe) {
System.out.println("File not found Exception");
fnfe.printStackTrace();
} catch (Exception e) {
System.out.println("Exception:" + e.getMessage());
e.printStackTrace();
} finally {
try {
iStream.close();
} catch (IOException e) {
System.out.println("IO Exception");
e.printStackTrace();
System.out.println("File");
return null;
The file is opening in same window but in some encrypted format. My requirement is to :
1. Have a pop (as in Mozilla or IE) which asks if I want to save the file or open.
2. Depending on that the file should be opened in pdf format and not in browser same window neither in browser tab.

Jdev version : 11.1.2.1.0
in .jspx file : we have a button. On clicking the button file from URL should be downloaded. I have used fileDownloadActionListener in commandButton. Corresponding code :
<af:commandButton id="btn1" >
                    <af:fileDownloadActionListener contentType="text/plain; charset=utf-8" method="#{bean.getFile}"/>
</af:commandButton>
in bean class : the method corresponding to fileDownloadActionListener is :
public void getFile(FacesContext facesContext, OutputStream outputStream) {
     HttpServletResponse response = null;
     ServletOutputStream ouputStream = null;
     response =(HttpServletResponse)FacesContext.getCurrentInstance().getExternalContext().getResponse();
     try {
          ouputStream = response.getOutputStream();
          ouputStream.write(this.getFileBytes(), 0,this.getFileBytes().length);
          ouputStream.flush();
          ouputStream.close();
          } catch (IOException ioe) {
               System.out.println("IO Exception");
public byte[] getFileBytes() {
     URLConnection urlConn = null;
     InputStream iStream = null;
     URL url;
     byte[] buf;
     int byteRead;
     try {
          url= new URL("http://hjhj:34104/test");
          urlConn = url.openConnection();
          iStream = urlConn.getInputStream();
          buf = new byte[5000000];
          byteRead = iStream.read(buf);
          if (byteRead > 0) {
               System.out.println("Downloaded Successfully.");
          return buf;
    } catch (FileNotFoundException fnfe) {
          System.out.println("File not found Exception");
     } catch (Exception e) {
          System.out.println("IO Exception");
The URL given in the code is for a file which can be a PDF file or an EXCEL file.
My requirement is when i click the button:
1. A pop should come (as in Mozilla or IE) which asks if I want to save the file or open.
2. if i click on save file should save in a particular location.
3. if i click on open it should open as PDF/EXCEL format and NOT in browser.
Message was edited by: 1001638

Powershell: There is no file with URL error during file upload.

I am trying to put together a PowerShell script that I could use to upload files from a local directory, into a Document Library in a Record Center Site. Here is what my script looks like...
#Open web and library
$web = Get-SPWeb $webUrl
$docLibrary = $web.Lists[$docLibraryName]
$files = ([System.IO.DirectoryInfo] (Get-Item $localFolderPath)).GetFiles()
Write-Host "Local Directory:" $localFolderPath
ForEach($file in $files)
Write-Host "Looping through files"
Write-Host "Current file:" $file
ElseIf ($contentType = "MyContentType")
#Open file
$fileStream = ([System.IO.FileInfo] (Get-Item $file.FullName)).OpenRead()
# Gather the file name
$FileName = $File.Name
#remove file extension
$NewName = [IO.Path]::GetFileNameWithoutExtension($FileName)
#split the file name by the "-" character
$FileNameArray = $NewName.split("_")
$check = $FileNameArray.Length
#Add file
$folder = $web.getfolder($docLibraryUrlName)
write-host "Copying file " $file.Name " to " $folder.ServerRelativeUrl "..."
$spFile = $folder.Files.Add($folder.Url + "/" + $file.Name, [System.IO.Stream]$fileStream, $true)
$spItem = $spFile.Item
write-host "Success"
#populate columns
$spItem["Application Number"] = $FileNameArray[0].ToString()
$spItem["Site Number"] = $FileNameArray[1].ToString()
$spItem.Update()
$fileStream.Close();
Each time I run my script, I get this error message
Exception calling "Add" with "3" argument(s): "<nativehr>0x80070003</nativehr><nativestack></nativestack>There is no file with URL 'http://myRecordLibrarySite/myRecord Library/12587_B2317.PDF' in this Web."
At C:\powershellscripts\Upload-FilesIntoSharePoint.ps1:72 char:6
+ $spFile = $folder.Files.Add($folder.Url + "/" + $file.Name, [System.IO.Stre ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [], MethodInvocationException
+ FullyQualifiedErrorId : DirectoryNotFoundException
I have not been able to nail down why the script is failing. Any ideas why? Thanks for the help.

I just figured out the issue with adding the file. I went in this direction, and my code has progressed forward.
$folder = $web.getfolder($docLibrary.rootFolder.URL)

Not able to run adadmin adfter installing R12 Upgrade file system

Sawwan,
Now we are doing 11i apps to R12 upgrade single node, before we did database upgrade 9i to 10.2.0.4,
I successfully installed R12 upgrade file system with out any errors, i have chagned the
new Installation creates APPL_TOP, COMMON_TOP, INST_TOP and 10g Oracle Home
i moved the new environment file into .bash_profile
mv .bash_profile .bash_profile_11.5.10
Iset the R12 environment , When ever i tried to run adadmin system manager password is not taking its giving error
[applupg@peabody appl]$ adadmin
Copyright (c) 2002 Oracle Corporation
Redwood Shores, California, USA
Oracle Applications AD Administration
Version 12.0.0
NOTE: You may not use this utility for custom development
unless you have written permission from Oracle Corporation.
Your default directory is '/u01/R12/apps/apps_st/appl'.
Is this the correct APPL_TOP [Yes] ?
AD Administration records your AD Administration session in a text file
you specify. Enter your AD Administration log file name or press [Return]
to accept the default file name shown in brackets.
Filename [adadmin.log] :
************* Start of AD Administration session *************
AD Administration version: 12.0.0
AD Administration started at: Sat Apr 18 2009 06:12:52
APPL_TOP is set to /u01/R12/apps/apps_st/appl
Backing up restart files, if any......Done.
Your previous AD Administration session did not run to completion.
Do you wish to continue with your previous AD Administration session [Yes] ?
You are about to use or modify Oracle Applications product tables
in your ORACLE database 'upg'
using ORACLE executables in '/u01/R12/apps/tech_st/10.1.2'.
Is this the correct database [Yes] ?
AD Administration needs the password for your 'SYSTEM' ORACLE schema
in order to determine your installation configuration.
Enter the password for your 'SYSTEM' ORACLE schema: manager
...Unable to connect.
AD Administration error:
The following ORACLE error:
ORA-12541: TNS:no listener
occurred while executing the SQL statement:
CONNECT SYSTEM/*****
AD Administration error:
Unable to connect to 'SYSTEM'; password may be invalid.
AD Administration needs the password for your 'SYSTEM' ORACLE schema
in order to determine your installation configuration.
Enter the password for your 'SYSTEM' ORACLE schema:
Enter the password for your 'SYSTEM' ORACLE schema:
Before running R12 adadmin is there nessary 11i apps servicess should up or down..
Edited by: HumanDBA on May 5, 2009 12:26 PM

Sawwan,
As a oracle user i am able to see the tns_admin home dir
[oraupg@peabody upg_peabody]$ echo $TNS_ADMIN
/stage/10gsoftware/network/admin/upg_peabody
[oraupg@peabody upg_peabody]$
After installing R12 uprade file system i am able do the tnsping
[applupg@peabody appl]$ tnsping upg
TNS Ping Utility for Linux: Version 10.1.0.5.0 - Production on 18-APR-2009 06:26:49
Copyright (c) 1997, 2003, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION= (ADDRESS=(PROTOCOL=tcp)(HOST=peabody)(PORT=1526)) (CONNECT_DATA=(SID=upg)))
TNS-12541: TNS:no listener
[applupg@peabody appl]$
[applupg@peabody appl]$ sqlplus apps/xxxx@upg
SQL*Plus: Release 10.1.0.5.0 - Production on Sat Apr 18 06:29:45 2009
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-12541: TNS:no listener
Enter user-name:
========================================
Sawwan
after installing i am trying to apply R12.AD.B patch, do we need to apply this patch in 11i fiile system or New R12 file system, for 11i file system i am not getting any issue, but when ever i set the R12 new file system enviroment file then only i am not able to connect the database,i have changed new port numbers in R12 file system, is that causing any issues..?
Edited by: HumanDBA on May 5, 2009 12:37 PM

TCODE for acceess server file system

Hello Gurus,
how can I get into file system for sap application server using TCODE ? . I just want to download a flat file from server to local.
Many thanks,
Frank Zhang

Hi Frank,
Are you able to load the files in local workstation...or else you copy like one more thing as ask the URL of those files and then load it from tehre...if they are huge save then in sap business workplace and then you can copy at your desk top...
Regards
Srinivas

How to get the local file system path of an image that loaded into the image component in cq5?

Hi,
I'm having hard time uploading image from filesystem where as drag and drop works.
I'm not getting a path of image selected from filesystem.
here is my code..
private String populateImage() throws Exception {
                    if (currentNode != null && currentNode.isNode()) {
                                   Node ImageNode = JcrResourceUtil.createPath(currentNode, "image",
                                                                      null, "nt:unstructured", true);
                                   imageUrl = ImageNode.hasProperty("fileReference") ? ImageNode.getProperty("fileReference").getValue().getString() : "";
       imageUrl = imageUrl.trim();
        log.info("MANAGE PROFILE BEAN IMAGE URL INSIDE IF IS: " + imageUrl);
                    } else {
                                        imageUrl = properties.get("fileReference", "");
                                        imageUrl = imageUrl.trim();
                                        log.info("MANAGE PROFILE BEAN IMAGE URL INSIDE ELSE IS: " + imageUrl);
                    return imageUrl;
So if I drag and drop..
ImageNode.hasProperty("fileReference") is returning a valid path
but if I upload an image it is returning Null.
So how to get the path? any suggestions around would be appreciated...

When you say path you mean you want the path to print out in your HTML? Is that accurate? If so you generally need to constructe that path based on the path to the current component. So if you component is located at /content/mysite/en/about/mypage/jcr:content/parsys/image then the path to the image would generally be something like /content/mysite/en/about/mypage/jcr:content/parsys/image.img.jpg/1283829292873.jpg. The .img. selector triggers the servlet associated with the foundation parbase - /libs/foundation/components/parbase/img.GET.java. The reason you reference it this way is that there is no filesystem path to the image - it is stored in the repository not on the file system, and it requires a servlet or script to ge the binary from the repository and steam it.
Normally the way you'd construct this is to use the out of the box Image class - so look at /libs/foundation/components/image/image.jsp. Now this example assumes that your component where you loaded the image extends /libs/foundation/components/parbase. If it doesn't then you either have to change your sling:superResourceType to /libs/foundation/components/parbase or some other component that does exten /libs/foundation/components/parbase.

Deliver a report in XML format and save it to local file system on the server

We have OBIEE 10.1.3.4 on Redhat linux. We want to have generate a report in XML format and saved it to the server's file system. Did not realize this is s difficult task. Basically
1) How to create a XML report? It is not listed in the output items of a layout template.
2) How to deliver XML the report to local file system. Look into the Delivery section of Admin page. FTP should be the best choice, but does that means that one need to install and run ftp server on the BI server box?
Thanks

Hi,
Since I still have problems on this subject, I would like to share on how it progresses.
Currently I have a problem of timeout in step "Truncate XML Schema" with the URL that I mentioned above.
The exact error is the following : 7000 : null : com.sunopsis.sql.l: Oracle Data Integrator TimeOut : connection with URL [...]
The connection test is still OK.
I tried to increase the value in the user's pref but there's no change.

Uploading document using Powershell is throwing error- There is no file with URL

Hi.
I am trying to upload multiple documents to a sub folder in a library using powershell.
I am getting the error as : ForEach-Object : Exception calling "Add" with "3" argument(s):
"<nativehr>0x80070003</nativehr><nativestack></nativestack>There is no file
with URL 'server/TestLibrary/User_image/ab_3f_wht_ist_small_gif.gif' in this Web."
I have used the below code:
function UploadImages($weburl)
$docLibraryName = "TestLibrary"
$localFolderPath = "C:\Users\Imgs\user_image"
Add-PsSnapin Microsoft.SharePoint.PowerShell -erroraction silentlycontinue
$web = Get-SPWeb -Identity $webUrl
$docLibrary = $web.Lists[$docLibraryName]
$subFolderName="user_image"
Add-PsSnapin Microsoft.SharePoint.PowerShell -erroraction silentlycontinue
$web = Get-SPWeb -Identity $webUrl
$docLibrary = $web.Lists[$docLibraryName]
#Attach to local folder and enumerate through all files
$files = ([System.IO.DirectoryInfo] (Get-Item $localFolderPath)).GetFiles() | ForEach-Object {
#Create file stream object from file
$fileStream = ([System.IO.FileInfo] (Get-Item $_.FullName)).OpenRead()
$contents = new-object byte[] $fileStream.Length
$fileStream.Read($contents, 0, [int]$fileStream.Length);
$fileStream.Close();
write-host "Copying" $_.Name "to" $docLibrary.Title "in" $web.Title "..."
#Add file
$folder = $web.getfolder($docLibrary.Title + "/" + $subFolderName)
write-host "folder is " $folder
$spFile = $folder.Files.Add($folder.Url + "/" + $_.Name, $contents, $true)
$spItem = $spFile.Item
Write-Host -f Green "Added Images to Library !!!"
$web.Dispose()
How to fix this?
Thanks

HI,
Is the name of the image or the sub folder name the issue?
I have the images with the name as "ab_3f_wht_ist_small_gif.gif". folder name "User_image"
There are underscores on the file name, but there is no space. When I add the file from the library (using the UI), the image is getting added.
But adding through the powershell is giving the issue.
I have checked this:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/e810ad03-81ef-4fa6-aab8-ddc896a13ebf/getting-error-during-uploading-a-document-using-powershell?forum=sharepointdevelopmentprevious
but did not help.
Thanks

Hyperlink to pdf on the local file system

Hello,
I'm using Oracle Reports 6i. I'm trying to set hyperlinks in my report through the pl/sql command srw.set_hyperlink to another pdf document.
When I set the hyperlink to a URL, eg, http://localhost/document.pdf#dest, it works fine, the pdf opens in IE to the destination. Now when I specify the link to a file on the local file system, eg, file:///c|/document.pdf#dest, I get a file not found within IE. If I take out the destination, it works ok, that is, it opens up the document with IE.
What am I doing wrong here? Is there a way to link a report to another pdf to a named destination within the local file system?
Thanks,
Ricky

Ricky,
This is more of IE - PDF issue I guess. Also this problem is seen more specifically for IE + File protocol + PDF
Nothing related to the Reports PDF here. You can try by just referring a PDF section through file protocal in IE and you would see the same behaviour
Thanks
Rajesh

File System Repository - User Mapping not Working

Hi,
I tried to integrate a file system into KM. For doing so, I followed the guide located at [http://help.sap.com/saphelp_nw04/helpdata/en/ed/b334ea02a2704388d1d2fc3e4298ad/frameset.htm|http://help.sap.com/saphelp_nw04/helpdata/en/ed/b334ea02a2704388d1d2fc3e4298ad/frameset.htm].
The only problem is, tht the user mapping doesn't seem to work...
The portal is running on a UNIX system, whereas the file share to be integrated is running on a Windows 2003 Server.
Here are the single steps that I performed:
- Creation of a KM Windows System in the system landscape directory with the ID "MySystem". User Mapping is set to "User,Admin"
- Creation of a Windows System in the system landscpe of the KM with the ID "MySystem"
- Creation of a Network Path in KM with following settings:
jCIFS Protocol is activated; Network Path = "
My Server\My Share"; User = "My Windows Domain\My User" and the according password. The specified user has administration permissions on the server.
- Creation of a readonly File System Repository Manager with following settings:
Root-Directory = "
My Server\My Share", SecurityManager = W2kSecurityManager, ACL Manager Cache = ca_rsrc_acl, Windows Landscape System = "MySystem"
- Configuration of the W2KSecurityManager: I specified the DomainFile-setting as "/etc/companydomaincontrollers.txt"
and placed such a file in the KM with following setting: "My.Server.Domain=According IP Adress"
- In UME I carried out user mapping for index_service user and placed the above mentioned admin user into the user mapping.
Result: The indexing works fine, all fles are indexed. When I however try to carry out a user mapping for a "normal" portal user in the UME it doesn't work: The portal user has no access to the file system. (I used the same admin user for mapping... so it should work).
Any help is appreciated...
P.S. With portal super admin users I can however access the fle system repository, even without user mapping. But I think this is ok, because I read in one forum message that admin users have always access in general....

>
Frank Friedrich wrote:
> Hi Clemens,
>
> so the good think is that indexing is working and you can navigate with your admin portal user through the file system repository. In this case the most configuration settings must be correct.
>
> I am not quite sure regarding your System objects with the ID "MySystem". Do you have as well define an Alias Name for this System Object with the same name "MySystem" ? As well upper and lower letters are important.
>
> Because the reference is all the time the Alias name and not the ID or Name of your System object.
>
> Best regards
> Frank
Hi Frank,
thanks for your reply.
I have as well definied an Alias Name with exactly the same id. So this gives us following:
System landscape directory: KM Windows System with id="MySystem" and Alias="MySystem"
KM System Landscape: Windows System with id="MySystem"
In the created file system repository manager I also set "MySystem" for the Windows Landscape System parameter.
So I think that this should be correct (I also considered upper- and lowercase letters).
Maybe the probem lies in specifying the domain names? When I applied user mapping I always additionally specified the Windows domain name of the users, which is correct I think.
In the security manager configuration for the domain controllers (-> [http://help.sap.com/saphelp_nw04s/helpdata/en/a9/c54e9e09448d46b73d154e93d5e995/content.htm]) I however mapped the network domain of the file share server to the according IP adress. Maybe this is wrong?

First PKGBUILD: fsv2 (3D File System Visualizer, gtk2 port)

The purpose of this thread is to see whether the PKGBUILD is correct/adequate and whether there is interest in this package.
I have managed to create a working PKGBUILD for fsv2 based on the one for the original fsv and the wiki prototype. The guidelines state that the package has to be useful - "more than a few people" would have to be interested. The original fsv PKGBUILD is out of date and the last comment is nine months old, but one can hope.
It seems illogical that a program with a GUI suggests a text-based browser to view the provided documentation. I've left it in the PKGBUILD just in case, but one could easily suggest a different browser or perhaps use a simple text editor to view the documentation. Also, I have not tested it on x86-64 since I do not have access to such a machine.
pkgname=fsv2
pkgver=1.1.0
pkgrel=1
pkgdesc="gtk2 port of fsv, the 3D File System Visualizer as seen in Jurassic Park"
arch=('i686' 'x86_64')
url="http://fedorchenko.net/fsv2.php"
license=('LGPL')
depends=('xorg-server' 'gtkglarea' 'gdk-pixbuf2' 'ftgl' 'gtkmm')
#optdepends=('lynx: help browser')
options=('!libtool')
source=(http://fedorchenko.net/src/${pkgname}-${pkgver}.tar.bz2)
md5sums=('3a8e5e6a9b2e5cdc7a111765a2f18599')
build() {
cd "$srcdir/$pkgname-$pkgver"
./configure --prefix=/usr
make
package() {
cd "$srcdir/$pkgname-$pkgver"
make DESTDIR="$pkgdir/" install
Edit: fixed namcap errors and warnings
Last edited by al (2012-01-19 05:23:10)

I did some corrections:
pkgname=fsv2
pkgver=1.1.0
pkgrel=1
pkgdesc="GTK2 port of fsv, the 3D File System Visualizer as seen in Jurassic Park"
arch=('i686' 'x86_64')
url="http://fedorchenko.net/fsv2.php"
license=('LGPL')
depends=('ftgl' 'gtkglarea' 'gtkmm')
#optdepends=('lynx: help browser')
options=('!libtool')
source=("http://downloads.sf.net/sourceforge/${pkgname}/${pkgname}-${pkgver}.tar.bz2")
md5sums=('3a8e5e6a9b2e5cdc7a111765a2f18599')
build() {
cd "$srcdir/$pkgname-$pkgver"
./configure --prefix=/usr
make
package() {
cd "$srcdir/$pkgname-$pkgver"
make DESTDIR="$pkgdir/" install
# vim:set ts=2 sw=2 et:
Looking at namcap output on PKGBUILD and built package will help you a lot.
Remember to put the Maintainer tag at the beginning.
BTW, I suggest that you take care of gtkglarea package as well, since the current AUR one is not good at all.
Here's my take on it (tested):
# Contributor: arjan <[email protected]>
# Contributor: Tom Newsom <[email protected]>
# Contributor: Luca Bennati <lucak3 AT gmail DOT com>
# Maintainer: Andreas B. Wagner <[email protected]>
pkgname=gtkglarea
pkgver=2.0.1
pkgrel=2
pkgdesc="GTK/GL Area libraries"
arch=('i686' 'x86_64')
url="http://mono-project.com/GtkGLArea"
license=('LGPL')
depends=('gtk2' 'mesa')
options=('!libtool')
source=("http://ftp.gnome.org/pub/GNOME/sources/${pkgname}/2.0/${pkgname}-${pkgver}.tar.gz")
md5sums=('2a81a86cfa80a920a5454dd00fad2e1d')
build() {
cd "${srcdir}/${pkgname}-${pkgver}"
sed -r -i -e '5 a\AC_CONFIG_MACRO_DIR([m4])' configure.ac
sed -r -i -e 's/(ACLOCAL_FLAGS =)/\1 -I m4/' Makefile.am
sed -r -i -e 's/(LDADD =)/\1 -lm/' examples/Makefile.am
sed -r -i -e 's/(Libs: .*)/\1 -lm/' gtkgl-2.0.pc.in
libtoolize --copy --force
autoreconf -vfi
./configure --prefix=/usr --with-lib-GL
make
package() {
cd "${srcdir}/${pkgname}-${pkgver}"
make DESTDIR="${pkgdir}" install
# vim:set ts=2 sw=2 et:
Remember to adjust the Maintainer tag if you adopt this one.
I built and tested successfully gtkglarea and fsv2.

I can not download any files using Safari ? when I choose to download application file the URL include the file name and stop responding. Any help??

I can not download any files using Safari ? when I choose to download application file the URL include the file name and stop responding. Any help??

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box.
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem(s)?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault in Mac OS X 10.7 or later, then you can’t enable the Guest account. The Guest login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled under Mac OS X 10.7 or later, you can’t boot in safe mode.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

File System URL alias

Similar Messages

Maybe you are looking for